SOAP and J2ME ?

Does anyone have experience in using SOAP with J2ME to communicate with the web server?
Can you please, give me good references and share your thoughts in using both together ?
thanks
chinimilli

I haven't try it yet but ther is a SOAP implementation for J2ME : kSOAP (http://www.ksoap.org)
It uses kXML (http://www.kxml.org) which I try and it work very well ;)

Similar Messages

  • Is in PI7.1 possible asynchronous communication between SOAP and ABAPProxy?

    Hi,
    when method execute_asynchronous has disapeared since XI/PI 7.1, is
    there still way how to use ABAP proxy in asynchronous way?
    We need to build asynchronous connection SOAP->PI->ABAP_Proxy.
    In PI, both interfaces are defined as asynchronous (outbound for SOAP and
    inbound for ABAP Proxy).
    Despite of this fact, when message is sent, it is processed
    synchronous way.
    I have set breakpoint in my implementation of method for ABAP Proxy
    message processing. When message is sent and breakpoint is reached,
    whole connection stays open (between SOAP and PI and between PI and
    ABAP Proxy) and waits for processing method (the breakpointed one) to
    return. Only when processing method returns, is connection finelly
    closed.
    If i understand it correctly, this is synchronous behavior. In
    asynchronous behavior, as i understand it, should be connection
    between PI and ABAP Proxy of application server closed immediately
    after message has been delivered. This mean before my processing
    method is even called.
    The same could be said about SOAP and PI communication. Connection
    should be closed immediately after PI has received message. From
    definition of asynchronous communication of PI is obvious, that PI
    should receive message correctly and close connection to sender system
    even when receiver is unreachable. It should deliver message later
    when, receiver system is back on line. So why it keeps connection to
    sender system open while it waits for receiver?
    Why is this happening, when both interfaces are defined as
    asynchronous? Could be the reason for this, if APPLICATION
    ACKNOWLEDGEMENT is set on by default? If so, how can i change it
    to SYSTEM ACKNOWLEDGEMENT, or disable it at all?
    Or is this kind of asynchronous communication even possible since
    XI/PI 7.1 ?
    Processing of message we are sending can take some time, so we dont
    want connection pending open while waiting for finish of
    processing. Thats the reason why we have chose asynchronous model to
    use.

    Quote from How to Use the J2EE SOAP Adapter:
    "If you select Best Effort, the Web service client will receive a response
    message in the SOAP body. Otherwise, the Web service client will not receive a
    response message if no error occurs."
    "if no error occurs" - that is the problem. In either case he still
    waits if some error occure or not. I dont want it. Once PI has
    received message, I want the connection with sender to be closed. If
    there will be error in communication between PI and reciever, I want
    to see it only in PI log. That mean no notification to sender to be
    send about that error.
    Is that possible?

  • Mp3 and j2me supporting reliance mobile

    hi,
    if anyone know abt mp3 and j2me supporting Reliance phone in market.if so please give me the link where to get teh details I already checking it with reliance website and i want more information please help me.
    thanx in advance
    laxmi

    hi laxmi
    i dont know did you check this URL
    www.dadp.com
    there is one forum also avail for the j2me and realience phone you will get all the information tehre
    regards
    [email protected]

  • Https for SOAP and HTTP Receiver adapters in PI 7.1

    Hi,
    We need HTTPS Transport protocol is required to send the message to receiver systems.
    Currently we are using below procedures for https:
    1)     HTTP with SSL (= HTTPS) without client authentication
    2)      HTTP with SSL (= HTTPS) with client authentication
    But client donu2019t want this procedure.
    Here my question is How to enable the https Transport protocol in SOAP and HTTP Receiver adapters.

    >>Here my question is How to enable the https Transport protocol in SOAP and HTTP Receiver adapters.
    What I see is your client wants PI to send communication via HTTPS transport protocol. That means you have to apply for trusted certificate and import that certificate root node in Netweaver keystore.
    Then change the transport protocol from http to https in soap and http receiver communication channel and communicate to client via certificate authentication.
    Plenty of documents available in sdn about https certificate authentication. Please go through those links.
    check this thread.. might be helpful
    Client Certificate for PI authentication when Web Dispatcher terminates SSL

  • File to SOAP and SOAP to File (Synchronous)

    Hi,
    Can anybody advice me how to do the File to SOAP and SOAP to File with Synchronous call.
    Thanks,
    Naidu.

    Hi,
    Use this blog
    RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
    and create an inbound synchronous interface for soap receiver structure. provide request and response structure in it.
    Thanks!

  • RFC- XI -SOAP and response back to RFC

    Hi,
    I am doing RFC-XI-SOAP and get response back from SOAP to RFC.
    if I am not check the "Do Not Use SOAP Envelop" then it gives error in SXMB_MONI says  - NO SOAP envelop.
    "No SOAP Envelope but 1 {}RESPONSES; HTTP 200 OK"
    if I check thet  check bos ""Do Not Use SOAP Envelop" then it gives no error in SXMB_MONI , but message is not giving response back from webservice in SXMB_MONI it shows only
    <?xml version="1.0" encoding="UTF-8" ?>
      <ns1:MYRFC.Response xmlns:ns1="urn:sap-com:document:sap:rfc:functions" />
    gurus ...Pl. reply asap

    hi, all
    you are right the XML sp/tcpgateway response structure is different than what I used earlier,
    now I build the same structure,but then also some problem occures it is giving only one element from structure in response.
    it is giving
      <?xml version="1.0" encoding="UTF-8" ?>
    - <ns1:MYRFC.Response xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
      <STATUS>Success</STATUS>
      </ns1:MYRFC.Response>
    while actual inbound from WS is ...
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message   -->
    - <ns0:testrequestResponse xmlns:ns0="conversion" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" Status="Success" DbgCmd_="testrequest" DbgTag_="REQUEST">
    - <ns0:SAP_OUTPUT>
      <ns0:E1 Value="3000194" />
      <ns0:E2 Value="300"/>
      <ns0:E3  Value="3"/>
      </ns0:E4 Value="94">
      </ns0:testrequestResponse>

  • Bluetooth communication  between J2SE server and J2ME client

    Hi everyone!
    I'm new here in this forum...
    I try to make a small project to my studies,
    My project will include J2SE server and J2ME client.
    I'm stuck in the step of finding the server with the wireless toolkit emulator.
    I found this issue in old subject: here
    I try the solution in reply 6 but I don't understand exactly who to define kvem.home, and I got this error:
    " You must define the system property "kvem.home" "
    maybe someone can help me and explain how to do that?
    thanks!

    Hello,
    I want to find out how this can be done, too. I tried with
    System.setProperty("kvem.home", "C:\\WTK2.5.2");but I get an error:
    java.lang.UnsatisfiedLinkError: com.sun.kvem.jsr082.impl.bluetooth.BluetoothController.setSystemProperty(Ljava/lang/String;Ljava/lang/String;)I included these files in the build path:
    c:\WTK2.5.2\wtklib\gcf-op.jar
    c:\WTK2.5.2\wtklib\kenv.zip
    c:\WTK2.5.2\wtklib\kvem.jar
    and I import com.sun.kvem.bluetooth.*;
    I'd appreciate any help.

  • Could someone help me to clearly distinguish between SOAP and HTTP adapter?

    In which scenarios we can go for HTTP adapter and when to go for SOAP adapter?

    Hi Lekshmi !!
    A SOAP message will be bundled inside the soap envelope.HTTP is not an adapter in adapter engine whereas soap is an adapter i.e, HTTP doesn't require a communication channel where as SOAP requires.You can send soap messages using some SOAP client.
    SOAP Adapter is used to xchange SOAP messages bw remote clients and webservices....
    check this link for more differences..
    SOAP and HTTP adapter
    When you need to Send Data to XI from a Webservice , your SOAP adapter is used.
    HTTP adapter is used when you want to post a HTTP request message from a web application to XI.
    How can i make use of SOAP Sender Adapter without using any tools like XML Spy etc....
    XML SPy is used as a TEST tool when you are sending SOAP information to XI. TO actually send data , you need to configure a webservice and construct a SOAP request message and post the data .
    we use SOAP adapter when we need to connect to remote system or use Webservices in these cases we use SOAP adapter.
    HTTP Adapter is used by extenal systems to connect to Intergartin server using native HTTP Interface.
    the http adapter is a service which is directly connected to integration engine. Adapter Framework (Java) isnt involved. It is much more performant than SOAP adapter.
    The SOAP adapter is written in Java and is responsible for the SOAP envelope around the real XML message. You can build/remove that envelope as well in the mapping and use instead http adapter. But standard for webservices is using SOAP adapter.
    Check this thread....
    Difference between SOAP and Http Sender
    HTTP Adatpter Vs Soap Adapter
    HTPP Adatpter Vs Soap Adapter ????
    Difference between SOAP and Http Sender
    Difference between SOAP and Http Sender
    Plain HTTP Adapter vs SOAP Adapter with regards to SSL
    Plain HTTP Adapter vs SOAP Adapter with regards to SSL
    Hope it clears your doubt !!!!
    Questions are welcome here!!
    <b>Also mark helpful answers by rewarding points </b>
    Thanks,
    Abhishek Agrahari

  • SOAP and ConsoleOne synch problem

    I've been making some simple params modifications on a user and I found that fields have different values for the soap invocations and in a ConsoleOne view:
    I've change persistence field in Junk properties group for a user but there was no difference in ConsoleOne. I've rerun program which uses soap and I can see new values. ConsoleOne don't see new values even after turning it off and start one more. If I change value in ConsoleOne I don't see any changes in my application.
    Any idea what it or I do wrong?

    You need to use the Admin API to effect values stored
    in ConsoleOne.
    >>> On Wednesday, February 24, 2010 at 2:46 AM, testowy
    email<[email protected]> wrote:
    > I've been making some simple params modifications on a user and I found
    > that fields have different values for the soap invocations and in a
    > ConsoleOne view:
    > I've change persistence field in Junk properties group for a user but
    > there was no difference in ConsoleOne. I've rerun program which uses
    > soap and I can see new values. ConsoleOne don't see new values even
    > after turning it off and start one more. If I change value in ConsoleOne
    > I don't see any changes in my application.
    >
    > Any idea what it or I do wrong?

  • Educational Use of JMF and J2ME WTS

    Dear all,
    I have tried to find legal information about education use of JMF and J2ME WTS. I want to install these two packages in the computers of a tutorial room for student use.
    Would any kind soul please enlighten me where I can get such information?
    Thank you.
    Cheers,
    Andrew Lui
    The Open University of Hong Kong

    Maybe from Sun? If it's not mentioned in the terms and conditions of the libraries or their download sites, I wouldn't know where else to get more information.

  • SOAP and Webservice

    Hi all,
    i am new to java..!! so can someone pls help me..its urgent?
    i want to create a agent which will read the content sent through SOAP and create an XML file and send it through web service. Can anyone help me in this regard..?
    P.S :- sorry if i am repeating this question as many of them wud have already asked this..i was not able to find anythin to match my requirement.
    thanks
    bala

    i was not able
    to find anythin to match my requirement.What you're asking is so common that I find it difficult to believe your search would come up empty. A quick google search of "java web services" returns more information than you will ever need. First link that pops up:
    java.sun.com/webservices/
    Good luck.

  • SOAP and clustering

    A management question that I have to pose:
    - is there any reason to believe SOAP and webservices should not work in
    cluster-mode?
    Eventually; have anyone tried SOAP in cluster mode and got it working?
    Thanks in advance!
    - Henning

    My understanding is that if you do some sort of non-persistent "session" on
    top of SOAP, then it can break across a cluster because SOAP doesn't take
    advantage of HttpSession and thus requests could end up on any machine in
    the cluster. That's the only issue that I am aware of.
    Peace,
    Cameron Purdy
    Tangosol Inc.
    << Tangosol Server: How Weblogic applications are customized >>
    << Download now from http://www.tangosol.com/download.jsp >>
    "Henning Storhaug" <[email protected]> wrote in message
    news:[email protected]..
    A management question that I have to pose:
    - is there any reason to believe SOAP and webservices should not work in
    cluster-mode?
    Eventually; have anyone tried SOAP in cluster mode and got it working?
    Thanks in advance!
    - Henning

  • SOAP and MiniShall

    How do I check to see if we are using SOAP and how do I check to see if Mini Shall is on or off?

    Originally Posted by jmarton
    On Wed, 23 Sep 2009 17:26:01 +0000, redcoat wrote:
    > How do I check to see if we are using SOAP
    Telnet to the server on port 7191, see if it connects.
    > and how do I check to see if
    > Mini Shall is on or off?
    set tcp minshall algorithm
    Joe Marton
    Novell Knowledge Partner
    SUSE Linux Enterprise 11 is ready for action.
    the telnet didnt work

  • SOAP and JWS - Help!!

    Hi everyone!!
    I am trying to integrate SOAP and JWS. ie the application being downloaded is a SOAP messaging application. while compiling i have SAAJ api in my classpath. while executing it, i need to have it too in my classpath. before executing the application, if i dont set the classpath, the application doesnt execute. when i do, it works. its ok when i execute the application in the command prompt bcoz i can set classpath again. but issue arises when i run this example using jws. can anybody resolve this issue?
    regards,
    Manyadeveloper

    Hi I've been dealing with this problem for a little while.
    I've got an APP that is dependant on SOAP.JAR. My appp doesn't need to be signed, but SOAP.JAR does.
    Why does it need to be signed?
    I only want to download information from the server where I started my program from. When I leave SOAP.JAR unsigned it tells me I need to input the proxy address and port.
    Any ideas?
    Thanks Martin

  • SOAP AND HTTP adptors

    Hi All,
    Difference b/w SOAP AND HTTP ADAPTORS.
    WAITING FOR REPLIES.
    SANKAR

    Hello
    Please check the Rules of Engagement, https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement, before posting on the forum.
    Please search the forum before posting questions like this. It has already been answered several times in the forum. Also you will find the answer by searching help.sap.com.
    I am closing this thread.
    Regards
    Mark Smyth
    XI/PI Moderator

Maybe you are looking for