SOAMANAGER - ECC 6.0

Hi
I am trying to test a web service using SOAMANAGERon ECC 6.0, using link on SDN http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20b723f8-a422-2c10-aca5-e64eeda1ff2&overridelayout=true
Configured SICF and SOAMANAGER, and i click on "Open WSDL document for selected binding" to get URL
Next step i click on "Open Web Service navigator for selected binding" and give the URL from step above
I receive the following message
Cannot download WSDL from http://lvdpe01.erp.intra:8000/sap/bc/srt/xip/sap/ecc_purchaseorder003qr/200/ecc_purchaseorder003qr/ecc_purchaseorder003qr_binding: Invalid Response Code: (404) Not Found. The request URL was:"http://lvdpe01.erp.intra:8000/sap/bc/srt/xip/sap/ecc_purchaseorder003qr/200/ecc_purchaseorder003qr/ecc_purchaseorder003qr_binding". Check, whether the URL is correct, and the Web Service that you are requesting is up and running.
Any help is much appreciated
Cheers
Edited by: Hasit Vaishnav on Sep 21, 2011 4:41 PM

Hi
I checked the port/host name via transaction SMICM > go to services> and HTTP is on 8000 and hot name is lvdpe01.erp.intra
Please can you explain a bit more on the third component "wsdl service hosted location "
Also just for info i am simualting this on ECC 6.0 and no PI involvement at the moment
cheers

Similar Messages

Issue: SOAMANAGER using Web service in ECC 6.0

Hi Experts,
I created a WebService in SAP ECC6.0 using a Remote enabled function module which has one input field and Six output fields.
In ECC 6.0 WSCONFIG,WSADMIN and LPCONFIG Tcodes are obsolete .So i have using tcode SOAMANAGER settings like Applications and Scenario Communications->Single Service Administrater-> link i have searched my newly created Webservice ->Apply settings ->Open Web Service navigator for selected binding -> getting URL and XML code on that..
Let me know any configuratons or authorizatio in my SOAMANAGER to test WS.or How to setup the WSNAVIGATOR for this scenario.
Regards,
Samruth.

Hi,
if you have created WS for RFC FM then and you just want to test it then you can use program ESD_TEST_TOOL.
execute this program and provide the WS name. it willl show request tab. you will have button XML editor. click it and provide the input value and then execute it.
The test result will be displayed in Response tab.
Thanks,
Chandra
<removed by moderator>
Edited by: Thomas Zloch on Oct 5, 2011 2:23 PM

Create Web Service Ecc 6.0 -Configure Web Aplicat. Serv (SICF, SOAMANAGER)

Hi Experts,
Im trying to consume a Web Service. My client recently upgraded to Ecc 6 version, and want's now to change all teh used RFC's to Web Service, and for all i've red until now this step doesn't seems to be so hard, creating the wsdl from the function module.
My difficulty is on th eWAS, Web Aplication Server, configuration. Im unable to create the wsdl due to the lack of configuration on the WAS. I allready been on the SICF, but i dont know what kind of services need to be activated in order to see the soamanager on the Internet Explorer and create the wsdl.
Can anyone provide me documentation to configure the WAS, or tell me how to configure it?
Any help would be apreciated.
Thanks in advance,
Best Regards
João Martins
Ps - Sorry Wrong Forum Topic - Can anyone transfer it to the Abap General pls
Edited by: joao martins on Apr 26, 2010 12:47 PM
closing this one and creating new one on the right forum
Edited by: joao martins on Apr 26, 2010 2:40 PM

Try to activate WebDynpro Services for the SOAMANAGER:
/sap/bc/webdynpro/          (Entire branch)
/sap/bc/wdvd
/sap/bc/wd_trace_tool
/sap/public/bc/ur
/sap/public/bc/icons
/sap/public/bc/icons_rtl
/sap/public/bc/webicons
/sap/public/bc/pictograms
/sap/public/bc/wdtracetool
/sap/public/bc/webdynpro/ (Entire branch)
Regards,
Angelo Abbascia.

SOAMANAGER - Alternative URLs for WSDLs and Endpoints in ECC

Hi All,
We are publishing enterprise services using SOAMANGER transaction in ECC system. In
our development environments we have no problem with the process.
However in our cert and production environments we have loadbalancers,
with SSL offload, and so both port and URLs for the endpoints and WSDLs
need to reflect the different port/url introduced via our loadbalancer
and SAP web-dispatchers.
We have looked at note 11325985, which provides good guidance - however
when we use the alternative host / port as described on page 2 of the
note the service cannot be saved and activated -
Steps for Reconstruction
Run Transaction SOAMANAGER in one of our ECC systems SED/SEQ/SEP
Activate a standard SAP enterprise service, i.e
ECC_CUSTBASICDATABYIDQR_V2
In the Transport Settings tab of the Configuration of Web Service we
enter alternative URL - our load balancers URL for cert is
erp.XXX.com and for prod erp.XXX.com. When we save the
service it produces the following error ( when we don't specify an
alternative Access URL there is no error;
ERROR: ICF: Error when creating alias node: rc: unknown nMethod:
Alias Create; return code 15
Error Message Number Screen Number Transaction Program Table
Regards,
Ramesh

1-Use the Tx: SRT_TOOLS
2-Double-click on "Display of Extended Service in Current Client Configurations"
3-Complete the "Configuration Name" with the name of the endpoint / service
4-Click on run
5-Double-click on the "Configuration Name" found in the left tree
6-You will obtain the url you are looking for without using the SOAMANAGER
7-Enjoy

Create Web Service ECC 6 - Configure Web Appl. Server (SICF,SOAMANAGER)

Hi Experts,
Im trying to consume a Web Service. My client recently upgraded to Ecc 6 version, and want's now to change all teh used RFC's to Web Service, and for all i've red until now this step doesn't seems to be so hard, creating the wsdl from the function module.
My difficulty is on th eWAS, Web Aplication Server, configuration. Im unable to create the wsdl due to the lack of configuration on the WAS. I allready been on the SICF, but i dont know what kind of services need to be activated in order to see the soamanager on the Internet Explorer and create the wsdl.
Can anyone provide me documentation to configure the WAS, or tell me how to configure it?
Any help would be apreciated.
Thanks in advance,
Best Regards
João Martins

Try to activate WebDynpro Services for the SOAMANAGER:
/sap/bc/webdynpro/          (Entire branch)
/sap/bc/wdvd
/sap/bc/wd_trace_tool
/sap/public/bc/ur
/sap/public/bc/icons
/sap/public/bc/icons_rtl
/sap/public/bc/webicons
/sap/public/bc/pictograms
/sap/public/bc/wdtracetool
/sap/public/bc/webdynpro/ (Entire branch)
Regards,
Angelo Abbascia.

Run time error while testing a service through transaction SICF/SOAMANAGER

Hi all,
We created a service for publishing the function module in web services through WSDL. When we try to test the service using SICF transaction / SOAMANAGER transaction, we get a run time error.
We are not sure whether any other settings or steps required for testing the web services..
Could you please let us know which steps/configurations we are missing?
Details of the run time error.
Service cannot be reached
What has happened?
URL http://in.ap1.sy.com:8000/wsnavigator call was terminated because the corresponding service is not available.
Note
The termination occurred in system ECC with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:J-i:INSISCSAPIDES_ECC_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Thanks
Siva

Please ask you Basis admin to perform the following.
1) Check wether the Java Stack ( Portal, BI system etc) is avaliable in your landscape.
2) Execute tcode SOAMANAGER in ECC system. This will take you to a new browser where you have to login with your SAP username and password. Under SOA MANAGEMENT you can see Technical Configuration tab>click on System Global Settings>and select Access Information J2EE server. Here provide the hostname and the port number. Save the entries.
3)Execute tcode SMICM>Goto>Services. Here you can check for the HTTP Service Name/Port number
4) Activate the required services from tcode SICF
Thanks,
Sridhar

Provider Webservice in Backend ECC system (NW 7.0, Enp1) and PI /XI 7.0,

Hello
Our backend ECC is on EnhP4 (there by NW 7.0, EnhP1), As I understand, since NW 7.0, SP 14, webservices runtime has been changed significantly to support asynchronous webservices (through WS-RM).
This ECC system is connected to our PI 7.0 system. In the back end ECC system, when I create ABAP server proxy for a synchronous interface from SPROXY, the generated proxy is also visible as a service in SOAMANAGER. However, when I do the same for asynchronous interface, the service is not visible in SOAMANAGER.
Is this an expected behavior? Does this mean, we can only expose 'out side in' approach webservices in synchronous mode if the ESR is of version 7.0? The reason I say this is when I connect the same ECC system a PI 7.1 system, I am able to expose asynchronous services that are generated out of SPROXY.
The intent here is to design the interfaces in XI 7.0, expose them as web service in ECC and consume the webservice using another EAI tool that supports WS-RM.
Any help will be appreciated.
Thanks
KK

Stefan
Thanks. Your answer makes sense with what we are observing. Do you know if this is documented somewhere in help documentation or some note.
On another note what doesn't make sense to me is why this limitation? Not sure what I am missing. Doesn't the webservice runtime in NW 7.0 support WS-RM from SP14. Why should it be dependent on the version of PI in case of point to point webservice. Unless you say we can use WS-RM in back end NW 7.0 through PI 7.1's WS adapter only.
For me this sounds like a limitation on the NW 7.0/SP14 side. What do you think?
KK
Edited by: Krishnakumar Ramamoorthy on May 31, 2009 5:50 PM

Testing a ABAP Web Service in ECC 6.0

Hi all,
I am trying create web services from ABAP using a RFC function module in ECC 6.0. Once the service got created and did configurations in SOAMANAGER also. When trying to test the service using the web service navigator it requests for WSDL URL and when provided the URL, i am getting the below error
Cannot download WSDL from http://tuasd06db.tuasw2k.tuaspower.com.sg:8000/sap/bc/srt/wsdl/bndg_DE7C08A93E4CF7F1AF60001A64258BFC/wsdl11/allinone/ws_policy/document?sap-client=220: It is not allowed to access this service. If you believe you should be able to, please contact your system administrator.
As i am new to Web services, is it due to any of the configurations missing or any authorization problem.
P.S: All the relevant services are active in SICF. I have added a new UDDI service registry also. Have entererd the J2EE server details in the System global settings under Technical configuration.
Cheers,
Madhu

Hi,
You need to configure the Web Services Navigator WHITE LIST :
[SAP help|http://help.sap.com/saphelp_nw04s/helpdata/en/b7/d7baaf1481a349ab723e3acd7334b3/frameset.htm]
5. To configure Web Service Navigator White List, in the Allowed Hosts field, enter hostnames or parts of hostnames of remote systems, to which you are allowed to connect via Web Services Navigator. To separate entries, use semicolons (, you can use an asterisk (), or a question mark (?), as wildcards. For example, if you want to enable connection to all remote systems, in the Allowed Hosts field, enter an asterisk ().
I still have one issue standing with web services. Will appreciate if you can help me with that.
[SAP help|/message/5682617#5682617 [original link is broken]]
[SAP Help|http://help.sap.com/saphelp_nw70/helpdata/en/b7/d7baaf1481a349ab723e3acd7334b3/content.htm][Sap Help|http://help.sap.com/saphelp_nw70/helpdata/en/7c/f257422d095542e10000000a1550b0/frameset.htm]
Thanks & regards,
ShreeMohan

PI 7.1, ECC 6.0 EP3, CE 7.1, and ES Bundles. SR question

Hi everyone,
We have a ECC 6.0 Enhancement Pack 3, PI 7.1 (using the ESR and SR here), and CE 7.1 sandbox enviroment.
I'm having difficulty getting the Enterprise Services available as part of Enhancement Pack 1, 2, and 3 to show up in the Service Registry.
We are following the guide "CE, ESR, AND DISCOVERY SYSTEM BUILDING AN END-TO-END ENTERPRISE SOA SCENARIO", https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/108ef7ba-8abd-2a10-f787-d5f29c5f1b88
All of the references to CE we have been replacing with PI since we want to use the SR that came with PI instead of CE.
We can get all the way up to step 6 in section 3.3 where it tells us to use LPCONFIG to create a logical port pointing to the Service Registry. We we run this tcode we get a message telling us to go to SOAMANAGER to perform the operation however I cant seem to find any documentation telling how to do this. I also dont understand why this step is needed.
Fundamentally, I do understand that ECC 6.0 is the provider for all of the Enterprise Webservices and that we need to perform configuration there to tell it how to publish those services to the SR so that they may be available to the consumer applications.
Also, if we are planning to use PI as a ESB, does this change any of how we might configure things?

I found this link on how to create a logical port in SOAMANAGER
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/cc8fd368c873dfe10000000a11466f/frameset.htm
When I follow the directions, I do not see a 'Call Parameters' tab. Any idea where this might be?

Unable to see ECC proxies in PI Service Registry

I am trying to consume ECC proxies in PI service registry but I cannot see any ECC backend proxies in PI. I have gone through several blogs, configuration guides and sdn forums to get this to work but could not. In ECC, if I use SOAMANAGER, I can see my proxy and web service in web service administration but I cannot see it in PI. I have done the following:
- System Global Settings
In Service Registry, I have defined proxy class as CO_SERVICES_REGISTRY_FLAT_SI, set to primary, logical port defined as default_port.
- On ECC WS administration, setup end points and binding.
- setup ID configuration objects for this scenario (WS to Proxy -> Proxy to WS Synchronous)
- Proxy creation in ECC also completed.
- Also checked in WSPARAM settings, same as WS Admin Service Registry.
- WSPUBLISH - getting error in ECC: RCVR_DETERMINATION.NO_RECEIVER_CASE_BE No receiver could be determined, Error retrieving Services Registry (SR) version information, Error retreiving physical system from Services Registry, Exception raised during physical system publication. Code.
and in PI getting error: INTERNAL.PROXY_NOT_ALLOWED_ON_IS Proxy calls are not permitted on sender or receiver side on the IS (client), Error retrieving Services Registry (SR) version information, No Publication possible from Integration Server(IS).
- Created type H RFC destinations in both ECC and PI.
Since WSADMIN, WSCONFIG and LPCONFIG have been combined into SOAMANAGER, are there any other settings I have to do as far as ECC communicating with PI Web Service and PI consuming ECC proxies? Did I miss anything here?
Most of the PI documenation, blogs and guides are outdated for previous versions. We are using SAP EHP 1 for SAP NetWeaver 7.1.
Thank you!

Hi Viswa,
Try to recreate the EEWB project for this...
Assign business transaction and CUSTOMER_H and with ADD_NEW_FIELDS as the type of ehancement.
Shud solve ..
Siva

Service not found in Soamanager of PI 7.1

Hi Team,
We had a scenario where we need to send data from SOAP to R3 system using Proxy in synchronous way.
since our PI is 7.1 & ECC is 6.0 EHP1, we had followed the PDF "Service Enabling with SAP PI 7.1"; which is posted in SDN.
we had implimented the PROXY in ECC system.
Now where do we need to create the Service & End point?
in ECC we do not have SOAMANAGER, so we created the service in ECC using Wizard, then we published the Service Interface for which we created the proxy in ECC system. Now we are able to see the service interface in Service Registry.
As a next step we need to configure the service in SOAMANAGER. But we are not able see the service to create the endpoint which was created in ECC system in SOAMANAGER of PI system.
Thanks in Advance,
Sriram

Hi Sri ram,
Why do you want to service enable the interface?
You can directly create a server abap proxy for your inbound interface and do the mapping between the Sender (Outbound INterface and the inbound interface in your ESR).
Do the configuration for SOAP to PROXY in your ID. Thats enough.
You do not need to create an enterprise service to send a soap message to R/3.
But if you still want to create a enterprise service in your backend system, the steps you have followed are sufficlent.
You can provide the wsdl that you see in your Service Registry to the appication that wants to consume it.
Regards,
Ravi Kanth talagana

Triggering BPM process from ECC

Dear All,
I created a WSDL in BPM and consumed it in ECC . After that created a logical port using SOAMANAGER.
While executing in the program(the code is shown below) or testing the service consumer it does not give any error. but still process not starting up.
REPORT ZTEST_BPM.
DATA : lv_port type REF TO zco_abapwsdl,
        lo_sys_exception   TYPE REF TO cx_ai_system_fault,
        input TYPE ZNEW_OPERATION_REQUEST1,
        in TYPE ztest.
TRY .
   CREATE OBJECT lv_port
     EXPORTING
         LOGICAL_PORT_NAME = 'ZPORT'.
CATCH CX_AI_SYSTEM_FAULT.
ENDTRY.
   input-in-first_name = 'ABCDEF'.
   input-in-last_name = 'G'.
TRY.
   call METHOD lv_port->NEW_OPERATION
    EXPORTING
         INPUT = INPUT.
   COMMIT WORK.
   CATCH CX_AI_SYSTEM_FAULT INTO lo_sys_exception .
   CATCH cx_ai_application_fault.
ENDTRY.
write : 'Process Started'.
Your input will be helpful.
Thanks and Regards,
Prabhu Karuppasamy

Make sure that the user you are testing this with, has all the necessary roles and authorizations on the portal to Start a BPM Process.
For all possible roles and authorizations related to SAP BPM, refer the following:
http://help.sap.com/saphelp_nw73/helpdata/en/45/d7d0e08a164c5e87e4604ba89c632a/content.htm
https://help.sap.com/saphelp_nw73/helpdata/en/9c/23eaeb4c53486f8d9c4cb376b99994/content.htm

Unable to send Asynchronus message to BPM from ABAP Object in ECC 700

Friends,I am trying to send a aysnchronus to BPM from ECC. I have done the following:
Implemented Note 1043195
Scheduled the SAP_SOAP_RUNTIME_MANAGEMENT Jobs
Created consumer proxy/logical port
Tried to send message to BOM using proxy classes.
Issue 1 :
I can see the messages in SXMB_MONI with status "Released for Processing(WS)" But the status never changes.
Issue 2 :
I can See Failed messages in SOAMANAGER with Error as below.
"A SOAP Runtime Core Exception occurred in method WSRM_CONV_FROM_STR_FORM_TO_TS of class CL_SOAP_WSRM_CRE_SEQU_RESP_NEW at position id 1 with internal error id 1009 and error text SRT: Wrong usage of SOAP Runtime classes: ("WSRM: Input value ->P0Y0M3DT0H0M0.000Sis an incorrect value") (fault location is 1 )."
Can anyone help me how to solve the two issue's.

Hi,
Did you manage to solve this issue?
Best Regards,
Hristo

Web service deploy in ECC or in XI

Hello,
I am bit confused on deployment of Web services. I found that we can deploy BAPI/RFC in ECC using wsadmin or soamanager. This means Can i access this web service from third party system with out using XI.
But, i heard this is obsolete now and we should XI for this.
This means Do i need to create scenario in XI as SOAP-RFC..where RFC on ECC and expose this interface as web service in XI using RFC adapter..
what is the best way, and how can i deploy BAPi as web service.... If I deploy it on ECC what is use of XI in this case.
Can i call this BAPI deployed WS from Java system.
Thanks,
Srinivas

Hi ,
You can always generate the wsdl from bapi by going to the link mentioned below and can invoke the WS from any other Web System. It will behave like normal web service.
Link to generate the wsdl:
http://<ECCserver>:<port>/sap/bc/soap/wsdl11?services=<FunctionName>&sap-client=<client>
You can save the wsdl and use in in your client to invoke this. There is no need of XI in this case.
Howsoever as best practice, to achieve ESOA the webservices should be located at central location(XI) and should be invoked from there.
Reward points if this answers your question and helpful.
Thanks
Amit

How to trace Logs for WebService connectivity - 3rd Party to ECC

Hi Experts,
Basically it's a simple scenario, the 3rd party will send a soap request with the information in it and wiill be sent to ECC and be written on a table.
I'm wondering on how to trace logs on the soap request sent from 3rd party to an ECC environment. I used Altova XMLSpy and soapUI and to create a soap request from wsdl created in SOAMANAGER. Both of the software returns a response. Do these both of these software really sends data (soap request) going to the binded address or it's just i simulation that wsdl created is valid.
Cheers,
R-jay

Hello,
These third party tools send web service requests to SAP system. You can trace Service invocation and download the request and response payloads using SOAMANAGER. In Logs and Trace tab, edit the Trace configuration with suitable trace level and expiration time.
Thanks,
Venu

SOAMANAGER - ECC 6.0

Similar Messages

Maybe you are looking for