SOA Suite 11g Admin console EM link

I have installed SOA suite 11g onto a windows XP machine with a local loop back network adaptor. When I go to the WebLogic Server Administration Console home page the link for the Oracle Enterprise Manager is picking up the loop back network adaptors IP address (10.10.10.10). This results in the link not working when accessed over the network. I can replace the local IP address with the machine name or DHCP IP address within the browser to work round the issue. However, is there any way to correct this and re-configure the link to use the actual IP address like the other links?
Regards
Neil

Another way is to get rid of the Loopback Adapter (ie unconfigure it) and just install it. WLS has no issues with DHCP environments.
--olaf

Similar Messages

Error while starting the AqAdapter in SOA Suite 11g Admin Console

facing an issue with the AqAdapter(Resource Adapter) in Soa Suite 11g Admin Console.
we go to Deployments --> Select Aq Adapter --> Currently it shows the status as Prepared
Now we try to Start it again --> it comes back with the error message mentioned below
weblogic.application.ModuleException: weblogic.connector.exception.RAException:
Jndi Name is null or empty. Errors were encountered while performing this operation.
source path on the admin server is mentioned here for this AqAdapter:
/opt101/app/oracle/SOAD/SOA11gR1/fmw/Oracle_SOA1/soa/connectors/AqAdapter.rar
deployment plan :
/opt101/app/oracle/SOAD/SOA11gR1/fmw/Oracle_SOA1/soa/connectors/was/Plan. xml
We check in the Configuration tab --> Outbound Connection Pools -->
here it shows the Group as javax.resource.cci.ConnectionFactory and under it we have setup
2 connection pool instances with JNDI names as : eis/AQ/aqSample & eis/aq/B2BAQ
Could someone please help here as to what could be the reason why this error is coming and
how we could resolve this.
With Regards & thanks

This is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM

B2B Console "missing" in SOA SUite 11g R1 PS3?

I have a brand new SOA SUite 11g R1 PS3 installation, using the following installation steps:
OracelXEUniv
WebLogic Server 10.3.4.0
SOA Suite 11.1.1.2
SOA Suite 11.1.1.3
SOA Suite 11.1.1.4
Created a new single server domain using teh new 11.1.1.4 developer template
I can start the weblogic console, no problem
I can start the enterprise manager console, no problem
when I try to start the B2B Web Console http://localhost:7001/b2bconsole, or http://localhost:7001/b2b I get the 404 HTTP error - the console applicaitn is not found
Can someone, please, suggest what I am missing?
Thanks in advance

Hello Michael,
I analyzed this issue and found that it is working as designed. Developers templates are designed for low memory hosts and hence certain applications like b2bui, composer, OracleAppsAdapter etc. does not get deployed by default. If a user wants to use these applications then he may target and deploy them manually from Weblogic Admin console.
As these applications may not be required for all users who installed SOA (because SOA installable contains many components of SOA like BPEL, Mediator, Rules, Workflow, B2B and BPM Suite as well and a developer may not be interested in using all these applications), so these apps does not get deployed by default.
For the benefit of other users of this community, I have blogged about the same here where you may also find steps that how to enable these applications -
http://anuj-dwivedi.blogspot.com/2011/02/b2b-consolesoa-composer-not-opening-up.html
Thanks for bringing this issue up here in this forum.
Regards,
Anuj

Change configuration of Admin Server (SOA Suite 11g)

Hi!
I'm using SOA Suite 11g. I've installed SOA Suite 11g on a remote machine and I want to access the Oracle Fusion Middleware Control remotly but I can't. I can only access locally by launching a browser on the local machine.
How I can configure the admin server to be accessible by another computer?
Thanks in advance
Tiago Soares

By default you will be able to access the Admin Console and Fusion Middleware Control from any machine.
Access like http://hostname:port/em or http://hostname:port/console
If it is a DHCP machine, try accessing using the machine ip, instead of hostname.
If this doesn't work, login to Admin console in your local box. Navigate to Servers -> Admin Server. Set the Listen address to that machine's ip or name, now you will be able to access.

Cannot access EM console on SOA Suite 11g (404 error)

I have installed SOA Suite 11g on a new environment. The admin server and managed server (soa_server1) start up without any errors in logs. However after start up, I am unable to access the enterprise manager console at http://host:port/em due to 404. Interestingly, I can access the WebLogic administration console at http://host:port/console without any issue.
I have installed SOA Suite 11g before on my local machine and have never had any issue like this before.
Is there a way to manually start up the enterprise manager application? I have seen some advise in previous posts which mention the use of emctl (enterprise manager command line control) however, this does not appear applicable to the em app that runs on WebLogic application server in 11g.
Any troubleshooting advice would be greatly appreciated!

You can access the EM using http://host:7001/em url.
But for EM to be present in the domain, you should have created your domain with Enterprise Manager template selected. I think, you haven't done this step. Login to your WLS Admin Console, navigate to Deployments. Check for an application named 'em'. If it is not there, then this is the issue.
To get your domain extended with EM, do these steps.
1. Stop your servers in the domain.
2. Invoke the configuration wizard ($ORACLE_HOME/common/bin/config.sh/cmd)
3. Choose Extend Domain option. Select your domain.
4. Select Enterprise Manager template. Complete the wizard.
5. Start your servers.
Now you will be able to access EM, using the above URL.
There is no need for emctl in SOA 11gR1. Starting the Admin Server will help you to work in EM.
Hope this helps!!!

Oracle SOA Suite 11g - 11.1.1.2 Complete pdf documentation link

Hi All,
Can you please point me the link to download complete pdf documentation link for "Oracle SOA Suite 11g - 11.1.1.3" Thanks in advace!
Regards,
-Siva.

Entire Oracle Fusion Middleware 11g documentation can be downloaded from here -
http://www.oracle.com/technetwork/middleware/docs/middleware-093940.html
Regards,
Anuj

SOA Suit 11g Installation problem Admin server is not starting

Hi,
I am trying to install SOA Suit 11g but every time I am getting below error and unable to resolve it.I was hacing apache which I have deleted still I am getting below jasper error.Thanks a lot in advance.
SOA Suit - 11G
Database - Oracle XE 10G
Weblogic - 11G
<May 2, 2011 2:04:02 PM IST> <Warning> <oracle.wsm.resources.policyaccess> <WSM-06219> <A task scheduler was not available for configuring the oracle.wsm.policymanager.accessor.BeanAccessor repository accessor for the default context.>
<May 2, 2011 2:04:10 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NoClassDefFoundError: org/apache/jasper/runtime/JspFactoryImpl.
java.lang.NoClassDefFoundError: org/apache/jasper/runtime/JspFactoryImpl
at org.apache.jasper.compiler.JspRuntimeContext.<clinit>(JspRuntimeContext.java:73)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.sun.faces.config.ConfigureListener.isJspTwoOne(ConfigureListener.java:529)
at com.sun.faces.config.ConfigureListener.registerELResolverAndListenerWithJsp(ConfigureListener.java:553)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: org.apache.jasper.runtime.JspFactoryImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:04:10 PM IST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'usermessagingserver'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: org.apache.jasper.runtime.JspFactoryImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:04:12 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext.
java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.sun.faces.config.ConfigureListener.isJspTwoOne(ConfigureListener.java:529)
at com.sun.faces.config.ConfigureListener.registerELResolverAndListenerWithJsp(ConfigureListener.java:553)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:216)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:04:12 PM IST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'worklistapp'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.sun.faces.config.ConfigureListener.isJspTwoOne(ConfigureListener.java:529)
at com.sun.faces.config.ConfigureListener.registerELResolverAndListenerWithJsp(ConfigureListener.java:553)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:216)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:04:13 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext.
java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.sun.faces.config.ConfigureListener.isJspTwoOne(ConfigureListener.java:529)
at com.sun.faces.config.ConfigureListener.registerELResolverAndListenerWithJsp(ConfigureListener.java:553)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:216)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:04:13 PM IST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'DefaultToDoTaskFlow'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.sun.faces.config.ConfigureListener.isJspTwoOne(ConfigureListener.java:529)
at com.sun.faces.config.ConfigureListener.registerELResolverAndListenerWithJsp(ConfigureListener.java:553)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:216)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:04:54 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext.
java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.sun.faces.config.ConfigureListener.isJspTwoOne(ConfigureListener.java:529)
at com.sun.faces.config.ConfigureListener.registerELResolverAndListenerWithJsp(ConfigureListener.java:553)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:216)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:04:54 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener oracle.bpm.workspace.adf.ADFWorkspaceContextListener failed: java.lang.NullPointerException.
java.lang.NullPointerException
at oracle.bpm.workspace.adf.ADFWorkspaceContextListener.contextDestroyed(ADFWorkspaceContextListener.java:70)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:482)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextDestroyedEvent(EventsManager.java:200)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:04:54 PM IST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'OracleBPMWorkspace'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.sun.faces.config.ConfigureListener.isJspTwoOne(ConfigureListener.java:529)
at com.sun.faces.config.ConfigureListener.registerELResolverAndListenerWithJsp(ConfigureListener.java:553)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:216)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:04:55 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext.
java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.sun.faces.config.ConfigureListener.isJspTwoOne(ConfigureListener.java:529)
at com.sun.faces.config.ConfigureListener.registerELResolverAndListenerWithJsp(ConfigureListener.java:553)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:216)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:04:55 PM IST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'BPMComposer'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.sun.faces.config.ConfigureListener.isJspTwoOne(ConfigureListener.java:529)
at com.sun.faces.config.ConfigureListener.registerELResolverAndListenerWithJsp(ConfigureListener.java:553)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:216)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:04:56 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext.
java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.sun.faces.config.ConfigureListener.isJspTwoOne(ConfigureListener.java:529)
at com.sun.faces.config.ConfigureListener.registerELResolverAndListenerWithJsp(ConfigureListener.java:553)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:216)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:04:56 PM IST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'SimpleApprovalTaskFlow'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.sun.faces.config.ConfigureListener.isJspTwoOne(ConfigureListener.java:529)
at com.sun.faces.config.ConfigureListener.registerELResolverAndListenerWithJsp(ConfigureListener.java:553)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:216)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:05:00 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext.
java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.sun.faces.config.ConfigureListener.isJspTwoOne(ConfigureListener.java:529)
at com.sun.faces.config.ConfigureListener.registerELResolverAndListenerWithJsp(ConfigureListener.java:553)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:216)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:05:00 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NullPointerException.
java.lang.NullPointerException
at com.sun.faces.config.ConfigureListener.contextDestroyed(ConfigureListener.java:241)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:482)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextDestroyedEvent(EventsManager.java:200)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:05:00 PM IST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'em'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: Could not initialize class org.apache.jasper.compiler.JspRuntimeContext
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.sun.faces.config.ConfigureListener.isJspTwoOne(ConfigureListener.java:529)
at com.sun.faces.config.ConfigureListener.registerELResolverAndListenerWithJsp(ConfigureListener.java:553)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:216)
Truncated. see log file for complete stacktrace
>
<May 2, 2011 2:05:00 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file F:\Middleware\SOASuite11gR1PS3\user_projects\domains\SOASuitePS3DevDomain\servers\AdminServer\logs\SOASuitePS3DevDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>

weblogic.transaction.internal.TimedOutException: Transaction timed out after 302 seconds What is the current value of JTA timeout in your domain? Try to increase it and test the deployment again.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'SynchRead' failed due to: No Data to process. No Data to process. File C:\ftp\FileToRead.txt to be processed was not found or not available or has no contentGenerally this issue comes when provided path is not valid but as you mentioned that path is correct and permissions are given, make sure that file has not been opened by any other process which has put a lock on this file. As you said it's a sync read and composite in which this is included, is not getting deployed then how it is getting called? What is the execution start point of your composite and if it is not deployed then why this error?
Regards,
Anuj

How to create users for B2B console in SOA Suite 11g?

Hi,
I have installed SOA Suite 11g and created a new user in weblogic server and assigned groups Deployers, Monitors & Operators. On trying to login(http://hostname:port/b2bconsole) using this new user, im not able to login and the below error is logged.
"There are no trading partners for this user".
Can someone plesae guide me on how to create a new user for B2B as i dont want to grant adminstrators group to developers.
Thanks,

Hi,
Please login as the weblogic server boot user into b2bconsole and then go to users tab of the host trading partner
and search for the newly added user [ provide full username ]
and then assign the role as administrator / monitor from there.
once this is done.. the newly added user should be able to login to the b2bconsole..
monitors have read only access and less priveledges..
Regards,
Vijay

SOA Suite 11g Clustering error/oracle bug ?

Hi, i got several experiment to implement soa suite 11g clustering, in my company.. at this moment we still use development mode in our application server. now i'm trying to get into production and also i want cluster the server.. here is the chronology what i do.
i got 3 server :
my plan is
server #1 become an proxy server, let say the name is soa_proxy
server #2 become an cluster node, let say the name is soa_server1
server #3 become an cluster node, let say the name is soa_server2
so i start install & configure it (applications is running under Windows Server 2003)
1.*soa_proxy*
- Installing WebLogic server
- Installing SOA
- Create Repository with RCU (oracle 10g database)
2.*soa_server1*
- Installing WebLogic server
- Installing SOA
3.*soa_server2*
- Installing WebLogic server
- Installing SOA
after installation finished, then i create domain in soa_proxy server let say it name 'MyDomain', then i assign the soa_server1 and soa_server2 in cluster node named 'MyCluster', also i assign the soa_proxy server as a HTTP Proxy Server.. i'm following the instructions just like this link Link: [http://download.oracle.com/docs/cd/E12839_01/doc.1111/e13925/config_screens.htm#CJAEABGD]
all the installation seems good, but when i try to deploy my composite application into the proxy server 'soa_proxy' with JDev, i got error like this
Image: !http://img9.imageshack.us/img9/2122/error2z.jpg!
and when i go to Http://hostname:7001/em
i just see my composite deployed only in 'soa_server2'.
UPDATE : well, now the error was gone when deploying. but we still got little odd result,
when i deploy with jdev, it still fine, until i go to the enterprise manager. yess still.. my composite only deplyed in 'soa_server1'. i got some reference that we can copy the domain directory in soa_proxy and then paste into the server that not yet been deployed before. its seems oke..
i've been thinking, how if i got 10 node of cluster? 50 node of cluster ? should i copy the directory just like that ?? is there another charmed way to do it???
can somebody help me with this simple case?
regards
Wildan
Edited by: wildsoft on Feb 12, 2010 11:33 AM
=======
here is my last trial to deploy the cluster environment, then i just got the same issues, our team here think thats the issues causing by oracle bug in code behind. for reminder what i do last experiment
1. we deploy/configure the domain (admin console,cluster node) then starting up all the services smoothly without no issues & as we saw in the console monitor we can see the cluster is syncronizing.
2. then we create simple composite.
3. we try to deploy the composite to the cluster domain, and what we got is the composite only deployed in one cluster node.
let me describe to clear it,
* first trial, when we deploy the composite, here is what we got in em console
*[-] SoaInfra (SoaServer1)*
[+] CompositeLabTest
*[-] SoaInfra (SoaServer2)*
in JDev we also saw this message (the project CompositeLabTest Deploy Process is skipped), some kind like that
* second time trial, we try to shut the SoaServer2 down, then restart it, what we got in em console
*[-] SoaInfra (SoaServer1)*
[+] CompositeLabTest
*[-] SoaInfra (SoaServer2)*
[+] CompositeLabTest
. so until today my soa suite 11g clustering experience is never going good practice.. any of you may had experience with clustering too, how that can be done? please respon...
thanks
regards
Wildan Abdat
Edited by: wildsoft on Apr 27, 2010 4:08 PM
Edited by: wildsoft on Apr 27, 2010 4:13 PM

Hi there.
Me too I have a similar problem with cluster deployment.
I have two different domains in two different phisical machine on the same LAN.
These domains are equals and the sole difference is regarding the IP configuration:
domain 1
machine 172.0.0.1
soaadmin 172.0.0.1
soa1 172.0.0.2
soa1 172.0.0.3
domain 2
machine 172.0.1.1
soaadmin 172.0.1.1
soa1 172.0.1.2
soa1 172.0.1.3
When I try to deploy a new composite from the EM this fails (it remains in waiting for a response like the followed)
<Jun 18, 2010 10:42:00 AM CEST> <Warning> <org.apache.myfaces.trinidadinternal.context.RequestContextImpl> <BEA-000000> <Could not find partial trigger idArchiveFileBrowserDialog from RichInputText[UIXEditableFacesBeanImpl, id=idArchiveLoc]>
Processing sar=/tmp/dir2448127768139530528tmp/sca_SOAComposite1_rev1.0.jar
Adding sar file - /tmp/dir2448127768139530528tmp/sca_SOAComposite1_rev1.0.jar
Creating HTTP connection to host:172.0.0.2, port:10002
What I checked:
In multicast configuration soa1 (domain1) sent the request to all soa servers in the LAN (even in that one that aren't configurated in his domain)
In unicast configuration soa1 (domain1) sent the request only to the soa2 (domain1) server but it remain in waiting for a response for all the time.
What it is strange is that if I stop the domain2 the request can be performed and my composite is deployed in both the servers.
Any idea about this strange behaviour?
N.B.
I'm not using Coherence.

Distributed deployment of SOA Suite 11g

Could please anyone guide how to install and run the SOA Suite 11g across 3 different Windows machines. I'd like to setup a SOA Suite WebLogic domain, where the 1st machine is running admin server, the 2nd running soa_server1 and 3rd running bam_server1.
Thanks!

If you want to setup like the above requirement do these.
1. Invoke config wizard. Choose Create domain. Select SOA, BAM & EM.
2. In the Machines screen, create two machines other than LocalMachine. Modify the listen address of these machines to the respective machine ips.
Eg: MachineA- localhost
MachineB - MachineB IP/Hostname
MachineC- Machine C IP/Hostname.
3. Assign SOA server to machine A & BAM server to MachineB.
4. Complete the configuration.
5. Now run the pack command from $ORACLE_HOME/common/bin with -managed option.
6. Unpack the domain in MachineB & MachineC.
7. Start the Admin server in MachineA. Login to Admin Console. Navigate to Servers -> Admin Server -> SSL. In Advanced Section, sethostname verification to NONE. Restart the Admin server.
8. Start Nodemanager in all the machines. (Make sure you have run setNMProps.sh/cmd before starting node manager)
9. Login to Admin Console. Start the SOA & BAM servers.
Note: You must install WLS, Oracle SOA Suite in all the three machines. Make sure your MW_HOME & ORACLE_HOME path are same in all the three machines.
The following is the EDG guide link
http://download.oracle.com/docs/cd/E12839_01/core.1111/e12036/toc.htm
This is not the exact requirement for yours, but it will help you to understand the pack/unpack stuffs.

Error message deploying a composite in SOA Suite 11g

Hello,
We are attempting to deploy a composite to SOA Suite 11g (11.1.1.3). We're getting an 'Unable to register service' error message. When I inspect the log files I see the following entry as the first error:
Failed to retrieve policy[[
oracle.wsm.policyaccess.PolicyAccessException: WSM-06146 : Error deleting the attachment entries.
Anybody have any experience with this error? The error message reference has the following listed:
WSM-06146: Error deleting the attachment entries.
Cause: Failure occurred while deleting the attachment entries.
Action: Ensure that a valid list of policy subjects for deactivated lifecycle type is passed
Level: 32
Type: INCIDENT_ERROR
Impact: Configuration
I don't know how to "ensure that a valid list of policy subjects for deactivated lifecycle type is passed". Please help!!!!
Thanks,
jh

This is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM

OracleBAMAdapter Configuration problem in SOA suite 11g

Hi,
In Oracle SOA suite 11g(11.1.1.2.0), OracleBAMAdapter configuration using WebLogic server console is resulting in the following error
* An error occurred during activation of changes, please see the log for details.
* [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
Steps used for configuration:
1) Modify adapter configuration using navigation:: Deployments -> OracleBAMAdapter -> Configuration -> Outbound Connection Pools -> oracle.bam.adapter.adc.RMIConnectionFactory -> eis/bam/rmi
2) Specified connection properties with BAM server port details
HostName localhost
InstanceName ADCServer1
Password welcome1
PortNumber *9001*
UserName weblogic
In config.xml (%Domains%/soa_domain/config/) , I could see the following library entry
<library>
<name>[email protected]</name>
<target>AdminServer,soa_server1</target>
<source-path>K:\OracleFMW\Oracle_SOA/soa/modules/oracle.soa.workflow_11.1.1/oracle.soa.workflow.wc.jar</source-path>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</library>
Could you please help resolving this issue?
Regards
Naveen

I do not think that would qualify as a solution :-). I was negligient in deploying Work Flow Application, and was not deselecting the checkbox in 11.1.1.2.0 JDeveloper, which reads out like "Deploy to all the servers". Thus it was trying to deploy it to BAM server as well as the Admin Server. I had to deselect it. It's pretty mundane thing that I was missing.
Warm regards.

JANZ User Properties in SOA Suite 11G

Hi All,
I am trying to configure users in Oracle SOA Suite 11G to JANZ Realm . I am able to add user.
In documentation i see user property file present in this location "SOA_Oracle_Home\bpel\system\services\config\demo-users-properties.xml " , I don't have BPEL folder in SOA_SERVER1 , File available in 10G not in 11G.
Basically i am looking to set Manager to users which i define.
Users which i add in admin console are stored in WebLogin Embeded LDAP Server. I am able to see list of user by connecting server using LDAP Browser.
When i try to add manager attribute using LDAP Browser , it fails , record is not displayed in Jdeveloper .
Appreciate if your help in finding user properties or setting Manager role to the user. How can i add more attributes defined in documentation.
Regards
Vijay

Hi Siva,
I don't think still there is any support for PGP in Oracle SOA. You may use java for PGP encryption/decryption and transfer externally encoded messages over SFTP.
Please refer -
Re: PGP Encryption/Decryption
PGP Encryption in B2B
Regards,
Anuj

SOA Suite 11g HA install and EDNDataSource problem

Hi all,
We have installed and configured Oracle SOA Suite 11g (11.1.1.5) cluster per the instructions in the Enterprise Deployment Guide and Anthony Reynold's blog (http://blogs.oracle.com/reynolds/entry/installing_an_11g_soa_cluster). We are encountering constant XA and DBLocker related errors with the EDNDataSource:
<Dec 1, 2011 2:35:29 AM MST> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM DUAL" set up for pool "EDNDataSource" failed with exception: "oracle.jdbc.xa.OracleXAException".>
<Dec 1, 2011 2:35:29 AM MST> <Error> <oracle.soa.mediator.common.listener> <BEA-000000> <DBLocker caught exception while locking messages
java.lang.NullPointerException
at oracle.tip.mediator.common.error.ErrorDBLocker.lock(ErrorDBLocker.java:82)
at oracle.tip.mediator.common.listener.DBLocker.lockMessages(DBLocker.java:113)
at oracle.tip.mediator.common.listener.DBLocker.run(DBLocker.java:77)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
These errors occur every couple of seconds on both SOA hosts. Additionally, we see errors on one of the hosts, complaining about EDNDataSource not being clusterable:
<Dec 1, 2011 2:35:29 AM MST> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an object under the name weblogic.transaction.resources.SOA1.EDNDataSource_soa_domain in the JNDI tree. The object from -6284322550635925010S:soa11g-dev-1.domain.com:[8001,8001,-1,-1,-1,-1,-1]:soa11g-dev-1.domain.com,soa11g-dev-2.domain.com:soa_domain:SOA1 is non-clusterable, and you have tried to bind more than once from two or more servers. Such objects can only be deployed from one server.>
We have ensured that the database (we are using a single Oracle 11g database instance, not RAC) has XA support enabled. Beyond this, we haven't found any leads on this forum nor the Oracle support site (we have opened an SR with Oracle). I've seen a couple of other threads related to this issue over the last year (e.g., Re: JTA - XA Rources - Rollbacks reason and What is the purpose of EDNDataSource in SOA 11g? but no resolution was ever posted.
Does anyone have any suggestions of where to being looking to troubleshoot this issue? Any help would be most appreciated!
Thanks,
--Gary

How are you starting the server? Using start script - ./startManagedWebLogic.sh soa_server1? Make sure that classpath is getting set properly.Yes, after using the script to start the admin server.
How do I make sure the classpath is getting set properly? Seems to be the actual problem, but from the logs when the server starts up the command seems correct from what I can see. If I knew which jars contained the classes it needed I could try and look for them in the start command.
11g is not certified on Ubuntu. Please refer below link for certification matrix -I actually wished Oracle could certify the installers for Mac OSX (just for development), but I guess I could try and get things up on Redhat instead. :P
Thanks for the input.

Problems servicing EJB requests on SOA server. SOA Suite 11g.

Hi all
I recently installed SOA Suite 11g on my Windows 7 machine for a project that will be employing SOA, BPM and EJB services. I created a new SOA domain with an admin server and a managed SOA server. When creating the domain, I specified BPM Suite, SOA Suite, Enterprise manager, WSM Policy Manager and JRF to be included as per project requirements.
SOA and BPM project have been deployed to and are working fine on the SOA server, but I observed the following odd behaviour when I tried to deploy and use a Java EJB service: -
1. Via the admin console, I successfully deployed my EJB ear to the managed SOA server and can see it in the JNDI tree of the server.
2. When I try to invoke the EJB from a remote client, the service is successfully located via JNDI and a request is sent, but it is as though the service then simply swallows the request and does nothing with it. No output is returned from the EJB service and none of the logging from the EJB service appears in the logs. No errors are reported on the console or in any of the Weblogic logs that I have looked through.
3. I tried deploying the ear to the admin server instead and invoking it with the same client. This time it works absolutely fine.
4. When messing around with setDomainEnv.cmd, I accidentally removed jrf.jar from the classpath. When the SOA server subsequently started, this caused lots of errors while deploying the SOA components, but my EJB service worked with no problems on the SOA server. When I correcteed the classpath and restarted, the original problem returned.
It seems as though a conflict is occurring, which I am pretty baffled by. I would be very grateful for any advice or suggestions on this issue.
Many thanks
Jon

Hi Jon
I don't know the root cause of this issue. But try this and see if it works. Undeploy this EJB EAR application from weblogic admin console. Then Login into EM Console. And in EM Console, expand weblogic domain and select your soa server under this folder and right click and try to Deploy your EAR. And then access the EJB.
We have some BPM Applications where we have one Workflow project that we deploy from EM Console. This BPM App also have lots of EJB projects. We deploy all of them as single EAR from em console under weblogic domain. So far we have not faced any issues.
Thanks
Ravi Jegga

SOA Suite 11g Admin console EM link

Similar Messages

Maybe you are looking for