Soap adapter adapter

hi,
soap adapter in my xi is not configured.i cme to know we the soap configuration guide in service.sap.com.
can any tell where to search or if any one has plz send it to me.
with regards
vijedner

Hi ,
Refer to this URL ,
Re: context level
Thanks ,
Suvarna
award pts if it helps .

Similar Messages

PI 7.11 Receiver SOAP (Axis) Adapter with MTOM (Attachments)

Hello,
Iu2019m trying to configure the Receiver SOAP (Axis) adapter for sending SOAP attachments via MTOM to a third-party webservice, but I'm not getting that PI transform the binary encode64 data in an payload element into a MTOM attachment (xop:include).
The configuration looks like this:
Transport Protocol: HTTP (Axis)
SOAP Version: 1.2
Encapsulation Format: MTOM
Keep Attchments: enabled
Payload Extraction: SOAP Body Child
First of all, could you confirm if this is supported?
Or Axis only supports MTOM for the transport protocol 'File (Axis)' like it seems refered in [Configuring the Receiver Axis SOAP Adapter|http://help.sap.com/saphelp_nwpi711/helpdata/en/45/a3c48c87cd0039e10000000a11466f/frameset.htm]
Can you please provide me some guidance here?
Thanks in advance!
Kind Regards,
Alexandre

Hello,
I am facing the exact same issue.
I can't seem to set the cookie in the http header after following the guide.
Cookie: WSL-credential=MyOwnCookie
I managed to set the SOAPAction though.
Anyone has any ideas?

Use of variable header XHeaderName1 in SOAP sender adapter

Hi all,
I have a doubt regarding the use of adapter-specific attributes in SOAP sender adapter. In specific:
the SOAP client should be able to pass a variable with the SOAP request (XHeaderName1 header variable) and this should be available in mapping (Dynamic configuration)
I've already checked the [help page|http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm] but it seems I'm doing something wrong.
I tried with those settings in SOAP adapter configuration:
Keep headers checked
XHeaderName1 = Test
I try to call the SOAP adapters in the following 2 ways, but none works (the value is not available in message mapping with Dynamic configuration)
1. Pass "Test" value xxxx in SOAP Header as a tag
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Header>
          *<Test>xxxx</Test>*
     </SOAP-ENV:Header>
     <SOAP-ENV:Body>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
2. Pass "Test" value xxxx in SOAP URL
http://host:50000/XISOAPAdapter/MessageServlet?channel=p:s:c&version=3.0&Sender.Service=...&Interface=...&Test=xxxx
Could anyone give me a hint about how to pass those values in the SOAP call and eventually the correct config. of SOAP sender ?
Thanks a lot,
Manuel

Hi Manuel,
Could you give a bit more detail on how you handled the SOAP message yourself.
I have a similar issue. I am consuming a non SAP Web Service which requires a non-standard token element to be passed back. I have created a an RFC sender to SOAP reciever scenario which works fine for the inital logon and returns the token it expects in the follow up messages.
At present I'm at a loss so your help would be much appreciated. We have got round the immediate issue by creating and sending the SOAP message directly from SAP WAS.
Could we use the XI Adapter and ABAP proxy in a similar way?
Thanks,
Tim J.

Error while posting messages to SOAP sender adapter SP 13

Hi Friends,
I have configured a SOAP sender adapter in XI 3.0 and is using the URL
http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_WEBSERVICE:CC_WEBSERVICE_SOAP to post the messages. When I open the URL in the browser I am getting the error.
Message Servlet is in Status ERROR
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_VAL_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#5 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal not instantiated
ModuleProcessorRemote not instantiated
But when I test the URL http://host:port/XISOAPAdapter/HelperServlet?action=FindChannel&channel=:BS_WEBSERVICE:CC_WEBSERVICE_SOAP to check the communication channel I am getting the right response as below.
<?xml version="1.0" ?>
<http://host:port/XISOAPAdapter/HelperServlet?action=FindChannel&channel=:BS_EBTR_WEBSERVICE:CC_EBTR_WEBSERVICE_SOAP> <s:ChannelInfo xmlns:s="http://sap.com/xi/WebService/xi30">
<channelID>e7ac884596ea3d088cbfd8b434f942f2</channelID>
<name>CC_WEBSERVICE_SOAP</name>
<type xmlns:st="http://sap.com/xi/XI/System">st:SOAP</type>
<direction>INBOUND</direction>
<party />
<service>BS_WEBSERVICE</service>
</s:ChannelInfo
I used the http capture to debug, In the 1st case though I am getting "Message Servlet in status error" I am seeing a 200 OK code in the http capture tool. When the message is posted from .net client proxy we are getting a 500 internal server error.
Am not sure what causes the error ? I saw two notes in SDN related to SOAP - J2EE SP13. We are in SP13. Is this the issue ? Wanted to know your opinion before applying the notes.
Thanks & Regards,
Mathew

ABAP & Java stack was on different SP levels.

Error while passing URL Dynamically in SOAP AXIS adapter..!!

Hi ,
Idoc> XI>SOAP-AXIS
I am doing a scenario where I need to pass the URL dynamically in SOAP-AXIS adapter by taking the RCVPRN of Idoc.
If
RCVPRN = 100 , message has to go to http://10.190.25.16:8210/file/receiver
RCVPRN = 200 , message has to go to http://10.190.25.16:8210/file/receiver2
RCVPRN = 300 , message has to go to http://10.190.25.16:8210/file/receiver3
I used the below UDF and it is working correctly and generating the URL dynamically .
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keyHeader1 = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/SOAP", "TServerLocation");
conf.put(keyHeader1, a);
return "";
The value is coming in SOAP document as expected like below.
<sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:Record namespace="http://sap.com/xi/XI/System/SOAP" name="TServerLocation">http://10.190.25.16:8210/file/receiver3</sap:Record>
</sap:DynamicConfiguration>
I used the below Configuration modules in receiver SOAP-AXIS adapter as suggested in Note 1028961.
AF_Adapters/axis/AFAdapterBean ---> afreq
AF_Adapters/axis/HandlerBean ---> xireq
AF_Adapters/axis/HandlerBean ---> dc
AF_Adapters/axis/HandlerBean ---> remover
AF_Adapters/axis/HandlerBean ---> trp
AF_Adapters/axis/HandlerBean ---> xires
AF_Adapters/axis/AFAdapterBean ---> afres
xireq -> handler.type-> java:com.sap.aii.axis.xi.XI30OutboundHandler
dc -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
dc ---> key.1 ---> write http://sap.com/xi/XI/System/SOAP TServerLocation
dc ---> location.1 ---> context
dc ---> value.1 ---> transport.url
remover ---> handler.type ---> java:com.sap.aii.axis.soap.HeaderRemovalHandler
remover ---> namespace ---> http://sap.com/xi/XI/Message/30
trp ---> handler.type ---> java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
trp ---> module.pivot ---> true
xires ---> handler.type ---> java:com.sap.aii.axis.xi.XI30OutboundHandler
and I am getting the below error in SOAP-AXIS channel at the point java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender.
2009-03-02 15:23:44 Success Axis: getting handler trp of java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
2009-03-02 15:23:45 Error Axis: error in invocation: (500)internal server error
2009-03-02 15:23:45 Error MP: Exception caught with cause (500)internal server error
2009-03-02 15:23:45 Error Exception caught by adapter framework: (500)internal server error
2009-03-02 15:23:46 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: (500)internal server error: (500)internal server error.
2009-03-02 15:23:46 Error The message status set to NDLV.
Kindly let me know if anyone has any idea what might be wrong?
Note : The given URL is correct one because I cross checked by passing them normally by giving directly in adapter and they are all working and the message is going to receiver.
Thanks
Deepthi

Hi Stefan,
>> dc -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
>> dc ---> key.1 ---> write http://sap.com/xi/XI/System/SOAP TServerLocation
>> dc ---> location.1 ---> context
>> dc ---> value.1 ---> transport.url
>> Try read instead of write
When I tried with this, I am getting the below error "Connection refused ".
Success Axis: entering HandlerBean
Success Axis: getting handler trp of java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
Error Axis: error in invocation: java.net.ConnectException: Connection refused
Error MP: Exception caught with cause java.net.ConnectException: Connection refused
Error Exception caught by adapter framework: ; nested exception is: java.net.ConnectException: Connection refused
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: ; nested exception is: java.net.ConnectException: Connection refused: java.net.ConnectException: Connection refused.
Success The message status set to WAIT.
It is going successfully when I tried sending directly. Looks like Dynamic Configuration is not working for SOAP-AXIS.
Any Suggestion?
Thanks
Deepthi.

Usage of Module processor in SOAP Receiver Adapter

Hi,
I have scenario where I am calling an external Web Service via XI. Unfortunately I need Java Mapping to generate the complete SOAP Message (there are some special header elements required by the Web Service) and flag 'no soap' in the SOAP Receiver Adapter. This works fine, but I have additional Web Service Calls that have the same Header logic and I don't want to use Java Mapping all the time.
I was wondering if it is possible to use graphical User Mapping for the Business Data that goes to the SAOP Body as a payload and use Java code to generate the SOAP Message (actually the SOAP Wrapper and the Header).
Can I do this in XI using the Module processor in the SOAP Receiver adapter or do I have to use two mappigs, one based on the Graphical mapping and another using Java Mapping? Is it feasible at all in XI?
Thanks in advance.

Hi,
You can use Module Processor.
But,
1. If it is a synch call, in when the message is going from the SOAP adapter to the Webservice, you will need to manually Add the SOAP header as you want . ( you will need to create the entire SOAP mesage as the output of the Module ).
2. When the response comes back, the same module will need to remove the SOAP header etc and pass a valid , XML message to the Graphical mapping.
If you have a requirement that some fields of the SOAP header will be needed to be accesed in the Response mapping, then you would need to either add this field to some field in the response payload.
Better option would be to use, Either a Java or a XSL mapping that does all the required stuff for you.
Regards
Bhavesh

Dynamic URL in SOAP Receiver adapter

Hi all,
I have a scenario where I am using a SOAP receiver adapter to send a cXML document to some vendors. I need to change the URL based on the vendor number (passed by sender SRM system). So I have created a user-defined function and used in message mapping to assign the right URL to the variable TServerLocation. But the communication channel still prompts for a static URL which appears to be a mandatory field. Even though the DynamicConfiguration tab in Message Monitoring shows that the TServerLocation was correctly assigned, the scenario does not work when I put some dummy in the static URL field like 'dummy' or '*'. Any ideas on how to make the communication channel go for the dynamic URL field and ignore the static URL field? I have already selected the'Use Adapter Specific Message attributes' and 'Variable Transport Binding' check boxes. Am I referring to the correct variable that references the target URL? Also other than the two checkboxes that I mentioned, I am not displayed anything else under "Adapter Specific Message Attributes" section in the comm. channel.
Thanks

James,
I ve just been digging into SAP help, and have tried it too ... Looks like it doesnt work the way it is supposed to.
Anotheer point i found was, in the FILE ADAPTER, when we say ADAPTER SPECIFI ATTRIBUTES , we can select the attirbutes.. This is not possible in a SOAP adapter...
Maybe, we can only access the ADAPTER SPECIIFC ATTIRIBUTES of a SOAP adapter, but cannot set them dynamically.
Let me know if you find something on this issue.
Regards,
Bhavesh

Adapter Module in SOAP Sender Adapter

Hi All,
To Confirm, Is it possible to use Custom Adapter Modules in SOAP Sender Adapter. If so, where exactly custom module has to be placed in communication channel with respect to the standard bean of SOAP Adapter.
Thanks in advance.
Regards,
Sudharshan N A

Hi,
The sender adapter cannot be extended Check this
http://help.sap.com/saphelp_nwpi711/helpdata/en/43/951aceb1146353e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/cd/5af7c0c994e24fb0d0088443513de2/frameset.htm
Regards
Suraj

Use of SOAP Receiver Adapter in a recursive way with dynamic Target URLs

Hi all,
I have a following scenario.
1. I have to call a webservice with a URL http://myserver.com/default.aspx?action=index
This will return a list of xml filenames as below
<?xml version="1.0" encoding="UTF-8"?>
<filelist>
<file uuid="test1" />
<file uuid="test2" />
<file uuid="test3" />
<file uuid="test4" />
</filelist>
2. Now I have to call the same webservice with a change in action so that the url looks like
URL - http://myserver.com/default.aspx?action=fetch&uuid=
for all the filenames in the list
So in essence, I have to create a dynamic URLs recursively like
http://myserver.com/default.aspx?action=fetch&uuid=test1
http://myserver.com/default.aspx?action=fetch&uuid=test2 and so on
3. And with each call to the URL in step 2, the incoming xml is to be mapped to an IDoc.
I will be creating a ABAP proxy to initiate the calls.
I would like some ideas so as to have a less complex approach to the solution.
Regards,
Neeraj

Hi,
dynamic SOAP URL - adapter specific properties (http receiver adapter)
Dynamic configuration payload - https://media.sdn.sap.com/javadocs/NW04/SPS15/pi/com/sap/aii/mapping/api/DynamicConfiguration.html
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get
(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP","THeaderSOAPACTION");
String a = http://something.abcd/applicationName/xmlMessage //set the value of actual action here
conf.put(key, a);
return "";

Problem with Dynamic Configuration in SOAP-AXIS adapter..!!!

Hi ,
Idoc> XI>SOAP-AXIS
I am doing a scenario where I need to pass the URL dynamically in SOAP-AXIS adapter by taking the SNDPRN of Idoc.
If SNDPRN = 100 , message has to go to http://10.190.25.16:8210/file/receiver
   SNDPRN = 200 , message has to go to http://20.180.26.16:8210/file/receiver
It is working correctly when I tried for single receiver. When I' tried to use DynamicConfiguration, it is coming in SOAP document but it is not working and not passing to correct channel. According to this note 1039369, I mentioned the following modules.
AF_Adapters/axis/AFAdapterBean --->                 afreq
AF_Adapters/axis/HandlerBean      --->                  xireq
AF_Adapters/axis/HandlerBean      --->                  dc
AF_Adapters/axis/HandlerBean       --->                 remover
AF_Adapters/axis/HandlerBean       --->                 trp
AF_Adapters/axis/HandlerBean        --->                xires
AF_Adapters/axis/AFAdapterBean    --->               afres
xireq -> handler.type-> java:com.sap.aii.axis.xi.XI30OutboundHandler
dc    -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
dc   --->   key.1 --->      write http://sap.com/xi/XI/System/SOAP TServerLocation
dc    --->          location.1 --->         context
dc     --->         value.1      --->        transport.url
remover    ---> handler.type    --->   java:com.sap.aii.axis.soap.HeaderRemovalHandler
remover     ---> namespace    --->      http://sap.com/xi/XI/Message/30
trp         --->     handler.type   --->    java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
trp           ---> module.pivot --->     true
xires     --->    handler.type   --->    java:com.sap.aii.axis.xi.XI30OutboundHandler
and I am getting the below error in SOAP-AXIS channel
Error Axis:    error in invocation: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error MP:     Exception caught with cause java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error           Exception caught by adapter framework: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Kindly let me know if anyone has any idea what might be wrong?
Thanks
Deepthi

I have a similar problem. I also like to add some header fields to my message und that's way I'm trying to use the AXIS adapter. (Axis adapter FAQ question 30) Unfortunately I'm getting exactly the same error message:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Deepthi, you wrote that you have missed one jar file. Can you remember which file it was?

SOAP receiver adapter digest authentization

Hallo,
I have scenario with SOAP receiver adapter configured as follow:
Adapter Type: SOAP
Transport Protocol: HTTP
Message Protocol: SOAP 1.1
Adapter Engine: Integration Serer
Target URL: http://localhost:8099/webservices/test_v1_1_2
Configure User Authentication
User: ****
Pasword:****
but WS need digest HTTP authentication and SOAP adapter send in header Authentication: Basic.
Hou can I change authentication method for SOAP protocol?
Thx

Hallo,
I solved this problem by using AXIS framework. I hope that this short instruction help to someone.
1. In SOAP receiver CC you have to set up Transport Protocol to HTTP(AXIS) and Message protocol to AXIS
2. Now you can switch Authentication to Digest (NOW adapter will still send Basic!!! Digest Authorization is Supported only by the following handler: com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender)
3. On Module tabs in section Module configuration change type HTTPSender to CommonHTTPSender:
(trp handler.type java:com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender)
4. Save and Activate
Before you start to use AXIS framefork you have to deploy necessary library.
This thread help:
Re: How to install SOAP Axis adapter and where is it available ??
Be carefull, for digest authorization you have to linked Optional library "Jakarta-Commons HttpClient" too.
Good luck.
JK

Soap Receiver Adapter Error. Pls advice urgent

Hi All,
While using Soap Receiver Adapter for synchronous communication
*My Soap Request is:*
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:SendMessage xmlns:ns1="urn:MMWebSrvService">
<strFrom>XI</strFrom>
</ns1:SendMessage>
*My Soap Response from server is:*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<tns:SendMessageResponse xmlns:tns="urn:MMWebSrvService" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<return xsi:type="xsd:int">-1</return>
<strErrorDescription xsi:type="xsd:string">String reference not set to an instance of a String. Parameter name: s</strErrorDescription>
</tns:SendMessageResponse>
How to resolve the error.
Regards

Henry,
Your xml message is not xsd compliant...see if you can generate a xml message using your wsdl with random values, compare that to your imcoming msg..and thats your issue..
Hope that helps
Regards
Ravi Raman
Reward points if helpful !

SOAP Receiver adapter error. SOAP CALL Failed

Hi ,
I am implementing scenario R/3->RFC adapter->XI->SOAP REceiver adapter->Web Service (Synchronous). I am getting the error.
SOAP: call failed
SOAP: error occured: java.net.ConnectException: Connection timed out
Message log is as below.
Any clue ?
Thanks & Regards,
Mathew
2005-10-31 18:59:58
Success
output
1130810398454
The message was successfully received by the messaging system. Profile: XI URL: http://host:Port/MessagingSystem/receive/AFW/XI
2005-10-31 18:59:58
Success
output
1130810398458
Using connection AFW. Trying to put the message into the request queue.
2005-10-31 18:59:58
Success
output
1130810398458
Message successfully put into the queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message was successfully retrieved from the request queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message status set to DLNG.
2005-10-31 18:59:58
Success
output
1130810398460
Delivering to channel: CC_CALCULATOR
2005-10-31 18:59:58
Success
output
1130810398564
SOAP: request message entering the adapter
2005-10-31 19:03:07
Success
output
1130810587497
SOAP: call failed
2005-10-31 19:03:07
Error
output
1130810587497
SOAP: error occured: java.net.ConnectException: Connection timed out
2005-10-31 19:03:07
Error
output
1130810587498
Exception caught by adapter framework: Connection timed out

Hi Mathew,
Check if the webservice is availble??? Based on the error below, it looks like the message is timing out at the Adapter Engine level waiting for the connection to make the webservice call...
Prasad

SOAP receiver adapter for Axis

Hi,
I used SOAP receiver adapter for Axis like below:
Transport Prorocol : HTTP
Message Protocol : Axis
Url: http://<IP>:<Port>/xxx/WebService/services/Head/yyy
Authentication : Basic
User: <user>
Password: <password>
SOAP Version : 1.1
SOAP Action: : <method>
Encapsulation Format : MIME
Payload Extraction : SOAP Body
When i drive PI message it generates error below.
What must i do to solve this problem?
Thanks.
Error message
com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.adapter.axis.modules.AFAdapterBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.adapter.axis.modules.AFAdapterBean@20715646 for bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: javax.ejb.CreateException: java.lang.NoClassDefFoundError: org/apache/axis/types/URI$MalformedURIException

*Url:* http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest
When i use Url with *?wsdl* it generates below (it'is very long. I give part of it)
wsdl
<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:intf="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:tns1="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" xmlns:tns2="http://schemas.hp.com/AssetManager/R51/ACMetaData" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- 
- <wsdl:types>
- <schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:AdministrationTypes="http://schemas.hp.com/AssetManager/Custom/Head/Administration/Types" xmlns:CableTypes="http://schemas.hp.com/AssetManager/Custom/Head/Cable/Types" xmlns:CatalogTypes="http://schemas.hp.com/AssetManager/Custom/Head/Catalog/Types" xmlns:ChargebackTypes="http://schemas.hp.com/AssetManager/Custom/Head/Chargeback/Types"
<import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" />
<import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" />
- <annotation>
<documentation>Auto-generated schema for AssetCenter web services for Head/SapTest Implementation</documentation>
</annotation>
<import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SAM/Types" schemaLocation="../../schema/Head/SAM/SAMTypes.xsd" />
<import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" ......
<wsdl:operation name="retrieveAllBusinessAPIListByName">
<wsdlsoap:operation soapAction="retrieveAllBusinessAPIListByName" />
<wsdl:input name="retrieveAllBusinessAPIListByNameRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="retrieveAllBusinessAPIListByNameResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SapTestService">
<wsdl:port binding="impl:SapTestSoapBinding" name="SapTest">
<wsdlsoap:address location="http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

SOAP Receiver Adapter using SSL - PI 7.0

Hi all,
i am currently faced with a .net WCF webservice integration using https via SOAP Receiver Adapter in PI 7.0.
Can anybody tell me into which Visual Administrator view i have to import my certificate in order to get https working ?
Thanks in advance,
Martin

It must be the View you have created for your partners. There is usually a Trusted view where you have your own certificate. And there are other views where partners cerificates are stored. There you have to store the certificate.
Regards,
Prateek

SOAP Receiver Adapter / Scenario calling WebServices

Hi Experts,
I am trying to call a web service. Configured a SOAP Receiver adapter. Message to Web Service goes fine but not shown with Checkered flag, but with icon with description "Log Version".
In response message for the request Error Category - MAPPING and Error ID "Cannot Read Payload".
Any ideas to clear this problem. I do have response mapping assigned to Message Interface. Message Interface is Synchronous.
Thanks in advance for any solutions.

can you verify that you are getting a response..try re-routing that to tcpgw and check if content is in line with expected response.
Regards
Ravi Raman

Soap adapter adapter

Similar Messages

Maybe you are looking for