SOAP and MiniShall

How do I check to see if we are using SOAP and how do I check to see if Mini Shall is on or off?

Originally Posted by jmarton
On Wed, 23 Sep 2009 17:26:01 +0000, redcoat wrote:
> How do I check to see if we are using SOAP
Telnet to the server on port 7191, see if it connects.
> and how do I check to see if
> Mini Shall is on or off?
set tcp minshall algorithm
Joe Marton
Novell Knowledge Partner
SUSE Linux Enterprise 11 is ready for action.
the telnet didnt work

Similar Messages

Is in PI7.1 possible asynchronous communication between SOAP and ABAPProxy?

Hi,
when method execute_asynchronous has disapeared since XI/PI 7.1, is
there still way how to use ABAP proxy in asynchronous way?
We need to build asynchronous connection SOAP->PI->ABAP_Proxy.
In PI, both interfaces are defined as asynchronous (outbound for SOAP and
inbound for ABAP Proxy).
Despite of this fact, when message is sent, it is processed
synchronous way.
I have set breakpoint in my implementation of method for ABAP Proxy
message processing. When message is sent and breakpoint is reached,
whole connection stays open (between SOAP and PI and between PI and
ABAP Proxy) and waits for processing method (the breakpointed one) to
return. Only when processing method returns, is connection finelly
closed.
If i understand it correctly, this is synchronous behavior. In
asynchronous behavior, as i understand it, should be connection
between PI and ABAP Proxy of application server closed immediately
after message has been delivered. This mean before my processing
method is even called.
The same could be said about SOAP and PI communication. Connection
should be closed immediately after PI has received message. From
definition of asynchronous communication of PI is obvious, that PI
should receive message correctly and close connection to sender system
even when receiver is unreachable. It should deliver message later
when, receiver system is back on line. So why it keeps connection to
sender system open while it waits for receiver?
Why is this happening, when both interfaces are defined as
asynchronous? Could be the reason for this, if APPLICATION
ACKNOWLEDGEMENT is set on by default? If so, how can i change it
to SYSTEM ACKNOWLEDGEMENT, or disable it at all?
Or is this kind of asynchronous communication even possible since
XI/PI 7.1 ?
Processing of message we are sending can take some time, so we dont
want connection pending open while waiting for finish of
processing. Thats the reason why we have chose asynchronous model to
use.

Quote from How to Use the J2EE SOAP Adapter:
"If you select Best Effort, the Web service client will receive a response
message in the SOAP body. Otherwise, the Web service client will not receive a
response message if no error occurs."
"if no error occurs" - that is the problem. In either case he still
waits if some error occure or not. I dont want it. Once PI has
received message, I want the connection with sender to be closed. If
there will be error in communication between PI and reciever, I want
to see it only in PI log. That mean no notification to sender to be
send about that error.
Is that possible?

Https for SOAP and HTTP Receiver adapters in PI 7.1

Hi,
We need HTTPS Transport protocol is required to send the message to receiver systems.
Currently we are using below procedures for https:
1) HTTP with SSL (= HTTPS) without client authentication
2) HTTP with SSL (= HTTPS) with client authentication
But client donu2019t want this procedure.
Here my question is How to enable the https Transport protocol in SOAP and HTTP Receiver adapters.

>>Here my question is How to enable the https Transport protocol in SOAP and HTTP Receiver adapters.
What I see is your client wants PI to send communication via HTTPS transport protocol. That means you have to apply for trusted certificate and import that certificate root node in Netweaver keystore.
Then change the transport protocol from http to https in soap and http receiver communication channel and communicate to client via certificate authentication.
Plenty of documents available in sdn about https certificate authentication. Please go through those links.
check this thread.. might be helpful
Client Certificate for PI authentication when Web Dispatcher terminates SSL

File to SOAP and SOAP to File (Synchronous)

Hi,
Can anybody advice me how to do the File to SOAP and SOAP to File with Synchronous call.
Thanks,
Naidu.

Hi,
Use this blog
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
and create an inbound synchronous interface for soap receiver structure. provide request and response structure in it.
Thanks!

RFC- XI -SOAP and response back to RFC

Hi,
I am doing RFC-XI-SOAP and get response back from SOAP to RFC.
if I am not check the "Do Not Use SOAP Envelop" then it gives error in SXMB_MONI says - NO SOAP envelop.
"No SOAP Envelope but 1 {}RESPONSES; HTTP 200 OK"
if I check thet check bos ""Do Not Use SOAP Envelop" then it gives no error in SXMB_MONI , but message is not giving response back from webservice in SXMB_MONI it shows only
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:MYRFC.Response xmlns:ns1="urn:sap-com:document:sap:rfc:functions" />
gurus ...Pl. reply asap

hi, all
you are right the XML sp/tcpgateway response structure is different than what I used earlier,
now I build the same structure,but then also some problem occures it is giving only one element from structure in response.
it is giving
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MYRFC.Response xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
<STATUS>Success</STATUS>
</ns1:MYRFC.Response>
while actual inbound from WS is ...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <ns0:testrequestResponse xmlns:ns0="conversion" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" Status="Success" DbgCmd_="testrequest" DbgTag_="REQUEST">
- <ns0:SAP_OUTPUT>
<ns0:E1 Value="3000194" />
<ns0:E2 Value="300"/>
<ns0:E3 Value="3"/>
</ns0:E4 Value="94">
</ns0:testrequestResponse>

Could someone help me to clearly distinguish between SOAP and HTTP adapter?

In which scenarios we can go for HTTP adapter and when to go for SOAP adapter?

Hi Lekshmi !!
A SOAP message will be bundled inside the soap envelope.HTTP is not an adapter in adapter engine whereas soap is an adapter i.e, HTTP doesn't require a communication channel where as SOAP requires.You can send soap messages using some SOAP client.
SOAP Adapter is used to xchange SOAP messages bw remote clients and webservices....
check this link for more differences..
SOAP and HTTP adapter
When you need to Send Data to XI from a Webservice , your SOAP adapter is used.
HTTP adapter is used when you want to post a HTTP request message from a web application to XI.
How can i make use of SOAP Sender Adapter without using any tools like XML Spy etc....
XML SPy is used as a TEST tool when you are sending SOAP information to XI. TO actually send data , you need to configure a webservice and construct a SOAP request message and post the data .
we use SOAP adapter when we need to connect to remote system or use Webservices in these cases we use SOAP adapter.
HTTP Adapter is used by extenal systems to connect to Intergartin server using native HTTP Interface.
the http adapter is a service which is directly connected to integration engine. Adapter Framework (Java) isnt involved. It is much more performant than SOAP adapter.
The SOAP adapter is written in Java and is responsible for the SOAP envelope around the real XML message. You can build/remove that envelope as well in the mapping and use instead http adapter. But standard for webservices is using SOAP adapter.
Check this thread....
Difference between SOAP and Http Sender
HTTP Adatpter Vs Soap Adapter
HTPP Adatpter Vs Soap Adapter ????
Difference between SOAP and Http Sender
Difference between SOAP and Http Sender
Plain HTTP Adapter vs SOAP Adapter with regards to SSL
Plain HTTP Adapter vs SOAP Adapter with regards to SSL
Hope it clears your doubt !!!!
Questions are welcome here!!
<b>Also mark helpful answers by rewarding points </b>
Thanks,
Abhishek Agrahari

SOAP and ConsoleOne synch problem

I've been making some simple params modifications on a user and I found that fields have different values for the soap invocations and in a ConsoleOne view:
I've change persistence field in Junk properties group for a user but there was no difference in ConsoleOne. I've rerun program which uses soap and I can see new values. ConsoleOne don't see new values even after turning it off and start one more. If I change value in ConsoleOne I don't see any changes in my application.
Any idea what it or I do wrong?

You need to use the Admin API to effect values stored
in ConsoleOne.
>>> On Wednesday, February 24, 2010 at 2:46 AM, testowy
email<[email protected]> wrote:
> I've been making some simple params modifications on a user and I found
> that fields have different values for the soap invocations and in a
> ConsoleOne view:
> I've change persistence field in Junk properties group for a user but
> there was no difference in ConsoleOne. I've rerun program which uses
> soap and I can see new values. ConsoleOne don't see new values even
> after turning it off and start one more. If I change value in ConsoleOne
> I don't see any changes in my application.
>
> Any idea what it or I do wrong?

SOAP and Webservice

Hi all,
i am new to java..!! so can someone pls help me..its urgent?
i want to create a agent which will read the content sent through SOAP and create an XML file and send it through web service. Can anyone help me in this regard..?
P.S :- sorry if i am repeating this question as many of them wud have already asked this..i was not able to find anythin to match my requirement.
thanks
bala

i was not able
to find anythin to match my requirement.What you're asking is so common that I find it difficult to believe your search would come up empty. A quick google search of "java web services" returns more information than you will ever need. First link that pops up:
java.sun.com/webservices/
Good luck.

SOAP and clustering

A management question that I have to pose:
- is there any reason to believe SOAP and webservices should not work in
cluster-mode?
Eventually; have anyone tried SOAP in cluster mode and got it working?
Thanks in advance!
- Henning

My understanding is that if you do some sort of non-persistent "session" on
top of SOAP, then it can break across a cluster because SOAP doesn't take
advantage of HttpSession and thus requests could end up on any machine in
the cluster. That's the only issue that I am aware of.
Peace,
Cameron Purdy
Tangosol Inc.
<< Tangosol Server: How Weblogic applications are customized >>
<< Download now from http://www.tangosol.com/download.jsp >>
"Henning Storhaug" <[email protected]> wrote in message
news:[email protected]..
A management question that I have to pose:
- is there any reason to believe SOAP and webservices should not work in
cluster-mode?
Eventually; have anyone tried SOAP in cluster mode and got it working?
Thanks in advance!
- Henning

SOAP and JWS - Help!!

Hi everyone!!
I am trying to integrate SOAP and JWS. ie the application being downloaded is a SOAP messaging application. while compiling i have SAAJ api in my classpath. while executing it, i need to have it too in my classpath. before executing the application, if i dont set the classpath, the application doesnt execute. when i do, it works. its ok when i execute the application in the command prompt bcoz i can set classpath again. but issue arises when i run this example using jws. can anybody resolve this issue?
regards,
Manyadeveloper

Hi I've been dealing with this problem for a little while.
I've got an APP that is dependant on SOAP.JAR. My appp doesn't need to be signed, but SOAP.JAR does.
Why does it need to be signed?
I only want to download information from the server where I started my program from. When I leave SOAP.JAR unsigned it tells me I need to input the proxy address and port.
Any ideas?
Thanks Martin

SOAP AND HTTP adptors

Hi All,
Difference b/w SOAP AND HTTP ADAPTORS.
WAITING FOR REPLIES.
SANKAR

Hello
Please check the Rules of Engagement, https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement, before posting on the forum.
Please search the forum before posting questions like this. It has already been answered several times in the forum. Also you will find the answer by searching help.sap.com.
I am closing this thread.
Regards
Mark Smyth
XI/PI Moderator

SOAP and XML

How can I setup SOAP and web services to POST and GET XML file from the third party application?
What document can I read? Thanks!

If you are an Oracle9i JDeveloper user, you might want to try the Oracle9i JDeveloper guide which gives you a simple helloworld sample to get you going. This uses the SOAP environment that is automatically configured by default on OC4J. See:
http://otn.oracle.com/sample_code/products/jdev/files/JDevRGuide.zip
The Web service demo shows how an EJB can be published on OC4J as a Web service - basically by configuring a SOAP-aware servlet that front-ends your Java/PL/SQL component.
For a more complete example check out the sample one that just came out the other day covering stateless and stateful Java classes, an EJB and a PL/SQL stored procedure:
http://otn.oracle.com/sample_code/tech/java/web_services/
For a set of examples of Web services that ship with OC4J, download OC4J and look in the directory:
<OC4J_Home>\j2ee\home\demo\web_services\
and take a read of the readme.txt. The area of OTN describing the OC4J Web services content is at:
http://otn.oracle.com/tech/webservices/
If you are looking for the Apache SOAP environment that ships with Oracle9iAS, simply look for the soap.ear file that is on the distribution. Normally this is located in <OC4J_Home>/soap/webapps/ but it might be easier to search the OC4J directory structure because its location changed between the 1.0.2.2 release and Release 2 now available here as noted above.
Hope this gives a start.
Mike.

SOAP and XML-RPC

Which are Oracle's plans for supporting SOAP and XML-RPC?

Oracle iAS 9i release 1.0.2.2 contains SOAP server support for Java programmers.
Oracle iAS 9i release 2.0 will feature more support, as will an upcoming version of JDeveloper to simplify the development and use of Web Services.

SMP3.0 Kapsel support for SOAP and REST services(not ODATA) and Symbian platfrom

Dear Experts,
Can we develop apps using Kapsel on SOAP and REST services?
As phonegap supports Symbian platform, will Kapsel apps work on Symbian???
Regards
Srini
7730801444

I think you should reconsidering the Phonegap supports Symbian part.
As Phonegap is based upon Cordova, PG basically supports what Cordova supports. Cordova dropped Symbian a while ago. The latest release does not support Symbian: Apache Cordova
The Platform section does not mention Symbian, but does some "exotic" ones like WebOS, Tizen, FirefoxOS.
Same for PG: PhoneGap API Documentation -> no Symbian
Sure, PG 2.x listed Symbian, but 2.x is based on another architecture than PG 3 and Cordova 3. As Kapsel is a set of SAP plugins for Cordova 3, Kapsel needs Cordova 3.
As long as Symbian is not in the list of platform Cordova runs on, there won't be Kapsel for Symbian.

Regarding SOAP and HTTP

Hi,
Please Explain Differences between SOAP and HTTP Adapters?
Regards,
Giridhar.C

Hi Giri,
Use SEARCH FUNCTION IN SDN ,YOU WILL FIND TONS OF LINKS ON SAME CONCEPT.
Regards,
Raj

SOAP and MiniShall

Similar Messages

Maybe you are looking for