SOA 11g + AIA 11g+ Patches

Hi All,
i want to know about all the patches required to integrate SOA 11g with AIA 11g...
and all the patch required for PIPs ...that is common among all
plz help me if any one knows about that..
Thanks,
Shruti

Hi Shruti,
For the successful installation of AIA 11g u need to apply the DSTv13 patch 9146268 on database to avoid the 'Time zone not found' issue while installing AIA 11g.
Metalink notes: 756454.1 and 975450.1 would be helpful.

Similar Messages

  • Installing AIA 11g on top of SOA Suite 11g

    I have installed SOA Suite 11g (11.1.1.5) as per Oracle Installation Guide. The installation is successful and SOA Suite 11g is working fine!
    Now I need to installa AIA 11g.
    1) Currently I have Oracle XE database. Do I need to uninstall it and install Oracle 11g DB?
    2) If yes, do I need to uninstall SOA Suite and install it again after DB installation?
    Please advise.
    Thanks

    Its always better to have Oracle 11g database, against XE database.
    You dont need to uninstall the SOA 11g, just make sure you have the Compatible Oracle 11g database version, create the RCU, then you have to point all the JNDI which is available in SOA 11g to new database.
    Check in metalink.oracle.com. You should get a note explaining, about how to change the RCU pointing.
    Thanks,
    Vijay

  • 11g SOA with AIA suddenly creates huge temp files(sar files)!!

    Hi All,
    One of our clients that is on 11g SOA with AIA, the team observed while deploying applications, that it suddenly creates huge temp files(sar files) and the server slows down and then shuts down, has anyone seen such behavior or possible reasons?
    If anyone could share such prior experience would be apreciated!
    Thanks for your time!
    Regards,

    Hi Ajay,
    Could you check the managed server logs on the server you are deploying to? I prefer the soa_server1.out file if its available. Hopefully there is something more telling on that side.
    My gut feeling is that there is a schema required by the ProcessFulfillmentOrderBillingBRMCommsAddSubProcess process has not been deployed (which sometimes happens with this PIP in particular).

  • AIA Demo for AIA 11g

    Hi,
    Is there a documentation that gives some details on how to perform AIA Demo installation on AIA 11g which is runing on a WLS 10.3.3 cluster ?
    I am trying to use GettingStarted_E17359-01.pdf available as a part Article ID 1087345.1, but that is of not of much help. I need to know if it works fine and how to test a SOA setup with OSB and AIA in it.
    Thanks

    You can find all details on the installation of the AIA Demo in the Install Guide (V20870-01). Essentially you only run a single script for deploying the entire demo including DB schema, middleware configuration, J2EE apps, and SOA composites. Read the install guide carefully, in particular make sure to assign enough heap space (2GB) to your managed server ahead of demo deployment.
    Note that the AIA Demo 11gR1 does not leverage OSB at this point. But you can certainly use the demo as a starting point and add OSB services to the flow. E.g. a natural use case for OSB would be to virtualize application endpoints. So you could build a wrapper service for demo application services like the StoreFront service (which is an ADF based web service) and refer to this new wrapper in the AIA code. This is just one example, I am sure you can find many other places where OSB would fit into the picture.
    Another note: you should go for SOA 11.1.1.3 if you intend to use OSB as this release provides the direct binding between SOA and OSB. In the case of running AIA 11g on SOA 11.1.1.3, don't miss to apply patch 9717829.
    Gerhard

  • Dynamic endpoints in SOA and OSB 11g

    Hi,
    In AIA we have aiaconfiguration properties.xml from where end points of wsdls will be accessible.
    This enables ease in migrations so that if endpoint changes it is only need to be changed in aiaconfiguration properties.xml.
    Can the same be acheived in SOA and OSB 11g projects?
    Thanks,
    Sowmya

    Hi Sowmya,
    Yes, it is very much possible in OSB 11g using customization (you may use it manually or programmitically). Please refer -
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15867/customization.htm#CACJCAGD
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15022/toc.htm
    Regards,
    Anuj

  • AIA 11g Erros with AIAB2BErrorHandlerInterface (1.0)

    We have installed AIA 11g. After the installation, some of the composites on EM are showing as not available or errored out .. e.g. On em, when we click on AIAB2BErrorHandlerInterface (1.0), it says "The composite AIAB2BErrorHandlerInterface (1.0) is not available. This could happen because either the composite has been undeployed or soa-infra has not yet loaded this composite. Unable to register service." .. We tried to redploy, but its erroring out again .. We have the same issue with other installed AIA componsites, i.e., AIAB2BInterface, ReloadProcess, AIASyncErrorHandlingBPELProcess ... the installation log has the following ..
    [deployComposite] setting user/password..., user=weblogic
    [deployComposite] Processing sar=/wdev/apwdev/AIA/Infrastructure/B2B/src/AIAB2BInterfaceApp/AIAB2BInterface/deploy/sca_AIAB2BInterface_rev1.0.jar
    [deployComposite] Adding sar file - /wdev/apwdev/AIA/Infrastructure/B2B/src/AIAB2BInterfaceApp/AIAB2BInterface/deploy/sca_AIAB2BInterface_rev1.0.jar
    [deployComposite] Creating HTTP connection to host:mdcapp41.na.ops.local, port:8010
    [deployComposite] Received HTTP response from the server, response code=200
    [deployComposite] ---->Deploying composite success.
    [echo] AIAServiceConfigurationProperties.xml does not exist in /wdev/apwdev/AIA/Infrastructure/B2B/src/AIAB2BInterfaceApp/AIAB2BInterface
    [echo] oracle.home = /oracle/wdev/apwdev/FMW/Oracle_SOA1/bin/..
    Is the culprint "AIAServiceConfigurationProperties.xml"?

    Hi,
    we edit the setDomainEnv and setSOADomainEnv and change USER_MEM_ARGS to the following entry:
    USER_MEM_ARGS="-Xms512m -Xmx2048m -Xss256k -XX:+UseParallelGC -XX:GCHeapFreeLimit=20 -XX:PermSize=128m -XX:MaxPermSize=512m -XX:NewSize=128m -XX:MaxNewSize=256m -XX:SurvivorRatio=5"
    We run AIA 11g on a small Linux system with 5,6 GB RAM and one with 12 GB RAM. We have no problems with composites or out of memory exception.
    Best regards from Karlsruhe
    Marcel

  • No BSR in AIA 11g?  only OER or OSR?

    Can you please help me understand what will be used as SOA repository in AIA 11g? If you don't have license for OER or OSR, you cannot have SOA repository in AIA 11g?
    Please help.
    Thanks.

    AIA heavily leverages SOA to achieve application integration. As such, we introduce large volume of SOA assets, including various types of services (of different architectural significance, such as EBS, EBF, ABCS, and etc.), objects, and etc. The visibility to these assets are achieved via SOA Repository. Here I'd like to make a specific differentiation between 'integration' and 'visibility'. These are two different value propositions / problem spaces achieved via two distinct oracle product lines.
    Out of box, AIA have pre-built integration with Oracle's SOA Repository (OER). It includes
    (1) solution pack: bundle of all pre-built AIA services and objects .For the 11gR1 AIA release (FP-only release), it contains the entire Enterprise Object Library definition
    (2) AIA extended harvester: allow users to harvest their custom-built, AIA-compliant SOA composites and etc.
    (3) Documented best-practices: while users may execute AIA harvester any time one chooses to, there are a number of key lifecycle milestones for which the harvesting shall be run and be conducive to the overall SOA development lifecycle. The AIA Dev. Guide outlines that. Further, AIA development topology and its uses of OER, and etc.
    While AIA provides contents and pre-built integration, the SOA visibility and ensuing benefits are among the main value propositions OER offers. To revamp these benefits, users are to license OER.
    On a different note, content publishing to OSR is achieved via OER in the 11g release.

  • Error occured during Configuring of SOA in Jdeveloper 11g TP4

    Hi,
    I am not able to configure SOA in jdeveloper 11g. I got the following error in the
    startsoa log file
    July 13, 2008 3:02:44 PM oracle.j2ee.xml.XMLMessages warningException
    WARNING: Exception Encountered
    Error in building SOA
    BUILD FAILED
    D:\Project\SOA\jdevstudio1111\install\bpel\build.xml:10: The following error occurred while executing this line:
    D:\Project\SOA\jdevstudio1111\install\bpel\soa-infra-config.xml:48: The following error occurred while executing this line:
    D:\Project\SOA\jdevstudio1111\install\bpel\soa-infra-config.xml:89: ***************************************************
    * Configuring SOA Infrastructure has FAILED.
    * If following log files exists, please check them for possible cause:
    * D:\Project\SOA\jdevinstance\system11.1.1.0.22.49.49\o.j2ee\embedded-oc4j\install\tmp\soa-infra-java.log
    * D:\Project\SOA\jdevinstance\system11.1.1.0.22.49.49\o.j2ee\embedded-oc4j\log\startsoa.log
    Total time: 1 minute 58 seconds
    Thanks in Advance
    With Regards
    Nishanth
    Message was edited by:
    Nishanth Sodum

    Dear Heidi,
    Thanks for the responding to me. I am not able to find any error in the log. I placed the log messages. please suggest me on this.
    soa-infra-java.log
    08/06/25 14:21:41 Notification ==>Application Deployer for wsm-pm STARTS.
    08/06/25 14:21:41 Notification ==>Undeploy previous deployment
    08/06/25 14:21:41 Notification ==>Initialize D:\Project\SOA\jdevinstance\system11.1.1.0.22.49.49\o.j2ee\embedded-oc4j\applications\wsm-pm.ear begins...
    08/06/25 14:21:41 Notification ==>Initialize D:\Project\SOA\jdevinstance\system11.1.1.0.22.49.49\o.j2ee\embedded-oc4j\applications\wsm-pm.ear ends...
    08/06/25 14:21:41 Notification ==>Starting application : wsm-pm
    08/06/25 14:21:41 Notification ==>Initializing ClassLoader(s)
    08/06/25 14:21:41 Notification ==>Initializing EJB container
    08/06/25 14:21:41 Notification ==>Loading connector(s)
    08/06/25 14:21:41 Notification ==>Starting up resource adapters
    08/06/25 14:21:41 Notification ==>Processing EJB module: wsm-pmserver.jar
    08/06/25 14:21:41 Notification ==>Compiling EJB generated code
    08/06/25 14:21:41 Notification ==>Committing ClassLoader(s)
    08/06/25 14:21:41 Notification ==>Initialize wsm-pmweb begins...
    08/06/25 14:21:41 Notification ==>Initialize wsm-pmweb ends...
    08/06/25 14:21:41 Notification ==>Started application : wsm-pm
    08/06/25 14:21:41 Notification ==>Binding web application(s) to site default-web-site begins...
    08/06/25 14:21:41 Notification ==>Binding web application(s) to site default-web-site ends...
    08/06/25 14:21:41 Notification ==>Application Deployer for wsm-pm COMPLETES. Operation time: 641 msecs
    Startsoa.log file
    Jul 15, 2008 10:29:55 AM oracle.j2ee.xml.XMLMessages warningException
    WARNING: Exception Encountered
    08/07/15 10:30:24 SEVERE: AbstractInfo.getAnnotation oracle.webservices.annotations.async.AsyncWebService cannot be found in the given classpath.
    08/07/15 10:30:24 SEVERE: AbstractInfo.getAnnotation oracle.webservices.annotations.async.AsyncWebService cannot be found in the given classpath.
    Jul 15, 2008 10:31:11 AM oracle.j2ee.util.AnnotatedLogger logWithThrowable
    WARNING: J2EE JNDI-00002
    Jul 15, 2008 10:31:11 AM oracle.j2ee.util.AnnotatedLogger log
    WARNING: No javax.jms.ConnectionFactory found at null
    Jul 15, 2008 10:31:17 AM oracle.j2ee.deployment.DeploymentMessages warningDuplicateServletMapping
    WARNING: There are multiple mappings for servlet name: WSRPServiceDescriptionService, but only the first one (/portlets/WSRPServiceDescriptionService) will be considered for webservice endpoint
    Jul 15, 2008 10:31:17 AM oracle.j2ee.deployment.DeploymentMessages warningDuplicateServletMapping
    WARNING: There are multiple mappings for servlet name: WSRP_v2_ServiceDescription_Service, but only the first one (/portlets/WSRP_v2_ServiceDescription_Service) will be considered for webservice endpoint
    Jul 15, 2008 10:31:17 AM oracle.j2ee.deployment.DeploymentMessages warningDuplicateServletMapping
    WARNING: There are multiple mappings for servlet name: WSRPServiceDescriptionService, but only the first one (/portlets/WSRPServiceDescriptionService) will be considered for webservice endpoint
    Jul 15, 2008 10:31:17 AM oracle.j2ee.deployment.DeploymentMessages warningDuplicateServletMapping
    WARNING: There are multiple mappings for servlet name: WSRP_v2_ServiceDescription_Service, but only the first one (/portlets/WSRP_v2_ServiceDescription_Service) will be considered for webservice endpoint
    [TopLink Info]: 2008.07.15 10:32:09.077--ServerSession(30990579)--TopLink, version: Oracle TopLink - 11g Technology Preview 4 (11.1.1.0.0) (Build 080422)
    [TopLink Info]: 2008.07.15 10:32:11.109--ServerSession(30990579)--userprefs login successful
    Jul 15, 2008 10:32:41 AM oracle.j2ee.xml.XMLMessages warningException
    WARNING: Exception Encountered
    Jul 15, 2008 10:32:41 AM oracle.j2ee.xml.XMLMessages warningException
    WARNING: Exception Encountered
    With Regards,
    Nishanth

  • Ebi:getConvertedDateWithTZ   XPATH function in AIA 11g?

    Hi all,
    There was an XPATH function available with PIP module to convert the datetime into a particular format.
    xmlns:ebi="http://www.oracle.com/XSL/Transform/java/oracle.apps.ebi.core.xpath.EBIXPathFunctions" ebi:getConvertedDateWithTZ .
    Can anybody point me which jar contains the 'oracle.apps.ebi.core.xpath.EBIXPathFunctions' class? Is this jar available with AIA 11g?
    Rgds.

    I understand your reply and we are already doing that.
    the osb installation is common across the domains .but i need these custom xpath function reflected only for my domain.
    so my query is "whether we can set/overwrite any -D property at server startup or any server/domain level settings rather than updating the installation path?"
    I am just trying to understand whether we can avoid conflicts with multiple domains sharing the same installation.

  • Does Oracle XE 10g or 11g  have supported patches/bug fixes

    Does Oracle XE 10g or 11g  have supported patches/bug fixes?

    XE isn't patch-able, unfortunately- eg. in the section ...Major Features Not Included at http://docs.oracle.com/cd/E17781_01/license.112/e18068/toc.htm#XELIC116 a "patch set" is one of the "not included" items
    One could install one of the full release editions, get it patched, and upgrade an XE instance with the patch-able edition, but access to patches requires a support agreement.

  • Configuring SOA in Jdeveloper 11g

    Hi,
    I am not able to configure SOA in jdeveloper 11g. I got the following error in the
    startsoa log file
    Jun 25, 2008 3:02:44 PM oracle.j2ee.xml.XMLMessages warningException
    WARNING: Exception Encountered
    Error in building SOA
    BUILD FAILED
    D:\Project\SOA\jdevstudio1111\install\bpel\build.xml:10: The following error occurred while executing this line:
    D:\Project\SOA\jdevstudio1111\install\bpel\soa-infra-config.xml:48: The following error occurred while executing this line:
    D:\Project\SOA\jdevstudio1111\install\bpel\soa-infra-config.xml:89: ***************************************************
    * Configuring SOA Infrastructure has FAILED.
    * If following log files exists, please check them for possible cause:
    * D:\Project\SOA\jdevinstance\system11.1.1.0.22.49.49\o.j2ee\embedded-oc4j\install\tmp\soa-infra-java.log
    * D:\Project\SOA\jdevinstance\system11.1.1.0.22.49.49\o.j2ee\embedded-oc4j\log\startsoa.log
    Total time: 1 minute 58 seconds

    User,
    Probably best to ask in the 11g forum...
    At any rate, in TP4, you need to download the documentation on how to do this from Metalink.
    John

  • Error in configuring SOA from jdev 11g TP4

    i get an error while configuring SOA from jdev 11g, error is in Test DB setting in first step. These are the details
    DB Connection String : localhost:1521:XE
    DB User Name: adrs_soainfra
    DB Password: welcome1
    error is “There was a problem in establishin a test connection to [localhost:1521:XE]. please review your Database settings and retry(oracle.jdbc.driver.T4CTTIoer processError
    SEVERE: Throwing SQLException: ORA-00942: table or view does not exist
    942
    DB is up and connected via SQLPLUS. All required env parameters are there i.e ORACLE_HOME, PATH, ORACLE_SID

    This error is due to the scripts not being run correctly. Read the instructions carefully and run them again. The first script is run as user "sys", the second one as your user you indicate in the parameters to the first script. Make sure you use the _all scripts.
    Heidi.

  • SOA Composite upgrade 11g to 12c pitfalls

    We have quite a few SOA Composites from 11g we need to 12c, are there any pitfalls we should be aware of?  We are going to test a few first but appreciate any words of wisdom. Thanks, Tom

    Thanks Vamseeg! I will make sure and use 12c JDeveloper to perform them. I appreciate you responding. Have a great day! Tom

  • AIA 11g - When will PIPs released?

    Hello,
    is there a roadmap when the pips for aia 11g will released?
    Regards,
    Marcel

    Last I heard will be release by Oct/Nov timeframe. Again it depends on the PIP you are looking far. Please check with your Oracle rep.
    Thanks.

  • AIA 11g installation

    Hello,
    Could you explain me the use of oracle service registry in AIA 11g ?
    Is it mandatory ? If not, how OSR is replaced in AIA11g ?
    Any help appreciated. Thanks in advance.
    -Rupesh
    http://orachat.com

    Hi,
    OSR is no more in use in AIA 11g.
    AIA Foundation pack comes up with two new features for registering the services & AIA components.
    1. Project Lifecycle Workbench(PLW)
    2. Oracle Enterprise Repository.(OER)
    AIA leverages harvesting the services in the above mentioned utilities. Harvesting the services in PLW & OER are done through ant scripts which comes along with Foundation pack.
    I hope this answers your question.
    Regards,
    Rahul

Maybe you are looking for