SOAP adapter not working - say No adapter registered??

Hello experts,
I have configured a receiver SOAP adapter to call a web service from my UDF for a SOAP Lookup. But in my RWB's Channel Monitoring the status of all my SOAP adapters configured in the system is "????" with the short text "No adapter registered for this channel".
When i run my UDF, there is no technical error in the code by the SOAP adapter which i call in the UDF is not gtting called with the error as "The channel cound not be found in the Integration Server Java Cache. Check if the channel exists in the Integration Builder Directory and execute a refresh of the Java Cache".
The channel does exists in the ID and when when i see the cache status, it saws all green though in channle monitoring i am not able to see anystatus.
Please help.
Regards,
Yash

Make sure that the channel name is exactly similar. Edit the channel, just description, save and activate again. Then perform CPACache refresh using PIDIRUSER and this url.
http://XIHost:JavaPort/CPACache/refresh?mode=full
Regards,
Prateek

Similar Messages

SOAP Adapter not working. But no error messages. Just a warning!!!!

Hello Guys
I have created a simple scenario.
I am getting an Input from outside world using SOAP Adapter.
Then using a ZBAPI (RFC adapter) I am inserting a data to a ZTABLE.
To test the SOAP Adapter, I have entered the PAY LOAD (in XML format) from Runtime WorkBenches
Test Message TAB.
I have used exactly once, Best Effort etc., and have tried Sending the message.
It says Message sent but the database is not getting updated with the new value.
I have already tried it with FileAdapter as the input method and ZBAPI that I have created is working fine.
When I tried looking at the RuntimeWorkBenche's communication channel's area, it says my SOAP Adapter is inactive. I have double checked and it is ACTIVE and also activated properly
Any ideas?
Your suggestions/input will be highly appreciated.
THanks
Ram

>>One of the postings said that this is the easiest way to see >>if the adapters are working ok
This holds true for testing receiver adapter not for sender adapter.main work of sender adapter is to pick up the message in any format and convert it to XML and post to Integration engine,since in RWB->Integration engine you are already posting XML message you have basically done the job of sender adapter by yourself hence no need of sender adapter there.
>>my question is how do i test my SOAP Adapter >>configuration to make sure it works.
you need to use Altova XML spy(its free download) or some other SOAP test client to test sender SOAP adapter
Thanx
Aamir

I just bought a power adapter and it is not working, says "not charging". The same for the mobile charger. Anything I need to do in the setting?

I just bought a power adapter and it is not working, says "not charging". The same for the mobile charger. Anything I need to do in the setting?

The device is locked to the carrier it was purchased through unless you specifically purchased it as unlocked directly from Apple.
Only the carrier to whom it is locked can authorize it's unlocking. To do so, the user much contact them to start the unlock process.

StarTech Adapter not working with Dell Inspiron 15, model 3521

Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521
I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model.
If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for!
Any thoughts?

Hi,
Thanks for your reply.
This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

Why does my digital AV adapter not work with my iPad

Why does my digital AV adapter not work with my iPad

i was going to try it on a flat screen hdmi input, but just as i plug the apple digital av adapter in to my ipad it says "this accessory is not supported by ipad"... my itouch says the same thing... any ideas?

IPhone 5 with ipodcable/30pins adapter not working after update IOS 7

iPhone 5 with ipodcable/30pins adapter not working after update IOS 7. The car radio is not responding when I connect the iPhone. iPhone 4s with IOS7 without the 30 pin adapter is working. So I think that the 30 pin adapter is the problem.

No no dear this is not my problem
My problem that i mean i say when i on my
Cellural data my gprs not working and not work my internet

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
This is a brand new MacBook Pro (15-inch, mid-2012) just received. I suspect that this is a hardware problem as:
The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
The new MacBook Pro powers an Apple Thunderbolt display without issue.
Both MacBook Pro's are running OSX Lion 10.7.4.
The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
All adapters and components (mini-displayport adapters) are Apple retail adapter.
I have tried several external monitors, including my Dell U2412m.
When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode. Using the "Detect displays" button has no effect, even when used multiple times. Rebooting does not help, nor does resetting the SMC or PRAM.
Any other suggestions before I take it to the Genius Bar?

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

Mini DisplayPort to HDMI Adapter Not Working

I just got a mini displayport to hdmi adapter that I ordered from dealextreme and it does not work. The adapter had very good reviews and not one review said it didnt work. When I plug in the adapter (with or without a hdmi cable attatched to it) to my macbook, the screen blinks and then goes back to normal. When everything is properly connected the tv shows no input signal (I am on the correct input channel) and the screen doesnt appear in the displayas settings in my macbook pro. I tried to reboot the macbook, shut down and turn on the screen and nothing seemed to work. The detect display option in the system preferences didnt help. I appreciate any help I can get.
-Yonatan

I just got a mini displayport to hdmi adapter that I ordered from dealextreme and it does not work. The adapter had very good reviews and not one review said it didnt work. When I plug in the adapter (with or without a hdmi cable attatched to it) to my macbook, the screen blinks and then goes back to normal. When everything is properly connected the tv shows no input signal (I am on the correct input channel) and the screen doesnt appear in the displayas settings in my macbook pro. I tried to reboot the macbook, shut down and turn on the screen and nothing seemed to work. The detect display option in the system preferences didnt help. I appreciate any help I can get.
-Yonatan

G5 dvi to vga adapter not working

DVI to VGA adapter not working with my G5 Dual 2.3 GHz Power PC. I am trying to use a VGA Monitor but can not get a signal. I also am using a Dell with a DVI Input and that works fine using a DVI Cable from my G5 to the Dell u2410.

Bad adapter?
The G5 ports are DVI-I. Any good DVI-I to VGA adapter should be fine.

My hdmi adapter not working anymore, no physical damage. Solution?

My hdmi adapter not working anymore, no physical damage. Solution?
Strange is, that i used it several times, it worked fine. Then wothout any reason (like software updete, etc) it just stopped workung, no sync.
I have not changed any parameters of my TV or Beamer.
Hardware:
Ipad 2, Apple Ipad HDMI Adapter, Samsung P2770FH, Optoma HD 65.
Thanks for any help.

I've only used mine a couple of times without any problem, but due to the thinness of the iPad, care has to be taken in inserting the adapter. Slightly wrong angle and it won't go it.
I had a laptop a few years ago where the USB connector failed. I had it replaced under the warantee, The service man told me it was not an uncommom failure on a laptop due to people "torquing" the USB socket while inserting/removing USB items. I have much the same feeling when inserting either the charger cord or my HDMI adapter.
From your description, unless the HDMI adapter failed internally, it sounds like the socket is causing the problem. A few days ago we watch our first movie from the iPad via my ATV2 and "Air Play". Worked great so I don't plan on using the HDMI adapter much at all in the future. Yes, it is a $99 solution, but it works for me. Of course, I already had the ATV2. I doubt if I would buy one just for this abiliity. If nothing else, it seems like a trip to the Apple Genius bar is in order for maybe a replacement unit.
However, with iOS 5 coming out with supposedly total mirroring, it might be worth thinking about getting an ATV2.

Microsoft teredo tunneling adapter not working

i have been facing this problem from about 3 days and I am not able to connect my phone through cable to my laptop neither i am able to use bluetooth...so I checked for the prblm and its this teredo adapter not working which is related to the devices i think....I
have followed every measure I could given by microsoft...I have tried uninstalling the teredo adapter but i couldn't...actually I clicked on the option dat was der as uninstall but it didn't....
after uninstalling only we had to restart the computer but since the uninstallation was not successfull so it didn;t helped me..
plz tell me some solution for this prblm!!!

Hi,
I am afraid that this forum is not a correct forum for this issue. Since this forum is discuss about Windows form development . I suggested you posting this thread to
answer.microsoft.com-Windows OS
Have a nice time!
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have a ipod 2nd gen it is full cannot delete,the sync button does not work,says use cd that came with ipod

ihave a ipod 2nd gen it is full cannot delete,the sync button does not work,says not used anymore,says use a cd that came with,,also cannot download itunes store,it says ios is out dated

If you can't copy your purchases by right clicking on it in the device list and choosing "transfer purchases", download the apps again for free: http://support.apple.com/kb/HT2519
Music can only be downloaded once.

HT4262 WI-Fi not working says air port not configured

Wi-fi not working says air port not configured, help]

Life is getting more complicated to do support..
You need to tell us what version airport.. extreme or express and the model number. A1xxx from the label.
You need to tell us OS.. if the profile which says 10.6.8 is wrong.. as that is confusing.
The new AC version Extreme needs 6.3 version airport utility which is only available for Lion or mountain Lion.
You might also need to turn on ipv6 local-link to get it to show in the utility.

Itunes is not working says windows is looking into the problem

itunes is not working says windows is looking into the problems

Hi mofins,
I apologize, I'm a bit unclear on the exact nature of your issue. If you are having issues with iTunes on your Windows machine, you may find the following article helpful:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
Regards,
- Brenden

I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

You need to reinstall the printer driver, and set up the printer on the new hard drive.
The Canon site should have the driver. Download it and install.
Then go to Apple menu / System Preferences / Print & Fax and click the + (plus sign) and follow the directions.

SOAP adapter not working - say No adapter registered??

Similar Messages

Maybe you are looking for