So Upset Can Someone Answer This ???

I Have the 60 gig and ive noticed a couple songs are causing my ipod to i guess restart what the heck is going on, like ive discovered 3 have already done this, and they still are working on itunes, whats wrong with my ipod

I Have the 60 gig and ive noticed a couple songs are
causing my ipod to i guess restart what the heck is
going on, like ive discovered 3 have already done
this, and they still are working on itunes, whats
wrong with my ipod
Some users have mentioned a problem with their Ipods restarting on their own for no reason. It has also been suggested that this problem might be triggered by certain songs. I have had the same problem since updating to software version 1.2, AND I HAVE IDENTIFIED THE SIMILARITY IN ALL OF MY PROBLEMATIC MP3'S...
THEY ARE ALL ENCODED IN MONO
I do not have any other type of file besides MP3's on my IPOD, and as of yet, I have not had this restarting problem with ANY of my files EXCEPT FOR EVERY ONE of them that is in MONO (as opposed to stereo). There were about 200 hundred of them, so this is no coincidence.
When I have some time I will try to RE-encode these songs in Stereo, and reload them into my Ipod to see what will happen. But I'm going on vacation for a week and will not be able to do this for over a week. If anyone out there has the time, please try this and let us know how it works out.
For the time being, I am removing EVERY file that is encoded in Mono from my Ipod, and hopefully this problem will disappear.

Similar Messages

  • 11G upgrade exam - can someone answer this question

    The study guide I have says the answer is "C"... isnt the answer "D". How does this guy get the resolve privilege? confused???
    Evaluate the following block of code:
    BEGIN
    DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
    acl => 'mycompany-com-permissions.xml',
    principal => 'ACCT_MGR',
    is_grant => TRUE,
    privilege => 'connect');
    DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL (
    acl => 'mycompany-com-permissions.xml',
    host => '*.mycompany.com');
    END;
    What is the outcome of the above code?
    A. It produces an error because a fully qualified host name needs to be specified.
    B. It produces an error because the range of ports associated with the hosts has not been
    specified.
    C. It creates an access control list (ACL) with the user ACCT_MGR who gets the CONNECT and
    RESOLVE privileges.
    D. It creates an access control list (ACL) with the user ACCT_MGR who gets the CONNECT
    privilege but not the RESOLVE privilege.
    Answer: C

    With 11.2 book code fails with:
    SQL> BEGIN
      2  DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
      3  acl => 'mycompany-com-permissions.xml',
      4  principal => 'ACCT_MGR',
      5  is_grant => TRUE,
      6  privilege => 'connect');
      7  DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL (
      8  acl => 'mycompany-com-permissions.xml',
      9  host => '*.mycompany.com');
    10  END;
    11  /
    DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
    ERROR at line 2:
    ORA-06550: line 2, column 1:
    PLS-00306: wrong number or types of arguments in call to 'CREATE_ACL'
    ORA-06550: line 2, column 1:
    PL/SQL: Statement ignoredIf you fix the code, you get:
    SQL> drop user acct_mgr;
    User dropped.
    SQL> create user acct_mgr identified by 123;
    User created.
    SQL> BEGIN
      2  DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (
      3  acl => 'mycompany-com-permissions.xml',
      4  description => 'test',
      5  principal => 'ACCT_MGR',
      6  is_grant => TRUE,
      7  privilege => 'connect');
      8  DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL (
      9  acl => 'mycompany-com-permissions.xml',
    10  host => '*.mycompany.com');
    11  END;
    12  /
    PL/SQL procedure successfully completed.
    SQL> show errors
    No errors.
    SQL> SELECT DECODE(
      2    DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(
      3         'mycompany-com-permissions.xml', 'ACCT_MGR', 'resolve'),
      4    1, 'GRANTED', 0, 'DENIED', NULL) PRIVILEGE
      5  FROM DUAL;
    PRIVILE
    DENIEDIf your book is supposed to deal with 11G release 2 I think you can buy another one.

  • Can Someone Answer This For Me?!?!

    i got the kin one 3 days ago...i dont really like it that much because i cant view videos or download apps or really do anything that a smartphone should do and it is costing my parents $30 dollars extra a month for nothing basically. My question is that can i take the phone back and exchange it for a new one? Isn't there like a 30 day exchange or something with Verizon? I need to know this soon thank you for taking the time and reading this and answering it.

    You have 30 days to return the phone, and your account will return to the status it was before you upgraded.  Or you can exchange the phone for another - but you are only allowed one exchange, so make sure the second one is the one you really want,as that's the one you will keep.

  • Can someone answer this post in the Mac forum?

    b noir or Pac or anyone?
    http://discussions.apple.com/thread.jspa?threadID=696413&tstart=0
    M

    Good catch, I replied too it. Usually when I see post and it says they have a mac I just reply...
    "This is itunes for windows, if your doing this on a mac you need to post in the itunes for mac forum for better help"
    I do that because sometimes even tho it says mac there doing it on there PC or a friends PC.

  • I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. Can someone resolve this problem.

    I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. But in my purchased item library it indicates that you update iPhoto. I am not sure which account the aps store asking. Can someone resolve this problem.

    Contact App Store support. They're the folks who can help with Account issues.
    Regards
    TD

  • Hi can someone keep this simple for me! my iPhone is due for a renewal. but my old laptop that it is backed up to no longer works! how do i go about saving all my songs pics etc to a new laptop without losing anything? please help!!!

    hi can someone keep this simple for me! my iPhone is due for a renewal. but my old laptop that it is backed up to no longer works! how do i go about saving all my songs pics etc to a new laptop without losing anything? please help!!!

                     Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • Where should I set up my FTP server if I have no money to spend? I would prefer if someone answers this quickly as I want this site up and running soon.

    Where should I set up my FTP server if I have no money to spend? I would prefer if someone answers this quickly as I want this site up and running soon.

    Ethmoid is right... There ARE free web hosts, but... as the old saying goes "You get what you pay for" and if you pay nothing?
    Most free web hosts are riddled with ads, and some are even hosts to malware. DO YOUR RESEARCH before committing to anything.
    While some ISP's do provide free hosting, there are limitations with many of them, such as monthly bandwidth and file storage. You may not be able to get your whole site upto the server (depending on how big it is), or it may be down several days a month due to "excessive" traffic. Again - DO YOUR RESEARCH before committing to anything.
    There are also a lot of services that run in the range of $4-7 a month for feature filled, bandwidth enabled hosting. Dreamhost is offering two domains for $3.95 a month right now. I use ICDSoft (have since 2003) and they're $7 a month, but they offer a lot for that.
    Lastly, you want to look at SUPPORT. If your site goes down, and your "free" host is nowhere to be found.... It's as bad as having no site at all, if you cant get it fixed and no one can access your URL for days on end.

  • Can someone perform this speaker test for me please

    Hi can someone perform this test for please, play some ipod music through your phone and and cover 1 speaker at a time with you finger, does 1 block out the music as if one speaker is much louder than the other ? just I have tried this on my new iphone 4 as thought it might be a problem but my 3GS is doing it to ??, is it fault or meant to be like that

    There's only one speaker.
    http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf

  • Multithreading - Can someone explain this ...

    Hi Java Gurus:
    Can someone explain this to me why my multithreading worked in once case and not in the other.
    First a little background:
    My application lets the user create multiple JInternalFrames. Each frame has an OK button. When the user presses the OK button, the frame goes about it's business in a new thread, thus returning control to the use, so he/she can press the OK button on the second frame .. and so on.
    Following is the event handler for the OK button that creates the new thread:
    case1 - doesn't work:
          btnTranslate.addActionListener(
             new ActionListener() {
                public void actionPerformed( ActionEvent e ) {
                             txtOutput.setText("");
                             txtBadParts.setText("");
                   Translation trans = new Translation(inst);
                   trans.run();
          );case2 - works:
          btnTranslate.addActionListener(
             new ActionListener() {
                public void actionPerformed( ActionEvent e ) {
                             txtOutput.setText("");
                             txtBadParts.setText("");
                       new Translation(inst).start();
          );Thanks,
    Kamran

    Calling the run method makes the run method run in the current thread. You need to call the start method to get the thread to start its own thread.

  • Can someone execute this program?

    Can someone execute this program for me and tell me if it works correctly? My DOS is acting funny.
    look for these things:
    - accepts input from keyboard and places them into an array
    - continues to accept names until a blank name is entered
    - array can contain up to 15 names
    - after all names are entered, it displays the contents of the array
    and writes them to a file
    - output should be in 2 columns
    if you see a problem, please tell me how to fix it.
    import java.io.*;
    * the purpose of this program is to read data from the keyboard
    * and put it into a sequential file for processing by ReadFile
    * @author Maya Crawford
    public class Lab0
    * this function will prompt and receive data from the keyboard
    * @return String containing the data read from the keyboard
    * @param BufferedReader that is connected to System.in
    */ (keyboard)
    public static String getData(BufferedReader infile)
    throws IOException
    System.out.println("enter a name");
    return infile.readLine();
    * this is the main program which will read from the keyboard and
    * display the given input onto the screen and also write the data
    * to a file
    * @param Array of Strings (not used in this program)
    public static void main(String[] args)
    throws IOException
    int i;
    String[] outString = new String[16];
    DataOutputStream output=null;
    // this code assigns the standard input to a datastream
    BufferedReader input= new BufferedReader(new InputStreamReader(System.in));
    // this code opens the output file...
    try
    output= new DataOutputStream(new FileOutputStream("javaapp.dat"));
    // handle any open errors
    catch (IOException e)
    System.err.println("Error in opening output file\n"
    + e.toString());
    System.exit(1);
    // priming read......
    for(i=0;i<outString.length;i++)
    outString=getData(input);
    // this is the loop to continue while nnonblank data is entered
    while (!outString.equals(""))
    for(i=0;i<outString.length;i++)
    outString[i]=getData(input);
    outString[i] = input.readLine();
    System.out.println("Name entered was:"+ outString[i]);
    output.writeBytes(outString[i]+"\r\n");
    int rcol=(outString.length+1)/2;
    for(i=0;i<(outString.length)/2;i++)
    System.out.println(outString[i]+"\t"+outString[rcol++]);
    // flush buffers and close file...
    try
    output.flush();
    output.close();
    catch (IOException e)
    System.err.println("Error in closing output file\n"
    + e.toString());
    // say goodnight Gracie...
    System.out.println("all done");

    Ok, here is what I came up with. I commented most of what I changed and gave a reason for changing it. My changes aren't perfect and it still needs to be tweeked. When you run the program you have to hit the enter key every time once before you type a name. When you are done typing names hit the enter key twice and it will output the names entered into the array. Like I said, it isn't perfect, and that part you will need to fix.
    import java.io.*;
    * the purpose of this program is to read data from the keyboard
    * and put it into a sequential file for processing by ReadFile
    * @author Maya Crawford
    public class Lab0
         * this function will prompt and receive data from the keyboard
         * @return String containing the data read from the keyboard
         * @param BufferedReader that is connected to System.in
         */ //(keyboard)
         //On the above line where you have (keyboard), it wasn't commented out in your
         //program and it was throwing a error.
         public static String getData(BufferedReader infile)
         throws IOException
              System.out.println("enter a name");
              return infile.readLine();
         * this is the main program which will read from the keyboard and
         * display the given input onto the screen and also write the data
         * to a file
         * @param Array of Strings (not used in this program)
         public static void main(String[] args)
         throws IOException
              int i;
              String testString; // Created to hold the string entered by the user, because your
                                 // outString array wasn't working for that.
              String[] outString = new String[16];
              DataOutputStream output=null;
              // this code assigns the standard input to a datastream
              BufferedReader input= new BufferedReader(new InputStreamReader(System.in));
              // this code opens the output file...
              try
                   output= new DataOutputStream(new FileOutputStream("javaapp.dat"));
              // handle any open errors
              catch (IOException e)
                   System.err.println("Error in opening output file\n"
                   + e.toString());
                   System.exit(1);
              // priming read......
              testString = " ";  // Initialize testString
              int placeMark = 0; // to input the String entered by the user into the outString
                                 // array, it needs to know which position to enter it into.
              while (!testString.equals(""))
                   testString=getData(input);
                   testString = input.readLine();
                   System.out.println("Name entered was:"+ testString);
                   // Put the testString into the outString[] array.
                   // A lot of the time when you used outString you forgot to use the [x] to indicate
                   // which position you wanted to access.
                   outString[placeMark] = testString;
                   output.writeBytes(testString+"\r\n");
                   placeMark++;
            // Created a do/while loop to display the list of outString.
              int nextEntry = 0;
              do
                   System.out.println(outString[nextEntry]);
                   nextEntry++;
              }while(!outString[nextEntry].equals(""));
              // flush buffers and close file...
              try
                   output.flush();
                   output.close();
              catch (IOException e)
                   System.err.println("Error in closing output file\n"
                   + e.toString());
              // say goodnight Gracie...
              System.out.println("all done");
    }

  • Can someone translate this vi to LV 5.0?

    Can someone translate this vi to LV 5.0?
    Thanks
    Gorka
    Attachments:
    Write_Table_and_Chart_to_XL.llb ‏240 KB

    Try this one.
    Hope it works!
    Brian
    Attachments:
    Write_Table_and_Chart_to_XL50.llb ‏163 KB

  • Can someone awnser this question please

    '\ my sound card and my tv is digital but my stereo surround system is analogue but my question is.
    how well to the analogue to digital converts work which i can buy for 40 quid.
    will it give me the same quality digital to digital if im using analogue to digital.
    any help will be much apreciated

    +Re: can someone awnser this question pleased
    deebs986 wrote:
    my sound card and my tv is digital but my stereo surround system is analogue but my question is.
    how well to the analogue to digital converts work which i can buy for 40 quid.
    will it give me the same quality digital to digital if im using analogue to digital.
    any help will be much apreciated
    Depends on
    the analog part of A/D Converter and the converter as well ... there are cheap ones which (if you're audiophile)? may give weak results but normally, those are suitable even being that cheap ... you name ones you have in mind to get more exact answers<
    the source ... D to D is : (lossless (theory))? , A to D (lossy (why, ... read above))<
    jutapa
    @9.56.77.37

  • Could someone answer this please.

    Could someone answer this please. I uploaded all my photo's to the cloud from my mac. I then checked on my iPhone and iPad and i could see all 8000 photo's so I deleted them from the mac pro and then set up my mac book air. now I can only see 500 of the 8000 photo's?

    The following is from this Apple document: iCloud: My Photo Stream FAQ
    Does using My Photo Stream substitute for using iCloud Backup or iTunes to back up the photos in my Camera Roll?
    No. Photos in My Photo Stream are saved on the iCloud server for 30 days. To save or back up these photos, you must copy them from My Photo Stream to your Camera Roll on your iOS device. You can then back up your Camera Roll using iCloud or iTunes.
    You should also review this Apple document: My Photo Stream and iCloud Photo Sharing limits
    Bottom line:  iCloud is not a substitute for a local backup of your files including your iPhoto library.  Time Machine and an external HD is the easiest backup strategy to implement.

  • Can someone answer these lovely question about the Zen Vision: M plz

    I know we don't know much yet, so from what what we know, can someone answer me?
    Or can a mod?
    . Will it have the same crap firmware in every Zen mp3 player (Sorry to call it that, but it's my personal opinion)? The main reason I changed to an Ipod was the firmware of the Zen Xtra :\. I loved it, loved the sound quality, but then... I have no need for file manipulation on the mp3 player itself, and it presented a problem. All that added crap made you click 6 times just to play one song!
    And then you had to add an album to your playlist to get it to play...
    After awhile, it drove me nuts... I wanted something simple, I just wanted to play my music, not shuffle thru a bunch of crap to get there!, and went for an Ipod.
    I dunno... one of the reasons I'm liking the look of this is that it copies the Ipod firmware. It seems Creative now knows what it's doing... Or does it's Is the copied part only the front, and I would have to click 6 times to play one song? I must know.
    2. Will it have all the extras of an Ipod, games, contacts, calender, notes, etc? FM radio is a plus.
    3. What is the sound quality on this one?
    4. Will this one... have a headphone jack problem while I own it's Don't take this last question seriously... Or do :X

    Newsboys2004 wrote:. Will it have the same crap firmware in every Zen mp3 player (Sorry to call it that, but it's my personal opinion)? The main reason I changed to an Ipod was the firmware of the Zen Xtra :\. I loved it, loved the sound quality, but then... I have no need for file manipulation on the mp3 player itself, and it presented a problem. All that added crap made you click 6 times just to play one song!And then you had to add an album to your playlist to get it to play...After awhile, it drove me nuts... I wanted something simple, I just wanted to play my music, not shuffle thru a bunch of crap to get there!, and went for an Ipod. I dunno... one of the reasons I'm liking the look of this is that it copies the Ipod firmware. It seems Creative now knows what it's doing... Or does it's Is the copied part only the front, and I would have to click 6 times to play one song? I must know.
    Actually seeing as Creative's firmware came first it would seem Apple copied Creative. The iPod firmware and library manipulation is very similar to the Creative players, having played briefly with an iPod.
    Also you talked before about the difficulty with queuing a track, but couldn't describe a better system. Can you explain how the iPod makes it easier? I don't see any way Creative can make it quicker. You need to access the album/artist, then press the play button. Job done.
    2. Will it have all the extras of an Ipod, games, contacts, calender, notes, etc? FM radio is a plus.
    I doubt games and notes, we've never had anything like this to-date.
    A Mod or owner can tell you for sure of course.
    3. What is the sound quality on this one?
    SnR is allegedly 97dB. Of course the subjecti've sound quality is one for the users to debate when there are shipping and several folks here at least have one. I doubt a Mod can tell you anything different.
    4. Will this one... have a headphone jack problem while I own it's Don't take this last question seriously... Or do :X
    If Creative haven't learned their lesson from the Micro and Xtra, well...

  • Can anyone answer this question about unlimited data?

    I currently have a phone with ATT... a Samsung. Contract has been up for several months.
    I have the unlimited data plan for $30 a month.
    When I buy the new iPhone will I be able to just transfer my $30 a month unlimited data plan from my old Samsung phone to my new iPhone's new 2-year contract? Or, will I have to switch to the new data plan thing (with no more unlimited data)?
    Can anyone answer this? Been looking online for an answer and got zilch. Thanks.

    Why are you asking this in a user-to-user iPhone forum? The ONLY source for a definitive answer about the brand new, not yet implemented AT&T data plans is AT&T. You need to contact them. Any "answer" you get here is purely guesswork.

Maybe you are looking for