So you want to get your files out of Aperture? Simple yet scary solution.

To remove your files from Aperture try this.
Select files you want to remove.
Delete them, yes delete them.
Go directly to trash and double click. Aperture folder in trash contains all of your deleted files and you can remove them all at once.
Please try this with a few non essential files at first and never empty the trash from the finder during this operation. I did this with 24 files at the Apple Store and it worked fine but make sure it works before you commit large numbers of essential files.
I want to say that I am very excited about the possibility of fully functional Aperture as advertised. For me this program is currently miles from that point but rest assured when it gets there I wil buy it!

In reading earlier posts there were several comments from folks who wanted to back ENTIRELY out of Aperture and from the discussions I surmise that some had commited whole libraries of images before testing the product.
So what good the project export when you want to quit entirely?
Let's say you have a studio and have been cataloging your files for years in folders by job number, client, and keyword. That you have say 6TB of images easily accessed by no software other than your own internal hard drive. That Aperture comes along and wants you to change your system because Apple says so.
I tested the software before buying and it falls short in so many areas as to be unusable for me.
If and when it's fixed I will buy save two hours and it will be paid for.

Similar Messages

  • When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?

    When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?
    I can login fine via this address.
    http://[Server Address]:[Port Number]/ReaderExtensions
    And I can apply the extension successfully, but when I attempt to download I receive the error above.
    Application Alert" The file could not be saved. Are you sure you want to lose your results?

    Please check the supported version of flash player on your client machine for LiveCycle : http://bit.ly/1wGD9t4
    Upgrade or downgrade it accordingly.
    Thanks,
    Wasil

  • How do you get your iphone out of the connect to itunes screen?

    How do you get your iphone out of the connect to itunes screen?

    What error message is it displaying? Check this Apple support document for information on specific error messages when restoring the iPhone. http://support.apple.com/kb/ts1275

  • When I go to restore my phone; is there any way to pick what you want back on your phone or do you have to get everything backed up?

    When I go to restore my phone; is there any way to pick what you want back on your phone or do you have to get everything backed up?

    Thank you.  I was afraid of that.  I backed up from iCloud.  I looked at the iTunes one - it had four different ones on there; was hoping I could see because my grandson's phone was redone last year (his mom messed it up then) and didn't know anything was backed up to iTunes.  He lost a lot of stuff that time. I'm just trying to get his phone back to par after someone changed his passcode on him as a joke and forgot what they changed it to a few days ago.  They should change it so one could go in and pick what they want or don't want.  Thank you again for your time.  I do appreciate it.

  • Iphoto is not responding. I get the message, "Your photo library was  not found. Do you want to find your iPhoto Library?

    IPhoto is not responding except with the message: " Your photo library was not found.  Do you want to find your iPhoto Library".  Then, "iPhoto can't continue without a photo library. Make sure the disk containing your iPhoto Library is connected.
    1. What disk are they talking about?
    2. I can access my photos by clicking on ALL IMAGES in SEARCH FOR.
    3. If I trash iphoto and re-install from my Install Disc 1, will I lose the photos?
    4. If so, what can I do to save my photos and get iPhoto working?
    I have an iMac with 10.6.8.
    Dave

    What version of iPhoto?
    Is there an iPhoto Library in your Pictures folder?

  • HT201272 How do you get your files that are hidden in the cloud?

    How do you get your files that are hidden in the cloud?

    What files are you looking for?
    GB

  • Your photo library was not found. Do you want to find your iPhoto Library?

    Your photo library was not found. Do you want to find your iPhoto Library?
    Do you want to create or find?
    This is the message I get when I try to open iphoto.
    1. this is the first time since I've used iphoto that this has happened.
    2. I would like to know why.
    3. I am not sure which choice to make.
    4. recent changes involving photos would be deleting several photos....I used a program called Grand Perspective and began to delete photos from there
    5. although I'm interested in fixing this problem, I would like to learn more about 'libraries' and the way iphoto works. Previous to owning a Mac, I used Picasa with my pc and I don't remember it using as much space on my hard drive. iphoto has a large number of duplicated photos of which I've been unable to resolve easily and it is approx. 60 G of space. I would like to have access to my images (30,000) through external hard drives but not necessarily have them all on my mac. I believe that is what Picasa does. I'm using the new Picasa for Mac but want to continue to use iphoto as well.
    If I did not form this question well enough, please let me know how to clarify. I'm trying to remedy this while answering a million Why? why? Why? questions from my 4 year old!
    Thank you.
    iphoto 7.1.5

    I would like to learn more about 'libraries'
    Step one is to learn about iPhoto - it is not a photo viewer like Picasa - it is a photo manager and uses an SQL database - the content and structure of this database are critical (as with any database application) to the operation of iPhoto - any changes made to either the content or structure of the database using external programs including (especially) the finder can corrupt the database and cause you to lose data
    recent changes involving photos would be deleting several photos....I used a program called Grand Perspective and began to delete photos from there
    This is how you destroyed your iPhoto library and made it unusable
    As to space - the iPhoto database contains at a minimum a copy of the original photo (in the default and recommended operating environment) and a small thumbnail. When any modification to the photo is made a modified version is created so there might be three versions (no duplicates) of a photo within the iPhoto library - none of them are extraneous and none of them can be removed without corrupting the iPhoto library
    Once a photo is imported into iPhoto (assuming default settings which are strongly recommended) the original source photo outside of iPhoto can be archived, deleted or otherwise handles - iPhoto has no further need for it.
    The iPhoto library can be located on an external hard drive so long as that hard drive is always available when iPhoto is running
    In general it is not advised to run two different photo organizers against the same photos - so if you use both Picasa and iPhoto you are likely to create future problems (although Google claims it is possible - just remember that you can not successfully make any change of any sort to any photo with the iPhoto library using Picasa or any other program - if you only use Picasa to look at photos you may be ok - if you never make any mistakes
    As to your immediate problem - you have destroyed you iPhoto library by deleting files from it. If you want to use iPhoto you will have to start over - find the originals folder within the iPhoto library and launch iPhoto while depressing the option (alt) key and create a new library - import the photos from the originals folder into iPhoto and do not go inside the iPhoto library or modify the contents of the iPhoto library in the future.
    LN
    Message was edited by: LarryHN

  • What does it mean "Do you want to save your current game on a new Game Center account?"

    My daughter and I have been playing Hay Day.  She on the iPad with her own Game Center Account.  I on my iPhone, with my Game Center account.  Tonight I noticed that I can log her out and log in as me, so I can play on the big screen.  As soon as my wife saw this, she wanted to play too.  So... she created a Game Center account, logged me out, and logged into Game Center as her.  When we go the game, this message appears:
    "Do you want to save your current game on a new Game Center account?"
    What does this mean? 
    What should we choose to ensure she starts a new Hay Day game, not start where I was.  We did not get this message when we switched back and forth between my daughter an I.
    Thanks,
    Matt

    Thanks Larry.  I ended up at the genius bar at the local Apple store.  My home button had died which is why the phone was constantly going to Voice Control.  The phone was replaced.  Thanks for answering.  I checked out the link and ordinarily that would have done the trick.

  • How to disable "Are you sure you want to copy this file without its properties?"

    copying from NFTS to Fat32 I get a prompt
    "Are you sure you want to copy this file without its properties?"
    the answer (for me) is always yes
    is there a way to disable the prompt ?

    This may be caused by the presence of NTFS Alternate Data Stream which cannot be copied to FAT32.
    Either format destination as NTFS or use utility like 
    http://www.nirsoft.net/utils/alternate_data_streams.html
    to scan/delete the ADS before copy. From the link above, below are some examples of when an ADS might be created
    1. Favorites of Internet Explorer: When You add a Web site link into your 'Favorites', a .url file containing the url and description is created. However, if the Web site also have an icon (favicon), the icon is saved as alternate stream for the same url file.
    The stream name of the icon is :favicon:$DATA
    2. Downloaded files of Internet Explorer: When you download and save a file with Internet Explorer, it automatically add a zone information for the saved file. This zone information is used for identifying the file as downloaded file from the Internet. The
    stream name in this case is :Zone.Identifier:$DATA
    3. Summary information of files: When you right-click on a file in Explorer and go to the 'Summary' tab, you can add summary information for the file, like title, subject, author, and so on. This summary information is also saved into alternate stream. The
    stream name in this case is SummaryInformation:$DATA.
    In addition to the legitimate usage of alternate streams, this technique may also be used by Viruses/Trojans/Spywares for saving data and hiding it from the user.
    In the case of files downloaded from the internet you could also try the methods in the link below to remove the zone identifier
    http://www.howtogeek.com/70012/what-causes-the-file-downloaded-from-the-internet-warning-and-how-can-i-easily-remove-it/

  • I have the spinning ball on my desktop at start up. I want to get my files

    I have several macs, all kinds of external hard drives, tons of cables, etc.
    I just want to get my files(video, photos, etc.) off of the internal drive. What do I do?
    I have tried to hook up my macbook pro via firewire and restarting holding down the "t" key. Waited forever for the imac g5 to start and I gave up.
    Now what?
    I have a new HD I can install in the g5 but I want to get my files off the old drive.
    Thanks in advance!
    Frank

    Follow the instructions here Target Disk Mode. Let us know how you make out.

  • How do you change the I'd on the log in screen when you want to update your apps and the I'd  is wrong

    How do you change the I'd on the log in screen when you want to update your apps and the I'd  is wrong and the password is also wrong. HELP

    Go to Settings>Store>Apple ID. Tap on the ID and sign out. Then tap on "sign in" and sign in with the correct account.

  • Where has 'do you want to replace this file' gone when copying items in lion?

    Hello, can anyone tell me if I can still have the option when copying items from one folder to another to be asked ' do you want to replace this file' instead of only having the new options to: stop / keep both / or replace all?  thanks for your help.

    If you don't mind losing them, it's all right to do it.
    Maybe you just want to delete them instead?
    Or do you mean you want to replace the faulty one in your Projects folder with a correct one from your Applications folder?
    Is this the Application you're talking about moving?

  • Error in sharepoint 2010 designer while saving:"Content in the embedded form may be changed by the the server to remove unsafe content.Do you want to reload your page to see the results of the save? "

    Hi, 
    I am doing development  in sharepoint 2010 and facing this very weird problem.
    If I create a site page with the sharepoint look and feel for that site and try to save the site page,i am getting this error:**"Content in the embedded form may be changed by the the server to remove unsafe content.Do you want to reload your page to see
    the results of the save? "** and when i say reload,the server removes some parts of my page, e.g onclick event of html,asp buttons.
    This error just comes for any sharepoint site page,e.g i took a copy of 'How To Read Library' page just edited the text part of taht page,and when i try to save this error again comes up.
    However,if i create a simple aspx page with only htmltags like head body,then thr is no problem ,everything works great. But sharepoint look and feel pages are giving troubles while saving.
    has anybody seen this earlier,what could be the reason for this?
    Thanks

    I think the excerpt and link below is the why, but the page talks about server code and not javascript.  I guessing that this is why blank pages work, but not wiki pages.  Can anyone verify this?
    The following are general rules for using server-side code on a site page.
    If the page is uncustomized, server-side code is supported on the page.
    If the page is customized, server-side code does not run, and the page does not render. This includes the code-behind for the page itself.
    http://msdn.microsoft.com/en-us/library/office/aa979592(v=office.14).aspx

  • In mountain lion calendar, the alerts on give you a "close" or "snooze" options.  What happen to being able to select how long you wanted to snooze your alert?

    n mountain lion calendar, the alerts on give you a "close" or "snooze" options.  What happen to being able to select how long you wanted to snooze your alert?

    SnoozeMaster is now avaiable from the Mac App Store, for MacOS X 10.8 and up.
    https://itunes.apple.com/us/app/snoozemaster/id614955483?mt=12
    It addresses this exact issue. You'll be able to configure different pre-set snooze times, enter custom snooze times when an alarm triggers, etc. It's what snoozing should've been from the get go.
    More information:
    http://on-core.com/snoozemaster/

  • Do you want to turn on file vault

    do you want to turn on file vault

    Only if you need it due to security/confidentiality requirements. What it does is encrypt with a strong cipher the contents of your drive. If anything alters inadvertenly the contents or if you forget the password, you will be SOL and LOSE all your stuff.

Maybe you are looking for

  • Replaced Hard Drive and Trying to Bring in Purchased Items from iPod

    The MacGenius I talked to yesterday said that I could do this, and made it sound like it would be automatic, but I have found (with the replacement of my hard drive) that sometimes these guys forget to mention a step. Right now, when I sync my iPod,

  • Content server error in content check-in - URGENT

    Unable to do filter 'collections.CollectionValidateCheckinData' for type 'postValidateCheckinData'. Unable to instantiate java class code for 'collections.CollectionValidateCheckinData' at location 'collections.CollectionValidateCheckinData' with def

  • Float class to represent an amount of money is not useful

    Hy, I am using the class Float to represent an amount of money in euros. So for example i do this: Float numero = new Float("320000.45") but if print out this number it is 320000.*44* and not 320000.*45*. Is there a class for representing amounts of

  • Installation Adobe Document Services

    Hi all, I have a WebAS 6.40 SP14 on my local machine and wanted to test Adobe Interactive Forms. So I followed the steps Achim Hauck provided in his blog (/people/achim.hauck/blog/2005/02/04/my-struggles-with-the-adobe-document-services-in-was640). I

  • Converting files to import into iMovie HD

    I've been searching the forum but cant find anything that helps me... I have an mpeg (a .m2p file) I've tried converting it into all sorts of things to import into iMovie, using the likes of "ffmpegx" and "mpeg streamclip". I've tried converting to m