SOA Tablespace PITR - 'Domain/Functional Indexes not supported'

Hi all,
Trying to recover tablespaces from a failed 12c upgrade attempt.
I have multiple backups prior to the upgrade attempt but it seems I can't perform a point in time recovery of the specific tablespaces due to the following:
MDS & SOAINFRA > Domain/Functional Indexes not supported
ORASDPM > Object not allowed in Recovery Set
Has anyone done this? How did you get around it?

I checked, this index is function_based...
thank yoiu
its DDL:
CREATE INDEX SBSECD1_MDS.MDS_PATHS_N7 ON SBSECD1_MDS.MDS_PATHS
(PATH_FULLNAME, "PATH_LOW_CN" DESC, PATH_HIGH_CN, PATH_PARTITION_ID)
LOGGING
TABLESPACE SBSECD1_MDS
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
NEXT 1M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
FLASH_CACHE DEFAULT
CELL_FLASH_CACHE DEFAULT
NOPARALLEL;

Similar Messages

PXIe-4141 Calibration Error niDCpower version 1.8 ,"calibration function is not supported by the device."

Dear sir,
Nice to meet you.
When I running the PXIe-4141 Calibration Function "niDCPower Cal Adjust Voltage Leve.vi" in niDCpower version 1.8,
it will show an error "calibration function is not supported by the device."(false cae)
But if I run the PXIe-4141 Calibration Function "niDCPower Cal Adjust Voltage Measurement.vi", (true case)
it will work.
See the attachments.
My Equiptment list:
WinXP SP3
Labview 2011
niDMM 3.0.5
niDCpower 1.8
PXI-1073 case with 2 cards.
slot2: PXIe-4141
slot6: PXI-4071
Could someone tell me the solution?
Solved!
Go to Solution.
Attachments:
4141-cal adjust voltage level.JPG ‏203 KB
4141 manual cal_20130722.vi ‏46 KB

Update:
Error Code: xBFFA4A42
niDCPower Cal Adjust Voltage Level.vi<ERR>Requested calibration function is not supported by the device.
Status Code: -200445
See "voltagle level error.JPG"
And the same error for "niDCPower Cal Adjust Current Limit.vi".
See "current limit error.JPG"
Attachments:
voltagle level error.JPG ‏15 KB
current limit error.JPG ‏16 KB

Function Download not support in ECC 6.0

Dear All ,
Now i faced the problem when upgrade my coding to ECC6.0 , my current program is using Call funtion "Download" to export the report data to Excel, but this "Download" function is not support in ECC 6.0 , they suggest me to use call function "GUI_dowload", but this function cannot give me the features like "Donwload" funtion . Any others function which can use in ECC 6.0 and same features like "Download" .
Thanks

Those functions are obsolete, ([Note 594356 - Function modules ws_upload and ws_download are obsolete|https://service.sap.com/sap/support/notes/594356])
Use news FM GUI_DOWNLOAD or class CL_GUI_FRONTEND_SERVICES method GUI_DOWNLOAD.
Regards,
Raymond

Error in Installing Netweaver--domain controllers are not supported

When i make the pre-requisite check for installing Netweawer 2004s
I am getting the follwoing error
<b>installation to domain controllers are not supported</b>
Pls help me how to resolve this
Thanks in Advance

hi balaji,
FYI,
You cannot create local users and groups on the host that is used as domain controller. Therefore, we do not support running an SAP instance (including the database instance) on the host where the DNS service is installed.
so try to log with a user, who has administrator rights. and check whtr all the services are up & running. then try to re-install.
for more on this refer the installation manual.
hope this will help you.
with regards,
Rajesh.
<i> plz, award with suitable points </i>

Problems with DHTML popup: Required DHTML functions are not supported in this browser.

When I try to open a Date calendar I receive this message:
Required DHTML functions are not supported in this browser.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Installations on domain controllers are not supported

Hi All, While checking prerequisites of operating system users and groups, following error message are getting. "installations on domain controllers are not supported". Please help. Thanks, Sam

Hi Sam,
I assume as a technical limiation from SAP. which I suppose being as a local user or even as a local group cannot be done or created on Domain controller..
"You cannot create local users and groups on the host that is used as domain controller. Therefore, we do not support running an SAP instance (including the database instance) on the host where the domain controller is installed.
I hope it helps.
Regards,
Deepanshu Sharma

"function is not supported by the current version of the backend server"

Hi,
I just updated SAP business one with latest 8.81 patch 10 and related integration component. However, when I try to add a sales order using new 1.5 version of the mobile app, it give the following error:
"Note that this function is not supported by the current version of the backend server".
Any idea what this means? Do I need to update the integration component with a different version?
Thanks

Hi Jose,
please refer to this SAP Note [1602674 - SAP Business One for iPhone and iPad - Troubleshooting Guide|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303136303236373426]
Note: you need to use your S-Account to access this note.
regards,
Fidel

ADMT Error Functional Level not supported

Hey there,
we are about to migrate to 2003-Domains to one 2012R2.
We installed ADMT Tand configured the prerequisites.
At initializing ADMT by migrating a global group, if i choose the pdc emulator of the source domain i got an error:
The domain functional level of the domain... is not supported...
Only a domain functional level higher than Windows 2000 is supported...
The Domain and Forest Level is 2003!?!
Our Domain Names are:
source1.customer.com (Netbios: Source1)
source2.customer.com (Netbios: Source2)
target.customer.com (Netbios: target)
My migration account is domain Admin in te target domain and member of built-in Administrators in the source domains...
The Auditing has been set, and also the
TcpipClientSupport Values (should not be required, but i found some posts about it...)
AllowNT4Crypto in the target domain has also been set...
If i choose another dc in the source domain i amable to proceed and get an error after Group options with Migrate SID selected:
Could not verify auditing and TcpipClientSupport on domains. Will not be able to migrate SIDs; the given domain is not available, or no connection possible....
any ideas?

Hi ,
Based on your description, there are two issues you meet.
You choose the PDC as the source domain when migrating a global group, you get the below error,
The domain functional level of the domain... is not supported...
You migrate SID when you choose another DC, you get the below error,
Could not verify auditing and TcpipClientSupport on domains. Will not be able to migrate SIDs; the given domain is
not available, or no connection possible....
If I have misunderstood your concern please let me know.
As for the first issue, I suggest you need check
the function level of the SOURCE domain. here is detail step,
Logon one of the source DCs and open the ADCU
Right click the domain name and select the properties
You can see the function level of your source domain
As for the second issue, it is about SID history
migration, here I give you the steps for you check,
Enable auditing of Account Management in the Target domain and source domain
Create a domain local group called <domain>$$$ in source domain
Create the following registry entry on the source domain
PDC
HKLM\System\CurrentControlSet\Control\LSA\TcpipCientSupport: DWORD : 0x1
If you need further assistance, please feel free to contact me.
Regards.
Bryan Yuan
Please remember to mark the replies as answers if they help

Call Library Function Node not Supported

Hai,
I have question to ask to NI members. I get an error said " Call Library Function Node 'LVASPT_WA.*ptDecimationFilterH':Node not supported". I use the call library function node in the FPGA.VI in my design. My question is, is it the function cannot used in FPGA.VI? I try to search a similar thread and find the manual but still can't find the answer. Anyone please clarify it to me. Thanks in advance.

You cannot use Call Library Function Node in FPGA. The FPGA is hardware - it has no way to call an external library. If it is not immediately obvious why it's impossible for the FPGA to call a DLL, you should spend some time understanding what a FPGA is.
You can integrate FPGA code written outside the LabVIEW environment, but that's not the same as calling a DLL.

XBP 3.0, function BAPI_XBP_JOB_ADD_ABAP_STEP not supported in VBA

Hi,
I did create a VBA application for scheduling jobs in SAP using XBP.
This application is not working anymore with XBP 3.0 because of some new parameters
has been added to function module BAPI_XBP_JOB_ADD_ABAP_STEP.
The parameter FREE_SELINFO (type : RSDSRANGE_T_SSEL) is not supported by VBA,
I did get error :
     +Error in program 'EXCEL': RfcGetStructureInfoAsTable(RSDSRANGE_T_SSEL) exception
      UNSUPPORTED_TYPE+
I do not have the ABAP skill (I'm an BC admin) to be able to copy the function and remove that
parameter.
There is an other function (SXMI_XBP_JOB_ADD_ABAP_STEP) that does not have that param. but it is missing some other stuff from BAPI_XBP_JOB_ADD_ABAP_STEP that I do need !
Does any of you have a clue on how to solve this ?
I'll try to post something on MS forum... as far as it is an MS error and not a SAP one !
Thanks for your feedback

Hi,
I have the same problem using it by Access Database; my database work right on SAP R/3 4.7 and it doesn't work in ECC 6.0.
I'm not able to add STEP on JOB
I'm receivig a Run-Time error '4701':
"Non-BAPI methods with export parameters are currently not supported"
This is the BAPI version ECC 6.0
FUNCTION bapi_xbp_job_add_abap_step.
""Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(JOBNAME) LIKE BAPIXMJOB-JOBNAME
*"     VALUE(JOBCOUNT) LIKE BAPIXMJOB-JOBCOUNT
*"     VALUE(EXTERNAL_USER_NAME) LIKE BAPIXMLOGR-EXTUSER
*"     VALUE(ABAP_PROGRAM_NAME) LIKE BAPIXMREP-REPORTID
*"     VALUE(ABAP_VARIANT_NAME) LIKE BAPIXMREP-VARIANTNAM DEFAULT
*"       SPACE
*"     VALUE(SAP_USER_NAME) LIKE BAPIXMSTEP-AUTHCKNAM DEFAULT SY-UNAME
*"     VALUE(LANGUAGE) LIKE BAPIXMSTEP-LANGUAGE DEFAULT SY-LANGU
*"     VALUE(PRINT_PARAMETERS) LIKE BAPIXMPRNT STRUCTURE BAPIXMPRNT
*"       DEFAULT SPACE
*"     VALUE(ARCHIVE_PARAMETERS) LIKE BAPIXMARCH STRUCTURE BAPIXMARCH
*"       DEFAULT SPACE
*"     VALUE(ALLPRIPAR) LIKE BAPIPRIPAR STRUCTURE BAPIPRIPAR DEFAULT
*"       SPACE
*"     VALUE(ALLARCPAR) LIKE BAPIARCPAR STRUCTURE BAPIARCPAR DEFAULT
*"       SPACE
*"     VALUE(FREE_SELINFO) TYPE RSDSRANGE_T_SSEL OPTIONAL
*" EXPORTING
*"     VALUE(STEP_NUMBER) LIKE BAPIXMJOB-STEPCOUNT
*"     VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
*" TABLES
*"      SELINFO STRUCTURE RSPARAMS OPTIONAL
and This is the old ones:
FUNCTION bapi_xbp_job_add_abap_step.
""Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(JOBNAME) LIKE BAPIXMJOB-JOBNAME
*"     VALUE(JOBCOUNT) LIKE BAPIXMJOB-JOBCOUNT
*"     VALUE(EXTERNAL_USER_NAME) LIKE BAPIXMLOGR-EXTUSER
*"     VALUE(ABAP_PROGRAM_NAME) LIKE BAPIXMREP-REPORTID
*"     VALUE(ABAP_VARIANT_NAME) LIKE BAPIXMREP-VARIANTNAM DEFAULT
*"       SPACE
*"     VALUE(SAP_USER_NAME) LIKE BAPIXMSTEP-AUTHCKNAM DEFAULT SY-UNAME
*"     VALUE(LANGUAGE) LIKE BAPIXMSTEP-LANGUAGE DEFAULT SY-LANGU
*"     VALUE(PRINT_PARAMETERS) LIKE BAPIXMPRNT STRUCTURE BAPIXMPRNT
*"       DEFAULT SPACE
*"     VALUE(ARCHIVE_PARAMETERS) LIKE BAPIXMARCH STRUCTURE BAPIXMARCH
*"       DEFAULT SPACE
*"     VALUE(ALLPRIPAR) LIKE BAPIPRIPAR STRUCTURE BAPIPRIPAR DEFAULT
*"       SPACE
*"     VALUE(ALLARCPAR) LIKE BAPIARCPAR STRUCTURE BAPIARCPAR DEFAULT
*"       SPACE
*" EXPORTING
*"     VALUE(STEP_NUMBER) LIKE BAPIXMJOB-STEPCOUNT
*"     VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
If someone is able to help me, thank you in advance

Application calling GLX 1.3 function when not supported.

Hey there. First off, thanks for any help you might give. I've been working at this for days and I've yet to find a solution.
Here's the deal: I'm trying to get compiz-fusion to work on my fresh gnome desktop. I've finally managed to get 3D acceleration working on my ATI radeon 4850 HD card, by following this guide http://bbs.archlinux.org/viewtopic.php?id=79509&p=1 And by customizing a new 2.6.32 kernel, complete with KMS.
That solved my old problem of having a white screen when trying to start compiz. Now, though, it spits out an error, stating:
WARNING: Application calling GLX 1.3 function "glxCreatePixmap" when GLX 1.3 is not supported! This is an application bug!
So, if anyone has any insight, I'd love your help. Thanks!

Yes, that's the only warning. And from what I can tell, this Warning isn't known to cause failure in Compiz-Fusion as it is in my machine. But when I try to start compiz, it spits out that warning and disables metacity, but doesn't get to enabling emerald.

Function overloading not supported by RMI-IIOP?

Hi, I am successfully connecting to a stateful session EJB running under
WebLogic 5.1, sp5 as an RMI-IIOP client. Here's the problem. If I try to
invoke an overloaded public method on my bean I get the following error:
Remote Error: CORBA UNKNOWN 0 Maybe; nested exception is:
org.omg.CORBA.UNKNOWN: minor code: 0 completed: Maybe
If I comment out all versions but one of the overloaded method and rebuild,
everything's peachy, I can call the method.
Is method overloading not supported by RMI-IIOP? Each version of the
overloaded method does get added to the weblogic.ejbc generated IDL file,
but again if there are multiple overloaded versions it doesn't work.
Thx,
Sandy Barletta

Eduardo, have you had a chance to test this yet?
Thx,
Sandy
"Eduardo Ceballos" <[email protected]> wrote in message
news:[email protected]..
This is a bug, I suspect. This should of course work. I'll look into it.
Sandy Barletta wrote:
Hi, I am successfully connecting to a stateful session EJB running under
WebLogic 5.1, sp5 as an RMI-IIOP client. Here's the problem. If I try to
invoke an overloaded public method on my bean I get the following error:
Remote Error: CORBA UNKNOWN 0 Maybe; nested exception is:
org.omg.CORBA.UNKNOWN: minor code: 0 completed: Maybe
If I comment out all versions but one of the overloaded method and
rebuild,
everything's peachy, I can call the method.
Is method overloading not supported by RMI-IIOP? Each version of the
overloaded method does get added to the weblogic.ejbc generated IDLfile,
but again if there are multiple overloaded versions it doesn't work.
Thx,
Sandy Barletta

Why Custom EL Functions are not supported in ADF Faces??

Im using jdev 10.1.3
1.- I declare a java class, with a static function for concatenation purposes.
2.- I create my tld.
3.- I call the function in my jsp.
a) If I use the $ prefix, works PERFECT.
b) If I try to call this in an outputText (i.e)
- If I use the $ prefix, not compile.
- If I use the #, I just tell me that no function is maped to my call.
Is there a REALLY GOOD reason to disable this awesome functionality??
Frank? Steve? somebody? :(

Hi Alopez,
I'll take a stab at this one:
1) In JSF, you need to expose your managed bean by use of the faces-config.xml file, instead of using a TLD (Tag Library Descriptor). Here's an example of an entry in the faces-config.xml...
<manged-bean>
<managed-bean-name>someBean</managed-bean-name>
<managed-bean-class>com.company.yourmangedbeanhere</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>Then your EL would be: #{someBean.yourresult}
2) the ${} is a JSP based expression language call, which is evaluated at page compile time, and is referred to as "Immediate Evaluation". This is good for JSP because your JSP tags are evaluated immediately. In JSF, this expression method is found mainly in the xxPageDef.xml file.
3) the #{} is a JSF based expression language call, which is evaluated at runtime, and is referred to as "Deferred Evaluation". This is necesarry for JSF because of the way the JSF request processing lifecycle works. It allows the expression to show the value and be the target.
If I take a guess, you may be mixing JSP concepts with JSF based development.
Chapter 4 in "The Complete Reference: JavaServer Faces" by Chris Schalk and Ed Burns explains this concept really well.
Hope this helps!
Kenton

How to alternate data storage into 2 arrays with an analog square wave input? (seems that the retriggerable function is not supported by my PXI card)

Hi!
I'm trying to have an analog square wave input determine where data gathered from a second analog input channel is stored. I want data to be stored to one array during the high signal period of the square wave and data to be store to another array during the low signal period of the square wave. The square wave I'm using is of constant frequency (8.3 Hz). I believe I need to use an analog input wave as opposed to a onboard clock or other timing mechanism because my square wave is also being used to modify the input going into my experimental setup. Thus the data storage needs to be correlated to the timing of the data modification in the experiment. I tried to use the retriggerable property node function, but receive error 200452, which I think means that my PXI card (6115) can't support this retriggerable function. So I'm looking for other ways to accomplish alternating data storage in response to an incoming analog square wave. Any help would be GREATLY appreciated... Thanks! (I'm also quite new with LabView so toddler-type explanations would probably be most useful )
-Shari
(LabView version 8.6)
Attachments:
Pulsed_Acq_Switch_Simplified.vi ‏47 KB

Hello Shari,
I am looking at your situation and it seems very intriguing. after downloading your file I have a couple questions to ask if you don't mind answering.
Currently in your program you are only taking one sample of data at a time, this could lead to uneven sampling. Would you like to sample at a consistent rate (say 10 Kilosamples of data a second?) if so what type of card are you using?
Also, Do you want your data to be in a 2-D array of data?
Best Wishes,
Daniel

Cross-tab report functionality does not support .csv export.

I want to export the cross tab report in .csv format , but when I export the cross tab report to .csv format only header and footer gets printed multiple times and data is not getting exported.

No , cross tab report does not getting properly exported in .csv format. Only header and footer gets printed multiple times and data is not getting exported.
does cross tab report support .csv export based on WYSIWYG?

SOA Tablespace PITR - 'Domain/Functional Indexes not supported'

Similar Messages

Maybe you are looking for