So where are the final 802.11n updates ???

The 802.11n protocol (802.11n FINAL, NOT 802.11n DRAFT) has been official almost a month now... So when will the firmware updates incorporating the ratified 802.11n protocol be released for our Wireless-N enabled devices ???

What is the model no of the Router?Based on the model no.you can check on the Linksys Website www.linksys.com/download 
for the available firmware.

Similar Messages

  • Will Linksys wireless routers be updated to the final 802.11n spec when its finished?

    Will Linksys wireless routers be updated to the final 802.11n spec when its finished? I read that most can be updated to the final spec with a firmware update.

    I can't see why they wouldn't be. There'd be a whole lot of people upset if they didn't...
    A+ Certified, over 15 years of hands on computer and home networking experience...and I still get lost!

  • Re: Tecra A10 - where are the release notes for updated BIOS?

    Hi,
    I have a problem with my Tecra A 10, it occassionally shuts itself down.
    I've updated from BIOS 1.4 to BIOS 3.0 to see if this fixes it.
    I can't find any release notes to see what has changed between BIOS revisions, can someone point me to them?
    Thanks
    Dominic

    Hi as***,
    Thanks for that, exactly what I was looking for.
    I won't know if it's fixed it or not until I run the laptop for a few days as it only happens every now and again.
    I can already see faster boot times after the bios update though, which is one of the things listed in the bios change history so it was worth updating it.
    The laptop is only a few months old, I checked the heat sink before I updated the bios as I read this shutdown problem can be caused by overheating due to a clogged heat sink but mine is clean already.
    It also has a problem with the USB ports, sometimes when I plug in a USB device it blue screens, again not consistently, just every now and again. I'm hoping the bios update might help with that as well but still going to look at any other firmware that might help as well.
    Thanks
    Dominic
    P.S. Here is the change history for anyone else searching
    ACPI Flash BIOS version 3.00 for Tecra A10/M10 (PTSB3U/PTMB3U/PTMB7U)
    Change History
    Version 3.00 - 2009-10-29
    o Implemented the INTEL specification for the Mobile Intel 45 Express Chipset (Cantiga) to improve stability.
    o Changed the BIOS Setup Menu for Virtualization Technology from Enable/Disable to Disable/VT-x&VT-d/VT-x Only/VT-d Only.
    o Added eSATA HDD boot support.
    o Fixed: Internal USB devices may be shown as removable devices in the Windows 7 "Devices and Printers" window.
    o Improved "resume from hibernation" stability.
    o Improved boot stability when the Computrace function is enabled.
    Version 2.00 - 2009-02-24
    o Implemented the INTEL specification for the Mobile Intel 45 Express Chipset (Cantiga) to improve stability.
    o Improved stability of 64-bit Windows.
    o Added support for 8GB memory on 64-bit Windows Vista.
    Version 1.90 - 2008-12-15
    o Added support for Penryn processor E0/R0 Stepping.
    o Implemented INTEL specification for Mobile Intel 45 Express Chipset (Cantiga) to improve stability.
    o Added support for Penryn Seam processors.
    o Improved Operating System (OS) load speed.
    Version 1.80 - 2008-11-20
    o Added support for Penryn processor E0/R0 Stepping.
    Version 1.70 - 2008-11-06
    o Added countermeasures for the chip which cannot read a Thermal register. (Updated the VGA BIOS)
    o Added Merom Seam processor support.
    o Added Merom Pentium Dual-Core processor support.
    Version 1.50 - 2008-09-30
    o The thermal parameter for the Wireless-WAN model is implemented.
    o LAN Boot time is improved.
    o Corrected: VGAPOST time is to long.
    o Corrected: Chip can not read a thermal register.
    Version 1.40 - 2008-09-01
    o First production BIOS release for these models.
    Applicable Models:
    Tecra A10-SP5920R, A10-ST9010, A10-S3501, A10-S3552, A10-SP5802, A10-SP5802A, A10-SP5920A, A10-SP5908, A10-S3553, A10-S3511, A10-SP5802C, A10-SP5920C, M10-ST9110, M10-S3401, M10-S3412, M10-S1001, M10-S3453, M10-S3452

  • Where can I buy the 802.11n updater?

    I want to buy the 802.11n updater. I'm at work on my PC and can't find a URL on Apple's website for it. I just want to put it on my usbkey disk and take it home to my mac.
    How can I buy this update? Surely it directs you to a webpage.

    I found it by searching in the store for the 802.11n enabler.
    Try this url for your self - http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/6064003/wo/jw5Cg OTRI0pz2wMO2GGMPxSaNqD/2.0.21.1.0.8.25.7.11.0.3

  • Where are the updates located for Mac App Store app?

    Hi,
    where are the updates located for Mac App Store app? I don't think /Library/Updates is the only location. Because I'm now having 10+ of Apps reporting updates is needed, but only 1MB+ files is located in /Library/Updates.
    Please help!

    If so just use the search bar in the top right to search for the update you are looking for.

  • HT1620 where are the patches that are being discussed all over in the media???  i have an iphone and ipad and had no APPLE updates for a long time.

    where are the patches that are being discussed all over in the media???  i have an iphone and ipad and have had no APPLE updates for a long time.

    Thank you... one would think that if Apple needed to push out something so important they would make it more obvious!!!

  • Where are the latest updates for PSE 11 located?

    Where are the latest updates for PSE 11 located?

    Unless you have the mac app store version, Editor>Help>Updates should get you all the available updates.

  • Where are the updates ???

    I am sorry if this was disscused before. I was wondering where are the updstes for Lumia 900 ATT? I am still on 8112, but I see now for a few weeks people talking about 8773 and 8779 versions. Anyone would like to explain? Thank you!

    Updates for Windows Phone 7 are rolling out gradually over serveral weeks (in a random order).
    When a new update is ready for your phone, you will get an update notification. There is no way to know exactly when the update will be ready for your phone. The update has been rolling out for a while thtough, so it shouldn't be much longer..
    Microsoft Windows Phone MVP
    Follow me on Twitter: @ThisIsMetro
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • Where are the updates that are not installed?

    If you do not install the updates, were are they? I had download automatic on and so there are a lot of install already donwloaded but not installed, where are they stored? Every update makes my computer more and more slower in starting up so now I am forced to do a complete reinstall. This never happenend to me when I was using my old g4.

    If you don't install an update then it isn't downloaded. If you select the option to save and not install then the installer file will be saved. Otherwise nothing is saved on your drive. The next time you use Software Update the uninstalled updates will simply reappear.

  • HT1600 after the update, i have only computers and settings icon, Where are the others ? youtube etc.

    after the update, i have only computers and settings icon, Where are the others ? youtube etc.

    Welcome to the Apple Community.
    Check you have an internet connection and that you are using the correct iTunes store location setting.
    Try restarting the router.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.

  • How do I answer calls with the KITKAT update?  I hit the flashing button but it's still ringing?  Where are the Answer settings?

    How do I answer calls with the KITKAT update?  I hit the flashing button but it's still ringing?  Where are the Answer settings?

    Aha!  Thank you!!!  That was not obvious. Sometimes I don't get the green and red icons.  So it's slide it to the right for answering and slide to the left for voice mail.

  • Why have all my previous "My Ratings" (stars) have been removed and Smart Albums(i.e. 5 star rating in past year) virtually destroyed in the update to the new Photos program?  Where are the "My Ratings" capabilities ?

    Upon updating to the new Photos program, all the previous "My Ratings" (1-5 stars) for photos have been removed. Why?  My "Smart Albums" using the "My Ratings", i.e. photos with a 5 star rating within the past year, have been virtually destroyed in the update.  The updates "modified" Smart
    Album deleted the "My Ratings" parameter, retained the Date parameter so now Smart Album includes every photo within the date range parameter.  Where are the "My Ratings" capabilities ?  It appears they have been removed.  If so, why ?

    Photos doesn't have true star ratings.
    However, when photos are migrated from iPhoto or Aperture to Photos, they will have keywords assigned, like "1 star" or "5 stars". You can create smart albums based on these keywords.
    You can also assign keyboard shortcuts so if you're in the keyword pane and type 1, it will assign the "1 star" keyword.

  • I finalized my iMovie project. Where are the .mov files? (1080,mov, 720.mov, etc.)

    Hi everyone I'm an iMovie newbie,
    I finalized my iMovie project. I am using iMovie 9.0.9 by the way. I can't seem to locate the movie files when I go to upload my video to YouTube. I also noticed that the files for my previous videos are gone as well. For now, I'm exporting using QuickTime, but that is taking way too much time and I have never had to do this before. I waited an hour for my project to finalize, where are the files? Where can I find them?
    Thank you in advance.

    Hi JBK
    *Huge thanks for this* - the link proved very useful. I tried the MPEG STREAMCLIP option and like yourself exported to QuickTime/Apple Intermediate Codex @ 100% quality (you can also export in DV mode with much the same results) - it worked fine but file sizes trebled and quality reduced (you can also. As you say its also a pain to have to go though another process. To be able to do it inside imove is a much better option (thanks to tjworld for that, who would have thought of doing that!!!) Surely this will be something Apple have to sort out in the next upgrade. So pleased that I can continue using the Zi6 as it's a really smart little camera - even though mine is pink one (the camera that is!) This is the first time I've used a discussion stream so thanks again all for the help
    Paul

  • Missing all export options in Adobe Premiere (can only export to final cut pro xml). Where are the options?

    Missing all export options in Adobe Premiere (can only export to final cut pro xml). Where are the options?

    There never was a trial version of FCP7. The application was only ever sold as part of the Final Cut Studio suite of applications. You might still find copies on eBay.

  • Where to download the IEEE 802.11N draft?

    HI,all
    Where to download the IEEE 802.11N draft?
    Respects!
    Min Quant

    The IEEE website is a good place to start. The following link is the result of a search on 802.11n:
    http://ieeexplore.ieee.org/search/freesearchresult.jsp?history=yes&queryText=%28802.11n%29&imageField.x=0&imageField.y=0

Maybe you are looking for

  • Can only see first and last frame of clip in the timeline HELP PLEASE

    Hi, my first time and I did look for an answer, but can't find one. I have premiere elements 4 and I am trying out ver. 9. In ver. 4 the clips in the timelin shows all the frames, but in ver. 9 it only shows the first and last frame of the clips. Is

  • Audit Log Reports

    Hi I have configured site collection audit settings but not able to get old data about users activities on portal using this feature. i have created it last dec 10th 2014 and whenever i run audit log reports, it generates report for only from dec 10t

  • BOUNDED RECOVERY: CHECKPOINT: in ggserr.log and report file

    Hi all, I recently setup GG Version 11.1.1.1 bidirectional and I have 2 extracts, 2 replicats and 2 pump parameter files. In the errorlog and report file I see " +BOUNDED RECOVERY: CHECKPOINT: for object pool 1: p3321868_extr: st+ +art=SeqNo: 230, RB

  • HT4772 How do you enable 802.1x on wired port when you have a thunderbolt display

    we have multiple users on macbook pro machines that have thunderbolt monitors when I create a profile the mobile config says FirstActiveEthernet. The issue is the first active ethernet is the built in port, can I change the string manually so it sees

  • How to view synchronous messages in sxmb_moni

    Hello, I have set the following parameters in sxmb_adm and still couldn't see the messages in sxmb_moni. Any help is appreciated. ::RFCADAPTER     ::      LOGGING       --->     3 ::RUNTIME     :: LOGGING     --->     1 LOGGING_PROPAGATION  --->1 LOG