So what's the difference bewteen "packet data" and...

just wanna know the difference between "packet data"and "highspeed GSM"while creating new access point in destination section.
totally confused,any help should be appreciated.

Essentially nothing.
Depending on what you have your compiler strictness level set to, you can get it to generate a warning when you use an uninitialized variable.
In Java, variables are assigned a default value dependent on type. All subclasses of Object are assigned a default type of null, and all primitive number data types are assigned a default value of 0.
This differs from (for example) C, where variables are simply assigned a location in memory when they are declared, and the value of the variable is whatever was currently in that memory location when allocated. Using uninitialized variables in C is generally a big no-no.
You'll find a lot of old-school C programmers who migrated to Java will initialize their variables :)
Btw, this question probably belongs in another forum.

Similar Messages

What is the Difference Between Sys Date and Effective Date ??

Hi Gurus,
Can any one pls let me know What is the Difference Between Sys Date and Effective Date ??
with regards
User600722

EFFECTIVE DATE usually refers to a date-tracked record (although not exclusively).
Date-tracked records in Oracle HR have an EFFECTIVE START DATE and an EFFECTIVE END DATE. The record is 'EFFECTIVE' between these dates. In reports, you often use SYSDATE to compare to these two dates to find the CURRENT effective record, e.g. SYSDATE BETWEEN EFFECTIVE START DATE AND EFFECTIVE END DATE.
When you make changes to a HR record, you can choose between DATE TRACKING options, such as CORRECT or UPDATE (there are others too). CORRECT will overwrite the record and replace the data with your changes. This is normally used when you need to correct something that is wrong. UPDATE will create a new version of the record from the EFFECTIVE START DATE you choose. It will also set the EFFECTIVE END DATE of the previous record to the day before your new record's EFFECTIVE START DATE. That enables a history of records to be maintained so you can see what your data looked like at ay one point in time.
Regards
Tim
Edited by: TimW on Sep 23, 2008 2:37 PM

What is the difference between packet-speaker and packet-publisher?

What is the difference between packet-speaker and packet-publisher in Coherence?

I believe that both are responsible for sending packets on the network. The packet speaker is used by the packet publisher when the publisher determines that there is a good chance that the send operation will block. By allowing the speaker to handle the potentially blocking send operation the publisher can continue to process outgoing packets.

What is the difference between delivery date and actual goods issue date?

Hi ,
Can you please tell me the difference between Delivery date and Actual goods issue date ?
Delivery data can be be greater than goods issue date?
Thanks,
Ajay

Hi Ajay,
Delivery date means its the original date on which the delivery should be done.Actual goods Issue date is the date on which goods to be delivered according to the purchase order.There can be delay in the delivery so we maintain 2 objects.
Yes delivery date can be greater than Goods Issue date.
Hope this clears
Regards
Karthik

What's the differences between GL date and accounting date?

If there is anything different please let me know .
If they are the same. why the system distinguish them?
thanks

These are different, though I can understand some confusion, since so much of the time they will end up being the same value. What you will find if you look at the Oracle tables is that these dates may be stored in different places in Oracle, as Oracle stores them matching up to either the accounted process or the g/l posting process.
John Dickey

What is the difference between jsp :include and server side include

what is the difference between jsp :include and server side include(request dispatcher include method)????
i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
do suggest if u hav ny other diff in this context...

The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
- Saish

What are the differences between ECC5.0 and 6.0 new GL functionality

Hi Experts,
What are the differences between ECC5.0 and 6.0 new GL functionality.
If we want to implement IFRS, I think New GL functionality is very helpful, but why sap is recommending only for ECC6.0 new GL functionality, Eventhough this functionality is available in ECC5.0.
Best Regards,
Dharani

Dear,
ECC 5.0 vs. ECC 6.0/SAP ERP 6.0
Functionality not available in the new G/L with mySAP ERP 2004 and ERP Central Component (ECC) 5.0:
Transfer prices
Statistical key figures
Euro translation
Audit Information System (AIS)
Archiving
Data retention tool
Regards,
Chintan Joshi.

What's the difference between BB10 London and Liverpool?

What is the difference between BlackBerry London and BlackBerry Liverpool? I'm having a hard time with this.
Thanks!
Solved!
Go to Solution.

The only difference is the radio bands within each...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What's the difference between "local reminder" and "push notification?

A friend has been bugging me about this, does anyone know what's the difference between "local reminder" and "push notification" in an iPhone app?

In a nutshell, local notifications are popup notifications from applications on your phone, based on data that's already on the local phone. Push notifications are popup notifications you get when new info (like an email, tweet, or update from something like Facebook) gets pushed to your device from a server.

What's the difference between FM 'UPLOAD' and FM 'ALSM_EXCEL_TO_INTERNAL_T'

What's the difference between FM 'UPLOAD' and FM 'ALSM_EXCEL_TO_INTERNAL_TABLE'
thanks!

hi,
Generally FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' is used for reading Excel sheet i.e, either row wise or column wise . where as WS_UPLOAD will read the entire data in to an internal table in a file format.
for illustration as how it is used check this out
PARAMETER p_infile like rlgrap-filename.
*START OF SELECTION
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       exporting
            filename                = p_infile
            i_begin_col             = '1'
            i_begin_row             = '2' "Do not require headings
            i_end_col               = '14'
            i_end_row               = '31'
       tables
            intern                  = itab
       exceptions
            inconsistent_parameters = 1
            upload_ole              = 2
            others                  = 3.
if sy-subrc <> 0.
    message e010(zz) with text-001. "Problem uploading Excel Spreadsheet
endif.
http://www.sapdevelopment.co.uk/file/file_upexcelalt2.htm
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = gd_file
      has_field_separator     = 'X' "file is TAB delimited
    TABLES
      data_tab                = it_record
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
    IF sy-subrc NE 0.
      write: 'Error ', sy-subrc, 'returned from GUI_UPLOAD FM'.
      skip.
    endif.
http://www.sapdevelopment.co.uk/file/file_uptabpc.htm
Regards,
Santosh

What's the difference between deleted messages and trash?

what's the difference between deleted messages and trash?

A Time Capsule is hardware. It's basically an Apple AirPort Extreme wireless router with a built-in hard drive. For more info on this product:
http://www.apple.com/timecapsule/
Time Machine is a software application that allows your Mac to backup its data automatically to the hard drive on the Time Capsule. For more info on this software, which is included with the Leopard, Snow Leopard and Lion operating systems:
http://www.apple.com/findouthow/mac/#timemachinebasics

What is the difference between Category Mgmt and Spend Analysis?

Hi Friends
What is the difference between Category Mgmt and Spend Analysis?
Regards
Chinna Krishna

Hi Chinna
Here are my two cents on this questions
1. Catagory Management : It pertains to all sourcing activities that a purchasing group does for a specific catagory of items ( say tyres, bearings, etc. in automobile industry scenario OR steel sheets, electric motor, etc. in consumer durables industry scenario) in order to meet companies strategic goals like cost, quality, delivery and new product introduction. It also involves the strategic sourcing piece for that category. Typically it can include following activities for a category which is being managed
- Identifying current and future business & technical requirements
- Constant vigilence and analysis of supply market for that category ( and also identifying new sources)
- Lauching various projects within category focussed on cost reduction, quality improvement, delivery improvement. This may include some of activities like supplier analysis. RFx, Reverse auctions, contract negotiation, etc.
- Monitoring the category specific supplier performance
Category Management team typically consists of cross functional team and it is iterative process (continuous improvement).
Category Management in covered to some extent in E-Sourcing application and its analysis is covered in Spend Analytics application. Fully blown category management is on road map of SAP but none of the current functionalities addresses it fully.
2. Spend Analysis: This involves analysis of the spend at highest level of organization. To improve the data quality, it typically involves spend data standardization & enrichment, supplier normalization and spend categorization. Once you have clean data, one can slice and dice the data to gain insight into the spend and identify opportunities for launching the various initiatives focussed on cost, quality and delivery.
SAP Spend Analytics application covers this spend analysis capability.
Its a long answer and hope it helps you.
Bhushan

What is the difference between (SEPA Structured) and (SEPA Unstructured)?

Hi,
Could you please teach me about "Format Payments (SEPA Structured)"
and "Format Payments (SEPA Unstructured)"?
1.What is Format Payments (SEPA Structured)?
Is (SEPA Structured) used with which case?
2.What is Format Payments (SEPA Unstructured)?
Is (SEPA Unstructured) used with which case?
3.What is the difference between (SEPA Structured) and (SEPA Unstructured)?
The customer is checking Note.791226.1.
However, he says that he cannot understand these two differences.
Please teach me.
Thanks.

From the European Payments Council website:
Remittance information: structure the unstructured
The SEPA Credit Transfer Scheme permits the end-to-end carrying of remittance data on a structured or unstructured basis appropriate to the nature of the payment (the remittance information usually contains details of the contract underlying the transaction such as an invoice number, for example). The length of the remittance information in the SCT Scheme is fixed at a standard length of 140 characters and banks are obliged to pass on the full remittance information.
The EPC supports a proposal developed by the European Association of Corporate Treasurers (EACT), which allows companies to agree on a structure for the remittance information. The EACT suggestion on how to structure the "unstructured" remittance fields allows companies exchanging a credit transfer to agree, among other, on information to be transmitted in a specific manner. Banks will carry remittance information structured in such an agreed way unaltered throughout the process chain.

What is the difference between interactive report and alv interactive repor

what is the difference between interactive report and alv interactive report
could u plz explain clearly.

Hi Rajesh,
interactive report or alv interactive report , both are same but except the viewer, Abap List Viewer (ALV).
Here in i am placing a sample simple ALV Interactive report.
Just double click on the customer number to go to the next screen.
*& Report ZKAL_ALV_INTERACTIVE_1                                      *
REPORT ZKAL_ALV_INTERACTIVE_1                  .
TYPE-POOLS: SLIS.
TYPES: BEGIN OF TY_KNA1,
          KUNNR TYPE KUNNR,
          NAME1 TYPE NAME1,
          ORT01 TYPE ORT01,
        END OF TY_KNA1.
TYPES: BEGIN OF TY_VBAK,
          VBELN TYPE VBELN,
          ERNAM TYPE ERNAM,
          ERDAT TYPE ERDAT,
          NETWR TYPE NETWR,
          WAERK TYPE WAERK,
         END OF TY_VBAK.
&--WORK AREA & TABLE DECLARATION--
DATA: W_KNA1 TYPE TY_KNA1.
DATA: T_KNA1 TYPE STANDARD TABLE OF TY_KNA1 INITIAL SIZE 1.
DATA: W_VBAK TYPE TY_VBAK.
DATA: T_VBAK TYPE STANDARD TABLE OF TY_VBAK INITIAL SIZE 1.
&--FIELDCAT TABLE & WORK AREA--
DATA: W_FCAT TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: W_FCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT1 TYPE SLIS_T_FIELDCAT_ALV.
&--EVENT TABLE AND WORK AREA--
DATA: W_EVENTS TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS TYPE SLIS_T_EVENT.
DATA: W_EVENTS1 TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS1 TYPE SLIS_T_EVENT.
&--COMMENT TABLE & WORK AREA--
DATA: W_COMMENT TYPE SLIS_LISTHEADER.
DATA: T_COMMENT TYPE SLIS_T_LISTHEADER.
DATA: W_COMMENT1 TYPE SLIS_LISTHEADER.
DATA: T_COMMENT1 TYPE SLIS_T_LISTHEADER.
&----APPENDING FCAT -
W_FCAT-COL_POS = 1.
W_FCAT-FIELDNAME = 'KUNNR'.
W_FCAT-SELTEXT_M = 'CUST. NO'.
W_FCAT-HOTSPOT = 'X'.            "HOT SPOT HAND SYMBOL
W_FCAT-EMPHASIZE = 'C119'.       "FOR COLORING THE COLUMN 1
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
W_FCAT-COL_POS = 2.
W_FCAT-FIELDNAME = 'NAME1'.
W_FCAT-SELTEXT_M = 'CUST. NAME'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 3.
W_FCAT-FIELDNAME = 'ORT01'.
W_FCAT-SELTEXT_M = 'CITY'.
APPEND W_FCAT TO T_FCAT.
W_FCAT1-COL_POS = 1.
W_FCAT1-FIELDNAME = 'VBELN'.
W_FCAT1-SELTEXT_M = 'ORDER NO'.
W_FCAT1-EMPHASIZE = 'C519'.
APPEND W_FCAT1 TO T_FCAT1.
CLEAR W_FCAT.
W_FCAT1-COL_POS = 2.
W_FCAT1-FIELDNAME = 'ERNAM'.
W_FCAT1-SELTEXT_M = 'NAME OF PARTY'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 3.
W_FCAT1-FIELDNAME = 'ERDAT'.
W_FCAT1-SELTEXT_M = 'DATE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 4.
W_FCAT1-FIELDNAME = 'NETWR'.
W_FCAT1-SELTEXT_M = 'ORDER VALUE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 5.
W_FCAT1-FIELDNAME = 'WAERK'.
W_FCAT1-SELTEXT_M = 'CURRENCY'.
APPEND W_FCAT1 TO T_FCAT1.
&--APPEND COMMENTRY--
W_COMMENT-TYP = 'H'.
W_COMMENT-INFO = 'CUSTOMER DETAILS'.
APPEND W_COMMENT TO T_COMMENT.
CLEAR W_COMMENT.
&--APPEND EVENTS TABLE--
W_EVENTS-NAME = 'TOP_OF_PAGE'.
W_EVENTS-FORM = 'TOPPAGE'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS-NAME = 'USER_COMMAND'.
W_EVENTS-FORM = 'SUB2'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS1-NAME = 'TOP_OF_PAGE'.
W_EVENTS1-FORM = 'TOPPAGE1'.
APPEND W_EVENTS1 TO T_EVENTS1.
CLEAR W_EVENTS1.
W_EVENTS1-NAME = 'USER_COMMAND'.
W_EVENTS1-FORM = 'SUB3'.
APPEND W_EVENTS1 TO T_EVENTS1.
SELECT-OPTIONS: CUSTNO FOR W_KNA1-KUNNR.
SELECT KUNNR
         NAME1
         ORT01 FROM KNA1 INTO TABLE T_KNA1
         WHERE KUNNR IN CUSTNO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
   I_BACKGROUND_ID                   = 'BIKE'
   I_GRID_TITLE                      = 'CUSTOMER DETAILS'
   IT_FIELDCAT                       = T_FCAT
   IT_EVENTS                         = T_EVENTS
TABLES
    T_OUTTAB                          = T_KNA1 .
FORM TOPPAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = T_COMMENT
     I_LOGO                   = 'LOGO_ALV'.
ENDFORM. "END OF TOPPAGE SUB.
FORM SUB2 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
READ TABLE T_KNA1 INTO W_KNA1 INDEX FIELDS1-TABINDEX.
SELECT VBELN
         ERNAM
         ERDAT
         NETWR
         WAERK
               FROM VBAK
               INTO TABLE T_VBAK
               WHERE KUNNR = W_KNA1-KUNNR.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
   I_BACKGROUND_ID                   = 'KALEEM'
   I_GRID_TITLE                      = 'LIST OF ORDERS'
   IT_FIELDCAT                       = T_FCAT1
   IT_EVENTS                         = T_EVENTS1
TABLES
    T_OUTTAB                          = T_VBAK.
ENDFORM.    "END OF SUB2.
FORM TOPPAGE1.
&--APPEND COMMENTRYOF SECONDRY SCREEN--
W_COMMENT1-TYP = 'H'.
W_COMMENT1-INFO = 'LIST OF ORDERS'.
APPEND W_COMMENT1 TO T_COMMENT1.
W_COMMENT1-TYP = 'S'.
W_COMMENT1-KEY = 'CUSTOMER'.
W_COMMENT1-INFO = W_KNA1-KUNNR.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT.
W_COMMENT1-TYP = 'A'.
W_COMMENT1-INFO = W_KNA1-NAME1.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = T_COMMENT1
     I_LOGO                   = 'LOGO_ALV'
REFRESH T_COMMENT1.
ENDFORM.    "END OF TOPPAGE1
FORM SUB3 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
    READ TABLE T_VBAK INTO W_VBAK INDEX FIELDS1-TABINDEX.
SET PARAMETER ID 'AUN' FIELD W_VBAK-VBELN.
CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
ENDFORM.
U can also find some of the useful codes on WIKI-SDN.
Reward helpful Answers.
Regds,
Kaleem.

What is the difference between smart forms and scripts.?

what is the difference between smart forms and scripts.?

Differences between Smartforms and SAPscript
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Routines can be written in smartforms tool.
d) Smartforms generates a function module when activated.
e) Smartforms can create web enable forms like XML
f) smartforms itself contine subroutine pools need not to main separetly like in case of scripts
Request you to refer the following links
www.sap-img.com/smartforms/smartform-sapscripts.htm
www.erpgenie.com/abap/smartforms_sapscript.htm
Sapscript vs Smartforms
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated
Scripts are client dependent whereas smartforms aren't.
Upto 99 main windows are possible in scripts and only one in smarforms.
To create multiple main windows in scripts, you just have to give the window type as MAIN whnever you create a window.
Scripts still exists but smartforms are in use from 4.6c version, now the lastest version of these two is adobe forms
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaptation of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
Reward Points if useful.

So what's the difference bewteen "packet data" and...

Similar Messages

Maybe you are looking for