So you need to use timeline for a simple slide show?
Do you have to do anything with the timeline to run a simple
looped slide show with no sound. What is a good rate (fps)? I am
desperate. Why does it not advance to the next slide? How do you
reset the program to its original defaults.
Thanks
ngreenhalgh wrote:
> Do you have to do anything with the timeline to run a
simple looped slide show
> with no sound.
Beyond adding your images and animating them...no. But not
sure what you are referring to
specifically when you ask what you have to do with the
timeline - you certainly need the timeline to
animate something over time. Flash will loop by default
unless told to stop.
What is a good rate (fps)?
"good" is relative - depends on your needs - 1 frame rate may
be good for some projects and very bad
for others - depends on how heavy the animation is.
I am desperate.
Desperate for what exactly?
Why does it not
> advance to the next slide?
Impossible to say without looking under the hood - "slide"?
Are you using slides or the main
timeline? We have no idea how your FLA is setup so we can't
possibly troubleshoot it - provide some
specific information or better yet the source file and we
will take a look.
How do you reset the program to its original
> defaults.
Not sure what you mean - default what? Panel layouts? Doc
Properties? Why would this solve your
problem(s)? The only way is to reinstall flash i believe -
why do you need to do this?
> Thanks
>
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Similar Messages
-
Is there a good flash tutorial for a simple slide show?
Basically I want to create a very simple slide show just like
the one on the
main page at www.bv.com
Is there a article or something anywhere so I can learn how
to do this using
Flash? Also is there an article on how to create text that
flys in from the
left or right?
Best Regards,
Chris Jumonville
iMedia Web Design
503.277.3553I googled "flash slideshow" and got 25,200,000 returns ;)
www.kirupa.com has one (loads external images)
and www.gotoandlearn.com might have one.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Chris Jumonville wrote:
> Basically I want to create a very simple slide show just
like the one on the
> main page at www.bv.com
>
> Is there a article or something anywhere so I can learn
how to do this using
> Flash? Also is there an article on how to create text
that flys in from the
> left or right?
>
> -
Do you need to use an email as an apple ID? We have a family email which is currently the apple ID so I can keep track of purchases but i have 2 iPhones and 2 itouches. Can all 4 devices have different apple ID under the same email address. Also I wanted to know because for the game center we wanted to keep track of each individual not just o e account. DID I MAKE SENSE
Figured it out. Thanks.
-
WHAT ABOUT FACE TIME? I'D LIKE TO KNOW IF YOU NEED A PHONE NUMBER FOR YOURSELF TO USE IT TO CALL FROM YOUR COMPUTER
Do you have iMessage? I think as long as that person has iMessage you can use Face Time to call each other.
-
Do you need an internet connection for airstream
i want to know if you need an internet connection for airstream on the (mini) Airport
No, an Internet connection is NOT required in order to use AirPlay with an AirPort Express Base Station (AX).
-
i changed my email for my apple id, but i can't change my iCloud account because i can't remember my old password, and now i need to use iCloud for my new IPhone but it isn't working, how do i fix that?
If the old ID is yours, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
When is LR5 adding D4s to its list of cameras. I need to use tethered for me shoots!
when is LR5 adding D4s to its list of cameras. I need to use tethered for me shoots!
2BNatural,
I am so sorry to hear of the issues you are having with adding data. We definitely want you to be able to have access to your data added. I apologize as we are unable to access prepaid accounts. Please reach out to our prepaid department at 888-294-6804 for further assistance.
LindseyT_VZW
Follow us on Twitter @VZWSupport -
Do you need a screen protector for iphone4s
Do you need a screen protector for iphone 4s ?
It depends on how you handle and use the phone. If you put it in a pocket or bag with loose change, keys, grit, etc, the oleophobic coating will likely scratch and sometimes the glass will scratch as well.
-
Can you manually add data to Nike + or do you need to use the Nano?
Can you manually add data to Nike + or do you need to use the Nano?
What if you are on a trip and forgot your Ipod. It would be great to be able to add lost data. or even edit the Ipod data on the Nike + websiteHi Hrbrmstr,
That will be very cool if you can create an xml file
that will allow us to add runs and edit runs on the
Nike+ site! The trick may be getting past the server
dragon which sends out a warning saying, "Your
workout data could not be sent to nikeplus.com
because the data could not be accepted by the server"
when it does not like the data it is sent.
For example, my runs that did not post had something
in common: when I read these xml files with TextEdit,
both have a line that says,
"<stepCounts><walkBegin>0</walkBegin>". There's also
a line that tracks steps run. It also said zero. Of
course, these lines should NOT read zero, because I
was not starting at zero steps! My guess is that this
anomaly makes the Nike+ server either reject or
delete these runs because the step count does not fit
my other runs.
Well, I'll leave this stuff to someone who knows more
than I. Glad you're here.
For jackt123, the longer is answer to your question
is that certain things that are not doable now may be
doable in the future. Stay tuned.
I just got the dragon today. "Your workout data could not be sent to Nikeplus because iTunes received an unexpected response from the server. Please try again later." Did you ever find out why this happened to you? I went on nikeplus and it did in fact upload my latest run. Now my goals are blank on nikeplus. -
Do you need to use H.264 encoding?
Good morning.
I'm using VisualHub to convert/encode my movies for my AppleTV. Do you need to use the H.264 encoding option or is it just a personal preference?
Thanks.
Mac Mini Mac OS X (10.4.4) 20" Apple Cinema Display, iBook G4, MacBook ProDo you need to use the H.264 encoding option or is it just a personal preference?
I can't speak on VisualHub specifically (though I hear great things about it) but, yes, I'd would say that it's personal preference.
I'm sure you've read this elsewhere, but the benefit to h.264 is that it's a more efficient algorithm compared to MPEG-4. In non-tech speak, that means that it produces smaller files size at the (relatively) same quality. The major downside, of course, is that h.264 takes substantially longer to encode than MPEG-4.
Depending on the your needs – how demanding are you about quality? - and constraints - do you have a lot of stuff to encode, but not enough time? - MPEG-4 should be fine. -
Hello Forum, you need a serial ports for software icprog to program EPROM and Pic
Hello Forum, you need a serial ports for software icprog to program EPROM and Pic.I was wondering if this or a similar card is compatible with my Lenovo Desktop h50-50 --> -> PCI-E 2 serial ports and 1 parallel port PCI-Controller Card 3 Port ► http://fli.zz.mu/cut/scheda-pci-e-2-porte-seriali-1-porta-parallela .
My my Lenovo Desktop h50-50 upgrade to win 10, If it is not compatible to win 10. I could use it too virtualizing win Xp? Thank since TIME FOR ANSWERS, I apologize for my bad English.
THANK JoeUnfortunately, no Sanyo phones are iSync compatible so you will not be able to synchronize your Contacts and Calendars with the phone.
Also, you may have problems with the Bluetooth adapter you purchased, as the only one officially supported by Apple for use with Macs is the D-Link DBT-120.
The Official Apple list of iSync compatible devices is here:
http://www.apple.com/macosx/features/isync/devices.html
It's always a good idea to check this list before purchasing a new phone.
Other phones are supported by third party plugins from here and here. But still no Samsung, Sanyo, LG etc. who all use thier own proprietary syncing protocols rather than the industry standard SyncML. These manufacturers also don't provide Mac software with their phones like the do for Windows users.
I'm afraid you're not going to have much luck if you stick with the Sanyo. I would seriously consider taking it back and swapping it for one of the handsets on the above linked pages. Personally I would recommend a Sony Ericsson model. I've always had excellent Mac compatibility with those. -
What do you think about using exceptions for something more than errors
if you look the java.lang.Exception description at the JDK javadoc, you can see the following text:
"The class Exception and its subclasses are a form of Throwable that indicates conditions that a reasonable application might want to catch."
... we can�t see "error" word anywhere!!
What do you think about using exceptions for something more than errors? Can be possible use them as a way for send information to upper layers?
Thankx in regards...it seems that what you say is a functional way of achiveing that, yes
but Exceptions are generally reserverd for "Exceptional" situations ie program messing up or invalid data
it does require a fair bit of processor time to actually generate and throw an Exception.
so, all in all its "better" to use "normal" condition flow control to achive what you want.. you can always return early, break loops, call methods to pass information -
Do you need a cell connection for AP to work?
Do you need a cell connection for AP to work?
Hi ..
Cellular or Wi-Fi either one.
It is considered, "wallet free" > Apple - Apple Pay -
Need pl/sql stmnts. for this simple logic
Hi,
I need PL/SQL program for this simple logic i am doing mistake somewhere unbale to trace
out ..
select * from GSR03_PO_DTL;
PO_NUM
L53177000 -- > no changes reqd (only one entry with new format)
L00041677 --> to be updated to L41677000(only one entry with OLD format)
L43677000 -- > no change reqd (exists one row with new format and old format like below)
L00043677 -- > to be deleted this is old format (and new format like above already exists)
EX:
L00012345 --- old format
L12345000 --- new format
Hope question is clear. I written the following program.
update is working fine but delete is not working.
Please help.
Thanks in Advance
Devender
declare
Cursor c_test is
(select po_num from GSR03_PO_DTL);
BEGIN
FOR r_test in c_Test
LOOP
dbms_output.put_line (r_test.po_num);
IF ('L'||substr(r_test.po_num,5,5)) = ('L'||substr(r_test.po_num,2,5)) then
dbms_output.put_line ('delete stmnt');
END IF;
EXIT WHEN c_test%NOTFOUND;
END LOOP;
FOR r_test in c_Test
LOOP
IF r_test.po_num like 'L000%' then
IF ('L'||substr(r_test.po_num,5,5)) is not NULL then
update GSR03_PO_DTL set PO_NUM = 'L'||substr(po_num,5,5)||'000'
where po_num like 'L000%' ;
dbms_output.put_line ('update stmnt');
END IF;
END IF;
END LOOP;
END;
*********************No need for PL/SQL, man.
SQL> SELECT po_no FROM po1
2 /
PO_NO
L53177000
L00041677
L43677000
L00043677
SQL> UPDATE po1 y
2 SET y.po_no = 'L'||substr(y.po_no,5,5)||'000'
3 WHERE y.po_no LIKE 'L000%'
4 AND NOT EXISTS ( SELECT null FROM po1 x
5 WHERE x.po_no = 'L'||substr(y.po_no,5,5)||'000')
6 /
1 row updated.
SQL> DELETE FROM po1 y
2 WHERE y.po_no LIKE 'L000%'
3 AND EXISTS ( SELECT null FROM po1 x
4 WHERE x.po_no = 'L'||substr(y.po_no,5,5)||'000')
5 /
1 row deleted.
SQL> SELECT po_no FROM po1
2 /
PO_NO
L53177000
L41677000
L43677000
SQL> Cheers, APC -
Can you automate an iPad keynote presentation like a slide show?
I have a very basic keynote presentation that I've created on my iPad 2. No fancy transitions, etc. Essentially slides with pictures and information. I need to have it run like a slide show and repeat itself over and over for a static display. Can someone help me accomplish this?
Thanks in advance.Yes, you will do it by setting the transition options for the slides.
See how to do it here http://http://support.apple.com/kb/HT3701
Maybe you are looking for
-
Interface Program for maintaining a table
Hi Experts, I am having a requirement,.,cud u please tell me how to proceed. 1. We have a table and maintaining manually. 2. we need a Interface to do it. 3. If i create a record with " Create with a template ..user id and a date field in the table s
-
I have a macbook pro, i want to work
with my old artwork on windows cd will it work?
-
I can't see my usb camera (Kodak CX7220)
Hi, The package libgphoto2 (2.1.4-2) does not contain my camera. So, I had to compile the new version (2.1.5) myself. After installed it, I dont know if I have to do something else, but when I run gthumb or gtkam, I still can't see my camera on the l
-
This scenario has probably been done to death, but I'd really appreciate it if someone could explain what to do. I have two wireless routers with built in switches: a D-Link and a Netgear. The D-Link is my main router, connected to a cable modem. I w
-
Photos to FCP- best color profile?
Greetings. What would the best color profile be for a .psd file to be used in FCP? For viewing on HD TV? Regular SD tv? My gut tells me something like sRGB, but I'm just not certain. Any help would be appreciated, and please let me know if you need a