SOA Suite 11.1.1.6.0 compatibility matrix

Hi,
I want to know the compatibility matrix for Oracle SOA suite 11.1.1.6.0. Is it certified on oracle weblogic 12c? or 10.3.5?
Thanks

Hi.
here is certification information for all fusion middleware products http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
best

Similar Messages

Issue in starting soa suite 10g server in win 7

Hi All,
I recently upgraded my personal laptop to a new laptop with win 7 and hence trying to install all my oracle software from my old laptop to new one.
So far I have installed the following software - Oracle Developer Suite 10g, Oracle XE 11g, Oracle jDev Studio 11g ADF, Oracle Soa Suite 10g
All installation are working fine except the "Oracle Soa Suite 10g".
After installation, the server is starting fine and I am able to log into the Oracle Application Server 10g EM console.
But when I restart my system, I am not able to start the soa suite 10g.
If I run the "opmnctl start" from command line, a new command window is opening and closing immediately.
I am not able to find out the issue.
Can somebody please help me to identify the issue?
While installing the soa suite 10g, I had set the compatibility settings to "Win XP Service Pack 3", which was there in my old laptop.
Kindly help.
Thanks and Regards,
Janny

Hi All,
I recently upgraded my personal laptop to a new laptop with win 7 and hence trying to install all my oracle software from my old laptop to new one.
So far I have installed the following software - Oracle Developer Suite 10g, Oracle XE 11g, Oracle jDev Studio 11g ADF, Oracle Soa Suite 10g
All installation are working fine except the "Oracle Soa Suite 10g".
After installation, the server is starting fine and I am able to log into the Oracle Application Server 10g EM console.
But when I restart my system, I am not able to start the soa suite 10g.
If I run the "opmnctl start" from command line, a new command window is opening and closing immediately.
I am not able to find out the issue.
Can somebody please help me to identify the issue?
While installing the soa suite 10g, I had set the compatibility settings to "Win XP Service Pack 3", which was there in my old laptop.
Kindly help.
Thanks and Regards,
Janny

SOA Suite 11g and its compatibility with Weblogic

Hi ,
I have two questions:
1. From where do I download the SOA Suite 11g --Link to the download?
2.If SOA suite 11g can be installed on weblogic. I understand that SOA suite 10.1.3.4 is compatible with weblogic 9.2 but need some inputs on the SOA Suite11g!
Cheers
Prabal

Prabal,
Did you get an answer or we have to wait for the official release till July-1-2009.
Thanks,
Rahul

Compatibility Check of SOA Suite 10.1.3.5. Over WebLogic 10.1.3.3

Hi,
I am seeking one clarification regarding SOA Suite 10.1.3.5. installation over Weblogic 10.1.3.3. As per installation note available over the internet at various site I came to know that for SOA Suite 10.1.3.5 u need to install Weblogic 10.1.3.1. but I have installed the SOA Suite 10.1.3.5 over the Weblogic 10.1.3.3 coz I was already using the 10.1.3.3 as part of OSB11g installation. In my project I am using both OSB11g and SOA Suite 10.1.3.5 and both required different verison of weblogic server while I have installed both on same weblogic server version which is 10.1.3.3 in our lab environment.
As of now things are working fine in Lab environment but I have to take decision whether we can use the same combination in production server or not.
Can any one give some clerification on this issue.

Hello,
Currently Oracle SOA suite 10.1.3.5 is certified on oracle weblogic 10.3.1 only. It is not yet certified on Oracle Weblogic 10.3.3 (used by OSB 11g). When we say "certified" then it means that fully tested and ready to be used and in case any issue comes product vendor will provide the support.
So I will recommend that first of all you contact Oracle Support to get green signal (which I don't think that they will give) to use Oracle Weblogic 10.3.3 for Oracle SOA suite 10.1.3.5 in production and IF (and only if) they assure you to provide support then go ahead and use this combo in production otherwise you will have to use 10.3.1
You may refer the certification matrix of Oracle SOA 10.1.3.5 here -
http://www.oracle.com/technetwork/middleware/ias/downloads/oracle-soa-certification-r3-10-131499.xls
Regards,
Anuj

Using Oracle 8i DB in SOA suite 11g

Hi All,
Good Morning.. Hope all are doing good.
I need a permanent solution or some work around for my below issue:
We were on SOA suite 10.1.3.4 and now we are migrating to SOA suite 11.1.1.5
We have legacy system which has Oracle 8i DB.
For some of our interfaces we are using this 8i DB for intergration.
But 11g SOA suite doenst support Oracle 8i DB.
But is there any option or any sort of work around so that we can use this?
Any option, suggestion, work around are most welcome.
Hope I will have some options to try with, and resolve this issue.
Thanks all for your valuable time spent on my issue.
Cheers,
Chandru

Hi Chandru
1. Yes, what you want is very much possible. I would like to clarify few things hopefully if you are not already aware of this.
2. Earlier SOA 10g is on top of Oracle's OAS/OC4J. Now SOA 11.5 is on top of the Weblogic Server app server which is from BEA. When you create SOA 11.5 (or any soa 11.x domain), to store all meta-data you need atleast 2 minimum schemas in some Oracle Database like SOA_INFRA, MDS. These schemas are created using a giant utilty sql script(s) called RCU (Repository Creation Utility). Now this RCU can work only with Oracle 10g and 11g databases and NOT oracle 8i DB. But remember this is only to store all the Process/Task information in Meta-Data tables which you hardly change or modify.
3. So go ahead and upgrade to SOA 11.5 and use latest Oracle 11g or 10g database for RCU. Now comes your old legacy usecase, which needs some data from Oracle 8i db. This means it is a custom application or custom usecase that connects to Oracle 8i. From Weblogic Admin Console, you can create something called Data Source (having a connection pool) and give DB Host, port, sid, username/password of your 8i db. And choose Oracle 10 g thin drivers. If I am not wrong, Oracle 10g drivers should support oracle 8i db also. Using this DataSource JNDI name, you can do pretty much everything either from Java Code, EBJ code or from the Workflow application.
4. As other users mentiones, you can always use DB Adapter to connect to this 8i DB. Worst case, I am not a DB Expert. But in Oracle 11g or 10 g database, I wonder if you can create like a DB Link to connect to your old 8i Database. DB experts can help here.
5. Finally if none of the above solutions work, you can always write a simple JAVA/EJB code to connect to your database in very primitive way directly giving db host, port, sid, username, plain text password and if required add 8i DB oc4j jar in classpath. Then use java embedded or ejb adapter to pull this data into your bpel process. Hopefully you may not end up here.
In conclusion, yes it should be possible to access your data from 8i database but SOA Domain should point to ORacle 10g/11g DB only though for its meta-data etc.
Here is a post for similar case but for OBIEE 11g that wants to create Reports from 8i DB:
Re: Regarding OBIEE compatibility with Oracle Database version 8i
Thanks
Ravi Jegga

Need help in creating SOA SUITE RESTFul Service.

Hi All,
I have a requirement to provide a restful service url to other party to post plain xml message.
So i have configured HTTBinding as below
Type : Service
Operation Type : One Way
OperationName : Send
Verb : Post
Payload type : xml
its one way transaction, we dont need to send response back to other party.
After my configuration, when i use the URL to post some xml message from REST client
i get a error "<error>oracle.fabric.common.FabricException: Unable to find operation: unknown</error>" same error even in composite with no instace created
and when i add a header property SOAPAction : Send then message goes through adapter and i see instances in composite.
But unfortunatly the team whos posting messages to fusion were not able to add any property
Is there any we can solve this with out Header Property added at client side.
Or Do we have any other way to create a RESTFull service in soa suite(i guess OSB allows this.)
Help appreciated
im using soa suite 11g
thanks in advance guys
Regards
Sujan.

Amir
You need to set the compatibility of the setup.exe file that was downloaded
- right click setup.exe
- click on properties
- go to the compatibility tab, check the box that says 'run this program in compatibility mode for',
- select 'Windows XP service pack 2' from the drop down list.
- Click ok and try again
It then runs it as if it was XP (v 5.2 )
However there are a bunch of other tasks to do install on vista
check
'Start SOA Suite' fails after laptop restart.
for details of other config..
It would be interesting to see if you are successful as I currently cannot install it on my vista machine..
Good luck
Will

Query regarding installation of SOA Suite on Windows Vista 64 Bit

Hi,
I would like to setup a development enviroment having Oracle SOA Suite 10g and Oracle Database Server 10g on my laptop. Please can anyone clarify whether these softwares are compatible with a laptop of below mentioned configuration:
===========================================================HP Pavilion dv9700t Notebook PC
Windows Vista Home Premium with Service Pack 1 (64-bit)
Intel(R) Core(TM) 2 Duo Processor T5750 (2.0 GHz)
17.0" diagonal WSXGA+ High-Definition HP BrightView Widescreen Display (1680 x 1050)
3GB DDR2 System Memory (2 Dimm)
256MB NVIDIA GeForce 8400M GS
320GB 5400RPM SATA Hard Drive
===========================================================
I have gone through the compatibility matrix. However, the compatibility matrix mentions that Oracle software is compatible with EM64T processor.
Request clarification on whether an Intel(R) Core(TM) 2 Duo Processor T5750
(2.0 GHz) belongs to EM64T family or not.
Thank you.
Regards,
Balu

Didn't you read the posts in your other thread? Several people told you what needed to be done.

SOA Suite for Linux 64 bit

I had been using a Oracle Application Server 10g Release 3 (10.1.3) Media Pack for Linux x86 (32-bit). We are now moving to a 64-bit Linux. I cannot find a Oracle Application Server 10g Release 3 (10.1.3) Media Pack for Linux x86 for 64-bit Linux. Is it supported on 64 bit.
Also, can an Oracle Enterprise Linux be used instead of RHEL ?
Cheers,
Arun Ramesh

I thought most X64 architectures can support 32 bit apps. Even if the SOA Suite runs in 64 Bit, the JVM will alone be running in 32 Bit. So there should not any compatibility problems.
Is that right?

SOA Suite 11g on OEL5 Fails for RPMS of OEL4

I want to install SOA suite 11g on following platform
[root@hs-idc1 etc]# cat enterprise-release
Enterprise Linux Enterprise Linux Server release 5.4 (Carthage)
[root@hs-idc1 etc]# cat redhat-release
Red Hat Enterprise Linux Server release 5.4 (Tikanga)
[root@hs-idc1 etc]# uname -a
Linux hs-idc1.idc.oracle.com 2.6.18-164.el5PAE #1 SMP Thu Sep 3 02:28:20 EDT 2009 i686 i686 i386 GNU/Linux
But prerequsit check of installer get result : enterprise-4 ( as below) and rpms check fails for the OEL4 related RPMS.
hardnofiles and softnofiles Ofcourse understood. But why it could be failing this RPMS?
Checking operating system certification
Expected result: One of enterprise-4,enterprise-5,redhat-4,redhat-5,SuSE-10
Actual Result: enterprise-4
Check complete. The overall result of this check is: Passed
Checking recommended operating system packages
Checking for gcc-3.4.3-22.1; found gcc-4.1.2-46.el5-i386.     Passed
Checking for gcc-c++-3.4.3-22.1; found gcc-c++-4.1.2-46.el5-i386.     Passed
Checking for openmotif21-2.1.30-11.RHEL4.4; Not found.     Failed <<<<
Checking for setarch-1.6-1; found setarch-2.0-1.1-i386.     Passed
Checking for pdksh-5.2.14-30; Not found.     Failed <<<<
Checking for sysstat-5.0.5-1; found sysstat-7.0.2-3.el5-i386.     Passed
Checking for gnome-libs-1:1.4.1.2.90-44.1; Not found.     Failed <<<<
Checking for libstdc++-3.4.3-22.1; found libstdc++-4.1.2-46.el5-i386.     Passed
Checking for libstdc++-devel-3.4.3-22.1; found libstdc++-devel-4.1.2-46.el5-i386.     Passed
Checking for compat-libstdc++-296-2.96-132.7.2; found compat-libstdc++-296-2.96-138-i386.     Passed
Checking for compat-db-4.1.25-9; Not found.     Failed <<<<
Checking for control-center-2.8.0-12; found control-center-1:2.16.0-16.el5-i386.     Passed
Checking for glibc-common-2.3.4-2.9; found glibc-common-2.5-42-i386.     Passed
Checking for binutils-2.15.92.0.2-13; found binutils-2.17.50.0.6-12.el5-i386.     Passed
Checking for make-1:3.80-5; found make-1:3.81-3.el5-i386.     Passed
Checking for xscreensaver-4.18-5.rhel4.2; Not found.     Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Checking kernel parameters
Checking for VERSION=2.6.9; found VERSION=2.6.18-164.el5PAE.     Passed
Checking for hardnofiles=4096; hardnofiles=1024.     Failed <<<<
Checking for softnofiles=4096; softnofiles=1024.     Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Checking Recommended glibc version
Expected result: ATLEAST=2.3.4-2.19
Actual Result: 2.5-42
Check complete. The overall result of this check is: Passed
Checking physical memory
Expected result: 1024MB
Actual Result: 3888MB
Check complete. The overall result of this check is: Passed
Any help appreciated...

I usually don't care about minor version differences if I have a newer version. These will be considered by the installer as well.
It is important to install the missing packages anyway, just look for the basenames.
BTW, openmotif is most confusing one. In Linux you have three different packages of it, even if the other two are installed, the third is still missing and the installer will fail.
--olaf
PS: Looks like you are an Oracle employee. Please use the internal mailing lists instead of the public forums.

Error message deploying a composite in SOA Suite 11g

Hello,
We are attempting to deploy a composite to SOA Suite 11g (11.1.1.3). We're getting an 'Unable to register service' error message. When I inspect the log files I see the following entry as the first error:
Failed to retrieve policy[[
oracle.wsm.policyaccess.PolicyAccessException: WSM-06146 : Error deleting the attachment entries.
Anybody have any experience with this error? The error message reference has the following listed:
WSM-06146: Error deleting the attachment entries.
Cause: Failure occurred while deleting the attachment entries.
Action: Ensure that a valid list of policy subjects for deactivated lifecycle type is passed
Level: 32
Type: INCIDENT_ERROR
Impact: Configuration
I don't know how to "ensure that a valid list of policy subjects for deactivated lifecycle type is passed". Please help!!!!
Thanks,
jh

This is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM

Error in starting SOA Suite

Hi Friends...
I couldn't start my SOA suite and it is showing the fallowing error
OPMN has thrown an unknown exception
Error starting opmn server: 2
The generated reported is.......................
Configuration information
Running in C:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:C:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:oc4j_soa.raghava-2d1cb5a
Instance type:allProducts
Version:10.1.3.1.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, orabpel, oraesb, owsm, Wsil]
2010-02-10 07:35:19.62--Begin log output for Mid-tier services (oc4j_soa.raghava-2d1cb5a)
2010-02-10 07:35:19.62--Processing Step: starting OPMN
2010-02-10 07:40:38.171--End log output for Mid-tier services (oc4j_soa.raghava-2d1cb5a)
OPMN has thrown an unknown exception
oracle.appserver.startupconsole.model.ConsoleException: OPMN has thrown an unknown exception
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:108)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticBadRequestException: Error starting opmn server: 2
     at oracle.ias.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:147)
     at oracle.ias.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:77)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:90)
     ... 6 more
Exception caused by
Error starting opmn server: 2
oracle.ias.opmn.optic.OpticBadRequestException: Error starting opmn server: 2
     at oracle.ias.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:147)
     at oracle.ias.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:77)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:90)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Friends help me out........
Thanks In Advance

This is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM

Oracle SOA suite 11.1.1.7 on windows 8 OS, But, during installation i got a problem "Check OS Certification".

I want to install Oracle SOA suite 11.1.1.7 on windows 8 OS, My personal HP Pavilion g6 laptop. But, during installation i got a problem "Check OS Certification". What is this certification. Please Help Me.
Regards,
Satish.

Pl identify exact version of Windows 8. Have you verified that your OS is supported/certified by consulting the spreadsheet at Oracle Fusion Middleware Supported System Configurations

Issue in SOA Suite Installation - prerequisite for AIA 3.0 Installation

We are facing an issue in SOA Suite Installation which is prerequisite for AIA 3.0 Installation. As per AIA 3.0 Installation Guide, the Web Logic Server version to be used is “Web Logic Server 11g R1 10.3.1“ for Linux86 32bit Version.
After Installation of SOA Suite on Linux Environment, the em console page is not opening.
Error Message :
<Feb 1, 2010 5:21:50 PM IST> <Warning> <Connector> <BEA-190110> <Resource Adapter is calling BootstrapContext.createTimer() and allocating a Timer Thread that is not managed by WebLogic Server. This may adversely impact the performance/operation of WebLogic Server.>
<Feb 1, 2010 5:21:50 PM IST> <Warning> <J2EE> <BEA-160140> <Unresolved optionalpackage references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.soa.fabric, Specification-Version: 11.1.1, Implementation-Version: 11.1.1, referenced from: /app/oracle/weblogic/user_projects/domains/SOADomain/servers/soa_server1/tmp/_WL_user/worklistapp/r8n7fr]. Make sure the referenced optional package has beendeployed as a library.>
<Feb 1, 2010 5:21:50 PM IST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'worklistapp' due to error java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;.
We have faced such issue during SOA 11g Installation on Windows Operating System, and installed latest version of Web logic Server and the issue was resolved.
Can AIA Linux Installable work on Web Logic Server 11g R1 10.3.2?
If any one has faced similar issues, Kindly provide inputs.

The same person has reported issues on further steps i.e. AIA Installation. Hence closing this

Get Custom SOAP Header Value in SOA Suite 11.1.1.6 using BPEL 1.1

Hi Experts,
We are using SOA Suite 11.1.1.6 and in one of the projects we have requirement to retrieve custom SOAP header value.
This is enhancement to existing process which is developed using BPEL 1.1 and deployed to Production. So we cannot convert this now to BPEL 2.0
We suggested to use custom XML element in Header the definition of which will be defined in custom XSD and stored in common location. However the 3rd party who are invoking this service will not be able to do any customization in their process to pass custom XML header.
Please can you help me in providing any approach through which we can retrieve custom Header value from SOAP header using BPEL 1.1
I have read some blogs for retrieving the custom XML header but they are using BPEL 2.0. I would like achieve this functionality using BPEL 1.1
Appreciate your inputs.
Thanks in Advance - RK

Hello RK,
Have you've tried to put the bpex:outputHeaderVariable on the invoke activity of the invoked service.
<invoke name="Invoke"
bpelx:outputHeaderVariable="HeaderVariable"/>
Where the "HeaderVariable" reflects the XSD Datastructure of the received header.
This is also specified here in section 6.19.1 How to Receive SOAP Headers in BPEL
Please note that the exact header must be specified in the WSDL of the invoked service.
Also note that in case of a soap fault. No header will be returned from the invoked service but only a /soap/body/fault part.
Good luck!
Melvin

Find a BUG on the SOA Suite ( Internationalizing Problem)

I am a java developer in Thailand.
I have 4 Java Certifications - SCJP, SCWCD, SCBCD, SCJWSD.
I meet something wrong ("bug") when I play with Oracle SOA Suite.
About my technical software :
-I use the Oracle Database XE (Universal).
(I cannot use the HTML DB to run your script from soademo_101310_preview - it's give me the error messages so I change to run the SQL from command. Although running the SQL script from the command line is O.K., the command window is not support the Thai language. It appear in Alien language that I cannot read.I try to change the command window option but It has only 2 font choices. Thus I cannot still do with Thai language in the command window.)
In control panel, the regional and Language Option, I set the standard and format to Thai (including Language for the non-Unicode program in Advanced Tab).
I am successful both insallation and deploy the SOA book application.
I follow the instruction in Oracle SOA Suite Quick Start Guide, 10g Release 3 (10.1.3.1.0).
At the page 39, I find a BUG.
My created date on the BPM Worklist is wrong !!!
My computer time is 10 กันยายน ( September in Thai language) 2549 (Buddhist Time).
But the date I see in the BPM Worklist is 10 กันยายน ( September in Thai language) 3635 (Buddhist Time).
You can see the image at http://img178.imageshack.us/img178/5487/datehp3.jpg.
I have 3 questions :
1. How can I add the Thai font in SQL command line window (SQL*Plus) in Oracle XE ?
2. Why does the HTML DB not support to run the uncomplete sql script ?
3. Have any suggestion to correct the time problem. ( Internationalizing Problem) ?
Thank you very much.

This is not a bug.
The timezone is based on the user profile.
You are using jcooper, whose timezone setting by default is set to be
<timeZone>America/Los_Angeles</timeZone>
Please double check the
ORACLE_HOME\OraBPEL_1\bpel\system\services\config\users-properties.xml
jcooper should have settings like this by default:
<name>jcooper</name>
<description>Demo User</description>
<email></email>
<title>Loan Agent 1</title>
<firstName>James</firstName>
<lastName>Cooper</lastName>
<manager>jstein</manager>
<timeZone>America/Los_Angeles</timeZone>
<languagePreference>en-US</languagePreference>
<notificationPreferences>Mail</notificationPreferences>
Message was edited by:
user530868
Message was edited by:
user530868

SOA Suite 11.1.1.6.0 compatibility matrix

Similar Messages

Maybe you are looking for