SOAP Adapter not working. But no error messages. Just a warning!!!!

Hello Guys
I have created a simple scenario.
I am getting an Input from outside world using SOAP Adapter.
Then using a ZBAPI (RFC adapter) I am inserting a data to a ZTABLE.
To test the SOAP Adapter, I have entered the PAY LOAD (in XML format) from Runtime WorkBenches
Test Message TAB.
I have used exactly once, Best Effort etc., and have tried Sending the message.
It says Message sent but the database is not getting updated with the new value.
I have already tried it with FileAdapter as the input method and ZBAPI that I have created is working fine.
When I tried looking at the RuntimeWorkBenche's communication channel's area, it says my SOAP Adapter is inactive. I have double checked and it is ACTIVE and also activated properly
Any ideas? 
Your suggestions/input will be highly appreciated.
THanks
Ram

>>One of the postings said that this is the easiest way to see >>if the adapters are working ok
This holds true for testing receiver adapter not for sender adapter.main work of sender adapter is to pick up the message in any format and convert it to XML and post to Integration engine,since in RWB->Integration engine you are already posting XML message you have basically done the job of sender adapter by yourself hence no need of sender adapter there.
>>my question is how do i test my SOAP Adapter >>configuration to make sure it works.
you need to use Altova XML spy(its free download) or some other SOAP test client to test sender SOAP adapter
Thanx
Aamir

Similar Messages

  • Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

    Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
    This is a brand new MacBook Pro (15-inch, mid-2012) just received.  I suspect that this is a hardware problem as:
    The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
    The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
    The new MacBook Pro powers an Apple Thunderbolt display without issue.
    Both MacBook Pro's are running OSX Lion 10.7.4.
    The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
    All adapters and components (mini-displayport adapters) are Apple retail adapter.
    I have tried several external monitors, including my Dell U2412m.
    When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode.  Using the "Detect displays" button has no effect, even when used multiple times.  Rebooting does not help, nor does resetting the SMC or PRAM.
    Any other suggestions before I take it to the Genius Bar?

    I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
    I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure.  Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous).  However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
    Hope that htis helps.

  • FF5: Some sites will not load, but no error messages

    I'm using Firefox 5 on Windows Vista Home SP1.
    Since I upgraded to FF5, some sites either simply will not load. No error messages are given - the green circle icon in the tab just keep spinning.
    There's two pages that I visit daily that this happens to (though there are other pages).
    For the page http://diablo.incgamers.com, on the bottom left of the page it says "Read ssl.gstatic.com".
    The other page is http://www.jewelrydod.com but there's no message like the other page.
    Both of those sites load properly in Chrome and in IE.
    The pages also do not load in Firefox in Safe Mode.
    Help?
    Thanks!!!!
    Paul

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

    My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
    That's why i am interested on anyone's help.

    Welcome to the Apple Support Communities
    I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
    If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

  • Aperture help not working - getting JavaScript error message

    My Aperture 3 has been having a lot of strange issues lately, most, but not all of which have been cleared up by holding down command + option while starting up and going through all three of the choices there.
    One problem that remains is the inability to open the Help files. I keep getting the following message:
    “The Help Library requires JavaScript.
    If JavaScript is not enabled, you will not
    be able to view all the content.”
    Help works in all other applications, like Pages and Final Cut Pro. I don’t get JavaScript error messages in any other applications.
    I’ve already done an erase and restore from a Time Machine backup, and an archive and install. I reinstalled Aperture, although not by using the Terminal command suggested in the kbase article # HT3805.
    If I go the Terminal command route, will I lose all my projects, albums, and editing? What about Mobile Me galleries?
    I have a guest user on the computer, and when I log on to that user and open Aperture, the Help Library works fine. So, I know the problem is in my user account somewhere, but I don’t know how to address it. Any ideas?

    Welcome to the forums.
    The fact that you have access to java in another user suggests that it is a local setting or preference.
    In the applications folder/utilities there is an application Java Preferences, try resetting this and seeing if it works.
    If not, try deleting the java preferences file in your users folder
    systemHD/Users/user/Library/Preferences/com.apple.java.JavaPreferences.plist
    relaunch the app Java Preferences which creates a new preferences file for you, then try Aperture again.
    Let us know how this goes.
    Tony

  • SOAP adapter not working - say No adapter registered??

    Hello experts,
    I have configured a receiver SOAP adapter to call a web service from my UDF for a SOAP Lookup. But in my RWB's Channel Monitoring the status of all my SOAP adapters configured in the system is "????" with the short text "No adapter registered for this channel".
    When i run my UDF, there is no technical error in the code by the SOAP adapter which i call in the UDF is not gtting called with the error as "The channel cound not be found in the Integration Server Java Cache. Check if the channel exists in the Integration Builder Directory and execute a refresh of the Java Cache".
    The channel does exists in the ID and when when i see the cache status, it saws all green though in channle monitoring i am not able to see anystatus.
    Please help.
    Regards,
    Yash

    Make sure that the channel name is exactly similar. Edit the channel, just description, save and activate again. Then perform CPACache refresh using PIDIRUSER and this url.
    http://XIHost:JavaPort/CPACache/refresh?mode=full
    Regards,
    Prateek

  • Email button error works but gives Error message "10"

    I have "attach to email" buttons on my forms. I leave the email address blank for the person to fill in themselves. It works fine but on one form (and one form only) when clicking on the button an error message window comes up - with exclamation mark and the number "10", that's it. The button works (attached the file to an email) but still gives the message. My other forms don't give this message though the buttons appear identical.
    What could be causing this?
    (Livecycle 8.0)
    Thanks in advance, Marg

    Remove the "mailto:" from the Submit tab if you have the script code written in the event.
    But usually if you have "mailto:" in the submit tab and while you are preview mode, it will open two email windows. A new email with the subject as "Form Returned"..(This new email error will work only if Acrobat Pro is used by the Designer while previewing the form. If the Designer uses Acrobat Reader while previewing it does not even show any error and simply quits. You can check which one is used while previewing by going to your Windows -> Task Manager and see which EXE is running. For Acrobat Acrobat.EXE and for Reader it will be AcroRd32.EXE).
    Try removing the mailto: from the Submit tab and if you still have issues, may be you can send the file to [email protected] , I can have a look at it..
    Thanks
    Srini

  • Photoshop CS5 "Help" function not working - Adobe Air error message?

    Installed Photoshop CS5, and thought everything was working okay, but when I click on Photoshop Help, I get the error message "Adobe Air - This installation of this application is damaged. Try re-installing......" I have re-installed first Adobe Air, same problem and then uninstalled and re-installed Photoshop CS5, but the problem remains. When I first tried to use the Help function it tried to update something and for some reason this failed. I'm wondering if others have seen the same problem and know of a solution? Thanks, David.

    Hello:  there may be a configuration issue going on here.  I have escalated this issue to our Help app engineering team. In the meanwhile, please try the following:
    Uninstall the Adobe Help application: go to your Application folder > Adobe > Adobe Help (drag it to the Trash)
    Delete the following directory:
    USER NAME (home) > Library > Preferences > chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.
    Empty the Trash
    Manually update the application via this link: http://www.adobe.com/support/chc/
    Select "Photoshop" in Step 1 and then click the Install badge in Step 2.  Make sure to select "Open" (and not Save) in the installation dialog box to fully update the app.
    Note: The previous instructions did not include deleting the old application or its preference file. This will help ensure that it is thoroughly updated.

  • Lightening to 30 pin adapter not working, but was working before

    I have a 7th generation ipod nano. I have a lightening adapter that was working with an older system and now is no longer recognizing the device. I am getting the infamous not compatible message. Any ideas?

    Well I was wrong it's got nothing to do with software or a problem with the iPhone 5S, it's the adapter hardware.
    I went to the Cribbs Causeway store and was able to replicate the error message on the demo iPhones plugging in the adapter i purchased. So I was given a replacement, tried that with same result on my 5s and the demo phones. Then tried another taken off the shelf just like the previous one and voila it worked. It turns out based on the comments of the guy who served me, that they had seen a few instances of this issue.
    I had already logged a case with Apple and they are sending me another cable FOC they are going to try to establish the batches of these adapters that have this problem as they suspect a manufacturing problem
    SO, if you have this issue with a recently purchased adapater just take it back to the Apple Store and ask for a replacement.

  • ADOBE READER 8.1 WILL NOT WORK-KEEP GETTING ERROR MESSAGE 1606: COULD NOT ACCESS NETWORK LOCATION %APPDATA%

    Have tried to uninstall the Adobe Program but it will not let me.  I keep getting the 1606 error message.  I have went to the Microsoft Help site and it says that the registry may need to be modified.  They also advised you that if you do not modify it correctly you may have very serious problems.

    Please see this Microsoft KB article http://support.microsoft.com/kb/886549/
    Some registry entry may have been corrupted, and it needs to be fixed.  If you don't know how to edit the registry, do you have somebody who is confident enough to edit the Windows registry?
    Anyway, for now I just want you to check something in the registry - don't modify anything yet!
    Click Start | Run | type regedit [Enter]
    Once the Registry Editor is open, drill down to the following subkey
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
    In here you should see multiple entries, one being AppData - what is the data value on the right side?  It should be %USERPROFILE%\Application Data.
    Please close the registry editor now, and report back what you found.

  • Isync spinning forever, not syncing, but no error messages

    I have a problem:
    Isync spins continually and won't sync from my main laptop Macbook (which also is set to sync to Nokia E61 and also won't).
    There are no errors given, just continuous spinning "syncing" but not doing anything. Have to cancel sync every time.
    Happened since updating to 10.4.9 which contains native plugins for Nokia E61.
    Previously I tried a couple of plugins that worked on previous 10.4.8 and below.
    I have uninstalled these plugins (to the best of my knowledge.
    I have unpaired and reset devices on isync repeatidly.
    I have unregistered and registered computer on .mac.
    I have tried to reset .mac sync, but just does the spinning thing.
    I have done everything and am at my wit's end!
    Please, please help!
    Here is the error report:
    2007-04-20 23:06:31.384 System Preferences[8719] Failed to register NSConnection
    2007-04-20 23:08:17.399 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    2007-04-20 23:08:21.579 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    2007-04-20 23:08:21.581 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    2007-04-20 23:08:21.582 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    2007-04-20 23:08:21.584 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    2007-04-20 23:08:21.586 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    2007-04-20 23:08:21.587 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    2007-04-20 23:08:21.589 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    2007-04-20 23:08:21.590 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    2007-04-20 23:08:21.591 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    2007-04-20 23:08:21.592 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    2007-04-20 23:08:21.594 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    2007-04-20 23:08:21.595 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    2007-04-20 23:08:21.596 SyndicationAgent[8749] WARNING: BestCalendarDateFromString - can't interpret: 'Fri 20 Apr 2007 04:31:08 -800'
    NSConcreteNotification 14d97e60 {name = com.apple.syncservices.ISyncPlanChangedNotification; object = ISyncPlanEnded; userInfo = <CFDictionary 0x15179ba0 [0xa080c1c0]>{type = immutable, count = 2, capacity = 2, pairs = (
    1 : <CFString 0x360140 [0xa080c1c0]>{contents = "ISyncPlanStatus"} = <CFString 0x15155f50 [0xa080c1c0]>{contents = "Cancelled"}
    3 : <CFString 0x35e4b0 [0xa080c1c0]>{contents = "ISyncPlanIdentifier"} = <CFString 0x15143e90 [0xa080c1c0]>{contents = "F35ED4AC-E2E6-4173-9705-E7A350925B99"}
    Please help! Desperate. I am a Wedding photographer, band manager and event manager and use Ical extensively!

    Emeraldeye-
    For what it's worth, I solved the problem on my Mac with .Mac and iSync by clearing out .mac sync server by using Syncrospector, a solution I found at MacWorld: http://www.macosxhints.com/article.php?story=20070205125711148&query=sync%2Bserv ices
    Take a look and read carefully and follow instructions before proceeding.
    Phil

  • Replaced hard drive on my iMac running OSX 10.9.3 now CS4 Master Collection Not working. Receiving error message 150:30 - help.

    I have had to replace the hard drive on my iMac running OSX 10.9.3 and reloaded my CS4 Master Collection from Time Machine. I am receiving error message 150:30 saying License has stopped working what should I do?

    Unfortunately, you can't install Adobe applications by copying them from a backup, or using the Migration Assistant on a Mac. There are too many support files scattered throughout your drive which aren't moved to the correct location.
    First, you'll have to use Adobe's Cleaner Tool to remove all of the stuff you copied:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Then reinstall CS4 Master Collection from your original discs, or a backup of the downloaded files. If you don't have either, you can download Creative Suite from this link:
    Other downloads

  • Blackberry id sign in not work but no error code

    ok i wiped out my blackberry play book cuz it hadnt been working right and now i have to sign in with my id and its been trying to sing in for like 5min or so and its not giving me any error cod its just wont connet. its staying on the "loading" screen and it wont let me bypass the sign in to get in to my play book. so i cant ues it, HELP????

    I have the same problem. Obviously a problem on Blackberry's end.....

  • Pc suite will not install but get error message

    hi can someone help me please.
    i have used pc suite in the past and found it to be a little flakey, however i thought that after i got my new phone 6300 i should try again.
    i have uninstalled the suite and used the nokia cleaner.
    downloaded the latest version of pc suite from nokia site (Nokia_PC_Suite_683_rel_14_1_eng_web) and tried to install. no luck i just get an error message
    could not open key:
    UNKNOWN\MPAPI.CallcontrolMP4\CLSID.
    verify you have suffient access to that key or contact your support personnel.
    i am running xp pro
    service pack 2
    i stopped anti virus
    can anyone help me please
    cheers in advance
    jose

    Ok, try this then:
    1. Click Start > Run > give command: Regedit and then OK
    2. select key: HKEY_CLASSES_ROOT\MPAPI.CallControlMP.4
    3. click mouse's right-button and select "Permissions" from menu.
    4. check that there are full permissions in Administrators and SYSTEM -> (add permissions if those are missing)
    5. select key: HKEY_CLASSES_ROOT\MPAPI.CallControlMP.4\CLSID and repeat step 3 and 4 also to that key...
    -> Does this help??

  • Itunes not working on pc. error message at start up?

    I'm getting a error message at PC start up. and also error message when trying to start iTunes.
    I did a recent iTuens update. Is there a fix?

    This application has failed to start because MSVCR80.dll was not found. Reinstalling the Application may fix your problem.
    Many thanks. Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for