SOA 10g: Cluster set up-Help is appreciated

All,
version: 10.1.3.4
I'm trying to set up vertical cluster in my WIN 2008 dev env. This is my understanding, pls correct if im wrong
1. two nodes to be created (i.e two oracle_home (ex: Oracle_AS1 and Oracle_AS2) in the same box (ex: orafusmachine)
2. each node will have 1 oc4j instance.
3. make the two nodes into cluster by modifying the opmn.xml of each nodes(ex: <nodes list="orafusmachine.com:6200,orafusmachine.com:6201"/>)
4.set the ant orabpel property to 'true'
5. If I deploy my BPEL to any one of the node, I should be able to see the deployment happen to both the nodes.
In this set up, I don't want to set up external load balancer. In this case, how do i achieve the cluster?
thanks
sen

flora65
If you have just purchased and downloaded Premiere Elements 12, I suspect that you did not purchase it direct from Adobe since Adobe is no longer selling Premiere Elements 12.
If you were purchasing from Adobe direct, I would have expected a Adobe Premiere Elements 12 Folder on your desktop. In that folder would be a PRE12 Folder and a ReadMe Folder.
You would open the PRE12 Folder and use the setup.exe file inside it to start the Premiere Elements 12 installation. In that scenario, the computer 32 or 64 bit matter would be behind the scenes as it were.
I am assuming that you have Windows 8 64 bit computer. In that case, open the PRE 64 Folder, find the setup.exe inside, and double click the setup.exe to start the installation. Important. Have you received a purchased serial number for Premiere Elements 12 from the seller? If not, do not bother continuing with the installation until you get the purchased serial number.
Best do these downloads and installs with the antivirus and firewall(s) of your computer disabled.
Please let us know if you have any questions or need clarification.
Thank you.
ATR

Similar Messages

  • Extending SOA 10g cluster

    We have 2 node cluster on SOA 10g, 10.1.3.5.
    Can this be extended to 3 node cluster? So is it possible to "add" a node to the cluster? Please point me to the right content describing how this can be done.
    Server OS is RHEL 5.0.
    regards,
    Anand

    You can see in the log it is a Timeout exception.
    Please do the following:
    1. Shutdown Oracle Application Server
    2. Set value of maxSyncWaitTime property in $OH/bpel/domains/<domain-name>/config/domain.xml files according to the time
    any BPEL process deployed in the doman can wait for response from synchronous process. This value depends on kinds of
    synchronous processes participating in the BPEL process.
    3. Set values of all transaction-timeout properties in $OH/j2ee/oc4j_soa/application-deployments/orabple/ejb-ob-engine/orion-ejb-jar.xml
    file, so, it would be larger than maxSyncWaitTime defined in previous action. It defines the maximum length of any transaction for
    BPEL session bean.
    4. Set value of Global Transaction Timeout property - transaction-timeout in $OH/j2ee/home/config/transaction-manager.xml file.
    This transaction-timeout property defines transaction timeout for any iAS transaction including Database one and its value should
    be larger, than any transaction-timeout defined in previous action.
    5. Start Oracle Application Server
    Arik

  • Concurrent behavior of DB adapter on SOA 10g Cluster

    Hi all,
    We have currently setup SOA 10g(10.1.3.5.2) cluster.According to Oracle documentation other than File/FTP adapters all other adapters behave concurrently i.e; we can have these adapters in active-active topology in the cluster.
    Now we have a built a sample ESB project with inbound DB adapter and two routing rules.One invoking a BPEL process and another creating a File.
    We have the DB adapter in active-active mode.Now at runtime when we insert some record into a table polled by the above DB adapter, we find that duplicate BPEL instances are created and duplicate files get created(on both application hosts).
    However if I change the active-active topology of the adapter into active-passive topology by inserting clusterGroupId property on endpoint of the adapter then only a single BPEL instance and single File is created.
    Please let us know how we can achieve the above with active-active mode of the adapters.
    Thnks & Rgds,
    Mandrita

    Hi Anuj,
    Thanks for your response. However when we enabling distributed polling then we find that the behavior is not consistent.
    I am explaining the inconsistency below-
    When ESB_DT with service-weight=100 is up then ESB to BPEL invocation(SOAP) creates duplicate BPEL instances but when I shutdown that ESB_DT and the other ESB_DT with service-weight = 50 goes up then we find that duplicate BPEL instances are not getting created.
    So is this a default behavior i.e; active-active topology behavior is not consistent?
    Thnks & Rgds,
    Mandrita

  • How use CAVS in Oracle SOA 10g ? Any guide / help ?

    Hello,
    I need to implement CAVS for testing. Any best material that help me to Test my Service.
    Thanks

    Some of the good articles which will be helpful for CAVS testing:
    http://download.oracle.com/docs/cd/E17904_01/doc.1111/e17366/chapter.htm
    http://biemond.blogspot.com/2011/03/test-your-services-with-aia-cavs.html

  • Setting up new iphone from a back up and it's trying to sync all apps, this is going over memory capacity.  it's also not bring over any of the music that i had on my old phone, any help greatly appreciated. thanks

    hi,
    i'm setting up new iphone from a back up and it's trying to sync all apps, this is going over memory capacity.  it's also not bring over any of the music that i had on my old phone, any help greatly appreciated. thanks

    Geesh - all this information and no  one has any clue to this? Not even someone from Apple?
    Can someone at least point me in the right direction?

  • My friend changed the language in my apple setting and took english off... i can no longer inputmy password due to it having an accent. What should i do and how should i do it ? all help is appreciated

    My friend changed the language on my phone.... i can no longer input my password due to him taking of the english language,  it is currently in the chinese language and my password has accents in it so i cant access my phone, i dont mind re-storing my phone if required... \whatshout i do and how do i do it ? help is appreciated !

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • Need help setting up airport express as bridge (Any help is appreciated)

    Hello so before my wifi was switched I was able to use my 802.11g airport express as a wifi card for the xbox 360. I then decided to upgrade my main base station from an 802.11g base station to and airport extreme 802.11n. My problem is that my airport express cant extend the airport extreme network to my xbox anymore because they are different 802.11 versions. So can anyone help me configure this so I can get this back? Any help is appreciated.
    My Current Setup:
    Internet => Airport Extreme 802.11n => Wireless => Airport Express 802.11g (to extend network for xbox)=> Ethernet => Xbox 360
    Thanks!

    As I said, WDS is a nightmare for most users. Apple hides the settings from users to discourage use of WDS.
    I do not recommend that you do this, but have a feeling that you will do this anyway.
    I will not be able to help you sort out WDS problems.
    On AirPort Utility 5.6, click Manual Setup
    Click the Wireless tab below the icons
    Hold down the option key on your Mac while you click on the Wireless Mode selection box and the WDS settings will appear
    Apple's instructions for WDS are here:
    http://support.apple.com/kb/HT4262
    Hope this helps. Good luck.

  • Help ..req ..for SOA 10g Monotoring tools...

    Hi,
    i need some pointers or docs...for the list of available SOA 10g Monotoring tools...and there relative usage
    Thanks in advance ,,

    Hi Rams,
    You can monitor Oracle SOA Suite 10g components by using Oracle Application Server Control, Oracle BPEL Control, Oracle ESB Control, and Oracle Web Services Manager Control. Refer docs to know more -
    http://download.oracle.com/docs/cd/B31017_01/index.htm
    Regards,
    Anuj

  • SOA 10g JMS adapter does not pick up large messages in Oracle AQ

    I am using SOA 10g 10.1.3.4 MLR #9. When I enqueue a large JMS message ( of type SYS.AQ$_JMS_TEXT_MESSAGE ) into the AQ from SOA 11g it goes into the TEXT_LOB portion of the USER_DATA column in AQ. In addition to this GROUPID and GROUPSEQ do not seem to get set. When that happens, my JMS adapterfrom SOA 10g does not seem to dequeue the message. But if I enqueue the same message using sql and set the GROUPID and GROUPSEQ my JMS adapter from 10g picks up the clob message.
    How do we make the 10g adapter always pick up the large message in TEXT_LOB? I don't have this problem when the message is small because it goes into TEXT_VC field instead of TEXT_LOB field.

    We are having this problem and have not figured it out yet. We need help. An oracle SR is opened but no progress from Oracle yet. I need to get some traction on this so anyone's help is appreciated. Our suspicion is that the AQ client in the wls 10.3.1 is incorrectly choosing to put the xml payload in TEXT_LOB even though the character size is less than 4000.
    Here is a summary of our observations....
    Today we did some testing with our old 6.3.1 OSM environment and our new 7.0.2 environment. We tested each against our QA1 environment and then our QA2 environment. Scenrio 1 is our problem. Scenario 2,3,and 4 all behave similar to each other. Why does Scenario 1 behave differently. It is causing AIA a problem when it dequeues the message.
    Scenario 1:
    We pointed our 7.0.2 OSM/Weblogic 10.3.1/Out of the Box AQ (which is part of our QA1 environment) to send messages to the AIA AQ table in our QA1 environment. The AIA database uses ALT32UTF8 character set. We don't know what character set the 7.0.2 OSM/Weblogic/AQ uses. Wehn we sent messages to the AIA QA1 table we saw that everything under TEXT_LEN 1000 went to TEXT_VC, Over 1000 went to TEXT_LOB. This is causes AIA to throw an exception if the message is over 1000 when it dequeus the message, because it thinks it shoudl look in the TEXT_VC which is null for AIA.
    Scenario 2:
    We pointed our 7.0.2 OSM/Weblogic 10.3.1/Out of the box AQ (which is part of our QA1 environment) to send messages to the AIA AQ table in our QA2 enviornment. The AIA database uses UTF8 character set. We don't know what character set the 7.0.2 OSM/Weblogic/AQ uses. When we sent messages to the AIA QA2 AQ table we saw that everything under TEXT_LEN 4000 went to TEXT_VC. Over 4000 went to TEXT_LOB. This is fine for us.
    Scenario 3:
    We pointed our 6.3.1 OSM/Weblogic 9.2.1/Custom AQ Solution (which is part of our QA2 environment) to send messages to the AIA AQ table in our QA2 environment. The AIA database uses UTF8 character set. We don't know what character set the 6.3.1 OSM/Weblogic/AQ uses. When we sent messages to the AIA QA2 AQ table we saw that everything under TEXT_LEN 4000 went to TEXT_VC. Over 4000 went to TEXT_LOB. This is fine for us.
    Scenario 4:
    We pointed our 6.3.1 OSM/Weblogic 9.2.1/Custom AQ Solution (which is part of our DEVINT1 environment) to send messages to the AIA AQ table in our QA1 enviornment. The AIA database uses ALT32UTF8 character set. We don't know what character set the 6.3.1 OSM/Weblogic/AQ uses. When we sent messages to the AIA QA1 AQ table we saw that everything under TEXT_LEN 4000 went to TEXT_VC. Over 4000 went to TEXT_LOB. This is fine for us.

  • I need to store a schema in mds in soa 10g.

    Hi Gurus,
    Kindly help out with the present situation.
    i need to store the schema which is used in different process in the mds in soa 10g. can any one provide some steps or docs related to setting up of mds in soa 10g?
    Help is greatly appreciated.
    Regards,
    Venky.

    As far as I know, there isn't any MDS in SOA 10g. This concept was introduced in 11g version.

  • File adapter polling frequency is not consistent in SOA 10g!

    Friends,
    I have used file adapter for polling files in a service in SOA 10G env. with polling frequency 3600 secs. However, i have noticed file polling is not happening at 60 mins interval, instead some times files getting polled in less than 30 mins but again after sometime its polling correctly in 60 mins interval. I am not sure what could be the reason but i need a solution urgently. Please help!

    Could be the managed servers in the cluster are not in sync.
    I faced DB JCA adapter sync issues because of Oracle soa suite bug.
    You could check whether any sync issues are there with File adapters.

  • Quartz Scheduler in Oracle SOA 10g clustered environment

    Hi,
    I was able to successfully test the usage of Quartz scheduler in our Oracle SOA 10g dev environment. Our dev is single instance where as our Test and Prod are clustered. I would like to know if the scheduler works in clustered environment. I wasn't able to find any documentation specific to Quartz for Bpel. If it can be done can you provide some guidance.
    I really appreciate your help
    Jagan.

    Jagan
    The schedulers do work on cluster environment. The trick is that every node has its oc4j containers, so you will need to deploy the scheduler process to every node in the cluster.
    Suppose you have two nodes, and have a requirement to run certain process every two hours. You schedule the process in DEV environment to run every two hours. But in cluster you will specify to run every four hours on both the nodes. In simple explanation, node 1 will fire the process at 0,4,8, ... hours and node 2 will fire at 2, 6, 10, ... hours. So, the result is that your process is still running every two hours.
    Hope this will help ...

  • WDS Set up - Help Needed! Airport Extreme with one Relay and one remote

    Hi Guys,
    I need a bit of help. I am feeling quite stupid and frustrated. I am having some difficulty with setting up a WDS network with:
    Base station: Airport extreme (current version)
    Relay: Airport Express (current version)
    Remote: Airport Express (current version)
    I start by cold resetting the three units. The Base station is connected via Ethernet. The setup I wish to get going is a simple base - relay - remote.
    I go through the utility manager and set up the base station, first as "create a wireless network" enter the ISP details etc etc. Its green light. Everything is fine. Then manually configure the Base Station. Hold down option key hit Participate in a WDS. I then select main enter + and add the Mac Id's for the intended Relay unit and Remote Unit (12 character and numeric string). At this stage I am only adding the intended Relay unit and Remote units MAC number.
    Question 1: Do I need to add the base unit's MAC number itself under: WDS Remotes? even I am setting it up as Main?
    I am careful to note the security settings and the the Wireless Network name to match these in the relay and remote set up. Under the Wireless tab I leave the Radio Mode: as Automatic (802.11a/n - 802.11b/g/n). I make sure the base has "allow this network to be extended" ticked. Under Radio Channel selection I edit it to reference channel 1 for 2.4Ghz (5 Ghz leave as Auto). I am careful when setting up the Relay and remote to match the Radio Channel. (Although I tired many channels as I thought maybe interference was a factor and denying the fact its obviously my set up skills as a factor).
    Question 2: Do you need to disable Guest networks? I would think it does not matter as I have tired turning it off and has not made any difference.
    Under Access Control I leave as default, Not enabled.
    Next I hit update and and error message comes up. WDS Error as it can not find other units. Ok fine as the relay and remote are not yet set up. So I ignore and can get to the stage where the base unit is working and green light with an internet connection.
    I then proceed to set up the Relay unit. Doing the same steps as above with a couple of differences being I add the MAC numbers and select the WDS Mode (Relay for Relay and Remote for Remote. I add the Main base station (i.e Airpot Extreme MAC No.) when prompted and then + the Remotes MAC number. The same for the Remote except I only need to add the base station's main no.
    Question 3. Do I need to add the Relay's own MAC number to its own setup? This seems doubtful as with the base station but tired with and without for good measure with no success.
    The 2.4Ghz channels are all set to 1. Radio mode set to Auto. Although even when I try to manually set them to all identical it doesn't seem t help.
    Then the problems begin. The base unit is Green and the Relay and Remote say they are not connected to the internet. I assume since I have not seen a WDS Error message then the units are set up correctly or as I ignored it on the base unit. But when click unignore the error seems to work itself out.
    Question 4. I need help to understand why I have no internet. The remote / relay says something about no IP number and I don't really understand what I should do? Do I need to go back the Airport Utility Manager and start messing about with the TCP/IP, DHCP, NAT ? The base is set up PPPoE and the relay and remote are set to Bridge.
    It is really puzzling me why the relay and remote flash amber with error messages related to the IP number? I have tried turning off the base station and router and then on again but no joy.
    Can anyone please enlighten me or give me a few ideas? I am doing something very obviously stupid and I guess the fix is something simple that I have overlooked.
    I did spend the time and go through the threads and search online, So I am not trying to waste anyone's time I referenced the two links to get a second opinion:
    http://broadcast.oreilly.com/2009/03/taming-an-airport-express-wds.html
    http://www.macobserver.com/tmo/article/settingup_an_airport_relay_with_airportexpress/
    Any help much appreciated!

    Versed wrote:
    I need a bit of help.
    Welcome to Apple's discussion groups.
    My WDS experience is limited to "main" and "remote" configurations (no "relay"), so I'm not posting from direct experience, but below is what I think would work in your case.
    I go through the utility manager and set up the base station, first as "create a wireless network" enter the ISP details etc etc. Its green light. Everything is fine. Then manually configure the Base Station. Hold down option key hit Participate in a WDS. I then select main enter + and add the Mac Id's for the intended Relay unit and Remote Unit
    I don't think the "main" unit needs to be told about the "remote" unit, only about the "relay" unit.
    Question 1: Do I need to add the base unit's MAC number itself under: WDS Remotes? even I am setting it up as Main?
    You'd never enter the MAC address of a unit into its own configuration, if that's what you mean. I also don't think that you'd need to enter the MAC address of the main into the remote and conversely.
    I am careful to note the security settings and the the Wireless Network name to match these in the relay and remote set up. Under the Wireless tab I leave the Radio Mode: as Automatic (802.11a/n - 802.11b/g/n).
    Five things have to match in a WDS configuration: network name, encryption type, network password, band, and channel.
    I make sure the base has "allow this network to be extended" ticked.
    I don't think that's important for a WDS configuration.
    Question 2: Do you need to disable Guest networks?
    I wouldn't think that matters.
    Under Access Control I leave as default, Not enabled.
    That's fine.
    WDS Error as it can not find other units. Ok fine as the relay and remote are not yet set up.
    Right.
    I then proceed to set up the Relay unit. Doing the same steps as above with a couple of differences being I add the MAC numbers and select the WDS Mode (Relay for Relay and Remote for Remote. I add the Main base station (i.e Airport Extreme MAC No.) when prompted and then + the Remotes MAC number. The same for the Remote except I only need to add the base station's main no.
    I think this should be the MAC address of the relay station, not that of the main station.
    Question 3. Do I need to add the Relay's own MAC number to its own setup?
    No.

  • I want my file adapter to poll multiple locations in soa 10g

    Hi All
    I had a requirement that "I want my file adapter to poll multiple locations in soa 10g".I came to know that in soa 11g it is possible.
    I want this to be done in soa 10g.
    plz help me.
    thanks,
    krishna

    You can have pick activity and have separate ftp adapter for each folder, but you will be using the same jndi in all pick activity.
    In that way you can have multiple ftp adapter but uses the same jndi by increasing the performance.
    User will be configured to a home location, example as below.
    say a ftp user "adminuser" is configured to a default folder c:/ftp_files
    You can create multiple folders under the same folder like below.
    c:/ftp_files/location_a
    location_b
    location_c
    location_d
    For each location have a separate ftp adatper, but all of them uses the same jndi while defining the path you have to change according to the above folder.
    Let me know how this goes.
    - It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
    Thanks,
    Vijay

  • AIA 3.0/11g installation on SOA 10g(10.1.3.4) - OAS

    Is it possible to install AIA 3.0/11g in the SOA 10g (10.1.3.4) edition, if yes please point me towards any installation guides....
    I understand 11g releases are more oriented towards weblogic, so i dont find the installation guides of 11g very useful.
    To be more precise, I tried installing AIA 11g, onto a SOA server(10.1.3.4),the problem was in the third step where "SOA Server Details" are given, I'm not able to connect to my SOA server.
    These r d values i gave
    Admin Host Name:mildh0155
    Admin Port:6003
    Domain Name:xxx(i thot this as the instance name,if im wrong pls correct as to which name has to be entered here incase of the OAS)
    Admin User:0c4jadmin
    Admin Password:xxxxxxx
    The "Managed Server" waits for a minute and then becomes "Cannot connect to Server"
    Pls help...Thanks in advance

    Hi Venkatesh,
    You can't install AIA 3.0 on SOA Suite 10g since AIA 3.0 leverages on same SCA based components which can't be deployed on SOA Suite 10g.The domain name that is expected while installing AIA 3.0 is weblogic server domain name which doesn't have an equivalent in Oracle Application server and the port is the weblogic admin server port not opmn request port.
    Hope this addresses your query.

Maybe you are looking for