So what are we getting for hanging in there?

What are you giving your customers for hanging in there waiting for their phones? It is now the 31st and no word on when my phone will be available. It is now the 31st (when you promised the phones by). I have a feeling the day will come and go with no contact from you saying that my phone is in. I know A LOT of people have jumped shipped and ordered their phones elsewhere. So for the people that are hanging in there, waiting - what are you giving us? And don't say the headphones, because everyone who preordered are getting them.

I didn't stick in there but what I did get was my $50 pre-order gift card cashed out, my $197 trade in gift card cashed out and a complimentary $30 gift card mailed to me.
I wish I was told the truth from the beginning, but they did make up for their mistake in the end.
Will I ever purchase a phone from Best Buy again, probably not, but I will not leave with the feeling of hatred I had 10 days ago.

Similar Messages

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

What are the procedures for getting Apple to remotely wipe all my data off my ipad that was stolen? I have no hope of recovering it. Please advise asap...thanks!

What are the procedures for getting Apple to wipe the data off my original ipad I bought two years ago. I had it stolen from a hotel room over the weekend and it is not password protected and no I did not download app to find it.
Any hwlp would be greting appreciated!

Apple can't do it, only you could potentially do it if you had enabled Find My iPad on it before it was stolen.
If it was stolen then you should report it to the police. As a safety precaution you should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

What are the prerequisite for getting MTTR / MTBR data.

Dear SAP Experts,
I want to know what are the prerequisite for getting MTTR / MTBR data.
Regards
ERP Tech

Pre-requisites are:
Maintain Start date in Equipment / Functional location master
Maintain the Malfunction Start date & time, Malfunction End Date & time in Notification
Maintain the Breakdown tick mark in notification
Maintain update group (stats) in Notification type configuration (IMG - Plant Maintenance & Customer Service - Maintenance & Service Processing - Maintenance & Service Notifications - Notification types - Define Notification types)

What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?

I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube

Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the settings for Transport?

What are the settings for Transport?

u will get three panel in transport connection in BW side
here u need to collect object and drop them to 2nd panel
then u need to select whether u want o select all objects or only necessary objects
select as per ur requirement hten u need to write thse object in a NEw request
now executte nad go to Se10 and relaease sub task and main task
now ask basis team to impot it in QAS test it and again trnasport these to Production environemnt.
assign points if helps

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration?

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration? Do we have any Instructions/steps?

Migration from WCS 7.0 to PI 1.2 can be performed. If the customer wants to migrate data you need to first upgrade to NCS 1.1.1 You can download NCS 1.1.1 from Cisco.com if you have a valid service contract.
For the migration step involving NCS an evaluation license is sufficient. You can obtain an NCS evaluation license from http://www.cisco.com/go/license > Get Demo > Network Mgmt Products > Cisco Prime NCS Evaluation License.
Instructions for migrating data from WCS 7.0 to NCS 1.1.1 are available in NCS 1.1.1 Release Notes. Do not upgrade to NCS 1.1.2 as this release is not upgradeable to Prime Infrastructure 1.2. If you are ordering a Cisco Prime physical appliance (PRIME-NCS-APL-K9) be sure to select the NCS 1.1 image which you can later upgrade to Prime Infrastructure 1.2 after you have migrated your WCS data.
There is a post in the support forum which can be refered.
https://supportforums.cisco.com/docs/DOC-26972

Hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

Legality aside (I'm not a lawyer and have no opinion on the matter) in order to make a purchase of an iPhone 5 you would need to travel to a country where they are for sale and purchase it there. Be sure to get one that is officially unlocked or you would not be able to use it with your cell carrier. Be sure that your carrier supports use of the iPhone before you buy. Also note that the warranty of the iPhone is only valid in the country of purchase.
Appe does not ship outside of the countries where it sells the phones.

What are my options for a data plan + upgrade?

So my old phone (Samsung Intensity) broke today, and I'm looking to upgrade to a smartphone. I would prefer an iPhone, but really it's not that big of a deal if I get a Droid. I'm eligible for an upgrade currently. What are my options for a smartphone and a data plan? I'm looking for what's the cheapest option as far as this goes. People tell me an iPhone is free with an upgrade, and that the cost is $20 a month, but I just want to be sure.

Unless you have an old calling plan, you should be able to add a tiered data plan for your new smartphone (i.e., $30 for 2 GB). If you switched to the Share Everything plan, your monthly cost would be $40 line access + at least $50 for 1 GB data (includes unlimited minutes/texts and mobile hotspot, although the hotspot data usage comes out of your data plan), plus, of course, taxes/fees (and insurance, if applicable).
You can check pricing for phones via your on-line MyVerizon account if you click on the Upgrade button. If you are mainly interested in free phones (keep in mind that there's a $30 upgrade fee), there's the Nokia Lumia 822, Spectrum 2, Droid Razr M, iPhone 4, Galaxy Stellar, Marauder, Rhyme, and the Lucid. Several of those are 3G phones.

What are the wildcards for FILE_MASK in FM EPS_GET_DIRECTORY_LISTING

The wildcard for exactly 1 character is '?'.
example: with mask ????????.STA     , I get the following files:
BWMDAACW.STA
BWMDAADW.STA
BWMDAAEW.STA
BWMDAAFW.STA
BWMDAAGW.STA
(all files ending with .STA, with 8 characters before .STA)
But what is the wildcard for 'any character' ?
I tried with *.STA     , but the result is
test1
test2
test3
test4
y5c01
(all the filenames with exactly 5 characters)
with *STA, the result is
IBAN
PBCL
rfbi
stxh
stxl
(all the filenames with exactly 4 characters)
(the result is the same with *123 or *XYZ !!!)
with BW*, the result is
BWMDAACW.STA
BWMDAADW.STA
BWMDAAEW.STA
BWMDAAFW.STA
BWMDAAGW.STA
as expected, but * seems the right wild character for 'any character' only at the end of the mask; it seems not work as expected when it is not the last character of the mask.
It seems very strange! What are the rules for wildcards ? (I'm in 4.7)
thanks in advance

CONSTANTS DAYS1980     TYPE I VALUE 3652.
DATA: linelength TYPE i VALUE 0.
DATA: linelength1 TYPE i VALUE 0.
DATA: text TYPE string.
DATA: DLIST    LIKE EPSFILI OCCURS 0 WITH HEADER LINE,
      DPATH    LIKE EPSF-EPSDIRNAM,
      PFILE    LIKE EPSF-EPSFILNAM,
      MDATE    LIKE SY-DATUM,
      MTIME    LIKE SY-UZEIT,
      POINT_IN_TIME TYPE I.
DATA: BEGIN OF FATTR OCCURS 0,
          FILE_NAME LIKE EPSF-EPSFILNAM,
          FILE_SIZE LIKE EPSF-EPSFILSIZ,
          FILE_OWNER LIKE EPSF-EPSFILOWN,
          FILE_MODE LIKE EPSF-EPSFILMOD,
          FILE_TYPE LIKE EPSF-EPSFILTYP,
          FILE_MTIME(12),
      END OF FATTR.
PARAMETER P_PATH(50) TYPE C DEFAULT '/TMP' LOWER CASE.
PARAMETER P_FILE(50) TYPE C DEFAULT ' ' LOWER CASE.
DPATH = P_PATH.
PFILE = P_FILE.
CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
     EXPORTING
          DIR_NAME               = DPATH
*          FILE_MASK              = PFILE
     TABLES
          DIR_LIST               = DLIST
     EXCEPTIONS
          INVALID_EPS_SUBDIR     = 1
          SAPGPARAM_FAILED       = 2
          BUILD_DIRECTORY_FAILED = 3
          NO_AUTHORIZATION       = 4
          READ_DIRECTORY_FAILED = 5
          TOO_MANY_READ_ERRORS   = 6
          EMPTY_DIRECTORY_LIST   = 7
          OTHERS                 = 8.
break developer.
IF SY-SUBRC EQ 0.
LOOP AT DLIST.
linelength = STRLEN( DLIST-NAME ).
    linelength = linelength - 3.
linelength1 = STRLEN( P_FILE ).
    linelength1 = linelength1 - 3.
if DLIST-NAME+linelength(3) = P_FILE+linelength1(3).
    CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
         EXPORTING
              FILE_NAME              = DLIST-NAME
              DIR_NAME               = DPATH
         IMPORTING
              FILE_SIZE              = FATTR-FILE_SIZE
              FILE_OWNER             = FATTR-FILE_OWNER
              FILE_MODE              = FATTR-FILE_MODE
              FILE_TYPE              = FATTR-FILE_TYPE
              FILE_MTIME             = FATTR-FILE_MTIME
         EXCEPTIONS
              READ_DIRECTORY_FAILED = 1
              READ_ATTRIBUTES_FAILED = 2
              OTHERS                 = 3.
    IF SY-SUBRC EQ 0.
      FATTR-FILE_NAME = DLIST-NAME.
      APPEND FATTR.
    ENDIF.
    endif.
ENDLOOP.
SORT FATTR BY FILE_NAME.
LOOP AT FATTR.
    POINT_IN_TIME = FATTR-FILE_MTIME.
    CALL FUNCTION 'POINT_IN_TIME_CONVERT'
         EXPORTING
              POINT_IN_TIME = POINT_IN_TIME
         IMPORTING
              DATE          = MDATE
              TIME          = MTIME
         EXCEPTIONS
              OTHERS        = 1.
    SUBTRACT DAYS1980 FROM MDATE.
    WRITE: / FATTR-FILE_NAME,
             FATTR-FILE_SIZE,
             MDATE,
             MTIME.
ENDLOOP.
ENDIF.
Edited by: kk.adhvaryu on Sep 25, 2010 12:08 PM

WCS annual support: what do I get for extra AP license packs?

I am not trying to be snide here, but I am having a difficult time understanding what new value I get for an extra SAU annual support package that my Cisco Partner says I now need, since I added additional AP licenses to the WCS software. This add-on SAU will more than double my annual support costs for the WCS software. I've called and emailed my partner several times on this, and basically it came down to "that's how Cisco does it now." I've also done on-line chat and a couple hours of phone time with Cisco's pre-sales support, and technical support, but neither of them was able to give me any answer, and after passing me back and forth between their two divisions, they passed the buck back to my Cisco partner.
But, my question remains: What additional value do I get for this doubled price "Software Application support with Updates"? I can already download WCS software and WLC firmware. The only thing that has changed is my software's AP limit.
We've had WCS 5.0, with the original Base 50 AP license. The WCS server runs two WLC 4402 units, one set for 25 APs, and one for 50. We actually have 46 APs deployed. We've paid annual support since we first purchased this system, SAU software and upgrade support for the WCS software, and SmartNet hardware support for the WLCs. We have not had support for our actual AP hardware, as our partner recommended just buying spares instead, as a cheaper option. But, AP firmware updates come automagically with the WLC firmware updates.
We will soon be going beyond 50 APs, so we installed an 100 AP add-on license for the WCS. This changed the "About" box for the WCS software so it now says it is licensed for 150 permanent APs, instead of the original 50. (This add-on license cost more than $4,000, so I don't feel that I'm trying to get a bigger WCS system without paying for it.)
Recently I upgraded my WCS software to v5.2 and then to v6, and am currently at 6.0.196.0. I also upgraded my WLC firmware, which updated my APs. Everything seems to be working well, and these updates were all included in my basic SAU for WCS, which runs about $720 per year.
However, March is when our SmartNet renewals come due, and my partner says we now need to buy a second version of WCS SAU, supposedly a requirement with our additional 100 AP license. This add-on support ( part "CON-SAU-WLB100EX" ) goes for $1,080 per year, so my WCS annual support would now be $1,800 instead of $720.
As I said, I really don't understand what I'm getting for this additional money. We are a small enough college that I can't spend $1000 without justifying the expense. Already, with my existing WLC SmartNet payment I get firmware updates for my WLC and AP hardware, and with my existing WCS SAU payment I get software updates on the server. None of this seems to have changed with the additional AP license count.
(Note that although the WCS update package allows 100 more APs, my present WLC hardware really only allows an additional 25 APs.)
If nothing else, for $1,000 a year, Cisco should be able to give me a pithy explanation of what I am buying :-)
In summary:
What does CON-SAU-WLB100EX actually support? Why do I need it?
What happens if I keep paying my CON-SAU-WCS support and my WLC support, but do not add this new charge? Is my WCS software still upgradeable?
Thanks for any insights you can provide,
Steve Bohrer

I'm not selling support contracts, I just work in TAC. But here's my 2 cents :
If you have your license for your extra APs (which you said you already bought), your WCS will run just fine.
With regards to software download, either you have download access or you don't. The system can't prevent you to download WCS because it saw you had purchased more AP license than your support contract mentions. So download should still work in the future.
From a TAC perspective, if there is a support contract, we give support. We don't care at all how many APs people have.
So all considered, I have no idea what this extra support contract will bring you :-)
But since the Sales people in your region don't seem to gifted in explaining what they are selling, I would just go without that special contract unless they justify what it exactly adds and what you will lose if you don't take it. Probably if you don't say a word, they won't notice anything and will still support you nonetheless :-)

What are the ranges for correct skin tones using RGB%?

What are the ranges for correct skin tones using RGB%? Used to using a scale from 0 to 255. But with LR it's RGB , I know 100% RGB is white. What do you use for %?

While I whole heartedly agree that we should not be constrained to hard and fast numbers for accurate skin tones ... LR does offer an RGB color readout ... I am assuming they made those percentages available for the user to monitor the breakdown of specific color values for a reason ... so we could have an indication of how a specific color in an image will be reproduced ...
I liken this to using a speedometer ... while many experienced drivers in well tuned vehicles can travel on the highway at the prescribed legal speed limit without really monitoring the readout on the dashboard ... however, there are times when they would like to verify the speed at which they are traveling ... the RGB color percentage readout in LR is no different ... just a source of information to verify you are achieving what you desire ...
Again, going by specific numbers in this instance, I believe, could lead to problems ... there may be times when you may desire or actually need to adjust skin tones ... even though a pleasing WB has been achieved ... the relationship of R, G and B can be used to get you there.
From what I have researched and put into practice with LR the following seems to be a good starting point and the data was borrowed from "the pixelation" blog:
R: highest %
G: middle %
B: lowest %
To get a little more specific. In general,
R: Y + (15-20)
G: average of R and B
B: R – (15-20)
For example, the following values represent common Caucasian skin tones using the rules above:
* R: 80%; G: 70%; B: 60%. R is 20 points higher than B, and G is midway between R and B. That’s perfect.
* R: 86%, G: 78%; B: 70% also reflects a nicely balanced skin tone. Again, G is midway between R and B, and R is 16 points higher than B. This, too, illustrates a great relationship among the colors.

What are the URLs for webmail and the wiki?

I see that Lion Server supports webmail and a built-in wiki server, both available through a web browser.
What are the URLs for these; how do I get to them? I can't find that important detail anywhere in the documentation.

From /etc/httpd.conf
Alias -->name --> location
Alias /webmail /usr/share/web/webmail.html
Alias /changepassword /usr/share/web/changepassword.html
Alias /profilemanager /usr/share/web/profilemanager.html
Alias /webcal /usr/share/web/webcal.html

What are the tools for GAP Analysis.

What are the tools for GAP Analysis.

Hi
GAP Analysis :
A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
Actual gap analysis is time consuming and it plays vital role in blue print stage.
Please search, there are many threads and many times discussed this topic.
GAP Analysis
Re: gap analysis
Regards

So what are we getting for hanging in there?

Similar Messages

Maybe you are looking for