So, what do you think I should do?

So, I'm getting into computer graphics and 3D stuff. I have realized that the Radeon 9600 that is default in my Dual 2.3 G5 isn't the greatest for 3D design. I was @ the Apple store the other day and was trying out the different machines. I'm really impressed with the new iMacs that Apple just released. They had Final Cut Pro running with some content and it was really smooth. I was planning on eventually upgrading to a Mac Pro to replace my Dual G5 but I was wondering do you think the new iMacs are good enough for this kind of thing? I plan on using Cinema 4D from Maxon, and probably Blender.
I guess these are my options:
1. Sell my Dual G5 / 20" Cinema display and get one of the new iMacs.
2. Keep my Dual G5 and upgrade the video card.
3. Keep my Dual G5 and make do with it or use it along with my MacBook Pro until I can get a Mac Pro.
4. Sell my Dual G5 and use my MacBook Pro with my Cinema display, Keyboard, and Mighty Mouse even though the resolution on the Cinema display will only be 1600 x 1000...and put the money I get from the G5 torward a Mac Pro.
To be honest the performance I'm getting with my G5 is great with everything except for the 3D graphics. I tried the demo of Cinema 4D on my G5 and my MacBook Pro, and the MB Pro blew it away. With some of the animation demo content m G5 was running @ about 12 FPS. My MacBook Pro was running the same content @ full speed. The performance with Blender is actually pretty good on the G5. I'm not sure if it's the intel processor or if its just because the video card ***** in the G5. I don't want to go upgrading the video card if it's really because of the G5 processor. I have 1.5 GB RAM in my MB Pro and 2.5 GB in my G5. What is your advice?

Congrats on the new Mac Pro, it was hard from reading your request if money was an option or not.
I have a Guad G5 and love it, and I am running the NVidia Quadra card, and run Motion, Shake , Final Cut Pro, Color etc and it runs like melted butter.
And I guess it helps that I have it maxed on ram..
Cheers.

Similar Messages

What do you think Nokia should fix/update for futu...

What do you think Nokia should fix/update for future N96 firmware?
N96-1 + 8G SD~Software Version 30.033~Software Version Date 18-06-09~Type RM-247~P/C 0543713~T Mobile UK

What do you think Nokia should fix/update for future N96 firmware?
N96-1 + 8G SD~Software Version 30.033~Software Version Date 18-06-09~Type RM-247~P/C 0543713~T Mobile UK

After updating my iPhone 5 to iOS 7.1.1, my back camera doesn't auto focus anymore, and it takes blurry pictures. What do you think I should do?

after updating to ios 7.1.1, my camera doesn't focus anymore. pictures are blurry. what do i do? can anyone help me with this?

Hello Megeedolore,
It sounds like your rear facing camera is not functioning correctly. I would start by quitting all the open apps on the phone with the following article:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, and you have a protective case, remove the phone from the case and retest the issue.
Thank you for using Apple Support Communities.
Regards,
Sterling

What do you think I should do?

Okay, here I go...
I bought a MBP back in June 22. I returned that one because it was giving me problems, one KP (Kernel Panic) per day, the speakers sounded awful (the day I took it back they didn't even work!!) It was a week 21. Apple swapped it right there and then for a new MBP, week 22. This one has only given me one KP so far. The panic.log goes as follows:
Wed Jun 28 18:05:18 2006
panic(cpu 0 caller 0x0019CADF): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00000001, CR3: 0x00d6d000, CR4: 0x000006e0
EAX: 0x00000001, EBX: 0x01345cb0, ECX: 0x01b45990, EDX: 0x01345cb8
ESP: 0x00000001, EBP: 0x0b9b3e54, ESI: 0x01fa7fd0, EDI: 0x01fa7fd0
EFL: 0x00010202, EIP: 0x0014126a, CS: 0x00000008, DS: 0x0b9b0010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0xb9b3cb4 : 0x128b5e (0x3bc46c 0xb9b3cd8 0x131bbc 0x0)
0xb9b3cf4 : 0x19cadf (0x3c18e4 0x0 0xe 0x3c169c)
0xb9b3da4 : 0x197c7d (0xb9b3db8 0xb9b3e54 0x14126a 0x48)
0xb9b3db0 : 0x14126a (0x48 0x2050010 0x10 0xb9b0010)
0xb9b3e54 : 0x12d780 (0x1345cb0 0x1 0xb9b3e84 0x3ad3fc)
0xb9b3e84 : 0x12d7a1 (0xd 0x1 0x1 0x3af151)
0xb9b3ea4 : 0x3b619d (0xd 0x497a40 0xb9b3ed4 0x1fa6d00)
0xb9b3ec4 : 0x3b737e (0x1ce48e0 0x1fa7fd0 0xb9b3ef4 0x3b7420)
0xb9b3ef4 : 0x3ae76f (0x1fa7fd0 0x1b38e00 0x37d388 0x1fa6d00)
0xb9b3f14 : 0x38a21c (0x1b38e00 0x1fa5c20 0x1b49360 0x0)
0xb9b3f44 : 0x380f81 (0x1b4bc60 0x1b38e00 0xb9b3f78 0x3b3d69)
0xb9b3f94 : 0x382812 (0x1b38e00 0x0 0x1bdf750 0x0)
0xb9b3fd4 : 0x197b19 (0x1bdf750 0x0 0x1b45c08 0x1345cb0) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386
The KP happened while I was shutting down my MBP, weird (for me at least) I thought they only happened when you were using wireless internet and downloading large files?
Okay my question is, should I call Apple and try to get them to change the logic/motherboard or do I take it back to the Apple store and tell them basically everything I'm saying in here?
I have AppleCare for 3 yrs. and my 14 days still don't expire (I have until July 9th)
Also this heat issue is also getting on my nerves...the bottom of my new MBP gets really hot. I have to use my old art journals as a shield from the heat that emanates from the bottom.
Any suggestions from you guys will be appreciated...
Thanx in advance.
-Javier
MacBook Pro Mac OS X (10.4.7)

Long story short...I went to the Apple store, got told the same thing, and after pointing out a creek (located on just as the right speaker ends; I had to lift it up and then gently press) they told me that the "creek" wasn't normal and that I could get an exchange for a new one....still not convinced that this one is going to be better from the last two. But I still have high hopes for it...I mean, I love this machine, and sometimes you cant help but complain....its just that why so many problems with it.

What do you think of my Bash Script? What about the error checking?

Well what do you think of this Bash script
It works
I gave it some problems (i.e. unpluged the ethernet, messed up the URL's, uninstaled some programs...) to see if would report errors and stop or just keep going... But it did
I just kind of thought up a way to do some error checking with the commands that I know.....
What is a better way to do error checking?
What do you think I should add/Do to this script?
#!/bin/bash
# Shell script to make a USB Tumb Drive for Flashing BIOS on a Lenovo Ideapad Y510.
# This script needs to be owned and run as ROOT with the "sudo command"
# i.e. sudo usbbiosflasher
# If you have anyideas send me a PM on ubuntufourms.org my user name is HunterThomson
# Name/Rename this script usbbiosflasher and save it to the ~/home directory.
# Then run the command- chown root:root usbbiosflasher
# Then run the command- chmod 755 usbbiosflasher
# Then copy the script to the directory /usr/bin.
# Run this comand to do that- sudo cp ~/usbbiosflasher /usr/bin
# You also must have the program "mbr" installed
# You can install the mbr program by running this comand in the shell on Ubuntu
# sudo apt-get install mbr
# In Arch Linux you have to get it from Aur
# First you will need to know a few things...
# You will also need to know the Mount Point i.e. /media/disk and the /dev path i.e. /dev/sdb1.
# You can find these by using the df -T comand.
# Run df -T in the shell. Then plug in the USB Thumb Drive and run the df -T comand agin.
# The new listing is the USB Thumb Dirve.
# Also check to make sure the File System tipe is vFAT or FAT16 or FAT32.
# If it is not use gparted to format it to FAT32.
# I am farly certen that all USB Thumb drives come formated with FAT file system out of the BOX.
# You may want to fromat it anyway just to make sure.
echo "Interactive Shell Script to Make a USB Thumb Drive \for Flashing BIOS On a Lenovo Ideapad Y510"
echo ""
echo "You will need to have the program mbr installed"
echo "If you are on Ubuntu Linux you can retreve it form the repositories"
echo "If you are on Arch Linux you will need to get it from the Aur repository"
echo "Open anuther shell and \do that now..."
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
echo ""
# The next comand will make a directory to put needed files into. Note this file and everything init will be owned by root.
mkdir ~/usbbiosfiles && check1="yes"
if [ "$check1" = "yes" ]
then
echo "Made directory usbbiosfiles... OK"
else
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit
fi
# The next two comands will get the FreeDOS file and the .ROM file.
cd ~/usbbiosfiles && checka="yes"
if [ "$checka" = "yes" ]
then
echo "Changing to the usbbiosfiles directory... OK"
else
echo "Could not Change to the usbbiosfiles directory"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://www.fdos.org/bootdisks/autogen/FDOEM.144.gz" && check2="yes"
if [ "$check2" = "yes" ]
then
echo "Download of FreeDOS... OK"
else
echo "Could not Download FreeDOS"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://ubuntuforums.org/attachment.php?attachmentid=78460&d=1216648756" && check3="yes"
if [ "$check3" = "yes" ]
then
echo "Download of the BIOS.ROM \file... OK"
else
echo "Could not Downlad the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
# The next comand will name the .ROM file to the right name.
mv ~/usbbiosfiles/attachment.php?attachmentid=78460\&d=1216648756 ~/usbbiosfiles/06CN29WW.bios.update.tar.bz2 && check4="yes"
if [ "$check4" = "yes" ]
then
echo "Renameing of the BIOS.ROM \file... OK"
else
echo "Could not rename the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
echo ""
# The next two comands set the variables. DEVX for the path i.e. /dev/xxx and MOUNTX for the mount point i.e. /media/xxx
verify="n"
while [ "$verify" != y ]
do
echo "You will need to know the Mount Point and the dev Path. You will also need to \make sure the File System \type is vFAT, FAT16 or FAT32."
echo ""
echo "With the USB Thumb Drive unpluged, Open another shell and run the comand df -T Then plug \in the USB Thumb Drive and run the comand df -T one \more time. The new device listed is the USB Thumb Drive. Note the Mount Point and The dev Path and the File system Type i.e. vFAT... If the File System \type is not vFAT, FAT16 or FAT32 you will need to fromat it with gparted. You may want to format the USB Thumb Drive anyway just to \make sure. In any \case delete all files and directorys on the USB drive before you go any ferther with this program."
echo ""
printf "Enter the dev path the USB Thumb Drive is at?"
read DEVX
echo ""
echo "Are you sure $DEVX is the dev path of the USB Thumb Drive... y or n?"
read verify
done
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "What is the Mount Point of the USB Thumb Drive?"
read MOUNTX
echo ""
echo "Are you sure $MOUNTX is the Mount Point of the USB Drive... y or n?"
read verify
done
echo ""
install-mbr --enable A1 --partition 1 --force --timeout 0 $DEVX && check5="yes"
if [ "$check5" = "yes" ]
then
echo "Installing MBR on USB Thumb Dirve... OK"
else
echo "Could not install MBR on USB Thumb Drive"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
tar xjf ~/usbbiosfiles/*.tar.bz2 && check7="yes"
if [ "$check7" = "yes" ]
then
echo "Unpacking BIOS.ROM file... OK"
else
echo "Could not unpack BIOS.ROM file"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
gunzip ~/usbbiosfiles/FDOEM.144.gz && check8="yes"
if [ "$check8" = "yes" ]
then
echo "Unpacking FreeDOS files... OK"
else
echo "Could not unpack FreeDOS files"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mkdir ~/usbbiosfiles/fdoem144 && check9="yes"
if [ "$check9" = "yes" ]
then
echo "Made directory fdoem144 in direcoty usbbiosfiles... OK"
echo ""
echo "Going to \sleep \for 5secs"
else
echo "Could not make directory fdoem144 in usbbiosfiles directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
modprobe loop && sleep 5 && check0="yes"
if [ "$check0" = "yes" ]
then
echo "Modprobeing loop... OK"
else
echo "Could not \modprobe loop"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mount -o loop ~/usbbiosfiles/FDOEM.144 ~/usbbiosfiles/fdoem144 && check10="yes"
if [ "$check10" = "yes" ]
then
echo "Mounting FreeDOS on the fdoem144 directory... OK"
else
echo "Could not \mount FreeDOS on the fdoem144 directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/fdoem144/* $MOUNTX && check11="yes"
if [ "$check11" = "yes" ]
then
echo "Copying FreeDOS files to $MOUNTX... OK"
else
echo "Could not copy FreeDOS files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/*.ROM $MOUNTX && check12="yes"
if [ "$check12" = "yes" ]
then
echo "Copying BIOS.ROM files to $MOUNTX... OK"
else
echo "Could not copy BIOS.ROM files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
sync && check13="yes"
if [ "$check13" = "yes" ]
then
echo "Runing the syncing command... OK"
else
echo "Could not run the syncing command"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
umount ~/usbbiosfiles/fdoem144 && check14="yes"
if [ "$check14" = "yes" ]
then
echo "Unmounting of FreeDOS... OK"
else
echo "Could not unmount FreeDOS"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
fi
verify="n"
while [ "$verify" != y ]
do
printf "Do you see any errors... yes or no?"
read AN2
echo ""
printf "You answered... $AN2 to errors. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN2" == "yes" ]
then
echo "User Repoted... Error"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
else
echo "Success"
echo "I did a lot of error checking too and didnt find anything"
echo ""
echo "Go get a pen and paper to write down these instructions"
printf "Then hit the Enter to continue"
read WAIT
echo ""
echo "Now leave the USB Thumb Drive pluged into your computer and Reboot. When the Lenovo Logo POST screen appears hit F2 to enter the CMOS setup utility. Go over to BOOT tab and go down to HardDrive \(Not Boot Order) \then \select the USB Thumb Drive as the 1st hard drve. Then F10 and yes to save changes. Your compter will reboot agin. Then when the Lenovo Logo POST Screen appers on reboot hit F4 to enter the BIOS FLASHING program. The USB Thumb Drive will be seen as the C drive \in the list on the Left, Select it. Then \select the .ROM \file \in the list on the Right and start the BIOS FLASH. \(NOTE Your hart may stop beating... This is normal) Pray to any God you know of and your computer should restart just like normal. Hit F2 and the BIOS will now stay it is 06CN29WW. You will need to \set the boot order to the way you like it and other things \if you need to because they have been changed to the default."
fi
echo ""
echo "End of script"
Last edited by hunterthomson (2008-08-10 11:17:47)

Personally..... (this is just how I would have written it - if it works, then it's good enough for me though )
I would change this whole block:
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
To this much shorter code:
MBR='/usr/bin/install-mbr' # Or where ever you expect it to be
if [ ! -x $MBR ] ; then
echo "mbr doesn't appear to be installed."
echo "If it is installed, check it's location, make sure it's executable and then make sure the MBR variable in this script is correct"
exit 1
fi
I wouldn't have used the checkXX variables for each stage:
mkdir ~/usbbiosfiles
if [ $? != 0 ] ; then
#failed
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit 1
else
echo "Made directory usbbiosfiles... OK"
fi
There is an issue with the way you do your verifications - the user can never get out unless they answer 'y' or hit CTRL+C. Something like this gives them options:
verify="n"
while [ "$verify" != "y" && "$verify" != "n" ]; do
echo "You need to answer 'y'es or 'n'o"
read verify
echo $verify | tr "[:upper:]" "[:lower:]" # This converts the answer to lowercase so replies entered in upper case will still work
done
if [ $verify != 'y' ] ; then
exit 1
fi
One last thing I try to do in scripts... Declare all your binaries as variables at the start of the program, then execute the binary program by using the variable. For example:
# Binaries
TAR='/bin/tar'
CP='/bin/cp'
CHMOD='/bin/chmod'
# Execute tar and chmod the created file
$TAR cvzf /tmp/tarfile.tar.gz /etc/*.conf
$CHMOD 400 /etc/*.conf
This way, it's easy to change the path in future without having to hunt through the script if the paths change, and it also ensures you're calling the programs using the full paths to make sure you're not executing some strange variant or alias that someone has setup. If I use `chmod` 30 times in a script, and the path changes in the future or on a different system (`chmod` is a bad example cause it's highly unlikely to change, but you know what I mean), then all you need to do is update the variable at the start of the script, and it all works again without having to script-hunt and change it 30 times.

HT201210 my iphone is off when i try to turn it on its gives me a picture of usb connected to itunes ....but when i connect my phone to itunes on my computer t says to restore my phone so i tried restoring it but it wont restore.so what do you think i sho

my iphone is off when i try to turn it on its gives me a picture of usb connected to itunes ....but when i connect my phone to itunes on my computer t says to restore my phone so i tried restoring it but it wont restore.so what do you think i should do ?

I had this on my iphone 4s - took it into the apple store. They couldn't fix it either and ended up giving me a replacement phone

Lack of SD card slots what do you think

I don't know about the rest of you, but I like my stuff on an SD card. Not in a cloud. It seems Motorola, Verizon, and android all want you to put your stuff in the cloud. I'm sorry but I like my privacy and I like to access my content even when I have no signal. The cloud is for morons who don't realize their stuff can be hacked. If the Pentagon can be hacked, so can the cloud. Verizon, give us the option. Quit force feeding us stuff that a bunch of techno geeks sitting around and dream up. I have been a loyal customer for years and your trying my patience. I like my Droid Razr MAXX HD. It has served me well for 2 years in some of the worst environments. It has never failed me and I think you hit the nail on the head when you introduced it. But you took a moronic stance and quit offering it. You got it right and then screwed it up. The only complaint I had was all the bloat ware. Give us the choice. We buy the phone, it is ours, we should be the ones to decide what stays and what goes. Not some ***** sitting in marketing. If you want to introduce it, then do so but allow the people the choice of what stays and what goes. It will cost you customers in the future if you don't, including me. Have a nice day!!!!

You ask "what do you think".
I think that your message would/will be better received if you didn't resort to name calling and "colorful" language.
You/we will never win the "argument" over what you term "bloatware". Verizon enters into financial agreements with the providers of that software to be able to install it on the devices. They make a lot of money (presumably) on this, so it is not likely to end.

Best IDE & Platform Configuration? What do you think?

What do you think the best IDE is out there? I want to compile and create applications as well as servlets and beans, but my focus would be on the beans, servlets, jsp, etc, the web stuff. Once I have the IDE for that, what is the best configuration for developing under that environment. For example I would like to use the the JavaMail API as well, and that is available for the J2EE. So I can install both the J2SE and J2EE SDK's right? Should I accept their default installation directories? Is it possible to move files, the .jar files for example over the to a single directory for centralization? Help, trying to get an understaning how to create a nice development environment. Simple, efficient, etc.
Thanks so much!!
Terry

I personally think Eclipse is outstanding. I used JBuilder for a while, but it insisted on formatting code the JBuilder way. Eclipse also has refactoring, which is a major bonus. Moving classes is now a few clicks instead of performing a search-replace on all your files. There are UML and dozens of other types of plug-in.
As far as setting-up your environment, I normally duplicate a web application's deployment. So, the external JAR's I need are in WEB-INF/lib. The IDE should take care of classpath issues, if you perform the initial project set-up properly. I would also learn Jakarta's Ant. It makes deployment a lot easier, at the expense of some up-front development.
- Saish
"My karma ran over your dogma." - Anon

What did you think of iMovie '11?

I am thinking about buying a new mac but I'm only really concerned about the movie making software. I have used iMovie a few years ago and I liked it for the most part but I want some personal feedback on it. What did you think of the new software? What has changed in the last few years? Anything important that I should know?

Hi
If You last used iMovie HD6 then the change is severe - it's a compleately new tool.
If iMovie'08 or 09 the difference is not that great.
Some I listed as
*iMovie 09 (v8) 8.0.6 (jan 2009)*
• Far better than iMovie 08 but still far from good.
• Pic in pic, green screen but basic
• Image stabilization - fairly good for amateur use
• Speed-up/down and reverse
• Bl/W, Old age etc
• Still - No Continous TimeLine
• NO - Possibilities to enhanze by use of thirdpart Plug-ins (all investments lost)
• NO - Playback via Camera/FW - and this prevents 100% safteybackups and the use of an extra TV/Monitor as real-time Quality control (as in iM 1 to HD6)
Aimed at - speed editing small video projects to be presented on the Internet - NOT DVDs
*iMovie 11 (v9) 9.0.x*
• Will be - Intel Only
• Snow Leopard minimum Mac OS X.6.3
YES
• Advanced view including a true TimeLine ? Yes but rudimentary (very basic)
• True Storyboard - where You even can write and prepare space for lacking material that needs to be obtained or re-shoot. YES
• Better wave-form presentation of audio and audio tools - Rubberband - Yes
• Trailer creating tool
• ”Faces” as in iPhoto - NO - but this finds if there are people in some video-clips
• Better audio tools. Equalizer and a background audio reducer
• More Camera support eg 24fps
NO
• not 64-bit only
• The Playback to Camera via FW - returns ? NO
• Full Quality to iDVD - NO - still only half - every second line
• Plug-in facility ? - NO
• No free text tool
• Tool to mask an identity eg band over face or unsharp area. - NO (could be obtained via Plug-ins in iM HD6 and earlier)
• Animation tool - To point on interesting object/player - NO animations refere to a totally different
thing connected to Storyboard and insert of ”dummy animations” while building a movie
Yours Bengt W

Dear apple management, I have purchased I pad mini e few days ago. I need help as follows: (1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ?

Dear apple management, apple support communities
I have purchased I pad mini e few days ago. I need help as follows:
(1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ? HELP URGENTLY REQUIRED.
(2) How do i sync my pc with I pad mini?
(3)i can read on i pad mini file made in microsoft excel but all numbers are very different from the original document. What is the solutuon?
Dr Uma S Nayak
<Personal Information Edited by Host>

You are talking to fellow users on these forums, not iTunes Support or Apple - I've asked the hosts to remove your phone number from your post.
For the Camera app, try closing it via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar at the bottom of the iPad's screen, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
In terms of syncing, you will need iTunes on your computer - if you haven't already downloaded it then you can do so from here : http://www.apple.com/itunes/download/
You can conncet the iPad to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar on iTunes 11 on a PC via control-S), and use the tabs on the right-hand side of the iTunes screen to sycn your content to the iPad.
Syncing music : http://support.apple.com/kb/HT1351
Syncing apps : http://support.apple.com/kb/PH12315
If you haven't yet synced your iPad to your computer you may also find this page useful : https://discussions.apple.com/docs/DOC-3141
For the excel file, what app are you viewing/editing it in ? If the values are different then it may be that the app that you are using doesn't support all the formulas that are being used in the spreadsheet. Apps that 'support' excel documents include Apple's Numbers app, and from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD.

What to you think - as a professional webdesigner - of this website?

Hi,
Can you have a quick look at this site: http://www.azozi.be (sorry, the site in Dutch, but it concerns the look and feel of the site ...)
Does it has to much text or not?
Would you start reading this site?
What do you think about the usability and the contact form of this website?
What about the portfolio examples / images?
Thanks for your answers and tips ...
Your opinion helps!
[signature deleted by host]

dauwie,
Does it has to much text or not?
Maybe not, but there is surprisingly little to catch and lead the eye, and no logo/identity supporting contents.
Would you start reading this site?
I very well might, if my Vlaams were better.
What do you think about the usability and the contact form of this website?
The boxes should be larger, more or less filling the space allocated.
What about the portfolio examples / images?
They should be larger and clearly marked as portfolio.

What do you think of this Design for Multiple Threads

Hi Java Experts ;
I'm curious to know what you think about this design for a multhreaded app i'm working on.
I have a controller thread that (a.) creates threads and (b.) keeps a reference to threads that it creates (by sticking them in a hashtable along with the generated Id for that thread).
When a created thread completes its job, it decrements the thread counter and removes its reference from the hashtable before it finishes its run method.
Now here's the interesting part in my controller thread i'm creating new threads on the fly with this infinite loop
     public void run(){
          while(true){
               try{
                    Thread.sleep(500);
               }catch(InterruptedException e){
               if(threadCounter<maxThreadCount && moreJobsToDo.size()>0){
                    createDomainThread();
          }//end while
what do you think about this pattern ? My goal is to maintain about 200+ created threads running at all times with this pattern.

jeff kesslerman's book says about threads
"5.2.3 Threads
The impact that threads have on RAM footprint isn't a problem for most programs, but running threads do need space to store their stack state, and the system- specific data structures do consume memory.
Because runtime implementations vary widely in how threads are handled, you might encounter situations where the impact threads have on footprint is significant. For example, some ports of the JRE create a heavyweight OS process for each running thread. In an application that uses many threads, this means that thread costs, rather than class or object costs, can become the dominant factor in the program's memory consumption.
You shouldn't avoid using threads-they're necessary in many cases, and generally don't have a large impact on footprint. However, you should be aware that the impact can be very different across runtimes. This is one of the reasons it's a good idea to measure performance characteristics under your program's different target environments. "
Question #1: how does garbage collection go about clearing the stack state, and the system- specific data structures that consume memory.
Question #2: in my situation, each worker thread's activity is not as brief as a simple server request. Each thread does a lot work and does a lot of network connections. on average I would say 100 http request - each of which can be easily blocked or delayed significantly. Therefore each worker thread may operate for between 2 - 10 minutes.
Do you think thread pooling is useful in this situation ?
stev

What do you think of the new creative cloud cc that was just released?

What do you think of the new creative cloud cc that was just released? I'm using it now and I think it's great. It's cs6 on stereroids lol More new features that people who fully paid for cs6 should of had.
I do wish the cloud standard price changes to 29.99 a month for all users so everyone gets a chance to enjoy the cloud.

I just downloaded CC, and still have all my CS6 apps as backup. Bridge CC (64-bit) is showing the same unacceptable performance I had with CS6 version. Can't believe that Adobe is so inept. I did fix the CS6 version but I forget how I did it. CS6 version of Bridge is near instantaneous. And it's not a matter of building the cache. It takes the program forever just to respond to a simple mouse click in the menu bar.
Photoshop CC crashed my machine, whereas CS6 version runs perfectly. Afraid to download any further apps.
Adobe 11 failed to install because it think's prior version of the that program is still on the computer. I never installed Acrobat 11 on this machine. Just Acrobat 10, which also got the stupid 30-day "refuse to start" bug, so I'm using Acrobat 9.5 which works flawlessly. Funny how the newer the code from Adobe, the worse it gets for its customers.
I'm using Win 7 Pro, 16GB mem, Nvidia 2800M video card on Thinkpad with i7-920XM chip.

What do you think of the new creative cloud cc?

What do you think of the new creative cloud cc that was just released? I'm using it now and I think it's great. It's cs6 on stereroids lol More new features that people who fully paid for cs6 should of had.
I do wish the cloud standard price changes to 29.99 a month for all users so everyone gets a chance to enjoy the cloud.

This forum is only to discuss how the forums operate, not products
If you go to the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the Adobe product you use
Cloud Forum http://forums.adobe.com/community/creative_cloud

Enermax PSU. What do you think?

Enermax EG365P-VE FC 350W.
What do you think about the enermax PSU listed above. Should it power my setup below in my signature? Or perhaps should I purchase a more powerful one? Suggest a model if you would.
Thanks
Ean

Thanks Steve...
Got the PSU and it works great.
I'm lovin it!!!

So, what do you think I should do?

Similar Messages

Maybe you are looking for