Soa Server crashed after importing a custom .ecs file into B2B

I created an ecs file out of a custom schema and loaded it in the document definition in B2B console. It was loaded successfully. I redeployed the agreement. After this the server crashed and is not starting up. I am unable to revert the changes. Can anyone please help?
Thanks
Anand

please contact Oracle Support.

Similar Messages

  • When iPhoto '11 crashes after importing photos and videos, they are gone. How can I retrieve them?

    iPhoto '11 randomly crashes after importing/editing/organizing photos and videos. When it does, photos and videos that I've been working on are gone. Pictures taken with iOS devices can be retrieved if they are still in Photo Stream, but videos are gone. Is there anyway I can retrieve photos and pictures that are not saved before iPhoto crashes? Also, is there anyway to prevent it from crashing? It seems iPhoto '11 is doing this since the day 1 I started using it. Thank you.

    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
    this should help with the crashes - it may or may not help with the missing videos
    LN

  • DI custom SQLs were missing after importing a good ATL file

    The customer had a strange issue recently - lots of custom SQL statements were missing when they imported a good ATL file into a brand new repository. This hasn't happened before. And they are sure that the DI repository versions are the same between the one it was exported and imported. I did some troubleshooting for them and found out:
    1) The custom SQLs are intact when I opened the ATL file in a text editor. And the ATL file can be imported without any issue into other repositories.
    2) Most custom SQLs are missing but not all. Some are imported OK.
    3) When I opened the SQL tranform for those with missing SQLs, the textbox area for the SQL statement was blank. This caused errors in validating the job.
    4) Sometimes the issue was resolved when the developer re-initialized the repository and imported the ATL again. But sometimes this strategy doesn't work - the SQL statements are still missing after the repository has been re-initialized a couple of times.
    The DI version is 11.5.3 on HPUX with repository version 11.5.1.5. The repository database is either Oracle 9i or 10g.
    Thanks,
    Larry

    The issue was resolved. The error occurred because of the database version mismatching. When the job was exported from the dev repository, datastores were excluded. The datastores in dev point to Oracle 9i sources. However, when datastores were recreated in test, some of them point to Oracle 10g sources (same database structure, just version upgrade). Therefore, when the job was exported from the test, although the datastores were still excluded, the version number "10g" were embeded in the SQL transform. This caused the SQL text to be excluded when importing ATL into the dev repository.
    The action taken is to 1) delete datastores with version 10g; 2) create one with version 9i; 3) then exported the job into a new ATL. The new ATL can be imported into the dev repository without any issue.
    Thanks,
    Larry

  • 7.1 EAS server crashing after using migration wizard

    We have 7.1 Essbase installed with EAS running on a Unix box and the Essbase server running on NT. If we use the migration wizard the EAS server crashes after the migration has run. Has anyone else experienced similar problems ?

    Problem solved. The .sec file was copied from a different server and the database storage settings referred to a drive letter that was not available on the 7.1 box. This caused the app to crash and brought down the EAS box as well. I guess I'm a bit surprised that this type of problem causes EAS to terminate as well, given that (most types) of database corruption don't cause 6.x Essbase servers to terminate.

  • I'm getting an error message after importing a table through Dreamweaver into a page developed in Muse.

    I'm getting a couple of messages after importing a table through Dreamweaver into a page developed in Muse. I have compared the code of the page with the table with the page before I inserted the table and cannot find anything missing. the web address is http://gourmetdreams.com/weekly-menu.html
    How can I clear this up?
    I also noticed that when I uploaded the file there was one error: "- error occurred - Access denied.  The file may not exist locally,  may be open in another program, or there could be a local permission problem."

    Thanks for your help! I imported the table into Muse, then exported the site as html and opened it in Dreamweaver. I should've tried that in the first place but gave up when I couldn't edit it in Muse. I didn't know you could edit the html right in Muse. Also, my styling and the images I was using weren't showing up in Muse but once I opened it in Dreamweaver, everything fell into place. AND I could edit it! My client needs to edit this page every week, so I needed to be sure she could do that. She doesn't use Muse but does use Dreamweaver. At this point, I think I'll leave it alone and not try to style it with inline css. Maybe when I get a little more time, I'll try it. I just don't want to mess things up now that the're working.

  • Receive message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)... "Error occurred while converting the file 'songname'.  The required folder cannot be found."  CD/DVD ROM is no longer recognized until restart.

    Consistently receive the following message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)...
    "Error occurred while converting the file 'songname'.  The required folder cannot be found." 
    CD/DVD ROM is no longer recognized until computer is restarted.

    I have the same problem.  I recently moved my music from a Vista PC to a new Laptop with an external CD drive. It will copy one song from the CD and it will show in the Music file and then I get the message ' Error importing a CD - Folder not found'.  I must unplug the CD drive and plug it back in.  I have seen no fix for this problem.

  • Can you still import a 3D photoshop file into After Effects to edit in 3D? (not getting the Live Photoshop 3D choice?)

    trying to import a 3d photoshop file into ae, but it is not coming through as a 3D file despite the hundreds of videos that I have watched on it. I am not getting the live photoshop 3d tick box as an option on import...help!!!

    No, these features have been removed since CS6.
    Mylenium

  • How do I import a SPSS .sav file into SQL 2008 r2 using SSIS

    Hi there,
    Like the title says, I'm trying to import an SPSS .SAV file into an SQL 2008 R2 database using SSIS.
    I've tried a few things, but i cant seem to get it to work properly. I'm hoping there's someone out there who could point me in the right direction.
    I've tried the following:
    Tried the IBM step by step manual (http://pic.dhe.ibm.com/infocenter/spssdc/v6r0m1/index.jsp?topic=%2Fcom.spss.ddl%2Faccess_odbc.htm)
    --Couldnt folow this guide because I didnt have the SPSS MR DM-2 OLE DB Provider.
    Tried installing the provider using (http://pic.dhe.ibm.com/infocenter/spssdc/v7r0m0/index.jsp?topic=%2Fcom.spss.ddl%2Fdts_troubleshooting.htm) as a guide to download the provider listed (www-03.ibm.com/software/products/nl/spss-data-model).
    --This didnt work, I still could not see the provider listed after install and rebooting the server.
    Tried to get the file as CSV (Company couldnt provide it in CSV or another format)
    The server is a Windows Server 2008 R2 Enterprise 64-bit, has the Data Collection Data Model installed on it with SQL Server 2008 R2.
    If anyone could point me in the right direction they could make my day!
    Thanks in advance!
    Ronny

    Hi Ronny,
    According to your description, you want to import a SPSS .sav file to SQL Server 2008 R2 database. If that is the case, we can achieve this requirement with SPSS or SQL query. For more details, please refer to the following methods:
    http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=93346
    http://ilovespss.blogspot.com/2007/10/migrating-data-from-spss-to-sql-server.html
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Can I import a 10g MDL file into a 9.2 repository?

    Good Morning/Afternoon/Evening
    I started with OWB10g and created a repository. After creating several modules I realized I had an Oracle 9.2 database in which to deploy the runtime stuff.
    I was unable to install the server side (AIX 5.2) binaries since I didn't have a 10g Universal Installer.
    I exported the 10g repository information to an MDL file.
    I dropped the 10g repository and created a 9.2 repository and also installed the 9.2 runtime components. All is cool so far.
    I then wanted to import the MDL file from the 10g repository into the 9.2 repository and its then I hit the snag.
    Is it possible to import a 10g MDL file into a 9.2 repository?
    I was hoping the format was a standaard CWM type that would be recognized by either version but it looks like I'm incorrect.
    Any other suggestions on how to get the 10g repository information into the 9.2 repository?
    I still have the 10g repository on another server so I am able to do other types (?) of exports or whatever.
    Many thanks for the help.
    Gary

    Gary,
    I am puzzled by the reason "I was unable to install the server side (AIX 5.2) binaries since I didn't have a 10g Universal Installer." OWB 10g comes with its own copy of 10g Universal Installer. I am not claiming to ever install on AIX myself, but can you list the errors you get, perhaps we can troubleshoot the underlying problem, rather than working around it.
    Not to dodge your question on exporting 10g MDL to 9.2. Even though this is an unsupported and untested scenario, because OWB 10g did not introduce any new objects, you can try editing the MDL as below. I don't see any risk in trying. Find the MDLRELEASE and RELEASE statements at the top (not the comments with #, they don't matter and change values back to 9.2, as in:
    MDLRELEASE=9.2
    RELEASE=9.2.0.2.0
    And becuase OWB 9.2 does not know what Database 10g is, if you have any Database locations in your MDL that are set to 10g, change them to 9.2 as in:
    [...]Oracle Database|9.2|[...]
    Nikolai Rochnik

  • I am trying to import BPM Project.zip file into Oracle enterpriserepository

    I am trying to import BPM Project.zip file into Oracle enterpriserepository from admin tab.
    I am getting the following exception. please help if any one know the solution.
    Performing import...
    Import Failed: Error [100]: An unknown server-side error occurred. Please record stack trace (if available) and contact technical support.
    com.flashline.exception.LoggableException: trouble parsing file in import bundle: SampleWScall/activityGuide.agdl
         at com.flashline.cmee.openapi.service.subsystem.impexp.XMLTranslator.decode(XMLTranslator.java:157)
         at com.flashline.cmee.openapi.service.subsystem.impexp.ImportJob.doJob(ImportJob.java:74)
         at com.flashline.cmee.openapi.service.subsystem.impexp.AbstractJob.perform(AbstractJob.java:75)
         at com.flashline.cmee.openapi.service.subsystem.impexp.JobThread.run(JobThread.java:41)
    Audit results stored in:
    C:\Users\AVINAS~1.YEL\AppData\Local\Temp\import-4705112223687937017.log
    Audit for [Import job.] created on [2012-09-24 11:53:59 IST].
    2012-09-24 11:53:59 IST - Adding Import job with ID=[50403] to job queue.
    Thanks in Advance.

    Hi
    Why are you trying to import BPM zip file are you trying to configure the out of the box workflows?
    They are something that need to be deployed from the process admin on BPM.
    There would be the .exp file you would need as its BPM 10g that you would need to use.

  • Import a 10g DMP file into a 9.2.0.5 instance

    Is it possible to import a 10g DMP file into a 9.2.0.5 instance? Thanks
    in advance for your thoughts.

    No, do NOT run the catexp.sql from 9i in your 10g db! That was only a valid method with Oracle 6/7 and Oracle 7/8!
    Just use the Oracle 9.2 version of exp to create the dumpfile from the 10g database. You can use SQL*Net to connect to the 10g db from your 9.2 server connecting like system/manager@tnsname. Then use 9.2 imp to import the dumpfile into your 9.2 db.
    If you have access to Metalink please refer to the following note for full details on compatibility between Oracle releases for exp/imp: 132904.1

  • Importing third party XML files into form-based publishing

    Hi,
    I want to import third party XML files into form-based publishing. My problem is that when I open the files, they are presented as normal XML files.
    The 'type' property is not set to "form-based publishing". That's the reason no form is linked to the XML file.
    Is there a way to change the value of this 'type' property? Then I can set it to "form-based publishing".
    Message was edited by: E. van der Palen

    Hi,
       You should take into account two things:
    1. XML Repository filter
    System Administration-System Configuration-KM-CM-Repository Filters-choose XML Forms Repository Filter
    edit it and add your repository.
    After that you have to restart it.
    2. Resource Type.
    You should modify cm_resourcetype property to set form-based publishing.
    You could edit this xml file using form builder and then set this parameter.
    Patricio.

  • How do I import Map Info Tab files into Spatial for a map of europe?

    How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
    So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
    The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
    When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
    This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
    I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
    Any Help welcome :|
    Tim

    Tim,
    MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
    Andy Greis
    CompuTech Inc.

  • Need help importing corel draw 10 files into adobe indesign with editing ability.

    I would like to know if anyone knows of a way to import corel draw 10 files into adobe indesign

    Can't edit.
    Best bet..and still a longshot depending on the layout, is to open in
    Illustrator and do the editing there.
    Bob

  • How to Import AVCHD 1080/60p Files into Final Cut Pro 7?

    How do I import AVCHD 1080 / 60p Files into Final Cut Pro 7? And if there is no direct way [I certainly haven't found one, but I'm no expert], what additional software would be used? I want to import the files from a Panasonic HDC-HS700 onto an Intel Mac laptop [Mac OSX 10.5.8]? Obviously I don't want to compress & compromise my footage.
    I’m sure a simple, straightforward series of steps would help many people with this issue.
    Thanks!

    Thanks for the response!
    I'm guessing you've found ClipWrap2 to be better than competing products [such as AVCHD Converter for Mac, Toast Titanium, or Voltaic].
    On to the next steps. Using Clipwrap2, would I leave the checkbox "Convert Audio to LPCM" selected or deselected [and what the heck is LPCM?]. In the pulldown menu would I choose "Rewrap (Don't alter video samples)" or do I save a step by choosing "Apple ProRes 422"?
    And finally, am I gaining anything by shooting 1080/60p on this Panasonic HD Camera other than a headache? [Some have suggested this is not a True 60p.]

Maybe you are looking for

  • Is there no more activity on weblogic.developer.interest.general?

    I cannot seem to see any activity on the weblogic.developer.interest.general (as well as some other interest newsgroups). Is there an alternative? Thanks. PS Sorry for posting this here, but there's activity here, and my posting on the other newsgrou

  • Disk Partition for Windows failing

    Hi Everyone, May you pls help me on the following (for iMAC OS X Version 10.5.8): Wanted to partition main disk into two one for MAC OS the other for Windows 7 Pro, however, I'm getting error message ' Filesystem verify or repair failed'. Tried to fi

  • Why does apple let you install the update if it's just going to fail?

    I got the 3GS maybe a month ago. I had issues running updates on my old iphone (the original) and used to have to go into apple's genius bar in order to do updates. I was sort of hoping that the updates would run fine on the 3GS, but 3.1.2 failed for

  • Iview for lotus integration

    Hi All, I have to integrate Lotus Sametime on Windows Server with EP. I have installed all the dll files on the server and also verify.pse. I have created a system and mapped the user id and passwd with it. I have also created a Lotus Transport. But

  • Unable to compile EJB client program

    Hi, I developed a simple client program to an entity bean and I am not able to compile. Following are the few lines picked up from the code: (all my ejb,home and remote classes are under "test" package) import test.*; import java.util.*; import javax