So what is better - time efficient - Google Sketch or Strata 3d SE for ibooks author use?

Yes, but I doubt if my definition of ease-of-use is the same as yours.
As always with these types of questions, the best method is to work with both, on your machine, using your environment, your content, your specs, your resources, with your time and then decide.

Similar Messages

Using Google GWT to create (Dashcode) widgets for iBook Author I would like to embed interactive widgets in iBooks using iBookAuthor. The widgets in question started life in Java but GWT has allowed them to be converted to javascript and to run on web pa

I would like to embed interactive widgets in iBooks using iBookAuthor. The widgets in question started life in Java but GWT has allowed them to be converted to javascript and to run on web pages (for example, http://softoption.us/content/node/437 scroll to the bottom). In theory, iBookAuthor can bring in most html5, and much javascript. The technique is to wrap the html in a folder, with 2 extra files, a plist and a default png and then change the extension of the folder to ‘.wdgt’. This is the technique for making Dashboard widgets for the Mac, and Apple even have the Dashcode software to do it. So what you really do is to make a Dashboard widget, then iBookAuthor can import it. So far, so good. And some folk have been doing this, for example http://www.prweb.com/releases/2012/2/prweb9242432.htm http://www.panophoto.org/forums/viewtopic.php?f=64&t=10417&p=158330#p158423 However, if you start with GWT and create a single page with one button and a Hello World, compile it, and get the WAR file (I use Eclipse here)… the Safari browser and others will run it properly (even on an iPad). Then if you wrap it, a proper Dashboard widget is created, which runs properly on a Mac. Then if you go to iBookAuthor and put a custom widget in the Text, then drag it in. It is accepted by the text and shown as being there. However, if you use Preview to look at it on an iPad, it is gone (or was never there in the first place). Anyone any ideas on this? [And iBook Author seems to give no warnings.] The widget is at https://dl.dropbox.com/u/46713473/Test6.wdgt.zip I have bells and whistles that I’d like to get into an iBook!
Thanks for any insights.
Martin

I do have a little to add, which might help someone. Indeed, opening a blank page and dragging the widget straight in seems good in difficult cases. But, actually, I was also able to insert successfully from the Toolbar especially to blank pages. So, it may have been something to do with the columns and stuff like that. Anyway back then the insertion would show in iBooks Author but not in the Preview on the iPad. I moved on to actual Google Web Toolkit output javascript. Basically I had three at hand to try: a Hello World with a button which went straight it, one of moderate complexity, (for example with a built in Lisp interpreter), which also went straight in, and finally a more complex one that initially was rejected by iBook Author. Author complained that there was an unsupported media file (of course, Author does not tell you which one it is, that would be too easy). [Remember, this was a proper working Dashboard widget which could be installed on a Mac]. Among other things I had read remarks about .gif files. When looking through the GWT war directory at the actual javascript etc files, I noticed there were two gifs there one called ‘clear.cache.gif ‘ and a second one called ‘0F89659FF3F324AE4116F700257E32BD.cache.gif’. (Now, there is obfuscation so the numbers here may be different from case to case.) The clear.cache.gif did not seem to be anything special. But the other one is an animation. It is three little boxes that twinkle (rather like a waiting spinning cursor). So, I opened that file and saved it to itself (that picks the top frame of the animation and saves only that, leaving you with an unanimated gif). The resulting widget drags and drops into iBooks Author (and seems to work properly at a quick glance). So, if you are having trouble with ‘unsupported media files’ converting animated gifs into unanimated gifs might help in some cases.

What is best movie format for iBooks Author

What is the best movie format for iBooks Author?

Thanks for the people who helped my. Thanks to you I now have the answer. It is as follows:
1. Load your movie into Quick Time Player.
2. When in Quick Time Player go to File then Export to then check Broadband H.264, 5Mbp/s maximum data rate.
This worked for me so many thanks.

How can I download itunes when I get the following errors...have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up..ituneshelper did not install correctly error 7

How can I download itunes when I get the following errors ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
Any help greatly appreciated.
billymac

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

What is the support email for iBooks Author?

I would like to send an email to Apple and ask questions about iBooks Author. What email address should I send?

I Apublished a book with iBook Author (IBA) and was directed to register through iTunes Connect. IBA had issues with my IRS information requiring a correction be made to the application. iTunes Connect will not allow me to make any correction and displays the following:
The following error(s) occurred:
The iTunes Store account entered has already applied to distribute content on the iBookstore. To continue with this application, you must enter a different iTunes account.
I was further advised to send a copy of my IRS info but the email address provided to do this is undeliverable.
Aren't you glad you asked?
Jack

What are the video/movie formats that iBooks Author uses?

What are the video/movie formats that iBooks Author uses?

strange... when I click on it it goes to the correct page:
http://support.apple.com/kb/HT5065
http://support.apple.com/kb/HT5065

What if i have a unlocked i phone 4s it is for me to used it in the philippines

what if i have a unlocked i phone 4s it is possible for me to used it in the philippines?

If the carrier that it was locked to unlocked it for you, or you bought it factory unlocked from Apple, you can use it on Globe or SMART in the Phillipines.

What is the suggested size of images for ibooks author?

I want to make sure my iBook is no larger than 2 GB. Can I put a large graphic on each page?

Images can’t be larger than 25 megapixels (5000 x 5000 pixels) or 50 MB
See more at this support page: http://help.apple.com/ibooksauthor/mac/#/blsdd45d4d8

What is autocorrelation time with respect to Data Acquisation System

what is autocorrelation time with respect to Data Acquisation System. thew hardware i am using is PCi -6034E CARD AND SCXI_1102 and TC-2095 terminal block

Suresh;
Unfortunately,NI doesn't spec that.
For a complete list of specs for that particular DAQ board and SCXI module, refer to their Users Manual.
Regards
Filipe A.
Applications Engineer
National Instruments

Back up options? Time Machine or Carbon Copy Cloner? What's Better?

Hey guys,
I'm considering performing a clean install of OS X Mavericks on my macbook pro mid 2010. I've been having a lot of lag issues with opening/switching programs and slow browser performance (Safari, Google Chrome, Firefox). I'm currently using Time Machine to back up my macbook pro, but I recently heard of Carbon Copy Cloner as a back up option from the Apple community forums. What do you guys think is a better option? When I do a clean install of Mavericks, which backup option will give me the safest and quickest file transfer?

TM is a system backup, not an archive or best idealized "all data backup"
Carbon Copy and Super Duper are for making system clones for quick recovery of your internal HD
NIETHER are close to "best" or idealized data-only backups or archives, theyre both system emergency backups / restores.
External NAS or HD data collections are for your expanding data archives and backups.
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Data Storage Platforms; their Drawbacks & Advantages
#1. Time Machine / Time Capsule
Drawbacks:
1. Time Machine is not bootable, if your internal drive fails, you cannot access files or boot from TM directly from the dead computer.
2. Time machine is controlled by complex software, and while you can delve into the TM backup database for specific file(s) extraction, this is not ideal or desirable.
3. Time machine can and does have the potential for many error codes in which data corruption can occur and your important backup files may not be saved correctly, at all, or even damaged. This extra link of failure in placing software between your data and its recovery is a point of risk and failure. A HD clone is not subject to these errors.
4. Time machine mirrors your internal HD, in which cases of data corruption, this corruption can immediately spread to the backup as the two are linked. TM is perpetually connected (or often) to your computer, and corruption spread to corruption, without isolation, which TM lacks (usually), migrating errors or corruption is either automatic or extremely easy to unwittingly do.
5. Time Machine does not keep endless copies of changed or deleted data, and you are often not notified when it deletes them; likewise you may accidently delete files off your computer and this accident is mirrored on TM.
6. Restoring from TM is quite time intensive.
7. TM is a backup and not a data archive, and therefore by definition a low-level security of vital/important data.
8. TM working premise is a “black box” backup of OS, APPS, settings, and vital data that nearly 100% of users never verify until an emergency hits or their computers internal SSD or HD that is corrupt or dead and this is an extremely bad working premise on vital data.
9. Given that data created and stored is growing exponentially, the fact that TM operates as a “store-it-all” backup nexus makes TM inherently incapable to easily backup massive amounts of data, nor is doing so a good idea.
10. TM working premise is a backup of a users system and active working data, and NOT massive amounts of static data, yet most users never take this into consideration, making TM a high-risk locus of data “bloat”.
11. In the case of Time Capsule, wifi data storage is a less than ideal premise given possible wireless data corruption.
12. TM like all HD-based data is subject to ferromagnetic and mechanical failure.
13. *Level-1 security of your vital data.
Advantages:
1. TM is very easy to use either in automatic mode or in 1-click backups.
2. TM is a perfect novice level simplex backup single-layer security save against internal HD failure or corruption.
3. TM can easily provide a seamless no-gap policy of active data that is often not easily capable in HD clones or HD archives (only if the user is lazy is making data saves).
#2. HD archives
Drawbacks:
1. Like all HD-based data is subject to ferromagnetic and mechanical failure.
2. Unless the user ritually copies working active data to HD external archives, then there is a time-gap of potential missing data; as such users must be proactive in archiving data that is being worked on or recently saved or created.
Advantages:
1. Fills the gap left in a week or 2-week-old HD clone, as an example.
2. Simplex no-software data storage that is isolated and autonomous from the computer (in most cases).
3. HD archives are the best idealized storage source for storing huge and multi-terabytes of data.
4. Best-idealized 1st platform redundancy for data protection.
5. *Perfect primary tier and level-2 security of your vital data.
#3. HD clones (see below for full advantages / drawbacks)
Drawbacks:
1. HD clones can be incrementally updated to hourly or daily, however this is time consuming and HD clones are, often, a week or more old, in which case data between today and the most fresh HD clone can and would be lost (however this gap is filled by use of HD archives listed above or by a TM backup).
2. Like all HD-based data is subject to ferromagnetic and mechanical failure.
Advantages:
1. HD clones are the best, quickest way to get back to 100% full operation in mere seconds.
2. Once a HD clone is created, the creation software (Carbon Copy Cloner or SuperDuper) is no longer needed whatsoever, and unlike TM, which requires complex software for its operational transference of data, a HD clone is its own bootable entity.
3. HD clones are unconnected and isolated from recent corruption.
4. HD clones allow a “portable copy” of your computer that you can likewise connect to another same Mac and have all your APPS and data at hand, which is extremely useful.
5. Rather than, as many users do, thinking of a HD clone as a “complimentary backup” to the use of TM, a HD clone is superior to TM both in ease of returning to 100% quickly, and its autonomous nature; while each has its place, TM can and does fill the gap in, say, a 2 week old clone. As an analogy, the HD clone itself is the brick wall of protection, whereas TM can be thought of as the mortar, which will fill any cracks in data on a week, 2-week, or 1-month old HD clone.
6. Best-idealized 2nd platform redundancy for data protection, and 1st level for system restore of your computers internal HD. (Time machine being 2nd level for system restore of the computer’s internal HD).
7. *Level-2 security of your vital data.
HD cloning software options:
1. SuperDuper HD cloning software APP (free)
2. Carbon Copy Cloner APP (will copy the recovery partition as well)
3. Disk utility HD bootable clone.
#4. Online archives
Drawbacks:
1. Subject to server failure or due to non-payment of your hosting account, it can be suspended.
2. Subject, due to lack of security on your part, to being attacked and hacked/erased.
Advantages:
1. In case of house fire, etc. your data is safe.
2. In travels, and propagating files to friends and likewise, a mere link by email is all that is needed and no large media needs to be sent across the net.
3. Online archives are the perfect and best-idealized 3rd platform redundancy for data protection.
4. Supremely useful in data isolation from backups and local archives in being online and offsite for long-distance security in isolation.
5. *Level-1.5 security of your vital data.
#5. DVD professional archival media
Drawbacks:
1. DVD single-layer disks are limited to 4.7Gigabytes of data.
2. DVD media are, given rough handling, prone to scratches and light-degradation if not stored correctly.
Advantages:
1. Archival DVD professional blank media is rated for in excess of 100+ years.
2. DVD is not subject to mechanical breakdown.
3. DVD archival media is not subject to ferromagnetic degradation.
4. DVD archival media correctly sleeved and stored is currently a supreme storage method of archiving vital data.
5. DVD media is once written and therefore free of data corruption if the write is correct.
6. DVD media is the perfect ideal for “freezing” and isolating old copies of data for reference in case newer generations of data become corrupted and an older copy is needed to revert to.
7. Best-idealized 4th platform redundancy for data protection.
8. *Level-3 (highest) security of your vital data.
[*Level-4 data security under development as once-written metallic plates and synthetic sapphire and likewise ultra-long-term data storage]
#6. Cloud based storage
Drawbacks:
1. Cloud storage can only be quasi-possessed.
2. No genuine true security and privacy of data.
3. Should never be considered for vital data storage or especially long-term.
4. *Level-0 security of your vital data.
Advantages:
1. Quick, easy and cheap storage location for simplex files for transfer to keep on hand and yet off the computer.
2. Easy source for small-file data sharing.
#7. Network attached storage (NAS) and JBOD storage
Drawbacks:
1. Subject to RAID failure and mass data corruption.
2. Expensive to set up initially.
3. Can be slower than USB, especially over WiFi.
4. Mechanically identical to USB HD backup in failure potential, higher failure however due to RAID and proprietary NAS enclosure failure.
Advantages:
1. Multiple computer access.
2. Always on and available.
3. Often has extensive media and application server functionality.
4. Massive capacity (also its drawback) with multi-bay NAS, perfect for full system backups on a larger scale.
5. *Level-2 security of your vital data.
JBOD (just a bunch of disks / drives) storage
Identical to NAS in form factor except drives are not networked or in any RAID array, rather best thought of as a single USB feed to multiple independent drives in a single powered large enclosure. Generally meaning a non-RAID architecture.
Drawbacks:
1. Subject to HD failure but not RAID failure and mass data corruption.
Advantages:
1. Simplex multi-drive independent setup for mass data storage.
2. Very inexpensive dual purpose HD storage / access point.
3. *Level-2 security of your vital data.

IPhone 4S Battery Life: Best solutions and procedures for 1st time user: 1-Do you have a battery life issue (learn first what the usage time spec is about) 2-What can you try to remedy the situation without reading 500 pages of posts

What follows is a grouping of some of the most fruitful procedures - from what I've seen in the biggest battery life issue thread - and some background information and discussion for solving or improving the battery life with the iPhone 4S and may be applicable also to devices on which iOS 5.0/5.0.1 has been applied. Credit goes to the respective users who contributed this information to the forum and they should be commended for doing so. This is not a final listing. The goal here is to provide a first stop sort of knowledge base document for newcomers instead of having them perusing the never ending threads where the wheel is reinvented on every page...
Please don't post your questions, usage screenshots, or claims that it worked or not for you or anything here except PROCEDURES/DEBUG STEPS/SOLUTIONS or improvements to the procedures already listed here. Try to use point form and to be as concise and clear as possible. Hope all this helps.
Thank you and good luck!
General info and specs
First, take a look Apple's battery tips, info and specs(obligatory reading for all Iphone 4S users - read it once and for all):
http://www.apple.com/batteries/iphone.html
http://www.apple.com/batteries/
... you didn't read it? loll Always remember this i.e. the definition of "usage":
Usage: Amount of time iPhone has been awake and in use since the last full charge. The phone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
I'm still not convinced you read the links so here's what Apple has to say in terms of fine tuning your battery life:
Optimize your settings
Depending on how they are configured, a few features may decrease your iPhone battery life. For example, the frequency with which you retrieve email and the number of email accounts you auto-check can both affect battery life. The tips below apply to an iPhone running iOS 5.0 or later and may help extend your battery life.
Minimize use of location services: Applications that actively use location services such as Maps may reduce battery life. To disable location services, go to Settings > General > Location Services or use location services only when needed.
Turn off push notifications: Some applications from the App Store use the Apple Push Notification service to alert you of new data. Applications that extensively rely on push notifications (such as instant messaging applications) may impact battery life. To disable push notifications, go to Settings > Notifications and set Notifications to Off. Note that this does not prevent new data from being received when the application is opened. Also, the Notifications setting will not be visible if you do not have any applications installed that support push notifications.
Fetch new data less frequently: Applications such as Mail can be set to fetch data wirelessly at specific intervals. The more frequently email or other data is fetched, the quicker your battery may drain. To fetch new data manually, from the Home screen choose Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually. To increase the fetch interval, go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Hourly. Note that this is a global setting and applies to all applications that do not support push services.
Turn off push mail: If you have a push mail account such as Yahoo! or Microsoft Exchange, turn off push when you don’t need it. Go to Settings > Mail, Contacts, Calendars > Fetch New Data and set Push to Off. Messages sent to your push email accounts will now be received on your phone based on the global Fetch setting rather than as they arrive.
Auto-check fewer email accounts: You can save power by checking fewer email accounts. This can be accomplished by turning off an email account or by deleting it. To turn off an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and set Account to Off. To remove an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and tap Delete Account.
Turn off Wi-Fi: If you rarely use Wi-Fi, you can turn it off to save power. Go to Settings > Wi-Fi and set Wi-Fi to Off. Note that if you frequently use your iPhone to browse the web, battery life may be improved by using Wi-Fi instead of cellular data networks.
Turn off Bluetooth: If you rarely use a Bluetooth headset or car kit, you can turn off Bluetooth to save power. Go to Settings > General > Bluetooth and set Bluetooth to Off.
Use Airplane Mode in low- or no-coverage areas: Because your iPhone always tries to maintain a connection with the cellular network, it may use more power in low- or no-coverage areas. Turning on Airplane Mode can increase battery life in these situations; however, you will be unable to make or receive calls. To turn on Airplane Mode, go to Settings and set Airplane Mode to On.
Adjust brightness: Dimming the screen is another way to extend battery life. Go to Settings > Brightness and drag the slider to the left to lower the default screen brightness. In addition, turning on Auto-Brightness allows the screen to adjust its brightness based on current lighting conditions. Go to Settings > Brightness and set Auto-Brightness to On.
Turn off EQ: Applying an equalizer setting to song playback on your iPhone can decrease battery life. To turn EQ off, go to Settings > iPod > EQ and tap Off. Note that if you’ve added EQ to songs directly in iTunes, you’ll need to set EQ on iPhone to Flat in order to have the same effect as Off because iPhone keeps your iTunes settings intact. Go to Settings > iPod > EQ and tap Flat.
Usage specs for the 4S - http://www.apple.com/iphone/specs.html:
Talk time: Up to 8 hours (12.5% per hour drain) on 3G, up to 14 hours (7.1% per hour drain) on 2G (GSM)
Standby time: Up to 200 hours (0.5% per hour drain)
Internet use: Up to 6 hours on 3G (16.6% per hour drain), up to 9 hours (11.1% per hour drain) on Wi-Fi
Video playback: Up to 10 hours (10% per hour drain)
Audio playback: Up to 40 hours (2.5% per hour drain)
So a scenario of normal usage could be for example: 4 heavy hours of 3G internet browsing (66.4%), with one hour of call on 3G (12.5%) and 22 hours of standby (11%) = 100%
A battery life issue is a problem where the drain is really out of spec either during usage or standby or both. For example, multi-% per minute drain during usage or a 10% drain per hour during standby is problematic. Browsing the internet on 3G during one hour and losing 16-17% is not.
Apple's test methodology for claiming the specs:
http://www.apple.com/iphone/battery.html
Procedures
davidch tips (reset+full discharge recharge):
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (tilll it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
In my experience this improves the Standby battery drain issue significantly in most cases. It reduces drain from 2-4% or more per hr to 0.5% or less. It has worked for many, many users now. If it does not work after a few try's you may have a real battery or hardware issue and should contact Apple. Good Luck!
ram130's variant of davidch i.e. additional steps:
Now using davidch original steps and attaching the tweaks I made to get me more usage. As shown on page 29.
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (till it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
6. Disable Siri 'Raise To Speak' and REBOOT *( if possible use another camera to verify the                 infrared is off after the reboot).
7. Set emails, icloud and calendars to fetch. ** test. Mines on hourly.
8. If your in a no signal and your phone is saying "Searching..." even after 10mins, reboot while in that area and after 1-2min it should say "No Service". This mainly applies to Verizon customers and improve battery life in these areas.
9. *optional* Goto Settings > General > Network and you will see "Hotspot.." loading something, wait a few seconds and it should say "setup personal hotspot" then exit out.
* I notice a great improvement after disabling this and rebooting. This increased my "screen on" usage or at least helped it. Make the change.
** I have not tested push yet to narrow down the drain but I had this change on my phone. I believe exchange push is responsible for some stand by drain. As for icloud, haven't notice much of a difference. Just try it for a day. My email still came in fast most times. Again still testing, will report back on these..
buxbuster tips(wifi sync, iCloud):
These are my own tested workarounds that worked for my iPhone 4S and seemed to have worked for others as well :
Workaround number 1. Deselect wifi-sync in iTunes and press sync.
If that doesn't work try :
Workaround number 2 : Remove iCloud, reset network settings. ( I guess this won't work for you since you don't have it enabled ).
If both workarounds fail, you can always try to completely wipe your phone. That also solved some of the cases out there.
rolandomerida tips - i.e. buxbuster and additional steps:
Finally, I solved the syncing error loop. My contacts are syncing flawessly again between my devices and iCloud, and yes, the battery stopped draining, which is the main topic here.
I followed instructions from buxbuster (check his workaround a few pages up!) and an additional BIG step to restore contacts and syncing, as seen in a MacRumors forum.
This is what I did:
1. Make a backup of your Address Book, using the vCard option (or both, it doesn't hurt). Save it for later.
2. In your iPhone, delete iCloud account. When it asks, accept both: delete AND delete from my iPhone.
3. Reset network settings. The iPhone will restart, then will ask you to unlock the SIM card.
4.Turn Wi-Fi on.
5. Add the iCloud account again.
That's for Buxbuster's workaround. For some, it might work just like that. My iPhone repopulated from iCloud after step 5, but I still had that "server error" on iCloud. I had to do some extra steps, since my Mac was not syncing to iCloud and couldn't edit anything on my Mac or iCloud. Syncing back had to be fixed, too. If not, the syncing loop would continue from my iPhone, and the battery would drain awfully again.
1. In System Preferences -> iCloud, I turned Contacts off. I chose "keep on My Mac" those contacts, but I got an empty Address Book after a while. And a few minutes later, iCloud contacts were empty and my iPhone also. It is scary at first! Now, before importing that vCard backup...
2. Turn Wi-Fi off. This is important, since your contact-empty iCloud will attempt to wipe your Address Book from your Mac in seconds after importing.
3. Import your vCard backup to Address Book. Just drag it to your blank Address Book window; it asks if you want to import "x" number of cards. Of course, say yes.
4. Turn Wi-Fi on, and then iCloud contacts on again (System Preferences -> iCloud). It will offer to merge your newly populated Address Book with iCloud (which is empty at this point). It should upload every single contact to iCloud, and then to your iDevices. If not, a fifth step would be to import the vCard file to iCloud, but it shouldn't be necessary.
So, with iCloud syncing working correctly, there is no battery draining! Again, that was my particular issue.
I can't tell if this is the single answer to the widely spread battery draining problem, but it sure can be fixed with these workarounds, and yes, Apple should address the problem with a future update, for we affected customers don't need workarounds in the first place
This is the MacRumors discussion:
http://forums.macrumors.com/showthread.php?t=1256807
And dont' forget to check buxbuster's fix, video, and THANK him!
Miless tips (full 800mb release of 5.0.1 and sanitizing a restore):
As for 4S battery life. Try doing this,
1. Settings>Location Service ... disable all location services you do not need. In particularly Facebook because it drains the battery a lot.
Scroll down to the bottom at Settings>Location services>System Services ... Disable Setting Time zone, location based iAds, Diagnostic & Usage.
2. Settings>Notification>Calendar ... turn off the Notification Centre.
3. Settings>General>Reset ... do Reset All Settings. Doing this will not wipe out your iPhone. It will just Reset the network settings, location warning, keyboard dictionary, etc... but it will clear up some corrupted data there. Generally this will help.
Try these 3 steps first... if it still drains a lot, try the following,
4. Drain your battery down to 1%. Then charge it up using USB from PC ... not the charger. The charger output 1.0 A ( x 5V from USB ... you get 5W power). From PC, output is only 0.5A x 5V = 2.5W power. Charging is slower but trickle charge 4S helps the battery retain its charge better. I think it takes about 3-3.5 hours to charge full from USB/PC compared to slightly below 2 hours using iPhone charger.
If after doing the above still could not solve your battery issues (mine with iOS 5.0 was ok up to step 4, but not iOS 5.0.1).... plug you iPhone to a charger (any charger), from iPhone, access your iCloud ... set it up if you havent. Back up your iPhone data to iCloud. if you do not have enough storage (only 5GB is free), go to details and select the apps you need its data backup, choose only those you really need and leave those unnecessary ones out. Back up your camera roll to your PC/Mac manually as it could be too big to backup to iCloud.... once you have it setup, make sure you are on Wifi ... tap backup to iCloud from your iPhone. It will take a while if the file is huge.
Once backup to iCloud is completed, plug your iPhone to PC/Mac and launch iTunes 10.5.1 (make sure you have 10.5.1)
Click Restore. It will automatically initiate a download of iOS 5.0.1 ipsw for iPhone 4S. Wait for the whole process to finish, ie. download, restore software/firmware.
Once its done, do not set up your iPhone from iTunes. Set it up on your iPhone. Go through the selection. When prompted, select restore from iCloud (from your iphone backup earlier). Keep your iphone plugged into iTunes while restoring backup from iCloud. Because while restoring from iClouds, some data will be synced from iTunes if you plug in, e.g. music, video, etc... unless you bought these content from iTunes store. Apps will be downloaded from App Store from the cloud.
Once it's all done restored. Turn off your iPhone,.. and turn it on again.
Now, hopefully your battery wont be draining so fast anymore. Usually it wont after this. But you need to charge your battery at least 4-5 cycles to stabilize the charge on the battery. I dont know why... but battery life seems to get better and better for me after a few charge cycles after all the above work.
Good luck. Let us know if it works for you.
W. Raider tips (Sirii):
Bottom line for me of things that helped battery life are:
1. Turing off Siri and Rebooting the phone by holding the Home button and Top button down, ignoring the slider, until the phone shut down. (turn off Siri, reboot, and check top front of iPhone 4S against a lesser camera like the front-facing camera on an iPad2 - making sure the IR sensor is off)
2. Fully draining the battery, meaning using the phone until it shuts itself off from a drained battery and then recharging it to 100% about 4, maybe 5 times. I charged it both with a Mac and a wall charger.
Hope this is helpful!
Comments
jmm514 remarks (Twitter):
I may have found something. I had Twitter disabled in my notifications, but got a tweet today that popped up on my home screen. Didn't know I had this enabled. At the bottom of the Twitter notification settings is the home scrren toggle. Since disabling this, battery life seems better. Considering there is no setting for frequency of checking for tweets, it appears the phone is continually connecting to wifi to check for new tweets.
tmksnyder comments (notifications, corrupt data in iCloud):
For me, I found my iphone on wifi mysteriously connecting to my mac. I eventually narrowed it down to the Apple Move Trailers app which keeps a file in iCloud. The phone was trying to sync the file with the mac in the background even when the Movie Trailers app was closed (hitting the red x). Based on my macosx logs the iCloud process that was trying to sync was working directly between the phone and the mac without using itunes by connecting to an https address hosted on the phone. It was connecting every 3 minutes and failing (while phone was awake or awake during during a notification). I also found that iCloud control panel on OSX would error if I tried to delete the file. I fixed it by removing the App and doing a hard reset which stopped the sync. I probably could have turned off iCloud document sync in the phone but didn't think of that. My battery life has greatly improved while at home on wifi.    I am now at 28 hrs standby, 2 hrs 20 minutes of usage, and 68% battery. It was ok before where I could get 20-30 hrs standby and 6 -8 hrs usage. My usage today was phone calls, 3g surfing, and music via bluetooth in the car.
I also found even with Itunes iMatch, if I mass updated tages, art work etc, it would hit the phone on wifi even in standby. I was amazed.   Granted if I am not doing updates, Match won't hot the phone so this was a once in awhile event. I could drop my percentage by 5-10% in a matter of minutes when doing updates.   I think a lot of our problems are background processes, associated with iCloud, notification, and apps. More features means more battery.   I think the key thing is to keep track of what has recently been added or changed if battery life gets worse all of a sudden.   It may be an app that was recently installed and if possible you may want to completely remove it and not just quit it.
With twitter, i think it uses push notifications so it doesn't need to be running and actively poll on the phone. For instance , if i quit the mail app, i still will get mail notifications and can swipe the message and load mail. Apple Push Notifications servics maintain the connection to the phone and there are likely pings or connection checks that occur for the service on an os level not an app level. This minimizes the load so there arent a bunch of apps all runing and constantly checking. The notification service , if it is contacted from twitter or another service with data, will check the settings you have registered to the with the apple push service and send the notification to your phone. No matter what, there is a drain with notifications. M hunch is once one application is configured to receive notifications, connection checking occurs betwen the push service and the phone so it knows where it is on the network. If it is implemented correctly, these checks arent frequent if you are still and more frequent as you move. The other drain is for when the noification hits and is processsed. If i get 9 emails over night, my screen just popped up for 20 seconds or so to process each message using battery. I would even think that just go from low power to turning n the screen uses more juice than if the device was already on and i get the message. On nights I get no notifications, I see a 3 or 4 percent drop. On nights with a number of notifications, i have seen up to a 10 percent drop. Besides notifications, wifi sync and icloud will poll on the local network and use up battery if the host computer is on and running itunes or trying to sync a data file that is corrupt (which i had with the apple movie trailers app causing my phone to drain). For me turning off wifi sync and remving a corrupt file in icloud solved my battery issues and I get over 24 hrs of standby with 6 to 9 hrs of use and this is with all the normal location services and push serivices turned on.
See http://developer.apple.com/library/mac/ipad/#documentation/NetworkingInternet/Co nceptual/RemoteNotificationsPG/ApplePushService/ApplePushService.html for more info. I think it has a good overview of how the notifications work.

Well seems like that rumor of iOS 5.0.1 is finally gone the way of the dogs since developers got a beta of 5.1. So as stated earlier in the master discussion-> I suspect if you are filling up this thread with false post or creating a master set of links to various post that are unreliable you are wasting your time. Press is not going to touch the story due to poor or inaccurate sources which may be links from the master thread. This can include inaccurate information, combination of conflicting post or postings from users which may not own the device. Reputable press organizations have policies that require discloser and strict rules about what is a reliable source for a story. It is clear that many of the post in the master thread, which are links presented here are questionable.
Sorry to say that postings taken without any analysis of their totality have been propagated via various sites, for example sites such as http://www.2012federalbudget(dot)com. (Do not visit but I suspect that this is not the 2012 federal-budget site you would expect based on analysis of the records. There are plenty of sites like http://www.2012federalbudget(dot)com propagating questionable post in these threads.) One site for example in the discussion thread used a self signed certificate, the site had a log in to allow users to enter their OpenID. Seems many of these sites are pop and drop drupel configurations.
So remember this is how the really bad rumor of iOS 5.0.2 got started, the 5.1 memory leak issue, iCloud Issues, call quality, address book, etc.
Some of the postings have been very comical, I think the latest now is a dropbox issue. Seems that the length of the previous thread has resulted in various app engines of some proxy servers/tools reaching their limits.
So I would make sure to know the source of any information you link to. Make sure you avoid entering any information to outside links such as OpenID or Apple ID, these are big prize items for anyone with malicious intent. If you have issues and are a valid user contact APPLE CARE. (Note link is using McAfee Secure Short URL Service, and is https.)
http://mcaf.ee/ricdt
The original solution still represents a high level of success for users having any battery issues.
Install 5.0.1 on your iPhone 4s. Some users posting they are still using older versions, bad fake serial numbers, etc.
Make sure your device can run iOS 5.0.1 and is not altered.
Make sure you use a new Sim, not some cut down version which many users admit to doing. (Again, worth confirming what people are posting.)
Reset the device doing a hard reset and software reset.
Let battery drain and then charge for the full cycle, which is 24 hours.
I think you will find you will get the battery usage that APPLE has stated for the device.
Best of luck, stay safe and thanks

What is better: Builder 2 oder Plug In

Hi guys!
As i couldn't find much about that, here is my question.
Maybe it is interesting enough for some experts to have smal
discussion.
What is better to use: builder or th plug-in.?
I don''t really need the to have a design view, so pure code
would be enough for me. And what I hate about the builder is the
performance when compiling large projects. Is this better if you
use Eclipse (which version) together with the plugin. Can you have
both installed and use the same project workplace to "share" the
projects, depending on what you want to do?
What gives me the best performance for writing, compiling,
debugging?
THX

See iPhone. See iPhone charged to 100%. See user using iPhone. User opens an app and uses it. When done user goes into recently used list and "closes" app. User does this each time when using an app. User gets 145 texts. 71 hours later iPhone only has 8% battery charge. See the battery in red. User charges it.
See iPhone. iPhone is charged to 100% See user using iPhone. See user opening apps and never closing them on the recently used app list. See recently used list grow to 66. User gets 141 texts. User gets 2 more phone calls than last time. 71 hours and 1 minute later iPhone has 8% battery charge. See the battery in red. User charges it.
See user get only 1 minute difference in battery life. See user not bother to close apps anymore. See user also explain this is not exactly scientific. See user release Spot to chase down Dah-veed. See user and Jane get busy now.

What is better than WAP 200

HI,
I have a small business, i use to have an Access Point from another brand, I had a lot of problems using it like every time it looks like it freeze, I can see the wireless but I don’t get internet access from it, and I need to reboot it to fix this issue, this issue might happen 3 days per week or more.
I removed it and installed the WAP200 and since that time the issue has been gone, i faced it on the WAP200 few times but its ok so far my wireless is good and everything is ok,
The problem that I am facing now is the signal range, the WAP as you know has 2 antennas, and 1 send and 2nd receive,
I used an 8dbi indoor antenna to make the signal go more in range but it still didn’t reach the range I need.
My question is: is there something better then the WAP200 in range and it might have 4 antennas (2 send - 2 receive)
Or is there any other solution to cover all my office using 1 AC only?
i don’t want to go on with repeaters as my office is not that big it’s a normal apartment from 6 rooms with a corridor between them.
Any help would be great.
Thanks for reading this

I used an 8dbi indoor antenna to make the signal go more in range but it still didn’t reach the range I need.
Good gosh. That's a very, very strong antenna.
I'm no expert with Small Business range, but with the enterprise range, I personally won't recommend this strong antenna. The reason is because the client can hear the strong signal from the WAP, HOWEVER, the WAP will NOT be able to hear the weak signal from the client.
My question is: is there something better then the WAP200 in range and it might have 4 antennas (2 send - 2 receive)
Or is there any other solution to cover all my office using 1 AC only?
How big is this office? I mean can you see your neighbor's wireless? What are the walls made of? What's above and below your office. These questions matters alot.

What is better Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Exel

I am working on Macbook pro retina for around 16 hours a day, it is ok but the screen is to small. I am opening about 25 - 30 EXCEL windows, 20 - 25 safari windows at the same time. Excel windows are small, they only show 40 rows and S column Now I am considering buying iMac 5k ( but the screen is only 27", however a very high resolution but I think that fonts and digits displayed may be too small ). I am also considering Mac Mini or Pro with 40" 4K TV ( 4k computer monitors are 27 - 31" , so better idea would be purchasing iMac 5k ) . The problem is that 40 - 42" TV don't have Display Port ( I can't find it anywhere )
Please help me to choose what would suit my needs better. I need large screen to work comfortably with an Excel sheets. What is better? Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Excel ?. The other problem I have is that when I spend 16 hours at work with retina macbook , my eyes are ok. Using the 30'' Dell screen 2560/1440 my eyes are tired after 2 hours.
Thanks for your help on advance
Best regards
David

Currently you can only get 4 K at 30 Hz via HDMI. Some users have reported jerky curser movement because of the 30 Hz.
I would go for the 5K iMac. You can add a second screen at 4K.
FaceTime HD camera
Simultaneously supports full native resolution on the built-in display and up to 3840 by 2160 pixels on an external display
Support for extended desktop and video mirroring modes
The Mac Mini supports:
Support for up to two displays at 2560 by 1600 pixels, both at millions of colors
Thunderbolt digital video output
Native Mini DisplayPort output
DVI output using Mini DisplayPort to DVI Adapter (sold separately)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
HDMI video output
Support for 1080p resolution at up to 60Hz
Support for 3840-by-2160 resolution at 30Hz
Support for 4096-by-2160 resolution at 24Hz
The 2013 Mac Pro can use three and more displays:
Mac Pro (Late 2013): Using multiple displays - Apple Support
I would go for multiple screens

What's better than Illustrator?

I've been using Illustrator for many years and several versions. My usage is nominal and occasional/once a week, and I don't get very sophisticated for my needs, so it has been OK so far. I do not do commercial work but know Ai is the "de-facto std".
But I read this forum often and see many criticisms of Ai and I do have occasional issues with Illy with tools and UI....just not as easy or robust as it could/should be...cumbersome at times.
I see JET and others here make great use of Illy but also criticize (justifiably) it for not being as good as other vector tools.
I know there are competitors, Inkscape is free, others less costly than Illy; and seemingly better/easier/faster to use...at least for some things.
So my question: What is better than Illustrator (I'm using CS5) and why? What can they do better than Ai? Is it worth having a second program and learning (tho I suspect the learning curve should be easy as they do similar things but have different GUI). Or replacing Illy with something?
Pro's/Con's that would make one make the effort to try/use something else? I don't even know what out there is better than Illy. I've searched www and got a few hints but nothing very significant.
Am I wasting my time looking?
Your feedback welcomed to help me decide whether to explore/trial other programs.

I see JET and others here...criticize (justifiably) it for not being as good as other vector tools.
I can't speak for "and others", but since I'm the only one you mention by name:
If you've already deemed the criticism justifiable, then you must already know what that criticism says. When I criticize Illustrator, I don't just say "Illustrator is crap" and leave it at that, unsupported. I'm careful to explain myself with facts pertinent to the context of the discussion. I actually own and know how to use the other programs to which I compare. I've often posted lists of comparitive features.
I've always used my real name here and sign all my posts with my initials. So finding my comments is not difficult.
I know there are competitors, Inkscape is free, others less costly than Illy; and seemingly better/easier/faster to use...at least for some things. So my question: What is better than Illustrator (I'm using CS5) and why? What can they do better than Ai?
Didn't you just answer your own question? Other than the broadly general things you just mentioned, what program do you want to compare, and for doing what? Surely you're not asking someone to do an exhaustive feature-by-feature comparison between Illustrator and all similar programs in this one thread?
All you've said about what you use Illustrator for is that your use is nominal, occasional, unsophisticated, and non-commerical. Mine isn't. Commerical graphics has been my livelihood for over 40 years. Vector-based illustration is both a speciality and a passion.
I...knowAi is the "de-facto std"
"Defacto standard" is self-fulfilling. It's effectively equivalent to saying "More people use Illustrator because more people use Illustrator."
So what? More people ride Vespa scooters than KTM motorcycles. But which one would you call "professional quality"? You can use either one to pick up a gallon of orange juice at the corner store. But if you enter an enduro, the KTM will get the job done with alot less stress.
The myth is that most software buyers choose the best. That's as naive as the faith that most voters do.
Illustrator has been slothfully resting on its "defacto standard" haunches since the dark ages (AKA the 80s). "Defacto standard" be hanged.
I do have occasional issues with Illy with tools and UI....just not as easy or robust as it could/should be...cumbersome at times.
Okay. What issues? State something specific and users actually familiar with other programs can compare.
This is the 21st century. There's really little new under the sun here. A 2D drawing program is just an interface pasted on top of mostly the same old geometric functionality. The competitive advantage goes to the offering that best (easy) and most fully (robust) empowers the user. The multiplication of easy and robust yields elegance. That's a term I've never applied to Illustrator. Illustrator is one of the oldest of the bunch, lounging under the sun for so long it's at risk of skin cancer. Yet it still fails to provide basic functionality users of other drawing programs have taken for granted for decades.
Examples that may be germane to your casual, non-commerical use? Try these things in Illustrator:
Star Tool: Draw a star. Now change the number of points it has.
Arc Tool: Draw 36 degrees of a circular arc.
Label that star with a dimension.
Distribute a group of different objects along a curve.
Uniformly space Blend steps along a non-uniform curve.
Attach a Blend to a closed path and have the first/last instances properly positioned.
Knife Tool: Cut across an open unfilled path.
Connect a text label to an object that stays connected when you move it.
Paste a simple graphic into a text string so that it flows with the text.
Perform a Find/Replace on carriage returns.
Round Corners: Apply it to an accute or obtuse angle and have it actually yield the radius you specify.
Crop a raster image.
Rotate something. Go back later and find out what its rotation angle is.
Pathfinders: Use them without wrecking existing fills/strokes.
I could go on (and have). How long a list do you want? All the features/functions associated with the above basic operations (and many more) are substandard, half-baked, or even non-existent in Illustrator. This is "professional"-grade software? No, it's largely consumerish rubbish sold at exhorbitant prices just because it's the "defacto standard."
Is it worth having a second program and learning...
Obviously, it is to me (and a third, and a fourth, and...). As I've said many times in this forum, I don't know how anyone can legitimately claim to compare two programs if they've only got workaday familiarity with one.
As with any other endeavor, the more drawing programs you're comfortable with, the less arduous it is to pick up another, because you tend to pick up on the underlying principles involved, as opposed to just becomming habituated to a particular program's command locations and procedures by rote.
But you've been using AI for "many years" and find it to be "OK". So if you're happy with it, use it.
I have a cheap, consumerish Ryobi table saw and it's "OK." But I didn't pay a professional-grade price for it, either. And I'm sure not going to write glorious reviews on it, call it "professional," and get all fearfully brand-loyal defensive about it if someone dares suggest I might ought to learn to use a different one. My use of it, like yours, is merely occasional. But I also presently need to build a TV cabinet, and I'm dreading it. If I were to open a cabinet shop, I'd be much more discriminating, and would do my own homework to make an informed decision.
Or replacing Illy with something?
One doesn't have to "replace." There's nothing any more wrong with using more than one 2D drawing program than there is with using more than one 3D modeling program, or raster imaging program, or page layout program, or word processor, or video edting program, or....
Pro's/Con's that would make one make the effort to try/use something else?
That depends on what one is doing with it. Not knowing that, I can again only offer generalities that matter to me: If you've only ever used one program of a particulat kind, you're rather in the dark regarding functionality that you may be missing that may be important to you. (Second-degree ignorance: You don't know what you don't know.) If you're mission-dependent upon that one program, you're also kind of captive to the whims and agenda of its vendor.
That very well may not matter to you, given your nominal, occasional, unsophisticated, and non-commerical use. And if so, that's fine.
I don't even know what out there is better than Illy. I've searched www and got a few hints but nothing very significant.
But you just said you've been reading a bunch of posts here which mention other programs.
Am I wasting my time looking?
Only you can answer that about your time. Time is all any of us have.
Your feedback welcomed to help me decide whether to explore/trial other programs.
No offense, but frankly it sounds like you're just not motivated enough to do your own homework. If you are sufficiently motivated, visit the websites of other drawing program vendors. Read the features lists. Dowload the demos, read the documentation, and try them out. Visit the programs' user forums. Or, if it's really not that important to you, don't.
If you've got questions about specific functionality and/or specific programs, be more specific about what you do (or want to do).
JET

So what is better - time efficient - Google Sketch or Strata 3d SE for ibooks author use?

Similar Messages

Maybe you are looking for