SOA WS-Security propagate fails with BPELConsole

Hello,
I've created a simple BPEL flow that calls EnterpriseOne web service via partner link. I would like to pass ws-security headers to it and hence set properties (wsseHeaders with the value propagate and another named wsseOASIS2004Compliant with value true).
When I execute the BPEL flow via BPELConsole, I'm setting the WS-Security headers but the partnerlink fails to get the ws-security header. Instead I receive error back as "Missing <wsse:Security> in SOAP Header".
If I set wsseHeaders to credential and hard code user/password for the partner link, everything works.
Any thoughts on how to resolve this?
Thanks...

appaerently with the switch to the oc4j ws providers - a regression was introduced - bug 5665917 ... which is to be fixed for 10.1.3.3 ..
pls contact oracle support to retrieve the patch ..
/clemens

Similar Messages

  • REP-56071: Security check failed with error message: Error code30009 - Gene

    REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
    Hello,
    I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
    one more thing...
    We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
    Tx,
    Diego.

    I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
    The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
    REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
    But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
    Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
    Regards.

  • Security API failed with error 60008

    HI, I have been tryng to wrap some files (or something like that) but when I select the files it comes up with an error box saying "security API failed with error 60008" can anyone help me fix this or tell me what it is?

    Launch Disk Utility and run Repair Permissions on the startup volume. Try whatever you were doing again. If there's no change, continue as follows.
    Triple-click the line below to select it:
    /private/tmp
    Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu.* An Info dialog should open.
    Does the dialog show "You can read and write" in the Sharing & Permissions section?
    In the General section, is the box labeled Locked checked?
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • REP-56071:Security check failed with error message:No privilege to do oper

    Hi
    I get the following error when I try to see the job status (..../rwservlet/showjobs?)
    REP-56071: Security check failed with error message: No privilege to do the operation
    I also get the following error on running any report on this server:
    REP-110: Unable to open file 'Test.rdf'.
    REP-1070: Error while opening or saving a document.
    REP-0110: Unable to open file 'Test.rdf'.
    Anyone seen the same issue before?

    Fugured it out - had issues with reportserver.conf file.
    _*                                                                                                                                                                                                   

  • REP-56071: Security check failed with error message

    Hi!
    We have an Oracle 9iAS R2 v9.0.2.2 installation on Linux (Red Hat Advanced Server 2.1). We have installed PatchSet 2703110, 2581587 and 2842923.
    Oracle9i Reports version is: 9.0.2.2.0
    iAS and Infrastructure are on separate hosts.
    Trying to run Reports demo test.jsp or test.rdf we get the following message:
    javax.servlet.jsp.JspException: REP-56071: Security check failed with error message: Error code30001 - Cannot access the server:rep_dkipcias
    In package:wwv_rw_usr function:security_check
    Command line is: server=rep_dkipcias report=/repdemo/examples/Tools/test.jsp rundate="29-MAY-03 09:05:01"
    Found on Metalink the following Note: 216847.1
    This recommends to comment out the security and destination tags in ORACLE_MIDDLETIER_HOME/report/conf/<repserver>.conf file
    After commenting them out reports works fine.
    BUT
    at the end of the note there is a note which states that "Commenting out the security tag removes the integration of the reports server and portal."
    We need reports integration with Portal. We need SSO as well.
    Could you give any workaround for this problem?
    PS.: I have red Note:213171.1, Note:216118.1, http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/securing9i.pdf and BUG:2645629
    None of them gave any solution for the problem
    Thanks in advance,
    Andras Weintrauth

    Hi Jeff,
    Q(1): Yes.
    (Report Name and Servers tab)
    Report Server: REP_DKIPCIAS
    Oracle Reports File Name: test.jsp
    Execute: as JSP
    (Other tabs)
    Default values. Unchanged.
    Q(2): (Acces Tab of Report Component)
    Publish to Portal = checked
    Inherit Privileges from Portal DB Provider = checked
    (Acces Tab of Report Server Component)
    Inherit Privileges from Portal DB Provider = checked
    (SSO User)
    The user I try to run the report with has the following group assignments:
    Privilege Group
    PORTAL_ADMINISTRATORS
    PORTAL_DEVELOPERS
    DBA
    PORTLET_PUBLISHERS
    Additional Info:
    To be more specific: The mentioned security check failure exists outside of Portal as well. Eg. when we try to run the default portal test examples (test.jsp, test.rdf) from the iAS home page Demonstartions tab.
    Thank You in advance,
    Andras

  • SQL30082N  Security processing failed with reason "15" (PROCESSING FAILURE)

    Hi all.
    I'm managing the following error during a system copy:
    <b>SQL30082N  Security processing failed with reason "15" ("PROCESSING FAILURE").
    SQLSTATE=08001</b>
    Inside the db2diag.log, i have the following message:
    <b>2007-10-15-16.44.56.793439+120 I718413554A270     LEVEL: Warning
    PID     : 483450               TID : 1
    FUNCTION: DB2 Common, Security, Users and Groups, secLogMessage, probe:20
    DATA #1 : String, 64 bytes
    Password validation for user sapr3 failed with rc = -2146500315</b>
    Can anyone help?
    Thanks and regards,
    Marco.

    Hi,
    check if the files
    $INSTHOME/sqllib/security/db2c?pw
    have the correct permissions. They need a SUID bit to root.
    If the SUID bit is not set, you can do a
    <db2_install_dir>/instance/db2iupdt db2<dbname>
    as user root to update your DB2 instance. This will set the permissions correctly.
    Regards
                   Frank

  • Trying to assign Security Baseline fails with error 24001

    We are trying to assign the Sample Security baseline updates to a cluster group in VMM.
    We have followed the steps here
    http://technet.microsoft.com/en-us/library/gg675110.aspx
    But the job to assign the baseline fails with the following:-
    Error 24001
    Update server operation failed with error: The specified item could not be found in the database.
    We are running VMM 2012R2 V 3.2.7510.0 on Windows Server 2012R2

    Remove wsus from VMM and add it again.
    This will fix the problem. Otherwise I Think cleaning SQL of missing update fixes the problem.

  • Starting SOA server using proxy fails with exception

    Hi,
    The problem is as mentioned in the subjet.
    In console-servers-soa server - server start - arguments , I have entered
    -Dhttp.proxyHost=XX.XX.140.2 -Dhttp.proxyPort=80
    When i try to start the server, I get this in the log:
    Listen Address server1:8001
    Public Address N/A
    Http Enabled true
    Tunneling Enabled false
    Outbound Enabled false
    Admin Traffic Enabled true>
    <Jan 19, 2011 1:10:23 PM CST> <Info> <Server> <BEA-002609> <Channel Service initialized.>
    <Jan 19, 2011 1:10:24 PM CST> <Info> <Socket> <BEA-000436> <Allocating 2 reader threads.>
    <Jan 19, 2011 1:10:24 PM CST> <Info> <Socket> <BEA-000446> <Native IO Enabled.>
    <Jan 19, 2011 1:10:24 PM CST> <Info> <IIOP> <BEA-002014> <IIOP subsystem enabled.>
    <Jan 19, 2011 1:10:53 PM CST> <Error> <Net> <BEA-000903> <Failed to communicate with proxy: XX.XX.140.2/80. Will try connection admin/7001 now.
    java.net.ProtocolException: unrecognized response from proxy: 'HTTP/1.1 403 Forbidden'
    at weblogic.socket.utils.ProxyUtils.getProxySocket(ProxyUtils.java:206)
    at weblogic.socket.utils.ProxyUtils.getClientProxy(ProxyUtils.java:221)
    at weblogic.socket.SocketMuxer.newClientSocket(SocketMuxer.java:345)
    at weblogic.socket.ChannelSocketFactory.createSocket(ChannelSocketFactory.java:79)
    When i tried the below cmd from my soa server console,
    wget www.yahoo.com
    I get proper response.
    oracle@server:/data/oracle/domains/soau_domain/servers/soa_server01_01/logs> wget www.yahoo.com
    --2011-01-19 13:50:33-- http://www.yahoo.com/
    Resolving proxy.sample.local... XX.XX.140.2
    Connecting to proxy.sample.local|XX.XX.140.2|:80... connected.
    Proxy request sent, awaiting response... 302 Found
    Location: http://au.yahoo.com/?p=us [following]
    --2011-01-19 13:50:34-- http://au.yahoo.com/?p=us
    Connecting to proxy.sample.local|XX.XX.140.2|:80... connected.
    Proxy request sent, awaiting response... 200 OK
    Length: unspecified [text/html]
    So looks like proxy server is reachable from soa server.
    Can anyone help me with where this could be getting wrong?
    Thanks
    Ganesh

    java.net.ProtocolException: unrecognized response from proxy: 'HTTP/1.1 403 ForbiddenThis looks like that the proxy is expecting an username from soa server for authentication and you have not configured soa server to send the username/password to authenticate at the proxy server. I am not sure if soa server has a way to specify username/password for proxy authentication, but a workaround we used to do in an earlier version of OSB ( ALSB 2.5, where there was no provision to specify proxy authentication crdentials) was to add the URL's you want to access via proxy, to the 'proxy-free-list' of the proxy server. A proxy wont prompt for username/password for accessing an URL which is in its 'proxy-free-list'.

  • JWSDP 1.6 xws-security Simple fails with "block not properly padded"

    Environment:
    - Windows 2000
    - Tomcat50-jwsdp
    - JAVA_HOME=C:/Progra~1/Java/jdk1.5.0_05
    - Security environment handler: SecurityEnvironmentHandler.java supplied with JWSDP 1.6 (Hello, Ron!)
    I get the following in the Tomcat Window:
    ==== Received Message End ====
    Nov 13, 2005 10:38:56 AM com.sun.org.apache.xml.internal.security.encryption.XMLCipher decryptKey
    INFO: Decryption of key type http://www.w3.org/2001/04/xmlenc#tripledes-cbc OK
    Nov 13, 2005 10:38:56 AM com.sun.xml.wss.impl.apachecrypto.DecryptionProcessor decryptElementWithCipher
    SEVERE: WSS_ENC0004: Exception [ Given final block not properly padded ] while trying to decrypt message
    Nov 13, 2005 10:38:56 AM com.sun.xml.wss.impl.filter.DumpFilter process
    INFO: ==== Sending Message Start ====
    <?xml version="1.0" encoding="UTF-8"?>
    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:enc="http://schemas.xmlsoap.org/soap/enco
    ding/" xmlns:ns0="http://xmlsoap.org/Ping" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.or
    g/2001/XMLSchema-instance">
    <env:Body>
    <env:Fault>
    <faultcode xmlns:ans1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">ans1:Fail
    edCheck</faultcode>
    <faultstring>Unable to decrypt message</faultstring>
    </env:Fault>
    </env:Body>
    </env:Envelope>
    ==== Sending Message End ====
    Please help!
    George

    Hi, I got the xws-security/samples/simple application
    working successfully with my own keystores. I have 2
    questions regarding this sample application.
    1) When running the application with the
    encrypt-server.xml and encrypt-client.xml
    configuration, why is it necessary to import the
    client's certificate into the server's truststore and
    the server's certificate into client's truststore when
    their certificates have already been signed by a
    trusted root CA (e.g. Verisign), whose certificate is
    in both truststores? Shouldn't their certificates
    containing their public keys get automatically
    exchanged during the connection request? It's a pain
    to publish a web service and expect a manual public
    certificate import for each client wanting to use the
    service.Certificates are sent only when the keyReferenceType is "Direct" which is the default. It's possible that our code is checking the certificate sent with one found in the KeyStore, but a quick scan of the code doesn't show it. If that's what's happening it's a bug. All of the other key reference strategies send only a referece to the sender's certificate in which case the reciever must have a copy of that certificate in its keystore.
    2) I use Tomcat to run the sample application and did
    set up the SSL connector to point to the keystores.
    When the client connects to the server, it uses a
    http endpoint not https. I'm aware that htpps is
    needed for SSL support but not clear on where does
    https come into play during the client's
    request/server's response process.We share the SSL keystore so that certificates don't have to be stored in more than one place. The functionality of XWS-Security and SSL is logically the same so it make sense to use the same keystore. XWS-Security operates completely separately from the transport and never knows whether HTTPS is in use or not.
    Phil Goodwin
    Technical Lead
    XWS-Security

  • SOA BPEL Composite Deployment failed with ORABPEL-05250

    hi
    i got following error while deploying composite having bpel with multiple operations..compilation was succesful with no errors....
    following are the environment...
    jdeveloper 11.1.1.3
    soa 11.1.1.5
    ==============================
    [05:57:28 PM] Error deploying archive sca_LoadMinMax_rev1.0.jar to partition "default" on server soa_server1 [soaserver.mycompany.com:8002]
    [05:57:28 PM] HTTP error code returned [500]
    [05:57:28 PM] Error message from server:
    #;There was an error deploying the composite on soa_server1: Deployment Failed: Error occurred during deployment of component: LoadMinMax to service engine: implementation.bpel, for composite: LoadMinMax: ORABPEL-05250
    #;Error deploying BPEL suitcase.
    #;error while attempting to deploy the BPEL component file "/home/oracle/middleware/user_projects/domains/servicebusdev_domain/servers/soa_server1/dc/soa_97b51b35-6545-4597-9d28-5083a4f56c97"; the exception reported is: java.lang.Exception: BPEL 1.1 compilation failed
    #;This error contained an exception thrown by the underlying deployment module.
    #;Verify the exception trace in the log (with logging level set to debug mode).
    [05:57:28 PM] Check server log for more details.
    [05:57:28 PM] Error deploying archive sca_LoadMinMax_rev1.0.jar to partition "default" on server soa_server1 [soaserver.mycompany.com:8002]
    [05:57:28 PM] #### Deployment incomplete. ####
    [05:57:28 PM] Error deploying archive file:/C:/JDeveloper/mywork/LoadMinMax/LoadMinMax/deploy/sca_LoadMinMax_rev1.0.jar
    (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
    ================================
    Please give some ligh on this issue....
    composite with simple bpel process having invoke, assign is working fine.but with multiple operation its giving deployment errors eventhough the compilation is successful...
    Regards
    jdev

    Hi,
    Every time i got this error, there was a problem with MDS module.
    Not deployed at all or not actual mds module on which sca is depend.
    Daniel.

  • Visa security verification fails with Firefox, but ok with Internet Explorer.

    When I use either Visa or Mastercard for online shopping on Firefox, when I submit the security verification (Verified by Visa) the screen freezes. I tested it by using the wrong security info and I got a response to say that it was wrong, but when I entered the correct info, it froze. I have tried different cards, as has my wife, and the same happens. Fortunately the payment doesn't go through.
    There is no problem when we use Internet Explorer or on sites where verification is not requested.

    I get that warning on both Fx26 and IE8, searching on google.com and google.com.au. My query was:
    https://www.google.com/search?q=site%3Athedepression.org.au
    For assistance with this message, try Google's support here:
    * [https://support.google.com/webmasters/answer/163633 About malware and hacked sites - Webmaster Tools Help]
    * http://productforums.google.com/forum/#!categories/webmasters/malware--hacked-sites

  • Security check failed in Report services

    Hi
    We are facing Errors in the Secured report services.We are able to login into the report server with url and its server name.but when the users access the reports then they are facing the below mentioned error.Pls help on this.
    Error :
    REP-56071:Security check failed with error message: Invalid error ID : -1.
    Pls revert if any more details

    Hi Jeff,
    Q(1): Yes.
    (Report Name and Servers tab)
    Report Server: REP_DKIPCIAS
    Oracle Reports File Name: test.jsp
    Execute: as JSP
    (Other tabs)
    Default values. Unchanged.
    Q(2): (Acces Tab of Report Component)
    Publish to Portal = checked
    Inherit Privileges from Portal DB Provider = checked
    (Acces Tab of Report Server Component)
    Inherit Privileges from Portal DB Provider = checked
    (SSO User)
    The user I try to run the report with has the following group assignments:
    Privilege Group
    PORTAL_ADMINISTRATORS
    PORTAL_DEVELOPERS
    DBA
    PORTLET_PUBLISHERS
    Additional Info:
    To be more specific: The mentioned security check failure exists outside of Portal as well. Eg. when we try to run the default portal test examples (test.jsp, test.rdf) from the iAS home page Demonstartions tab.
    Thank You in advance,
    Andras

  • Fusion Apps web service call fails with error access denied (oracle.wsm.security.WSFunctionPermission)

    Hello Guru,
    I am trying to call a supplier service from SOA/OSB.
    But while calling the service it is failing with the below error message
    access denied (oracle.wsm.security.WSFunctionPermission http://xmlns.oracle.com/apps/prc/poz/suppliers/supplierService/SupplierService#getSupplierVO invoke)
    As per OER cookbook i have attached the "oracle/wss_username_token_client_policy" to the Fusion  apps web service.
    I am trying to pass security credentials to the service by using all the methods... through composite ..through bpel through wsse header but in all cases i am getting similar error.
    Please let me know if some one has called the fusion apps web service to create a supplier of solution to my problem  as mentioned above.

    Hi Sai,
        Thanks for the quick and correct response. Yes, after doing the research, I'm also came to same conclusion. But what stops me here is that where exactly I need to check for this permission.
    I mean the theory what I built on this Authorization/Permission is that:
       For the resource - WebService (SupplierService), there is an assigned application role for which the Entitlement/Permission is provided.
    Pls. help me in the below items:
    a. What is the application role(in role hierarchy) assigned to this resource(Webservice). Which page I need to check(navigation) this and the required credentials..
    b. What is the Entitlement provided for this application role for this operation (getSupplierVO) invoke.. Which page I need to check(navigation) this and the required credentials..
    Thanks in Advance.
    Thanks & Regards
    Madhu

  • SOA composite failing with unexpected element

    Hello All
    In OIM 11g R2PS2 and SOA 11.1.1.7, we have a custom workflow which sends an approval request to all members in a specific role e.g. Role1 at operational level. I took that workflow and added a switch case which will send an approval to same role Role1 and further extended it by adding a sequential stage which will also send to all members to another role e.g. Role2. Before this switch case, there is a business rule component. After I deploy the composite and a user raise a request, the request goes to the operational level and when it is approved the request fails with the following exception in the soa log -
    ==> f-0 initial-fact()
    <Error> <oracle.soa.services.rules> <BEA-000000> <<.> Error while executing the rule session.
    The rule session 260012 failed to execute.
    Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
    Error while executing the rule session.
    The rule session 260012 failed to execute.
    Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
            at oracle.bpel.services.rules.rpi.AbstractDefaultRuleSession.execute(AbstractDefaultRuleSession.java:276)
            at oracle.bpel.services.rules.rpi.oracle2.OracleRuleSession.execute(OracleRuleSession.java:278)
    Caused By: javax.xml.bind.UnmarshalException: unexpected element (uri:"http://xmlns.oracle.com/RequestServiceApp/RequestDataService/CatalogData", local:"CatalogData"). Expected elements are <{http://xmlns.oracle.com/RequestServiceApp/RequestDataService/RoleData}RoleData>,<{http://xmlns.oracle.com/RequestServiceApp/RequestDataService/RoleData}RoleKey>
    This exception only occurs when I add the new changes - i.e. new switch case and sequential stage. I do not understand where I am going wrong. I am attaching some screen shots  -
    The workflowselection component is as follows -
    Please give me any advice, I am not understanding anything. Thank You in advance.

    I am not quite following exactly what you are trying to accomplish but I have two things to look at.
    1. When you added Role2 to the business rules, did you pass that in as a parameter?  If so, did you remember to reflect that new parameter in the business rule and the bpel process?
    2. In the copy rules from your screen shot, I see 3 slashes after catalogData.  I would expect to see 2.  However, it could be correct. I am not clear on exactly what is happening without seeing some actual source code.

  • SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

    Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine.  It alwayws works for me but after some minutes the other developer cant work in the application
    He got this error
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
    and When I see the log event after that error, it comes with another error.
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
    He has IIS5 and me too.
    I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
    and in the connection string I have.
    <add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
    I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
    Thats strange.
    The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
    If you want me to send logs please tellme

    Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
    Event Type:        Error
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              17806
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
    Event Type:        Failure Audit
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              18452
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
    I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works. 
    As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

Maybe you are looking for