So where we see the status of this work order request

Hi All,
I have submitted work order WO00034931 in SAP for a new vendor address but it seems my approver (Andre Vabre) never received it. In SAP, its status is Submitted for Approval.
So where we see the status of this work order request
Thanks,
Kumar

Hi
You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
variant conditions to define surcharges and discounts for a variant
Variant u2013Pricing steps
Create condition record
create a procedure where you enter the reference from the characteristic
Assign the procedures to either the characteristic values
configure the material in the sales order
The net price for the material is displayed
If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
In addition, the Conditions pushbutton is displayed.
On pressing this pushbutton,
One can see which conditions have
influenced the price.
I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
Thanks

Similar Messages

I can no longer see the top menu bar in itunes. where you see the status of syncing. where you have the option to click and move a song you are playing to the middle of the song, etc.

I can no longer see the top menu bar in itunes. where you see the status of syncing. where you have the option to click and move a song you are playing to the middle of the song, etc.

It's iTunes screen menubar:

WHERE TO SEE THE STATUS OF INFOOBJECT

HI EXPERTS,
IS THERE IANY TCODE TO FIND WHICH INFO OBJECT IS IN ACTIVE OR DELIVERED OR MODIFIED IN BW.
PLEASE LET ME KNOW.
CHEERS
DILIP

Hi,
Repair full request allows you to do a full load make sure that you get all the data in case you missed some delta data without disturbing the existing delta.
You need to do a full load and then mark it as a repair request.
But this'll work with ODS in overwrite mode. If you plan to do this for a cube, you'll have to delete the cube contents, otherwise you'll get erroneous and duplicate data.
Cheers,
Kedar

How to see the status of a FM IN BACKGROUND TASK?

Hi experts,
If I call a FM IN BACKGROUND TASK addition. I can't Debug the FM called in BACKGROUND TASK. Then whether there is a way to see the status of this FM IN BACKGROUND TASK? I want to know this task is finish or not.
Thanks.

Hi Kelvin,
I am also facing similar problem. I have come across few documents which have suggeted the way to test the FM in background. For this you will have to change the debugging settings, its in the Settings->Display and change all. Check the oprion for In background task.
A good document on settings of debugging.
http://www.sappro.com/downloads/Settings&SystemAreas.pdf
Regards,
Sana.

How do you see the status of an export?

Before 10.0.6 I used to see how much time was left when I exported a video, but no longer. Any idea where I can see the status of an export now?
Thanks,
Ray

Yes, click on the area where you can see the rendering status. They moved it there.

HTTP adapter: where to see the transformed output message

All,
I am a beginner in Webservices/HTTP interfaces in PI. I have to make changes on an existing custom interface which uses HTTP adapter. I have done the changes in the message mapping and tested it using the test tool. It seems OK.
However when we do end-to-end testing, data is flowing but bussiness needs a copy of the transformed data that has been sent out from PI.
I checked RWB->Message Monitoring-> Integration server(Database) and it showed the successful message. When I drilled further into this message, it showed the SOAP message (Version 0 and Version 1 with payload). The payload showed the data that ECC had sent to PI and not the transformed data that went out from PI to 3rd party via HTTP adapter.
Appreciate if you could guide me in right direction regarding where to see the Output/Transformed data that is actually sent to third parties.
I have checked SXI_MONITOR as well in PI but that also shows the payload only and not the transformed data.
Regards
SK
Edited by: Shirin K on Feb 18, 2010 3:10 PM

Hi ,
Go to particular message in SXI_MONITOR. In Message there will be window on left hand side. There will be Technical Routing.
Technical Routing> Payloads->Maindocument. This shows the Output data.
If you are not able to see Technical Routing inform you basis team they need to do some configuration in SXMB_ADM
Edited by: Rajhans Abhay on Feb 18, 2010 4:29 PM

Crystal Reports for Eclipse Free Version - What is the status of this tool?

I'm inquiring about the status of this tool now that SAP is on the scene.
I used it about a year ago and am coming back to it - I'm not finding much on the new SAP support site.
Is it being killed by SAP? I don't want to start a new project with a dead SDK...
If not, what is the latest release, where are docs for the latest release, and where can I download the latest release?
Thanks in advance.

Well, I tried that link, then tried to get to an article (link) that is behind 'Understanding the relationship between Crystal Reports, Java, and Eclipse' and I cannot get to the link.
I keep getting a SAP -- Expert Weblog Login challenge screen. I'm registered (I think) with all of the new SAP SDN and Business Objects developer networks (I mean - i'm logged in here, right?).
Lastly - I was the administrator and manager for the Business Objects OEM Premier Partner plan for my last company, and I am intimately familiar with this product - what I'm asking for is most likely not behind the scenes on some of these articles. What I need to know is what is SAPs commitment to this product, where is the original development team for it (are they being supported for Ganymede, etc.) and what are the future plans for it? I would prefer answers directly from SAP development management giving definitive direction on this product's future before I recommend taking a chance on it to my firm.

Dunning key - how/where to see the effect

hi consultant,
in f150 the dunning key maintained as below.
may i know where and how to see the effect of this maintenance?
dunning key                 max level                      print sep
1          1                    Triggers maximum dunning level 1
2          2                    Triggers maximum dunning level 2
3          3                    Triggers maximum dunning level 3
Z          0          X          Payment has been made, separate item display
thanks
rgds

You can view and activate or deactivate the installed web application scoped features as follows:
Go to Central Administration > Application Management > Manage Web Applications.
Select the web application of interest.
Click Manage Features on the ribbon.

During/after upgrading to ios8.1 my ipad air is looping is a screen where i see the apple logo after a minute or so i see a flash of bleu then black en the it starts over again....i can't even turn of.

During/after upgrading to ios8.1 my ipad air is looping is a screen where i see the apple logo after a minute or so i see a flash of bleu then black en the it starts over again....i can't even turn of. Help?

Hi,
Had the same issue. Hard reset not working.
What I did was: start your mac/pc and open iTunes, hold down the home button of the iPad (and while holding the button), connect it to the PC with the cable.
Keep pressing until you get a pop-up asking to upgrade or restore.
Hope this helps for you!
Xavier

WHER I SEE THE STOCK IN VARIENT CONFIGURATION

Hi
Gurus,
Where i see the stock of different varients available in plant .for example i want to the stock of yellow,red,black sheets with thichness and width from which this any t-code or tables.
Thanks in advance
avinash.pegarlawar

Hi,
It is not possible to maintain the stock for variant configuration materials. This is purely MTO scenario.
Regards,
V. Suresh

How can i see the status of a download in version 26.0? I could in previoes versionss

Now I have version 26. In previous versions with ctl J I could see the status and speed of downloads. Now I can't anymore. How to restore this capability.

Firefox didn't change the shortcut key for Download (CTRL + J)
Firefox Menu > Tools > Downloads
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

In which table i can see the status chnages

hi,
in which table i can see the status changes

hi,
it is not found there.
i am talking about staus change through status profile which is assigned in VOV8 to the document type.
any changes in ths status profile in sales order in which table i can find the same
shahrukh

12c where to see the enabled audited operations

hi,
I got to see the audited operation data in setup->auditdata but I am not able to find where to see the enabled audit operation names.
The following command shows only the list of operations can be audited but it doesnot say whether it is already enabled or not
emcli show_operations_list
please suggest me
cheers
Tamil

Try adding -view=DETAIL
bash-4.1$ ./emcli show_audit_settings -view=DETAIL
Audit Switch : Enabled (For all Operations)
Operations configured for auditing :
ADD_AGENT_REGISTRATION_PASSWORD : ENABLED
ADD_CS_TARGET_ASSOC : ENABLED
AGENT_REGISTRATION_PASSWORD_USAGE : ENABLED
AGENT_RESYNC : ENABLED
AG_AUD_CREATE : ENABLED
AG_AUD_DELETE : ENABLED
AG_AUD_MODIFY : ENABLED
APPLY_TEMPLATE : ENABLED
APPLY_UPDATE : ENABLED

CO88 - Where to See the results of Execution?

Gurus,
Where to see the results after executing CO88?
Kindly guide.
Thanks.

Dear,
In order maintaince screen follow the menu path CO02 - Goto> Costs> balance.
Or you can chek in order cost sheet itself, the actual cost sum is zero or not if ZERO than means settled.
Collectively you can see in KKBC_HOE report.
Regards,
R.Brahmankar

Where to see the output of my Application Engine Program ?

Folks,
Hello. I am creating my first AE program in Application Designer and test it in the 2-tier mode. I open the AE program in Appication Designer and click Edit ->Run Program. Then open the log file to see its execution and know the AE program is running out. But I don't know where to see the output of the AE program.
The AE program is only executing a SQL "select" statement. Its output is the ResultSet of the SQL.
Do any folks know where to see the output of the AE program ?
Thanks in advanced.

The AE program is only executing a SQL "select" statement. Its output is the ResultSet of the SQL.
Do any folks know where to see the output of the AE program ?The output of the select didn't go anywhere. You have to actually do something with the values selected. App Engine selects them and puts them in memory (if you tell it to through %Select), but where those values go depends on you. If you have a DoSelect, then your next action may be an SQL insert/update/delete or even another %Select. If it is another %Select, then I would expect your next action to be Call Section or PeopleCode.
If you just want to select data and print it to the app engine log file, then I would setup a step with a DoSelect/%Select and then a PeopleCode action. In your PeopleCode action, use MessageBox(0, "", 0, 0, "The value in field MYFIELD is " MYREC_AET.MYFIELD);
I wrote a blog post a few years ago with additional tips and tricks for AppEngine output: http://jjmpsj.blogspot.com/2008/05/appengine-output-tricks-reporting.html.

So where we see the status of this work order request

Similar Messages

Maybe you are looking for