SOA Suite 11.1.1.3 installation - RCU question

Hi,
I installed SOA Suite 11.1.1.3 using the following steps:
1. Installed XE database
2. Created RCU - 11.1.1.2.1 using prefix "DEV"
3. Created RCU - 11.1.1.3 using prefix "DEV1"
3. Installed WLS 10.3.3 full install
4. Installed SOA Suite 11.1.1.2.0 in the middleware home created in Step 3
5. Upgraded SOA Suite from 11.1.1.2 to 11.1.1.3
My questions are:
1. Have I followed the correct steps? I did not receive any errors while installing.
2. Which RCU will be used by SOASuite 11.1.1.3? Schemas prefixed with "DEV" or schemas prefixed with "DEV1"? Is there a way I can check this information?
Thanks in advance.
Rgds,
Suhas.

Hi,
I successfully installed SOA Suite 11.1.1.3 too on windows 2003server
I first Installed oracle database11.2.0.2
then Created RCU - 11.1.1.2.1 using prefix "DEV",but no use the RCU 11.1.1.3
after Installed WLS 10.3.3 full install
Finally Installed SOA Suite 11.1.1.2.0 in the middleware home created in Step 3
and Upgraded SOA Suite from 11.1.1.2 to 11.1.1.3
so we hava the same steps.I run the em and console successful,and all the soa Components are run Operating normally!
and I found not any different between RCU 11.1.1.2.1 and RCU 11.1.1.3 on install soa suite.
I want to know you to Exchange our soa Experience!

Similar Messages

Soa suite 11.1.1.5 installation steps in linux 64 bit machine

Hi Everybody,
I am installing SOA suite as follows:
Redhat Linux Machine(64 bit):
jdk:jdk1.0.6_26(as root user)
rcu:as oracle user
weblogic :as oracle user
soa suite 11.1.1.5:as oracle user
Will it be problem for user?Because i have installed jdk as root user.
With Regards
Jyoti
Edited by: Jyoti on Aug 18, 2011 10:18 AM

Below the Retry button,
The above mentioned two prerequisites are not marked as tick(i think warning sign).But
Checking for glibc-devel-2.5-x86_64;Not found.Failed
Checking for glibc-devel-2.5-12-i386_64;Not found.Failed
Checking for libaio-devel-0.3.106;Not found.Failed
and many more failures.
So Overall result of this check is:Failed
Inside Kernel Parameters:
Checking for hardnofiles=4096;hardnofiles=1024.failed
Checking for hardnofiles=4096;hardnofiles=1024.failed
Check complete.The overall result of this check is:failed
Problem:The kernel parameters do not meet the requirements(see above).
Recommendation: Perform operating systems specific instructions to
With Regards
Jyoti

Relate to DehydrationStore in Oracle Soa suite 11g

Can you explain what are the steps required to configure dehydration store ?
In DB which contain the dehydration store informtion?

Hi,
Dehydration store is a part of the *<prefix>_SOAINFRA* schema. When you install the SOA Suite, as part of the installation process you will have to use RCU (Repository Creation Utility) to create various schemas needed for the SOA Suite components. Hence while run the RCU to create SOAINFRA schema which has tables for dehydration store. You do not need to create it separately.
Hope this clarifies your doubt.
Thanks,
Sanjay

Oracle SOA Suite (10.1.3.3.0) install as Windows service

Hi Guys,
This is a repost. Since the original thread was kinda hijacked, I think maybe I should start a new thread.
I was installing Oracle SOA Suite (10.1.3.3.0) on Windows Server 2003.
Original issue: by default installation, 10gAS cannot run as windows service.
Following MetaLink Note, I manually created OreacleMyHomeProcessManager service, after start this service, seems everything works fine now.
However, in original MetaLink Note it asked to create two services, another one is OracleMyHomeASControl - but the nmesrvc.exe file cannot be found anywhere in my installation, so I did not create it.
My questions are:
1. Do I really need to create the 2nd service?
2. Why the 10gAS works fine without this 2nd service?
3. Without 2nd service, any potential problems it may cause?
Thanks a lot in advance for reply!
WMC
null

Don't worry, you are good to go. I just posted my comments on the earlier thread:
Oracle SOA Suite (10.1.3.3.0) install question
Thanks
Shail

JMS Adapter eg :Queue2Topic not working in SOA Suite

Hi,
I have installed a SOA suite(prev) with basic mode installation and deployed the tutorial 123 .Queue2Topic. deployed successfully.
i am putting the message to the jms/demoqueue with following code successfully.(because no excpetion).
env.put(Context.SECURITY_PRINCIPAL, "oc4jadmin");
env.put(Context.SECURITY_CREDENTIALS, "oracle123");
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.evermind.server.rmi.RMIInitialContextFactory");
env.put(Context.PROVIDER_URL, "ormi://soaserver:12401");
InitialContext jndi = new InitialContext(env);
factory = (QueueConnectionFactory)jndi.lookup("jms/QueueConnectionFactory");
myQueue = (Queue)jndi.lookup("jms/demoQueue");
connection = factory.createQueueConnection();
connection.start();
session = connection.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
qsender = session.createSender(myQueue);
TextMessage message = session.createTextMessage();
message.setText (myMessage);
qsender.send(message);
System.out.println("After sending the message Id is:::"+message.getJMSMessageID());
qsender.close();
session.close();
Queue2Topic example has DestinationName="jms/demoQueue"
<jca:address adapterInstanceJndi="eis/MyJmsQueue2" />
Questions:
1. Why the BPEL process [Queue2Topic]is not getting trigured ?
2. How do i ensure the queue recived message successfully in (Application Server Control)em..
3. should i change the configuration property for username, password for the connection factory in the oc4j-ra.xml ?
at[OracleSOA\j2ee\home\application-deployments\default\JmsAdapter]
4. where the server writing logs and sop of java code?is writing same log file for BPEL, ESB, WSM, ASC .. or diffrent log files.
Thanks for all the replys and suggestions
Regards,
Bogi.

i have changed the password in oc4j-ra.xml, now the process listening on the demoqueue.
is all the bpel related logs writting in the following path or it's possible to route to some other path?
OracleSOAHOME\bpel\system\logs\

SOA Suite 11g TP3 + Update 1 on Vista

Hi,
A few weeks ago I installed SOA Suite 11g TP3 on a Vista pc and completed the SOAHello application.
On a recent 11g preview I did another tutorial for which it was advised to install TP3 + update 1. This time configuration of SOA Suite took 11 minutes instead of the usual 7 to 8 minutes. However, the message "Build successful" appeared. I created a composite containing BPEL, ran it and started the SOAConsole. The SOAConsole appeared, however the deployed application could not be found. Anyone had similar problems?
I recently installed SOA Suite 10g on Vista. There is a Metalink note (note 444112.1) providing some additional steps on installing SOA Suite 10g on Vista. When I perform these steps, mainly disabling IPv6, SOA Suite 11g TP3 + update 1 installs correctly and the application is visible in SOAConsole.
Regards, Ronald

Well in our case it was pretty reproducable. A colleague also installed and configured JDeveloper 11g TP3 (without update 1) on Vista. The composite deployed, ran and showed in the SOA Console without any problems. Same for me.
However, when I "upgraded" too update 1 (did this a couple of times), every time preconfiguration took too long but succeeded, deployment worked, but no composite was shown in the SOA Console. When I performed the configuration steps for installing SOA Suite 10g on Vista (see Metalink note), JDeveloper 11g TP3 + update 1 worked for the composite and showed in the SOA Console the first time.
Regards, Ronald

Can NOT access Service Registry after upgrading SOA Suite to 10.1.3.5

Hi all,
I have a SOA suite 10.1.3.1 installation with Oracle Service Registry 10.1.3.1 installed.
After I upgrade SOA suite to 10.1.3.5, the Oracle Service Registry can not be accessed.
When I access http://myServer:8888/uddi/bsc/web or https://myServer:4443/uddi/bsc/web
The error is:
javax.servlet.ServletException: java.lang.ClassNotFoundException
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:442)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at com.systinet.webfw.WebRawService.displayErrorPage(WebRawService.java:574)
     at com.systinet.webfw.WebRawService.process(WebRawService.java:363)
     at com.idoox.wasp.server.adaptor.RawAdaptorImpl.dispatch(RawAdaptorImpl.java:318)
     at com.idoox.wasp.server.AdaptorTemplate.doDispatch(AdaptorTemplate.java:356)
     at com.idoox.wasp.server.AdaptorTemplate.dispatch(AdaptorTemplate.java:328)
     at com.idoox.wasp.server.ServiceConnector.dispatch(ServiceConnector.java:393)
     at com.systinet.wasp.ServiceManagerImpl.dispatchRequest(ServiceManagerImpl.java:638)
     at com.systinet.wasp.ServiceManagerImpl.handleGetRequest(ServiceManagerImpl.java:1883)
     at com.systinet.wasp.ServiceManagerImpl.access$100(ServiceManagerImpl.java:131)
     at com.systinet.wasp.ServiceManagerImpl$DispatcherConnHandler.handleGet(ServiceManagerImpl.java:2598)
     at com.systinet.transport.servlet.server.Servlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
I tried reinstall Oracle Service Registry, same error.
Todd

Did you install the service registry in the same container as SOA suite, e.g. oc4j_soa.
It is typically best practice to install into separate container so upgrades don't affect other applications.
cheers
James

Compatibility Check of SOA Suite 10.1.3.5. Over WebLogic 10.1.3.3

Hi,
I am seeking one clarification regarding SOA Suite 10.1.3.5. installation over Weblogic 10.1.3.3. As per installation note available over the internet at various site I came to know that for SOA Suite 10.1.3.5 u need to install Weblogic 10.1.3.1. but I have installed the SOA Suite 10.1.3.5 over the Weblogic 10.1.3.3 coz I was already using the 10.1.3.3 as part of OSB11g installation. In my project I am using both OSB11g and SOA Suite 10.1.3.5 and both required different verison of weblogic server while I have installed both on same weblogic server version which is 10.1.3.3 in our lab environment.
As of now things are working fine in Lab environment but I have to take decision whether we can use the same combination in production server or not.
Can any one give some clerification on this issue.

Hello,
Currently Oracle SOA suite 10.1.3.5 is certified on oracle weblogic 10.3.1 only. It is not yet certified on Oracle Weblogic 10.3.3 (used by OSB 11g). When we say "certified" then it means that fully tested and ready to be used and in case any issue comes product vendor will provide the support.
So I will recommend that first of all you contact Oracle Support to get green signal (which I don't think that they will give) to use Oracle Weblogic 10.3.3 for Oracle SOA suite 10.1.3.5 in production and IF (and only if) they assure you to provide support then go ahead and use this combo in production otherwise you will have to use 10.3.1
You may refer the certification matrix of Oracle SOA 10.1.3.5 here -
http://www.oracle.com/technetwork/middleware/ias/downloads/oracle-soa-certification-r3-10-131499.xls
Regards,
Anuj

Error start SOA Suite(J2EE Server)

Usually J2EE Server successfully start and works. But sometimes server cannot start, and shows a following error:
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:time out while waiting for a managed process to start
==================================================
And generates such log-file:
Configuration information
Running in C:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:C:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:orcl.localhost
Instance type:core
Version:10.1.3.1.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, Wsil]
2007-02-16 01:22:44.361--Begin log output for Mid-tier services (orcl.localhost)
2007-02-16 01:22:44.361--Processing Step: starting OPMN
2007-02-16 01:22:45.613--Processing Step: starting OPMN managed processes
2007-02-16 01:51:54.17--End log output for Mid-tier services (orcl.localhost)
An unknown OPMN error has occured
oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:140)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:time out while waiting for a managed process to start
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     ... 6 more
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
Exception caused by
There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:time out while waiting for a managed process to start
==================================================
oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:time out while waiting for a managed process to start
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
<?xml version='1.0' encoding='WINDOWS-1251'?>
<response>
<msg code="-82" text="Remote request with weak authentication.">
</msg>
<opmn id="r-0c2b16d9f3e64:6200" http-status="408" http-response="0 of 1 processes started.">
<ias-instance id="orcl.localhost">
<ias-component id="default_group">
<process-type id="home">
<process-set id="default_group">
<process id="896076993" pid="808" status="Stop" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="failure">
<msg code="-22" text="time out while waiting for a managed process to start">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
</ias-instance>
</opmn>
</response>
Configuration:
WinXP Pro SP2
SOA Suite 10.1.3.1 (installation type: J2EE Server)
Thanks,
stan1slav.

You say:
Usually J2EE Server successfully start and works. But sometimes server cannot start, and shows a following error.
Are you using the SOA Suite on the same machine? I mean does it use the same IP-adress, hostname? Are you using proxy-settings?

SOA suite - WSM Configuration fail

Hello,
I was trying to install the SOA suite through Configuration assistance but installation failed at the WSM configuration. The error shown in the log is
"Unable to locate a valid OC4J URI. The server is probably down". I am trying to install this on Vista OS.
Does anyone have idea about what could the probable problem be. I would really appreciate any assistance.
Thanks.

I have configured my jdev as you suggested but this is what I got when trying to deploy:
BUILD FAILED
D:\projects\workspace\jdeveloper10g\BPELTraining\BPELProcess\build.xml:78: A problem occured while connecting to server "localhost" using port "9700":
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 403--Forbidden</TITLE>
<META NAME="GENERATOR" CONTENT="WebLogic Server">
</HEAD>
<BODY bgcolor="white">
<FONT FACE=Helvetica><BR CLEAR=all>
<TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
<FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 403--Forbidden</H2>
</FONT></TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068 <i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
</FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.4 403 Forbidden</H4>
</FONT><P><FONT FACE="Courier New">The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.</FONT></P>
</FONT></TD></TR>
</TABLE>
</BODY>
</HTML>

Best-practice on versioning a soa suite-application

Hi everyone,
I recently organised a seminar for customers concerning the Soa Suite Stack and one of the interesting questions asked that day was a versioning-question.
Let's say we've build a bpel/esb application interacting with different external and internal webservices and we've deployed this application to our production environment and we need to change an internal web service.
How can we add versioning to this heterogenous system in a consistent way? I know you can tell esb which version of the bpel process it needs to use, but what about the custom and external webservices that we've integrated with?
My 2 cents: You need to add a versioning-tag to you custom web services that you need to manage yourself, and use this versioning tag in the services your integrating with.
Could somebody point me out what best practice is, or what Oracle's development team is working out regarding versioning systems for SOA-applications?

Marc,
Are you saying versioning isn't supported in ESB now? I thought that ESB already uses the versioning tag from bpel when you're integrating bpel and esb?
During the development of my demo I've seen that the version-tag was used when invoking the bpel process through a soa service.

Oracle SOA Suite 11.1.1.5.0 installation setup files

Hi,
Please share me the Oracle SOA Suite 11.1.1.5.0 and OSB installation setup.
like Oracle Weblogic server for OSB, RCU, SOA Suite.
I could able to find in Oracle site only the latest SOA version [11.1.1.6.3] not the older versions.
Thanks,
Pradeep

Pradeep,
You may find 11.1.1.5 installable at https://edelivery.oracle.com
It is recommended to use latest version available though.
Regards,
Anuj

Installation error in oracle soa suite ofm_soa_generic_11.1.1.7.0

Hi all ,
I am getting an error in installation the soa suite in my windows m/c . It has oracle client and database 11gXE installed on it with and RCU . The window registry entry contains KEY_OraDB1g_home and does not have ALL_HOMES.
The installation is try to read from the registry and failing .Any suggesstions.
Below is the log file trace
=========================
[2013-05-14T15:39:49.529+01:00] [OUI] [NOTIFICATION] [] [OUI] [tid: 14] [ecid: 0000JuZUtcF8xky5w7c9yW1H^^m3000005,0] Calling Query areasQueries10.2.0.1.0 getAllOracleHomes
[2013-05-14T15:39:49.529+01:00] [OUI] [WARNING] [] [OUI] [tid: 14] [ecid: 0000JuZUtcF8xky5w7c9yW1H^^m3000005,0] Error reading registry key: HKEY_LOCAL_MACHINE\Software\ORACLE\ALL_HOMES\ID0\NAME
[2013-05-14T15:39:49.529+01:00] [OUI] [NOTIFICATION] [] [OUI] [tid: 14] [ecid: 0000JuZUtcF8xky5w7c9yW1H^^m3000005,0] [[
Query Exception: ErrorReadingWindowsRegistry
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException

I have oracle 11g client already installed on the m/c and on that I installed oracle 11gXE database . After that RCU for creating schema etc for soa suite. When installing the SOA suite it is looking for a registry entry
2013-05-16T14:54:18.968+01:00] [OUI] [WARNING] [] [OUI] [tid: 14] [ecid: 0000JuhbeSJ8xky5w7c9yW1H_EJX000005,0] Error reading registry key: HKEY_LOCAL_MACHINE\Software\ORACLE\ALL_HOMES\ID0\NAME
whereas in my m/c I have only registry entry as HKEY_LOCAL_MACHINE\Software\ORACLE\KEY_OraDB11g_home1 .
Is there as way to configure parameters in soa suite to check the new path in registry entries.

Installation of SOA Suite 11g for development purpose

Hello All,
I wanted to install SOA Suite 11g for development purpose on my laptop (OS Windows XP).
As per installtion prerequisite process in the download page of oracle.
I found the following pre requisite - installation of Oracle DB 11g EE(although i am having Oracle DB 10g R2 10.0.2.0 - now the problem is i am not able to run RCU in this data base, so i installed 11g)
Jdev 11g Download
Web Logic Server
RCU Utlilty run
then SOA Suite installation.
My doubt is , is there any SOA development installation available because 11g DB EE takes lot of space in my system.
if available please provide the link.
Thanks & regards
Aboothahir

Hello Anuj,
Thanks for your reply,
I am running RCU utility on the XE Database.
I am getting the following error:
RCU-6083:Failed - Check prerequisites requirement for selected component:OIM
Please refer to RCU log at C:\rcuHome\rcu\log\logdir.2011-02-07_21-34\rcu.log for details.
Error: JVM is not installed on the Database.
RCU-6092:Component Selection validation failed. Please refer to log at C:\rcuHome\rcu\log\logdir.2011-02-07_21-34\rcu.log for details.
Please provide a solution for this.
Thanks & Regards
Aboothahir M

SOA Suite Installation on Linux 64 bit machine

Hi,
I have to install Oracle SOA Suite 11.1.1.5 on a Linux 64 bit machine. I want to install Oracle SOA Suite 11.1.1.5 version on the machine because any version above will not be supported on my machine. Here is the list of components I want to install.
1. Oracle Database
2. Weblogic server
3. RCU
4. SOA Suite
5. JDeveloper extension
7. BPM extension
8. Oracle Service Bus
Can anybody tell me where can I get the downloadables for these components for Oracle SOA Suite 11.1.1.5 which is Linux 64 bit compatible. I searched the Oracle website but can't find it anywhere? I also looked at edeilivery site of oracle, but no luck. However, if anybody has the URL's to directly download it, then please share.
Thanks,
Saurabh G

Anuj,
Thanks for your response. I can't raise an SR with Oracle since I am learning this on my own.
However to answer your question, I am using Processor AMD, 1.6GhZ with 4 GB RAM.
I have made my system dual boot with Windows 7 and Suse Linux 12.3, both 64 bit operating systems
I have tried to install 11.1.1.6 on my system on windows but the installation got hanged. And when I went for 11.1.1.5 on windows, the installation was smooth and I have it installed on windows7. But now I want to learn to install it on Linux machine also thats why I am asking for 11.1.1.5 downloadables.
Thanks,
Saurabh G
Edited by: Saurabh G on 03-May-2013 22:11

SOA Suite 11.1.1.3 installation - RCU question

Similar Messages

Maybe you are looking for