SO10 - Add Fields in the Standard PAMA Text

Dear All,
Scenario:
When an Employee is hired a mail is sent to the Manager with the new employee details.
I have maintained a dynamic action for the same and the std text to be sent is maintained under the PAMA (Text ID) in SO10.
Query :
The text which is sent to the manger should consists of the following fileds :
1.) Per Number (P0000 - PERNR)
2.) Joining Date (P0000 - BEGDA)
3.) Per Area (PSPAR - WERKS)
4.) Position (PSPAR - PLANS)
Can any any one pls help me, how to insert these fields into the Standard Text.
Thanks in Advance
Regards,
Abhishek

Hi Revathi,
Thanks a lot for your reply.
I have already seen the SAP Std text which you have mentioned i.e, "MAIL_FOR_I0001_A"
But when you see that message all the varibales like (&P0001-PERNR&, &P0001-ENAME&, etc etc) are not in the normal font they are highlighted, and when i write a code with respect to my requirements it is not highligted and the message is shown without the field values in the mail.
My Question was how to insert those variables into the template.
I hope you can now easily answer my question.
Regards,
Abhishek

Similar Messages

Add fields to the standard report QM15

i want to add fields to the standard report.
t.code QM15 which display the list of items: selection of notifications.
the fields i want to add are:
1. batch no
2. Sample no
3. Main vendor
please let me know how can i do this. if any one can help me with screenshot doc. this is really helpful.
Thanks

Hi experts,
I have done with the z** creation of the standard report. I also create the z*include for the standard includes which are in the standard program. But I not able to find the fieldcatlog or include where I can add my new fields.
But I tried with one structure tht is standard structure in tht standard report so i make it as z*structure and I append my new fields to this structure. I debug the report and this works fine and also shows output, but at output when I change the layout to see these new fields it shows dump.
Then I tried with one more thing to give the positioning to my new added fields. (This is what u can say column positioning ).
When I execute this,it goes to dump screen.
Now I don't what to do with this.
If any one like to see the code. Plz let me know I will post the code.
Or if any one have any document on this plz share. Or any other solution.
Thanks in advance.
Thanks
Sachin

Need to add field in the standard screen

Hi
As per my requirementn we have to add one field in the Material master(MM01/MM02). Mentioned path below.
MM01/MM02)--> MRP1 tab --> in the MRP areas > click on MRP AREAS button>Pop will come with MRP AREA --> double cleck on entry > MRP area screen will appear> In general data tab> MRP group field is availble> Beside that i have to add one field.
Program Name--> SAPLMD_MGD1
Screen --> 0030
As it is separate pop kind screen not sure whether we can add or not. Please let me know if there is any chance to add the field with procedure.
Regards
Raj.

hi
For this you have to find the screen EXITS.
GOTO MM01->click on SYSTEM->then STATUS mow click on the program and find our the package name.
NOW GOTO -> se84 ->click on ENHANCEMENT-> give the package name here and EXECUTE you find all the EXITs.
hope this helps
Regards
Ritesh

Add the field in the standard purchase order

Hi
I have the requirement like this
I want to add two extra field in the standard purchase order (Tcode me2n) and display the data.What are the process for that.
Thanks
Mrutyunjaya Tripathy

hi,
u have to use user exits for adding additional fields for ME2N....some of the exits available for this transaction are..
MM06E001            User exits for EDI inbound and outbound purchasing documents
MM06E003            Number range and document number
MM06E004            Control import data screens in purchase order
MM06E005            Customer fields in purchasing document
MM06E007            Change document for requisitions upon conversion into PO
MM06E008            Monitoring of contr. target value in case of release orders
MM06E009            Relevant texts for "Texts exist" indicator
MM06E010            Field selection for vendor address
reward if useful

Addition of new fields in the standard report QM15

Dear Experts,
i need to add new fields to the standard report t.code QM15 which display the list of items: selection of notifications.
the fields i want to add are:
1. batch no
2. Sample no
3. Main vendor
4. text for CDR
plz let me know how can i do this. if any one can help me with screenshoot doc. this is really helpfull.
Thanks
Sachin
Moderator message: "spec dumping", please work yourself first on your requirement.
Edited by: Thomas Zloch on Sep 28, 2011 9:45 AM

Hi,
Have you added the selection text for the field ? also check the activation status.
Regards
Bikas

Reg:How to add fields to the scripts in detail

How to add fields to the scripts in detail.
Plz give me one example help me out.

Hi
add fields to the scripts by sending that field between two &s.
for example if u want to add lifnr of lfa1 table then pass field like this.
&wa_lfa1-lifnr&.here wa_lfa1 is work area for internal table it_lfa1.
if name1 then &wa_lfa1-name1&
in this way you can add fields to the script under any window.
i am sending one example program for scripts.
&--structure declaration--
TYPES:BEGIN OF ST_LFA1,
      LIFNR TYPE LFA1-LIFNR,
      NAME1 TYPE LFA1-NAME1,
      LAND1 TYPE LFA1-LAND1,
      ORT01 TYPE ORT01,
      REGIO TYPE REGIO,
      END OF ST_LFA1.
TYPES:BEGIN OF ST_EKKO,
      EBELN TYPE EKKO-EBELN,
      BUKRS TYPE EKKO-BUKRS,
      AEDAT TYPE EKKO-AEDAT,
      ERNAM TYPE EKKO-ERNAM,
      BSTYP TYPE EKKO-BSTYP,
      LIFNR TYPE EKKO-LIFNR,
      END OF ST_EKKO.
TYPES:BEGIN OF ST_EKPO,
      EBELN TYPE EKPO-EBELN,
      EBELP TYPE EKPO-EBELP,
      LOEKZ TYPE EKPO-LOEKZ,
      AEDAT TYPE EKPO-AEDAT,
      MATNR TYPE EKPO-MATNR,
      NETWR TYPE EKPO-NETWR,
      END OF ST_EKPO.
&--internal table,work area declaration--
DATA:WA_LFA1 TYPE ST_LFA1,
     IT_LFA1 TYPE STANDARD TABLE OF ST_LFA1,
     WA_EKKO TYPE ST_EKKO,
     IT_EKKO TYPE STANDARD TABLE OF ST_EKKO,
     WA_EKPO TYPE ST_EKPO,
     IT_EKPO TYPE STANDARD TABLE OF ST_EKPO.
&--data declaration--
DATA:TOTAL TYPE EKPO-NETWR,
      V_EBELN TYPE EKKO-EBELN.
data: v_item(20) type c.
&--parameter for purchase document number--
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS P_PURDOC LIKE V_EBELN.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA_FROM_EKKO.
PERFORM GET_DATA_FROM_LFA1.
PERFORM GET_DATA_FROM_EKPO.
&--grand total--
LOOP AT IT_EKPO INTO WA_EKPO.
    TOTAL = TOTAL + WA_EKPO-NETWR.
    CLEAR WA_EKPO.
ENDLOOP.
&--open form--
CALL FUNCTION 'OPEN_FORM'
   EXPORTING
    DEVICE                            = 'PRINTER'
    FORM                              = 'Z_50886_VENDOR'
    LANGUAGE                          = SY-LANGU
   EXCEPTIONS
     CANCELED                          = 1
     DEVICE                            = 2
     FORM                              = 3
     OPTIONS                           = 4
     UNCLOSED                          = 5
     MAIL_OPTIONS                      = 6
     ARCHIVE_ERROR                     = 7
     INVALID_FAX_NUMBER                = 8
     MORE_PARAMS_NEEDED_IN_BATCH       = 9
     SPOOL_ERROR                       = 10
     CODEPAGE                          = 11
     OTHERS                            = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for header details--
READ TABLE IT_EKKO INTO WA_EKKO INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'HEAD'
     WINDOW                         = 'HEADER'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for item details--
LOOP AT IT_EKPO INTO WA_EKPO.
concatenate wa_ekko-ebeln wa_ekpo-ebelp into v_item.
    CALL FUNCTION 'WRITE_FORM'
     EXPORTING
       ELEMENT                        = 'ITEM'
       WINDOW                         = 'MAIN'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDLOOP.
&--write form for vendor details--
READ TABLE IT_LFA1 INTO WA_LFA1 INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'VENDOR'
     WINDOW                         = 'ADDRESS'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for grand total--
CALL FUNCTION 'WRITE_FORM'
EXPORTING
    WINDOW                         = 'TOTAL'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--close form--
CALL FUNCTION 'CLOSE_FORM'
   EXCEPTIONS
     UNOPENED                       = 1
     BAD_PAGEFORMAT_FOR_PRINT       = 2
     SEND_ERROR                     = 3
     SPOOL_ERROR                    = 4
     CODEPAGE                       = 5
     OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form get_data_from_ekko
FORM GET_DATA_FROM_EKKO .
SELECT EBELN
         BUKRS
         AEDAT
         ERNAM
         BSTYP
         LIFNR
      FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = P_PURDOC.
ENDFORM.                    " get_data_from_ekko
*&      Form get_data_from_lfa1
FORM GET_DATA_FROM_LFA1 .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT LIFNR
           NAME1
           LAND1
           ORT01
           REGIO
           FROM LFA1 INTO TABLE IT_LFA1 FOR ALL ENTRIES IN IT_EKKO WHERE
                LIFNR = IT_EKKO-LIFNR.
ENDIF.
ENDFORM.                    " get_data_from_lfa1
*&      Form get_data_from_ekpo
FORM GET_DATA_FROM_EKPO .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT EBELN
           EBELP
           LOEKZ
           AEDAT
           MATNR
           NETWR
           FROM EKPO INTO TABLE IT_EKPO
           WHERE EBELN = P_PURDOC.
ENDIF.
ENDFORM.                    " get_data_from_ekpo

Adding field in the standard report

Hi ,
i have added the one field in the standard transaction VL06 , in the outboud deliveries report according to the Note 605460. I have to add the field in LIPOV structure.
after adding that field(include structure), in output i am not getting that added field.
please help me .
regards,
ajay reddy

>
Ajay reddy wrote:
> hI,
>
> i got the one more note to display added field in the report . (Note : 128154)
>
> thanks for your tme
>
> regards,
> Ajay reddy
Hi Ajay,
I have the same problem. I have added the field in the field catalog and the field in the final internal table also.
But sometimes its displayed and sometime not.
Looking forward for some help here.
Varun

Adding fields to the standard Report

hi ,
could u plz tell me what r the guidelines we have to follow
while adding fields to the standard Report. (Ver ECC 6.0)
in QA32 Tcode, after executing it will generate a report there i hv to add it.
I could find structure of that main final table, i hv appended desired field also,
Now im looking into Enhancement spot for it, is there any method to do it.
Plz hv eye on it.
Regards
Vivek

Hi ,
this is the exact answer for your question.
Go to the inclide RQALVF14 in this there is a perform call_listviewer_f14, in this the output is displaying using REUSE_ALV_GRID_DISPLAY function module . before this do like this ..
modify the output table p_object_tab like this .
the output table is of structure QALS_D02 you can extend this by appending a structure with the custom fields and there is an enhancement ( i have checked it) in this routine call_listviewer_f14 in RQALVF14. Create an enhancement in this routine at the start of the routine and modify the output table using your custom code in it , then you wil get the data as well as fields into fieldcatalog,.
Regards,
Venkat Appikonda.

Adding fields to the standard datasource

Hi All,
The custmer wants to add some fields to the Material master. I have found that those fields are already there in the standard extractor but are not being mapped to any infoobject.Do I need to create new info objects to map them or will there be a standard info object for all the fields in the standard datasource?
Thanks a lot,
RPK.

Hi CP,
Thanks for your reply. The fields are available in datasource but are not mapped to any infoobjects in the Trans Structure. If I have to populate them in BW then I need to map them to some info objects. I am clear upto this. Now my doubt is...since the standard datasource already contains these extra fields which I need to add, will there be standard info objects already created for these fields or do I need to create some Z info objects to map them with? How can I check if there are some standard infoobjects for these fields.
Thanks,
RPK.

Appending fields to the standard table vbak

I have tried to add fields by the button APPEND Structure .
Well it opens up a screen for creating a structure but after fillin fields when i try to activate it it gives the foll warnings :
   Enhancement category for table missing
   Enhancement category for include or subtype missing
   Field ZWELCOME does not lie within customer namespace
Tell me hw do we add the fields successfully to the table at least and then if poss
also tell hw shall i add them to the standard transaction VA11 so that data can be entered thru this transaction itself .

Hi,
     Since these are not error and workings only. Will they effect your functionality??? You can still activate the table after appending in the same way you did.
While creating a custom table i also got the below wornings :
Enhancement category for table missing
Enhancement category for include or subtype missing
but i activated the table without solving the wornings and they are working fine. So i am not sure whether it is necessary to solve those .

How to add field to the header for FBL5N ALV report

Hi,
I need to add fields to the customer line item display ALV report(FBL5N) header part.Right now there are four fields in the header like customer, company code, name and city, after that I need to add first name last name and phone no. Can any one tell me where exactly I need to add and populate there fields to be appear in ALV output list.
Thanks in Advance
Swapna

Yes I have tried, I have place a break point in that perform but it does not stop. I think that is not the correct place to added and populate fields. That routine is for populate selection screen ranges single and multiple values and parameters only.
Thanks
Swapna

Questions on adding z fields to the standard extractor, Please reply !!!

We have 0material, 0customer in our daily process chains where we do full loads daily, now we need to make that delta loads so that we can reduce the time of the execution of the pc. I know that these extractors can be delta enables but the problem is we have a few z fields for these extractors, like 20 fields for 0material and 3 fields for 0customer and currently we are doing full loads for these 2 infobjects. I want to know if these can be delta enabled so that zfields will be delta enabled. I mean in short if we make these delta enabled, will the z fields will come along with the standard fields since we are adding the z fields to the standard tables. Do we need to handle the code separately or is their any complicated code written along with it in the CMOD or just adding the zfields will bring the delta to BI. Please provide some links or any information on this regard. Please let me know if you need any other information. Thanks in advance.

Hi Daniel,
Deltas would be extracted based on some specific fields such as timestamp, dates or some kind of numeric pointer.
In your case, lets say if you have some date field for eg. Changed on in your table on which delta would be picked up then that delta should also fetch up changes related with address.
If this address field is directly present into your main talbe then changes would be directly picked up without any need of logic because table containing changed on date <your delta relevant field> also contains this address field.
But if this address is coming up from some other table then some sort of logic should be written to populate the changes in address field with respect to that "changed on" date field.
Rgrds,
Nilima

Table for checking the appended fields in the standard extractor

Hello,
Please let me know the table name for checking the appended fields in the standard extractor.
Thanks in advance

Hello,
From Rsa6 , goto your extractor from there you may get the name of your strucutre
Go to DD03L and enter this name
And you get to see all the fields there..
waiting for your feedback.
Regards
Nitin Bhatia

Integration of the ztable fields to the standard componenet

Hi Experts,
As i am working with BOL with ztable fields, i am unable to integrate ztable fields to the standard web ui (BP_EMPL) or standard compenent.
can anybody advise me.
rgds.
snd.

Hi Experts,
See my intention is here - i have ztable, and i maintained BOL entity via SM30 Tcode, it is working fine,
but question is - i am not find the BOL entity which i created when i try to integrate it to the view for WebUI requirements,
so can anybody advise, your advise is great help to me.
rgds.
snd.

In my group text one of my friends texts is pink while everyone else has the standard black text. Why is this?

in my group text my friend has pink text while everyone else has the standard black text. why is this?

Hi,
You can change it in several ways.
In Messages > Preferences > Viewing you can change your outgoing background (Balloon) colour, which then gives you access to change the Font and it's text colour.
This works Mac to Mac in Messages using any service (iMessages, AIM, Jabber, Bonjour and yahoo).
iMessages users on iOS devices will not see it as it does not do coloured Balloons (the App only colours your outgoing ones to tell you if it is SMS or iMessages but does not send the colour)
You can also change individual IMs or iMessages by using the Format menu (Show Font and Show Colours)
And as Eric says there is the Keyboard/Contextual Menu method.
As lots of yours are "white" I presume this is iMessages on several iPhones and one computer.
iChat (the forerunner to Messages used to attribute random colours to incoming IMs in a group chat so they (people) looked different.
This can't be done in Messages 7 and 8
9:11 pm Sunday; June 15, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

SO10 - Add Fields in the Standard PAMA Text

Similar Messages

Maybe you are looking for