Soa_windows_x86_101310_disk1 installation problem on psapi.dll - "the proce

During 98% of the installation, it prompted the following message
"the procedure entry point GetProcessImageFileNameW could not be located in the dynamic link linrary PSAPI.dll"
I am on window XP and Explorer 7.
Does it matter to ignore the message and continue on the installation process.
I did try this route - meaning ignore the message but it seems I am not able to launch my BPEL console control properly.
I run some window tools noticed that
javaw.exe is running psapid.dll from ....Temp\OraInstall2008-04-18_09-28-41AM\psapi.dll
Is this correct ?
How does it get the copy of psapi.dll ?
I have a copy of psapi.dll under C:\WINDOWS\system32
Anyone has any idea how to resolve this problem ?

Did you compare the checksum of your downloaded file with the checksum mentioned on the download page?

Similar Messages

  • Installer problems - Could not find the main class

    Hello
    I am trying to install openmq on vista and having problems. I've had the same problem with a nightly build of 4.3 and stable 4.2 build. The install kicks off fine until I get to the part where the install happens and then I get:
    Java Virtual Machine Launcher : Could not find the main class. Program will exit
    I have several sun JREs/JDKs installed and have tried all of them, the installer itself is not impacted:
    jre 1.7.0
    jdk 1.7.0
    jre 1.6.0.7
    jre 1.6.0.7 and jre 1.6.0.7
    Am I missing something obvious or is there a way of installing without the java installer ?
    Much obliged
    Edited by: Alphawave on Oct 14, 2008 11:39 AM

    Hi,
    I've seen this error before on vista. In the past the users saw this message when they didn't have write permission on the directory they were installing to. Even with administrator privileges, they still need write permissions.
    A quick test is to:
    login as the user you are installing as.
    cd to the directory you are installing into.
    touch foo // to see if you can write to the dir.
    Thanks.

  • Installation problem on SUSE 12.1

    Hi
    I'm a Linux beginner and I am trying to install LV on SUSE 12.1
    I've also posted my problems on Lava:
    http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
    The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
     Any ideas?
    Is there a way to debug to see what's going on?
    Cheers,
    Mike
    Solved!
    Go to Solution.

    Hi Mike,
    Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest. 
    Best,
    Dan N
    Applications Engineer
    National Instruments 

  • Dispatcher Running; Server Not connected - J2ee Pos installation problems

    Hi,
    Got problem with starting J2EE Engine.
    The message in the browser:
    Dispatcher Running; Server Not connected - J2ee Pos installation problems
    Chked up in the log files:
    RFCEngine Server startup stopped.
    com.sap.mw.jco.JCo$Exception(129)-JCO_Error_Server_startup
    version of rfc driver is invalid.
    Any help
    Thnx
    Meesum

    Hi Rohin,
    Is it true that jdk must be > 1.4.
    Because I came across many places where it is explicitly stated that WAS 620 supports only jdk 1.3. pls let me know
    Thnx anyway
    meesum

  • PSAPI.dll problem in oracle installation soa_windows_x86_101310_disk1

    During 98% of the installation, it prompted the following message
    "the procedure entry point GetProcessImageFileNameW could not be located in the dynamic link linrary PSAPI.dll"
    I am on window XP and Explorer 7.
    Does it matter to ignore the message and continue on the installation process.
    I did try this route - meaning ignore the message but it seems I am not able to launch my BPEL console control properly.
    I run some window tools noticed that
    javaw.exe is running psapid.dll from ....Temp\OraInstall2008-04-18_09-28-41AM\psapi.dll
    Is this correct ?
    How does it get the copy of psapi.dll ?
    I have a copy of psapi.dll under C:\WINDOWS\system32
    Anyone has any idea how to resolve this problem ?

    Does it matter to ignore the message and continue on the installation process.I did try this route - meaning ignore the message but it seems I am not able to launch my BPEL console control properly.
    Yes, you cannot ignore the error message during installation because Oracle requires this dll file for the Oracle on Windows installation. Check to make sure that you have correct permissions granted for the Oracle installer to write to the Temp directory.

  • Error with PSAPI.DLL during installation of SOA Suite

    Hi,
    During installation, when progress bar is 99%, the installer send the message "javaw.exe: The procedure entry point GetProcessImageFileNameW could not be located in the dynamic link library PSAPI.dll". The installation continues and it seems that finish correctly.
    When i try to register the Integration server form JDev the BPEL Identity Service send the error "java.net.ConnectException:Connection refused: connect"; just like the problem in Thread: Issue Registering ESB app from JDev (Issue Registering ESB app from JDev
    I will appreciate any help, and sorry for my english.
    Jorge,

    Hi Ramana,
    Thanks for your post. The file is already located in C:\windows\system32. When the installer send me the message i checked with Process Explorer and the version that the installer use is the one located in the temp directory of the installer.
    My system Windows XP SP2 IE7.
    Thanks again,
    Jorge.

  • I am trying to install iTunes on my PC, but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." Help!

    I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Inst.error "proc.entry GetProcessImageFieNameW not found in DLL PSAPI.DLL"

    During installation of SoaSuite v10.1.3.1 (as preparation for later v10.1.3.4) I got an error popup
    showing
    "procedure entry GetProcessImageFieNameW not found in DLL PSAPI.DLL"
    After I clicked OK the installation resumes and was finished (successfully ?).
    What does that mean? Is it only a warning or do I have to start a
    repair action after installation?
    Peter

    This can be ignored it is a known issue for basic installs. Basically is it not liking the version of the dll.
    You don't need to reinstall.
    There is a workaround if you don't want to see it for future installs:
    Once you start the installer (OUI), locate the directory it is using as described "C:\Documents and Settings\YOUR_ACCOUNT\Local Settings\Temp\OraInstallYYYY-MM-DD_HH-MM-SSAM" Copy your new PSAPI.DLL (eg:5.1.2600.2180) into place and mark it as READ ONLY. This will prevent OUI from over writing it with its older version (5.0...).
    cheers
    James

  • Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

    Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

    I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

    Click here and follow the instructions.
    (98724)

  • Error message: "Adobe Application Manager "Installer failed to initialize. Please download Adobe Support Advisor to detect the problem". When following the link, Adobe Support Advisor has been discontinued 'because their products are now so stable. -I can

    I receive a message when trying to open Photoshop CS6, Illustrator CS6, etc., then when I try to follow the directions for troubleshooting, the installer fails to initialize.
    Error message: "Adobe Application Manager is needed to resolve this problem. However it is missing or damaged". Then, after download, the program fails to load and displays this message:  "Installer failed to initialize. Please download Adobe Support Advisor to detect the problem". When following the link, Adobe Support Advisor has been discontinued 'because their products are now so stable. -I can see how stable they are.. How do I get assistance with Installer issues?
    Any helpful thoughts?

    Hi David,
    Kindly try out the steps in the below mentioned link to install Creative Cloud.
    Error: "Installer failed to initialize" | Windows
    Thanks,
    Atul Saini

  • Cant install itunes - "There is a problem with this Windows Installer package.  A DLL required for this install to complete could not be run."

    Can't install itunes - "There is a problem with this Windows Installer package.  A DLL required for this install to complete could not be run."
    Using Windows 7

    Hi Acedrvr48,
    I found an article that explains steps to take if you are having trouble installing iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    I hope this helps!
    - Ari

  • Informatica installation problem - pinging the domain

    Hi,
    I am trying to install informatica and seem to be hitting a common installation problem.
    I get to the 'Domain Configuration' point and the installation halts @ the 'Pinging the domain'.
    After a few attempts, it comes back with the error 'Host:Port [MC:6001} has failed to ping back.
    As an aside the service is created, starts OK and then fails.
    All the Oracle side of things is fine and the objects have been created in my informatica schema.
    I have seen a few posts with the same issue, but no one has a definitive answer.
    Any help greatly appreciated.
    Thanks.

    Hi,
    Try to use the IP address instead of host name. I got it resolved wen i did this.
    Rgds,
    Sid

  • Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

    Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

    I have the MacIntosh volume and the Boot Camp partition only.  I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive. 
    The tech at the Apple Store had a previous life as a MSCE and was very helpful.  I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard.  I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick. 
    I do not have another installation, so that is not an option.  I will try to create an external, I have plenty of hard drives around and see if I can get it done that way.  It might take me a week or two to get back to it, but I will comment back upon completion of that effort.  Thanks for your help....Dave Iverson

  • There was a problem starting c:\users\tom\appData\local\Apps\Apple Computer\xvgtv.dll The specified module could not be found

    I get error on Windows startup. I have iCloud installed as well as other apple software.
    error:
    there was a problem starting c:\users\tom\appData\local\Apps\Apple Computer\xvgtv.dll The specified module could not be found.

    I get error on Windows startup. I have iCloud installed as well as other apple software.
    error:
    there was a problem starting c:\users\tom\appData\local\Apps\Apple Computer\xvgtv.dll The specified module could not be found.

Maybe you are looking for

  • How do I open a folder marked exec?

    I am not very good at computer skills, being self taught, and  a senior citizen. I created lists of family dates etc. in Pages. Now on cover flow several of these are grey with exec in the top right hand corner. I have tried to open these without suc

  • Exception in execution of web service (Adaptative web service model)

    Hi, I have a WSDL which is working fine in WS Navigator, but if I import it as model in WD JAVA and apply the template on component controller to read the service and execute the method wdDoInit, I am getting a run time error. the error occurs on the

  • MacBook Pro superdrive scratching dvds

    Apple, I just tried to install Diablo III and the superdrive hung up and didn't install. When I ejected the DVD I notcied the superdrive had scracthed a lined the the DVD. I took it back to the store and got another dvd. The same thing happeed. We ba

  • Button & Scroll Bar Help

    Hello, I am making a website in flash and need some help with the actionscript, Firstly I have coded the drop down menu, its a little buggy but the main problem with it is the buttons will only work if its a get URL command rather than go to and stop

  • Can I download OSX mountain Lion to more than on laptop

    can i download OS X Mountain Lion to more than one laptop without paying again