Soa Suite 11g DbAdapter invocation error message

Hi All,
Morning,...We are trying to make connection to Oracle 11g database using Db adapter in Soa 11g but getting this error message during invocation :
Database platform org.eclipse.persistence.platform.database.Database Platform is not supported ..An attempt was made to use an unsupported database platform
Steps mentioned here :
1.Creation of the Data Source - general tab:
Name: demo
JNDI Name: jdbc/demo
Under the Connection POOL tab : enter the url & also mention the driver class name : oracle.jdbc.OracleDriver, enter the user login details/pwd etc.
2.
Deployments --> DBAdapter --> Configuration --> outbound connection pools -- here created a new entry with Connection Factory name :javax.resource.cci.ConnectionFactory
JNDI NAME : eis/DB/demo --> Then SAVE it.
Now click this JNDI entry again created in Step # 2 above --> Properties tab -->
enter the dataSourceName : jdbc/demo
platformClassName : Now could someone please let us know what exactly do we need to mention here ?_
Currently this value is null/blank, could this be the reason why we are getting this error message and how could we resolve this ..
With Regards

Hi,
Put the jdbc/demo under xADataSourceName.
The value for platformClassName is: org.eclipse.persistence.platform.database.Oracle10Platform
After each value you enter, press ENTER. In the end save.
Don't forget to redeploy the DbAdapter - check this box under deployment and press the update button.
Arik

Similar Messages

Error message deploying a composite in SOA Suite 11g

Hello,
We are attempting to deploy a composite to SOA Suite 11g (11.1.1.3). We're getting an 'Unable to register service' error message. When I inspect the log files I see the following entry as the first error:
Failed to retrieve policy[[
oracle.wsm.policyaccess.PolicyAccessException: WSM-06146 : Error deleting the attachment entries.
Anybody have any experience with this error? The error message reference has the following listed:
WSM-06146: Error deleting the attachment entries.
Cause: Failure occurred while deleting the attachment entries.
Action: Ensure that a valid list of policy subjects for deactivated lifecycle type is passed
Level: 32
Type: INCIDENT_ERROR
Impact: Configuration
I don't know how to "ensure that a valid list of policy subjects for deactivated lifecycle type is passed". Please help!!!!
Thanks,
jh

This is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM

Error deploying BPEL process on SOA Suite 11g

Hi,
We have installed SOA Suite 11g (Weblogic 10.3.1.0) on Windows.
I'm trying to deploy a simple BPEL Process on this SOA Suite through JDeveloper 11.1.1.1.0 Studio.
However I'm getting the following error:
[10:29:08 AM] Preparing to send HTTP request for deployment
[10:29:09 AM] Creating HTTP connection to host:172.26.0.119, port:8001
[10:29:09 AM] Sending internal deployment descriptor
[10:29:09 AM] Sending archive - sca_BPELTest_rev1.0.jar
[10:30:37 AM] Received HTTP response from the server, response code=503
[10:30:37 AM] Problem in sending HTTP request to the server. Check standard HTTP response code for 503
[10:30:37 AM] Error deploying archive sca_BPELTest_rev1.0.jar to soa_server1 [172.26.0.119:8001]
[10:30:37 AM] HTTP error code returned [503]
[10:30:37 AM] No error message is returned from the server.
[10:30:37 AM] #### Deployment incomplete. ####
[10:30:37 AM] Error deploying archive file:/D:/JDeveloper/mywork/Application2/Project1/deploy/sca_BPELTest_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Please let me know in case anybody has faced this issue.
Thanks,
Makrand

Hi, it´s a little late, but it may help to someone else.
I just got the same error on deployment and realized i was going through a proxy server, who was responding with a http 503 code to deployment request from JDeveloper. Just check your proxy settings under Tools->Preferences->Web Browser and proxy and add an exception if needed.
I also had to restart JDeveloper (a bug?) after adding the exception to correct the issue.
regards,
Pedro.

Error while starting the AqAdapter in SOA Suite 11g Admin Console

facing an issue with the AqAdapter(Resource Adapter) in Soa Suite 11g Admin Console.
we go to Deployments --> Select Aq Adapter --> Currently it shows the status as Prepared
Now we try to Start it again --> it comes back with the error message mentioned below
weblogic.application.ModuleException: weblogic.connector.exception.RAException:
Jndi Name is null or empty. Errors were encountered while performing this operation.
source path on the admin server is mentioned here for this AqAdapter:
/opt101/app/oracle/SOAD/SOA11gR1/fmw/Oracle_SOA1/soa/connectors/AqAdapter.rar
deployment plan :
/opt101/app/oracle/SOAD/SOA11gR1/fmw/Oracle_SOA1/soa/connectors/was/Plan. xml
We check in the Configuration tab --> Outbound Connection Pools -->
here it shows the Group as javax.resource.cci.ConnectionFactory and under it we have setup
2 connection pool instances with JNDI names as : eis/AQ/aqSample & eis/aq/B2BAQ
Could someone please help here as to what could be the reason why this error is coming and
how we could resolve this.
With Regards & thanks

This is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM

Error While Installation of SOA SUITE 11g

Hi
I am installing SOA SUITE 11g on Oracle Linux 4.
I have already installed Oracle database 11g
I have installed Weblogic server 10.3.x
I have checked oracle database , i am able to run it successfully.
I have checked weblogic server too, its too running successfully.
I have logged into server as *"oracle" user* and trying to run runInstaller from command prompt
the trace for error getting generated is below. plz let me know where i am making mistake.
I am new to SOA SUITE n related technologies..
++[oracle@localhost ~]$ cd SOA_SUITE/Disk1++
++[oracle@localhost Disk1]$ ls++
++doc install runInstaller setup.exe stage++
++[oracle@localhost Disk1]$ ./runInstaller++
++Starting Oracle Universal Installer...++
++Checking if CPU speed is above 300 MHz. Actual 1992 MHz Passed++
++Checking Temp space: must be greater than 150 MB. Actual 233511 MB Passed++
++Checking swap space: must be greater than 500 MB. Actual 5023 MB Passed++
++Checking monitor: must be configured to display at least 256 colors++
++>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<++
++Some requirement checks failed. You must fulfill these requirements before++
++continuing with the installation,++
++Continue? (y/n) [n] y++
++>>> Ignoring required pre-requisite failures. Continuing...++
++Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-02-23_05-49-23PM. Please wait ...++
++Please specify JRE/JDK location ( Ex. /home/jre ), <location>/bin/java should exist :++
++Please specify a valid JRE/JDK location :/root/Oracle/Middleware/jdk160_14_R27.6.5-32++
++Please specify a valid JRE/JDK location :++
I am trying to give JRE/JDK location which i got when i was installing weblogic server but its not accepting that and i am getting
"Please specify a valid JRE/JDK location : " message again.
Please let me know how i can i get out of this error.
Thanks
vishnu kumar

Hi,
check for some spaces or character which might be going while you specify the JRE locations, alternatively you can call runInstaller with
-jreLoc ,i.e;have the path in the cmd.
./runInstaller -jreLoc /root/Oracle/Middleware/jdk160_14_R27.6.5-32
which should work.
regards,
Jitendra

SOA Suite 11g Clustering error/oracle bug ?

Hi, i got several experiment to implement soa suite 11g clustering, in my company.. at this moment we still use development mode in our application server. now i'm trying to get into production and also i want cluster the server.. here is the chronology what i do.
i got 3 server :
my plan is
server #1 become an proxy server, let say the name is soa_proxy
server #2 become an cluster node, let say the name is soa_server1
server #3 become an cluster node, let say the name is soa_server2
so i start install & configure it (applications is running under Windows Server 2003)
1.*soa_proxy*
- Installing WebLogic server
- Installing SOA
- Create Repository with RCU (oracle 10g database)
2.*soa_server1*
- Installing WebLogic server
- Installing SOA
3.*soa_server2*
- Installing WebLogic server
- Installing SOA
after installation finished, then i create domain in soa_proxy server let say it name 'MyDomain', then i assign the soa_server1 and soa_server2 in cluster node named 'MyCluster', also i assign the soa_proxy server as a HTTP Proxy Server.. i'm following the instructions just like this link Link: [http://download.oracle.com/docs/cd/E12839_01/doc.1111/e13925/config_screens.htm#CJAEABGD]
all the installation seems good, but when i try to deploy my composite application into the proxy server 'soa_proxy' with JDev, i got error like this
Image: !http://img9.imageshack.us/img9/2122/error2z.jpg!
and when i go to Http://hostname:7001/em
i just see my composite deployed only in 'soa_server2'.
UPDATE : well, now the error was gone when deploying. but we still got little odd result,
when i deploy with jdev, it still fine, until i go to the enterprise manager. yess still.. my composite only deplyed in 'soa_server1'. i got some reference that we can copy the domain directory in soa_proxy and then paste into the server that not yet been deployed before. its seems oke..
i've been thinking, how if i got 10 node of cluster? 50 node of cluster ? should i copy the directory just like that ?? is there another charmed way to do it???
can somebody help me with this simple case?
regards
Wildan
Edited by: wildsoft on Feb 12, 2010 11:33 AM
=======
here is my last trial to deploy the cluster environment, then i just got the same issues, our team here think thats the issues causing by oracle bug in code behind. for reminder what i do last experiment
1. we deploy/configure the domain (admin console,cluster node) then starting up all the services smoothly without no issues & as we saw in the console monitor we can see the cluster is syncronizing.
2. then we create simple composite.
3. we try to deploy the composite to the cluster domain, and what we got is the composite only deployed in one cluster node.
let me describe to clear it,
* first trial, when we deploy the composite, here is what we got in em console
*[-] SoaInfra (SoaServer1)*
[+] CompositeLabTest
*[-] SoaInfra (SoaServer2)*
in JDev we also saw this message (the project CompositeLabTest Deploy Process is skipped), some kind like that
* second time trial, we try to shut the SoaServer2 down, then restart it, what we got in em console
*[-] SoaInfra (SoaServer1)*
[+] CompositeLabTest
*[-] SoaInfra (SoaServer2)*
[+] CompositeLabTest
. so until today my soa suite 11g clustering experience is never going good practice.. any of you may had experience with clustering too, how that can be done? please respon...
thanks
regards
Wildan Abdat
Edited by: wildsoft on Apr 27, 2010 4:08 PM
Edited by: wildsoft on Apr 27, 2010 4:13 PM

Hi there.
Me too I have a similar problem with cluster deployment.
I have two different domains in two different phisical machine on the same LAN.
These domains are equals and the sole difference is regarding the IP configuration:
domain 1
machine 172.0.0.1
soaadmin 172.0.0.1
soa1 172.0.0.2
soa1 172.0.0.3
domain 2
machine 172.0.1.1
soaadmin 172.0.1.1
soa1 172.0.1.2
soa1 172.0.1.3
When I try to deploy a new composite from the EM this fails (it remains in waiting for a response like the followed)
<Jun 18, 2010 10:42:00 AM CEST> <Warning> <org.apache.myfaces.trinidadinternal.context.RequestContextImpl> <BEA-000000> <Could not find partial trigger idArchiveFileBrowserDialog from RichInputText[UIXEditableFacesBeanImpl, id=idArchiveLoc]>
Processing sar=/tmp/dir2448127768139530528tmp/sca_SOAComposite1_rev1.0.jar
Adding sar file - /tmp/dir2448127768139530528tmp/sca_SOAComposite1_rev1.0.jar
Creating HTTP connection to host:172.0.0.2, port:10002
What I checked:
In multicast configuration soa1 (domain1) sent the request to all soa servers in the LAN (even in that one that aren't configurated in his domain)
In unicast configuration soa1 (domain1) sent the request only to the soa2 (domain1) server but it remain in waiting for a response for all the time.
What it is strange is that if I stop the domain2 the request can be performed and my composite is deployed in both the servers.
Any idea about this strange behaviour?
N.B.
I'm not using Coherence.

Errors installing SOA Suite 11g

Good morning
This is an odd error. I am installing a brand new environment for SOA-SUITE 11g on a test database before going through the pain to complete this in our development environment. I am using RCU to build the environment as instructed and am allowing RCU to handle everything but constructing the schemas. I have created the schemas manually via SQL*Plus.
This process has worked in the past so I'm at a loss for explaining these errors. In creating the SOAINFRA, I am receving the following errors:
ORA-60019: Creating initial extent of size 14 in tablespace of extent size 13
ORA-06512: at "SYS.DBMS_AQADM", line 81
ORA-06512: at line 2
JDBC SQLException handled by error handler
2012-06-08 09:09:30.929 rcu:Extracting Statement from File Name: 'D:\rcuHome\rcu\integration\soainfra\sql\fabric\createschema_edndb_oracle.sql'Line Number: 157
2012-06-08 09:09:30.929 rcu:Extracted SQL Statement: [begin
DBMS_AQADM.create_queue_table(queue_table=>'edn_oaoo_delivery_table', queue_payload_type=>'edn_oaoo_delivery',
multiple_consumers=>TRUE);
DBMS_AQADM.create_queue(queue_name=>'edn_oaoo_queue', queue_table=>'edn_oaoo_delivery_table');
DBMS_AQADM.start_queue(queue_name=>'edn_oaoo_queue');
end;
2012-06-08 09:09:30.929 rcu:Statement Type: 'BEGIN/END Anonymous Block'
JDBC SQLException - ErrorCode: 60019SQLState:99999 Message: ORA-60019: Creating initial extent of size 14 in tablespace of extent size 13
ORA-06512: at "SYS.DBMS_AQADM", line 81
ORA-06512: at line 2
JDBC SQLException handled by error handler
2012-06-08 09:09:35.547 rcu:Extracting Statement from File Name: 'D:\rcuHome\rcu\integration\soainfra\sql\fabric\createschema_edndb_oracle.sql'Line Number: 167
2012-06-08 09:09:35.547 rcu:Extracted SQL Statement: [declare
sub sys.aq$_agent;
begin
sub := sys.aq$_agent('edn_java_subscriber', NULL, NULL);
DBMS_AQADM.add_subscriber(queue_name=>'edn_event_queue', subscriber=>sub);
end;
2012-06-08 09:09:35.547 rcu:Statement Type: 'BEGIN/END Anonymous Block'
JDBC SQLException - ErrorCode: 24010SQLState:99999 Message: ORA-24010: QUEUE EDN_EVENT_QUEUE does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 6268
ORA-06512: at "SYS.DBMS_AQADM", line 364
ORA-06512: at line 5
JDBC SQLException handled by error handler
2012-06-08 09:09:35.781 rcu:Extracting Statement from File Name: 'D:\rcuHome\rcu\integration\soainfra\sql\fabric\createschema_edndb_oracle.sql'Line Number: 174
2012-06-08 09:09:35.781 rcu:Extracted SQL Statement: [declare
sub sys.aq$_agent;
begin
sub := sys.aq$_agent('edn_oaoo_subscriber', NULL, NULL);
DBMS_AQADM.add_subscriber(queue_name=>'edn_oaoo_queue', subscriber=>sub);
end;
2012-06-08 09:09:35.781 rcu:Statement Type: 'BEGIN/END Anonymous Block'
JDBC SQLException - ErrorCode: 24010SQLState:99999 Message: ORA-24010: QUEUE EDN_OAOO_QUEUE does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 6268
ORA-06512: at "SYS.DBMS_AQADM", line 364
ORA-06512: at line 5
JDBC SQLException handled by error handler
Now, I thought this was a tablespace space issue but here is a report on the status of all tablespaces.
Free Space Layout
Total Max Total
Number Free Free Available
Tablespace of Space Space Space Percent
Name Fragments (Meg) (Meg) (Meg) Free
EXAMPLE 3 36 33 346 10.271
SOA_SUITE_DATA_01 1 101 101 101 99.853
SOA_SUITE_DATA_02 1 101 101 101 99.853
SYSAUX 114 560 500 1,161 48.272
SYSTEM 2 503 499 1,241 40.532
UNDOTBS1 18 40 21 105 37.917
USERS 2 101 100 106 95.224
I even granted RESOURCE in case the tool needed UNLIMITED TABLESPACE.
Does anyone have any ideas here? Any help would be greatly appreciated
Stephen Karniotis

Hi Stephen
"I am using RCU to build the environment as instructed and am allowing RCU to handle everything but constructing the schemas. I have created the schemas manually via SQL*Plus"
Do you mean you are not running RCU utility command from D:\rcuHome\bin\rcu.cmd folder ? As far as I know, this is the supported and easiest way to create any Schemas for any SOA Middleware product like SOA, BPM, OBIEE, ODI, WebCenter etc etc. I am not sure if directly running sql scripts will work and if its possible also.
I would prefer running rcu.cmd command and provide Database SYS username, password with db details like db host, port, sid. Incase if db credentials are secret and not given to you, simply ask that DB Adminstrator to run this RCU command. Just unzip this file and run rcu.cmd and provide all the details. This do NOT need any other thing at all. Its pretty straight forward.
RCU command takes care of all the things. Create tablespaces, schemas, then create all the stuff inicluding tables, sequeneces, packages and compile them also.
Finally if you use Oracle XE 10g Edition, run one line to set this value before you run rcu.cmd -> set RCU_JDBC_TRIM_BLOCKS=TRUE
Thanks
Ravi Jegga

Composite application deployment error : SOA SUITE 11g

when trying to deploy a composite application to soa suite 11g, below error is occured. I read related threads on forum, then tried and checked everthing mentioned on them. but no luck, the problem is still the same.
i am using Ubuntu 9.1, and installation order is weblogic server-rcu drop then create DB schemas-install soa suite by defining new domain. I also checked administrator user and newly created user which is assigned as SOAAdmin and SOAOperator.
could anyone help on the same please?
the last success messages ::
MDS-10014 - import is completed. Total number of documents successfully processed : 19, total number of documents failed : 0.
SOA-21045 - Calling coordinator to deploy default/Helloworld!1.0*f3bec318-d208-435d-bba7-86a496eec86c, with isForceDefault flag: true
then failure messages ::
WSM-06108 - Error initializing the Oracle WSM Policy Resolver because incorrect configuration is passed: {0} {1}.
OWS-00532 - Failed to retrieve policy
SOA-20003 - Unable to register service.
SOA-21037 - Sending back error message: Error during deployment: Deployment Failed: Unable to register service...

the solution is given below
http://blogs.eteration.com/blog/?p=365

Message Ordering or Singlton Service in SOA Suite 11g

In SOA Suite 10g, JMS Adapter could behaviors as Singleton instance by setting the properties "XclusterGroupId".
In addition, set Routing Service to be Synchronous execution, therefore only one instance consuming the Target message queue sequentially.
Does this properties still take effect in SOA Suite 11g, as I didn't find this properties being mentioned through Adapter Technology documentations?
Otherwise are there any other solutions for the Message Ordering?
Thank you in advance.
-Simon
Edited by: user8408910 on Jul 13, 2009 1:31 AM

Is it the same answer for JMS topic listeners? i.e. each new message on the topic should be processed once and only once by a Composite deployed to a cluster with >1 server instances.
Thanks for info,
Todd

Error invoking Oracle Application Adapter part of SOA Suite 11g

We are using Oracle application adapter from BPEL process manager ( SOA Suite 11g) to call PLSQL:OE_ORDER_PUB:PROCESS_ORDER (EBS R12).
The call returns error : "<ns0:X_MSG_DATA
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="">FND
FND_AS_UNEXPECTED_ERROR N PKG_NAME OE_Order_PVT N PROCEDURE_NAME Lines N
ERROR_TEXT ORA-06502: PL/SQL: numeric or value error: NULL index table key
value </ns0:X_MSG_DATA>"
The same order gets created from PLSQL but fails while trying from BPEL through Oracle APPS adapter. The dbg file at the EBS end is given below:
Session Id:5695950
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PUB.PROCESS_ORDER
LEAVING OE_MSG_PUB.INITIALIZE
ENTER PROCESS_ORDER_AG
BEFORE HEADER PROCESSING
HEADER_ID22020
OPERATIONCREATE
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER
OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
OPERATION = CREATE SO SET OLD TO NULL
Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
ENTER OE_HEADER_SECURITY.ATTRIBUTES
VALIDATE ATTRIBUTES
Entering OE_VALIDATE_HEADER.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
Entering OE_ORDER_CACHE.LOAD_Payment_Term
Exiting OE_ORDER_CACHE.LOAD_Payment_Term
Entering OE_ORDER_CACHE.LOAD_PRICE_LIST
Exiting OE_ORDER_CACHE.LOAD_PRICE_LIST
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_HEADER.ATTRIBUTES
DEFAULT MISSING
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value fetched from table.
PARAMETER VALUE:
In OE_Contracts_util.check_license
performing check first time, lx_status: I
l_sales_contracts_enabled: N
SET CODE
AFTER SET CODE
Enter get_freight_carrier()
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Querying the table for the AR details ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
AFTER DEFAULT MISSING
APPLY ATTRIBUTE CHANGES
Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
Raj1
Raj2
Raj3
Raj4
before getting payment count
Exiting OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
ENTER OE_HEADER_SECURITY.ENTITY
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for AUDIT_TRAIL_ENABLE_FLAG
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
VALUE FROM DBE
Parameter value fetched from table.
PARAMETER VALUE: E
ENTER OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , COLUMN:
EXIT OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , RESULT:0
EXIT OE_HEADER_SECURITY.ENTITY
Entering OR_HEADER_UTIL.Pre_Write_Process
No prepayments for the order
Entering OE_HEADER_UTIL.Get_Order_Number
Entering OE_HEADER_UTIL.Get_Order_Number
Ordertype is :1087
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Getting the AR details from the cache ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
before calling get_seq_info
Category Code1087
Set of Books2021
after calling get_seq_info
fndseqresult0
fndseqtype1017
p_old_header_rec.order_number:
p_old_header_rec.transaction_phase_code:
Exiting OR_HEADER_UTIL.Get_Order_Number
Exiting OR_HEADER_UTIL.Pre_Write_Process
WRITE TO DB
Entering OE_HEADER_UTIL.INSERT_ROW
ENTERING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
UI FLAG IS FALSE
CODE_RELEASE_LEVEL=120004
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
P_HEADER_ID=22020
P_HEADER_REC.HEADER_ID=22020
OD GLOBAL HEADER_ID= 22020
NEW GLOBAL HEADER_ID= 22020
EXITING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
returned index is: 1
Exiting OE_HEADER_UTIL.INSERT_ROW
Entering OE_HEADER_UTIL.Post_Write_Process
ENTER SET RECURSION MODE
ENTITY CODE-11
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Entering Procedure Process_Request_Pvt
Request type DFLT_HSCREDIT_FOR_SREP
Entering OE_DELAYED_REQUESTS_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
ENTERING OE_HEADER_SCREDIT_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
ENTER SET RECURSION MODE
ENTITY CODE-4
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER_SCREDITS
ENTER OE_HEADER_SCREDIT_SECURITY.ATTRIBUTES
Entering OE_VALIDATE_Header_Scredits.Attributes
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_Header_Scredits.Attributes
Entering OE_VALIDATE_Header_Scredits.Entity
Entering OE_VALIDATE_Header_Scredits.Duplicate_salescredit
Exiting OE_VALIDATE_Header_Scredits.Duplicate_salescredit
Exiting OE_VALIDATE_Header_Scredits.Entity
ENTER OE_HEADER_SCREDIT_SECURITY.ENTITY
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for AUDIT_TRAIL_ENABLE_FLAG
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: E
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
ENTER OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , COLUMN:
EXIT OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , RESULT:0
EXIT OE_HEADER_SCREDIT_SECURITY.ENTITY
ENTERING OE_HEADER_SCREDIT_UTIL.INSERT_ROW
ENTERING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
UI FLAG IS FALSE
CODE_RELEASE_LEVEL=120004
P_HDR_SCR_ID=64168
ENTERING OE_ORDER_UTIL.RETURN_GLB_ENT_INDEX
EXITING OE_ORDER_UTIL.RETURN_GLB_ENT_INDEX
INDEX=641680001
L_RETURN_STATUS =S
L_RESULT =F
OLD SCR_ID 64168
NEW SCR_ID64168
EXITING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
RETURNED INDEX IS: 641680001
EXITING OE_HEADER_SCREDIT_UTIL.INSERT_ROW
EXITING OE_ORDER_PVT.HEADER_SCREDITS
ENTER SET RECURSION MODE
ENTITY CODE-4
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
EXITING OE_HEADER_SCREDIT_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
Exiting OE_DELAYED_REQUESTS_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
leaving Process_Request_Pvt
ENTER SET RECURSION MODE
ENTITY CODE-11
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
leaving process_requenst_for_reqtype
Before calling eval_post_write_header in HEADER Post Write
ENTERING EVAL_POST_WRITE_HEADER
M_HOLD_ENTITY_CODE/M_HOLD_ENTITY_ID:C/13489
RETRIEVING NEW HOLD SOURCE RECORD
HOLD SOURCE RECORD NOT FOUND , EXITING
EXITING EVAL_POST_WRITE_HEADER
After calling eval_post_write_header in HEADER Post Write
Before calling OE_SCHEDULE_UTIL
ENTERING INSERT_INTO_MTL_SALES_ORDERS
CALLING INVS CREATE_SALESORDER
ORDER TYPE: Cochin Order
SOURCE CODE: ORDER ENTRY
ORDER NUMBER : 1017
L_MSG_COUNT
RETURN STATUS S
EXITING INSERT_INTO_MTL_SALES_ORDERS
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_HEADER_UTIL.Post_Write_Process
EXITING OE_ORDER_PVT.HEADER
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
AFTER HEADER PROCESSING HEADER_ID = 22020
AFTER HEADER_ADJS PROCESSING
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
AFTER HEADER_PRICE_ATTS PROCESSING
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
Entering Procedure Process_Request_Pvt
Request type CHECK_HSC_QUOTA_TOTAL
Entering OE_DELAYED_REQUESTS_UTIL.VALIDATE_HSC_QUOTA_TOTAL
Entering OE_VALIDATE_Header_Scredits.Validate_HSC_QUOTA_TOTAL
Exiting OE_VALIDATE_Header_Scredits.Validate_HSC_QUOTA_TOTAL
Exiting OE_DELAYED_REQUESTS_UTIL.VALIDATE_HSC_QUOTA_TOTAL
leaving Process_Request_Pvt
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
BEFORE LINES PROCESSING
ENTER SET RECURSION MODE
ENTITY CODE-5
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Entering OE_ORDER_PVT.LINES 1: 15-OCT-09 18:31:47
---------LOOPING FOR NTH TIME N= 1
OPERATION = CREATE SO SETTING OLD TO NULL
Entering OE_LINE_UTIL.CONVERT_MISS_TO_NULL
outside margin convert miss to null
inside margin convert miss to null
Exiting OE_LINE_UTIL.CONVERT_MISS_TO_NULL
AT LINE LEVEL HEADER_ID22020
Entering OE_HEADER_UTIL.LOCK_ROW
Entering OE_HEADER_UTIL.QUERY_ROW
Before caching OE_HEADER_UTIL.QUERY_ROW
Exiting OE_HEADER_UTIL.QUERY_ROW
selected for update, now compare
STANDARD LINE
L_MODE IS MODELS_AND_STANDARD
0
STARTING LINE LOOP. HEADER_ID = 22020
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
VALUE FROM DB83
Parameter value fetched from table.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 9.990000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E+125
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
querying item from mtl_system_items
querying based on ship_from_org
Exiting OE_ORDER_CACHE.LOAD_ITEM
Dual_uom_control is FALSE
CHECK ATTRIBUTES SECURITY
Enter OE_LINE_Security.Attributes
ATTRIBUTE VALIDATION
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Enter procedure OE_validate_line.Attributes
Header has got created in the same call
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Entering OE_ORDER_CACHE.LOAD_LINE_TYPE
p_key is not null
before selecting line_type info : G_MISS_CHAR
after selecting line_type info : G_MISS_CHAR
tax_flag :
Exiting OE_ORDER_CACHE.LOAD_LINE_TYPE
Checking for Ship Dates....
Checking for Arival Dates....
item_relationship_type :
preferred_grade:
Exiting procedure OE_validate_line.Attributes
AFTER ATTRIBUTE VALIDATION
DEFAULT MISSING
ENTER OE_DEFAULT_LINE.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
IN DEFAULTING: FUNCTION GET_ITEM_TYPE
THE INV ITEM IS5429
line_category_code = ORDER
retrobill_request_id =
item_type_code =
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
CALLING GET_SMC
DEFAULTING SMC FLAG
GET SMC: TOP MODEL LINE ID :
CALLING GET_ATO
IN GET_ATO_LINE , ITEM_TYPE_CODE :STANDARD
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
GET_ATO_LINE: NY
RETURN ATO_LINE_ID AS NULL
ENTERING MODEL_OPTION_DEFAULTING
LINE_ID TO DEFAULT:
IB Owner:
IB Install:
IB Current:
Entering OE_CONFIG_TSO_PVT.Is_Part_of_Container_Model..: 15-OCT-09 18:31:47
Line Id :
Top Model Line id:
ATO Line id:
operation :
inv item : 5429
Inventory Item id:5429
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
BOM Item Type:4
Replenish to Order:N
Config Model Type:
Top Container Model?:N
Part of Container Model?:N
Exiting OE_CONFIG_TSO_PVT.Is_Part_Of_Container_Model..: 15-OCT-09 18:31:47
RETURNING FOR ITEM TYPE MODEL AND STANDARD
TOLERANCE BELOW :
TOLERANCE BELOW :
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE:
Before Defaulting P_Qty and P_Qty_Uom Values:
Pricing Qty: 20
Pricing UOM:
Ordered Qty: 20
Ordered UOM: EA
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
Dual_uom_control is FALSE
SHIP FROM OR SHIP METHOD IS NULL/MISSING
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
CALLING GET SHIPPABLE_FLAG
1 , ATO_LINE_ID:
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
SHIPPABLE FLAG: Y
SETTING RE_SOURCE_FLAG TO N
EXIT OE_DEFAULT_LINE.ATTRIBUTES
APPLY ATTRIBUTE CHANGES
Entering OE_LINE_UTIL.APPLY_ATTRIBUTE_CHANGES
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Entering OE_ORDER_CACHE.GET_TAX_CALCULATION_FLAG
Entering OE_ORDER_CACHE.LOAD_LINE_TYPE
p_key is not null
Exiting OE_ORDER_CACHE.LOAD_LINE_TYPE
ENTER RETURN_LINE
EXIT , THIS IS A REGULAR LINE
Entering OE_ORDER_CACHE.LOAD_CUST_TRX_TYPE
Exiting OE_ORDER_CACHE.LOAD_CUST_TRX_TYPE
Exiting OE_ORDER_CACHE.GET_TAX_CALCULATION_FLAG
Entering OE_ORDER_CACHE.Enforce_List_price
Exiting OE_ORDER_CACHE.Enforce_List_price
old calculate price flag G_MISS_CHAR
new calculate price flagY
Freeze method is :BOOKING
FTE IS NOT INSTALLED!
OE_GLOBALS.G_PRICING_RECURSION:N
Entering OE_LINE_UTIL.UPDATE_ADJUSTMENT_FLAGS
New Item, dont have to do anything
Exiting OE_LINE_UTIL.UPDATE_ADJUSTMENT_FLAGS
Freeze method is :BOOKING
FTE IS NOT INSTALLED!
FTE IS NOT INSTALLED!
Ordered Qty has changed
New Ordered Qty : 20
Old Ordered Qty :
Freeze method is :BOOKING
B2315926_2:
FTE IS NOT INSTALLED!
FTE IS NOT INSTALLED!
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
Dual_uom_control is FALSE
FTE IS NOT INSTALLED!
FTE IS NOT INSTALLED!
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for ENABLE_FULFILLMENT_ACCEPTANCE
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value fetched from table.
PARAMETER VALUE:
CSH --OUT of l_copy_service_field condition
LEAVING OE_MSG_PUB.ADD
ENTER SET RECURSION MODE
ENTITY CODE-5
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST12
ENTERING DELETE_ATTRIBUTE_CHANGES -1
LEAVING OE_MSG_PUB.COUNT_AND_GET 1
Entering OE_HEADER_UTIL.GET_VALUES
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
Exiting OE_HEADER_UTIL.GET_VALUES
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PUB.PROCESS_ORDER
LEAVING OE_MSG_PUB.INITIALIZE
ENTER PROCESS_ORDER_AG
BEFORE HEADER PROCESSING
HEADER_ID
OPERATIONCREATE
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER
OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
OPERATION = CREATE SO SET OLD TO NULL
Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
ENTER OE_HEADER_SECURITY.ATTRIBUTES
VALIDATE ATTRIBUTES
Entering OE_VALIDATE_HEADER.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
Entering OE_ORDER_CACHE.LOAD_Payment_Term
Exiting OE_ORDER_CACHE.LOAD_Payment_Term
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_HEADER.ATTRIBUTES
DEFAULT MISSING
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE:
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
SET CODE
AFTER SET CODE
Enter get_freight_carrier()
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Getting the AR details from the cache ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
AFTER DEFAULT MISSING
APPLY ATTRIBUTE CHANGES
Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
Raj1
Raj2
LEAVING OE_MSG_PUB.ADD
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST2
ENTERING DELETE_ATTRIBUTE_CHANGES -1
PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST12
ENTERING DELETE_ATTRIBUTE_CHANGES -1
LEAVING OE_MSG_PUB.COUNT_AND_GET 1
Entering OE_HEADER_UTIL.GET_VALUES
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
Exiting OE_HEADER_UTIL.GET_VALUES
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Entering OE_HEADER_UTIL.GET_IDS
LEAVING OE_MSG_PUB.ADD
Exiting OE_HEADER_UTIL.GET_IDS
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PUB.PROCESS_ORDER
LEAVING OE_MSG_PUB.INITIALIZE
ENTER PROCESS_ORDER_AG
BEFORE HEADER PROCESSING
HEADER_ID
OPERATIONCREATE
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER
OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
OPERATION = CREATE SO SET OLD TO NULL
Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
ENTER OE_HEADER_SECURITY.ATTRIBUTES
VALIDATE ATTRIBUTES
Entering OE_VALIDATE_HEADER.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
Entering OE_ORDER_CACHE.LOAD_Payment_Term
Exiting OE_ORDER_CACHE.LOAD_Payment_Term
Entering OE_ORDER_CACHE.LOAD_PRICE_LIST
Exiting OE_ORDER_CACHE.LOAD_PRICE_LIST
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_HEADER.ATTRIBUTES
DEFAULT MISSING
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE:
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
SET CODE
AFTER SET CODE
Enter get_freight_carrier()
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Getting the AR details from the cache ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
AFTER DEFAULT MISSING
APPLY ATTRIBUTE CHANGES
Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
Raj1
Raj2
LEAVING OE_MSG_PUB.ADD
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST2
ENTERING DELETE_ATTRIBUTE_CHANGES -1
PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST12
ENTERING DELETE_ATTRIBUTE_CHANGES -1
LEAVING OE_MSG_PUB.COUNT_AND_GET 1
Entering OE_HEADER_UTIL.GET_VALUES
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
Exiting OE_HEADER_UTIL.GET_VALUES
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Request help.
Thank you
Vijosh
Edited by: user8690315 on Oct 20, 2009 12:19 AM

Hi,
I am also same problem while creating the Sales Order.
Did you find any solution for this problem??
Thanks,
-- Eric.

Error using OSR10g with SOA Suite 11g

Hi,
I'm trying to configure a web service adapter in Jdev 11.1.1.2 in order to use the OSR (10g) to dinamically resolve the WSDL location and SOAP endpoint, but I always get an error like this:
Exception: WSDLException: faultCode=PARSER_ERROR: Failed to read wsdl file at: "orauddi:/uddi:8955c1d0-0b55-11e1-b90e-7b4aa540b908", caused by: oracle.fabric.common.uddiurl.resolver.exception.SRKeyNotFoundException:
<dispositionReport xmlns="urn:uddi-org:api_v3">
    <result errno="10210">
        <errInfo errCode="E_invalidKeyPassed">Cannot find BusinessService with key orauddi:/uddi:8955c1d0-0b55-11e1-b90e-7b4aa540b908 !</errInfo>
    </result>
</dispositionReport>The service is correctly published in registry, even its reachable from the UDDI Registry Resource Palette in JDEV.
The same service published in a OSR 11g is invoked correctly, but I can't solve the proble for the OSR 10g.
I found some documentation about migrating and it says that the SOA Suite 10g uses UDDI standar but the 11g Suite uses orauddi.... so, not standard??, is there a way to integrate SOA Suite 11g with OSR 10g??

Hi,
check for some spaces or character which might be going while you specify the JRE locations, alternatively you can call runInstaller with
-jreLoc ,i.e;have the path in the cmd.
./runInstaller -jreLoc /root/Oracle/Middleware/jdk160_14_R27.6.5-32
which should work.
regards,
Jitendra

Oracle SOA Suite 11g Human TaskFlow JDeveloper Deployment Error

Hi,
I am getting the following error in JDeveloper (11.1.1.3.0) while deploying a Human TaskFlow application in Oracle SOA Suite 11g (SOA server instance). I generated the task flow application in JDeveloper from Human Task component of the BPEL process. I am able to deploy and run BPEL Process successfully in the SOA server.
ERROR: No j2ee modules detected in EAR archive. Deployment aborted. == (oracle.jdeveloper.deploy.VetoableDeployException)

I am getting the previous error (no J2EE module found in EAR) while deploying the taskflow from Application > Deploy menu.
If I try to deploy the Takflow application from Taskflow application context menu / project menu, I am getting the following error:
[01:02:48 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ApprovePOTaskDetails on soa_server1.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
[01:02:48 PM] [Deployer:149193]Operation 'deploy' on application 'ApprovePOTaskDetails' has failed on 'soa_server1'
[01:02:48 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ApprovePOTaskDetails on soa_server1.: Failed to load webapp: 'ApprovePOTaskDetails.war'.
[01:02:48 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'ApprovePOTaskDetails.war'
[01:02:48 PM] Caused by: java.lang.ClassNotFoundException: oracle.adf.library.webapp.ResourceServlet
[01:02:48 PM] See server logs or server console for more details.
[01:02:48 PM] weblogic.application.ModuleException: Failed to load webapp: 'ApprovePOTaskDetails.war'
[01:02:48 PM] #### Deployment incomplete. ####
[01:02:48 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
Edited by: user11204243 on Feb 2, 2011 1:11 PM

Cannot access EM console on SOA Suite 11g (404 error)

I have installed SOA Suite 11g on a new environment. The admin server and managed server (soa_server1) start up without any errors in logs. However after start up, I am unable to access the enterprise manager console at http://host:port/em due to 404. Interestingly, I can access the WebLogic administration console at http://host:port/console without any issue.
I have installed SOA Suite 11g before on my local machine and have never had any issue like this before.
Is there a way to manually start up the enterprise manager application? I have seen some advise in previous posts which mention the use of emctl (enterprise manager command line control) however, this does not appear applicable to the em app that runs on WebLogic application server in 11g.
Any troubleshooting advice would be greatly appreciated!

You can access the EM using http://host:7001/em url.
But for EM to be present in the domain, you should have created your domain with Enterprise Manager template selected. I think, you haven't done this step. Login to your WLS Admin Console, navigate to Deployments. Check for an application named 'em'. If it is not there, then this is the issue.
To get your domain extended with EM, do these steps.
1. Stop your servers in the domain.
2. Invoke the configuration wizard ($ORACLE_HOME/common/bin/config.sh/cmd)
3. Choose Extend Domain option. Select your domain.
4. Select Enterprise Manager template. Complete the wizard.
5. Start your servers.
Now you will be able to access EM, using the above URL.
There is no need for emctl in SOA 11gR1. Starting the Admin Server will help you to work in EM.
Hope this helps!!!

Problem with DB JCA adapter in Soa suite 11g composite appl

i am testing a simple credit card validation composite with Oracle SOA suite 11g11.1.1.4.0, Jdevloper 11.1.1.3.0 and oracle universal XE DB. I am having an exception given below. I have checked that data source is properly configured and appearing at the right place in JNDI tree. Suggestion like 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBconnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR) has also been tried result is same
**Any suggestion will greatly appreciated .**
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreditCardDBServiceSelect' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. CreditCardValidation:CreditCardDBService [ CreditCardDBService_ptt::CreditCardDBServiceSelect(CreditCardDBServiceSelect_inputParameters,CreditcardsCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DBconnection'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBconnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(Unknown Source) at com.sun.el.MethodExpressionImpl.invoke(Unknown Source) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:765) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:305) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207) at weblogic.work.ExecuteThread.run(ExecuteThread.java:176) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreditCardDBServiceSelect' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. CreditCardValidation:CreditCardDBService [ CreditCardDBService_ptt::CreditCardDBServiceSelect(CreditCardDBServiceSelect_inputParameters,CreditcardsCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DBconnection'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBconnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:992) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 79 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreditCardDBServiceSelect' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. CreditCardValidation:CreditCardDBService [ CreditCardDBService_ptt::CreditCardDBServiceSelect(CreditCardDBServiceSelect_inputParameters,CreditcardsCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DBconnection'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBconnection. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:1012) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:803) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:235) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:106) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 82 more

Hi,
The JNDI Name to use for the service connection is "eis/DB/soademoDatabase".
This Database is a requirement of the course... (Chapter 4 of Getting Started with Oracle SOA Suite 11g R1 - A Hands-On Tutorial).

SOA Suite 11g - dynamic JNDI destination JMS adapter

hi there soa suite users,
im currently using oracle soa suite 11g,
my use case having a bpel process processing something
and then route the result to several queue.
like this:
jms/adminduk/queue/mks1
jms/adminduk/queue/pdg1,
etc...
so the destination name can be build dynamically in the bpel,
and i stored in a string variable "destName".
(im using WLS 10.3 jms)
now i need to invoke a jms adapter service with produce operation,
but the queue destination needs to be using the variable "destName".
i already tried using assigning to property "jca.jms.JMSDestinationName"
in the invoke activity.
<invoke ...>
<bpelx:inputProperty name="jca.jms.JMSDestinationName"
variable="destName"/>
</invoke>
but it seems not working, and im getting this error:
Caused by: com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
parts: {{
summary=<summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation
'SendSinkBioWniFromDaerahResponse' failed du
e to: ERRJMS_ERR_CR_QUEUE_PROD.
ERRJMS_ERR_CR_QUEUE_PROD.
Unable to create Queue producer due to JMSException.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary>
,detail=<detail>[JMSExceptions:045103]While trying to find a topic or a queue we could not find the specific JMSServer
requested. The linked
exception may contain more information about the reason for failure.</detail>
,code=<code>null</code>
this is a basic use case of jms interoperability,
anyone have answers to this ??
thank you :)

Hi,
If someone is looking to dynamically set the JMSqueue name here is the solution.
in the Invoke activity set "jca.jms.JMSDestinationName"
value to "JMSHeaderVariable"
set the type to "input"
in the JMSHeaderVariable set the queue name dynamically.
and in the JMSadapter give any valid queue name, still the message will be routed to the queue which you have set in the invoke adapter.

Soa Suite 11g DbAdapter invocation error message

Similar Messages

Maybe you are looking for