SOAP Axis adapter - problem with XML formatting

Hello All,
We are using SOAP Axis adapter on our scenario (because of NTLM authenticatiom) and faced a problem that some module in a module chain is pretty-formatting XML message (inserting newlines and spaces).
Receiving WebService is REALLY strict on format and doesn't allow spaces and newlines between XML elements.
Formatting is for sure done already in adapter as in sxmb_moni message is still one-liner.
After different tests this formatting is most likely done by XI30OutboundHandler.
Are there any parameters to prevent this formatting?
If there are no parameters, than maybe there is a standard module to remove this XML indentation?
Where I can found source code for XI30OutboundHandler to check how it is extracting payload from XI message?
Thanks in advance for your answers!
Best Regards,
Artsiom Anichenka

Hi, have you find a solution for this problem?
I've tried set the parameter “disablePrettyXML”, as mentioned in SAP note 1039369 (search for “disabling pretty XML”), but apparently it didn’t work too. Have you tried that?
I still get linefeeds and carriage return in the post requisition to the WebService.
Regards,
Ronaldo Schork.

Similar Messages

  • Problem with XML formatting

    All,
    Lets suppose we have a table like
    create table Test_data
    user_mane varchar2(30),
    user_id number,
    xml_data varchar2(3000)
    and we have inserted the data as
    Insert into Test_data(user_mane,user_id,xml_data) values
    ('ABC',19,'<Employee><firstName>Kavita</firstName><lastName>Khandhadia</lastName></Employee>');
    Insert into Test_data(user_mane,user_id,xml_data) values
    ('XYZ',19,'<Folder><folderName>Rx</folderName><folderDescription>Rxdescr</folderDescription></Folder>');
    Now,In select statement I want to fetch the data without the xml tab. i.e, the data should look like as :
    user_mane user_id xml_data
    ABC 19 Kavita Khandhadia
    XYZ 19 Rx Rxdescr
    Need your inputs here.
    Regards
    Oracle User
    Edited by: oracle user on Apr 16, 2012 7:40 AM

    try
    select user_mane, user_id,
           extractvalue(xmltype(xml_data), '/Folder/folderName') || ' ' || extractvalue(xmltype(xml_data), '/Folder/folderDescription') xml_data
    from test_data
    where existsnode(xmltype(xml_data), '/Folder') = 1
    union all
    select user_mane, user_id,
           extractvalue(xmltype(xml_data), '/Employee/firstName') || ' ' || extractvalue(xmltype(xml_data), '/Employee/lastName') xml_data
    from test_data
    where existsnode(xmltype(xml_data), '/Employee') = 1
    USER_MANE                      USER_ID                XML_DATA
    XYZ                            19                     Rx Rxdescr
    ABC                            19                     Kavita Khandhadiabut i think no good store xml(s) with different structures and as varchar in one table

  • Problem with Dynamic Configuration in SOAP-AXIS adapter..!!!

    Hi ,
    Idoc> XI>SOAP-AXIS
    I am doing a scenario where I need to pass the URL dynamically in SOAP-AXIS adapter by taking the SNDPRN of Idoc.
    If SNDPRN = 100 , message has to go to  http://10.190.25.16:8210/file/receiver
       SNDPRN = 200 , message has to go to  http://20.180.26.16:8210/file/receiver
    It is working correctly when I tried for single receiver. When I' tried to use DynamicConfiguration, it is coming in SOAP document but it is not working and not passing to correct channel.  According to this note 1039369, I mentioned the following modules.
    AF_Adapters/axis/AFAdapterBean  --->                 afreq
    AF_Adapters/axis/HandlerBean      --->                  xireq 
    AF_Adapters/axis/HandlerBean      --->                  dc
    AF_Adapters/axis/HandlerBean       --->                 remover        
    AF_Adapters/axis/HandlerBean       --->                 trp
    AF_Adapters/axis/HandlerBean        --->                xires       
    AF_Adapters/axis/AFAdapterBean    --->               afres
    xireq ->  handler.type-> java:com.sap.aii.axis.xi.XI30OutboundHandler
    dc    ->  handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
    dc   --->   key.1 --->      write http://sap.com/xi/XI/System/SOAP TServerLocation
    dc    --->          location.1  --->         context
    dc     --->         value.1      --->        transport.url
    remover    --->  handler.type    --->   java:com.sap.aii.axis.soap.HeaderRemovalHandler
    remover     ---> namespace    --->      http://sap.com/xi/XI/Message/30
    trp         --->     handler.type   --->    java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
    trp           --->  module.pivot  --->     true
    xires     --->    handler.type   --->    java:com.sap.aii.axis.xi.XI30OutboundHandler
    and I am getting the below error in SOAP-AXIS channel
    Error Axis:    error in invocation: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
    Error MP:     Exception caught with cause java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
    Error           Exception caught by adapter framework: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
    Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
    Kindly let me know if anyone has any idea what might be wrong?
    Thanks
    Deepthi

    I have a similar problem. I also like to add some header fields to my message und that's way I'm trying to use the AXIS adapter. (Axis adapter FAQ question 30) Unfortunately I'm getting exactly the same error message:
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
    Deepthi, you wrote that you have missed one jar file. Can you remember which file it was?

  • PI 7.11 Receiver SOAP (Axis) Adapter with MTOM (Attachments)

    Hello,
    Iu2019m trying to configure the Receiver SOAP (Axis) adapter for sending SOAP attachments via MTOM to a third-party webservice, but I'm not getting that PI transform the binary encode64 data in an payload element into a MTOM attachment (xop:include).
    The configuration looks like this:
    Transport Protocol: HTTP (Axis)
    SOAP Version: 1.2
    Encapsulation Format: MTOM
    Keep Attchments: enabled
    Payload Extraction: SOAP Body Child
    First of all, could you confirm if this is supported?
    Or Axis only supports MTOM for the transport protocol 'File (Axis)' like it seems refered in [Configuring the Receiver Axis SOAP Adapter|http://help.sap.com/saphelp_nwpi711/helpdata/en/45/a3c48c87cd0039e10000000a11466f/frameset.htm]
    Can you please provide me some guidance here?
    Thanks in advance!
    Kind Regards,
    Alexandre

    Hello,
    I am facing the exact same issue.
    I can't seem to set the cookie in the http header after following the guide.
    Cookie: WSL-credential=MyOwnCookie
    I managed to set the SOAPAction though.
    Anyone has any ideas?

  • SOAP (Axis) Adapter

    Hello XI SDNers,
    I want to use SOAP (Axis) Adapter for my Webservice Scenario.
    According to the SAP Note 1028961, I deployed the "aii_af_axisprovider.sda" file with corresponding ".jar" files from Apache AXIS 1.4 and the deployement was successful.
    But now, If I want to use this SOAP (Axis) Adapter, I am unable to see this adapter in my list, for ex., If I create a new "Communication channel"  in Configuration and want to select the new SOAP (Axis) Adapter, I couldn't see this in my list.
    Am I still missing something?
    -Satish.

    dear ..
    My system is  PI7.0 sp15.
    With  "http://host:port/XIAxisAdapter/MessageServlet" checking , everything corrected.
    All jars from axis-bin-1_4.zip and axis-src-1_4.zip .
    under " aii_af_axisprovider.sda\META-INF " has a " primary-library-sda-dd.xml " , content :
    <?xml version="1.0" encoding="UTF-8"?>
    <SDA>
         <SoftwareType>primary-library</SoftwareType>
         <engine-deployment-descriptor version="2.0" />
    </SDA>
    I don't know, why didn't list...

  • Error while passing URL Dynamically in SOAP AXIS adapter..!!

    Hi ,
    Idoc> XI>SOAP-AXIS
    I am doing a scenario where I need to pass the URL dynamically in SOAP-AXIS adapter by taking the RCVPRN of Idoc.
    If
    RCVPRN = 100 , message has to go to http://10.190.25.16:8210/file/receiver
    RCVPRN = 200 , message has to go to    http://10.190.25.16:8210/file/receiver2
    RCVPRN = 300 , message has to go to    http://10.190.25.16:8210/file/receiver3
    I used the below UDF and it is working correctly and generating the URL dynamically .
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey keyHeader1 = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/SOAP", "TServerLocation");
    conf.put(keyHeader1, a);
    return "";
    The value is coming in SOAP document as expected like below.
    <sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
      <sap:Record namespace="http://sap.com/xi/XI/System/SOAP" name="TServerLocation">http://10.190.25.16:8210/file/receiver3</sap:Record>
      </sap:DynamicConfiguration>
    I used the below Configuration modules in receiver SOAP-AXIS adapter as suggested in Note 1028961.
    AF_Adapters/axis/AFAdapterBean ---> afreq
    AF_Adapters/axis/HandlerBean ---> xireq
    AF_Adapters/axis/HandlerBean ---> dc
    AF_Adapters/axis/HandlerBean ---> remover
    AF_Adapters/axis/HandlerBean ---> trp
    AF_Adapters/axis/HandlerBean ---> xires
    AF_Adapters/axis/AFAdapterBean ---> afres
    xireq -> handler.type-> java:com.sap.aii.axis.xi.XI30OutboundHandler
    dc -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
    dc ---> key.1 ---> write http://sap.com/xi/XI/System/SOAP TServerLocation
    dc ---> location.1 ---> context
    dc ---> value.1 ---> transport.url
    remover ---> handler.type ---> java:com.sap.aii.axis.soap.HeaderRemovalHandler
    remover ---> namespace ---> http://sap.com/xi/XI/Message/30
    trp ---> handler.type ---> java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
    trp ---> module.pivot ---> true
    xires ---> handler.type ---> java:com.sap.aii.axis.xi.XI30OutboundHandler
    and I am getting the below error in SOAP-AXIS channel at the point java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender.
    2009-03-02 15:23:44 Success Axis: getting handler trp of java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
    2009-03-02 15:23:45 Error Axis: error in invocation: (500)internal server error
    2009-03-02 15:23:45 Error MP: Exception caught with cause (500)internal server error
    2009-03-02 15:23:45 Error Exception caught by adapter framework: (500)internal server error
    2009-03-02 15:23:46 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: (500)internal server error: (500)internal server error.
    2009-03-02 15:23:46 Error The message status set to NDLV.
    Kindly let me know if anyone has any idea what might be wrong?
    Note : The given URL is correct one because I cross checked by passing them normally by giving directly in adapter and they are all working and the message is going to receiver.
    Thanks
    Deepthi

    Hi Stefan,
    >> dc -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
    >> dc ---> key.1 ---> write http://sap.com/xi/XI/System/SOAP TServerLocation
    >> dc ---> location.1 ---> context
    >> dc ---> value.1 ---> transport.url
    >> Try read instead of write
    When I tried with this, I am getting the below error "Connection refused ".
    Success Axis: entering HandlerBean
    Success Axis: getting handler trp of java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
    Error Axis: error in invocation: java.net.ConnectException: Connection refused
    Error MP: Exception caught with cause java.net.ConnectException: Connection refused
    Error Exception caught by adapter framework: ; nested exception is: java.net.ConnectException: Connection refused
    Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: ; nested exception is: java.net.ConnectException: Connection refused: java.net.ConnectException: Connection refused.
    Success The message status set to WAIT.
    It is going successfully when I tried sending directly. Looks like Dynamic Configuration is not working for SOAP-AXIS.
    Any Suggestion?
    Thanks
    Deepthi.

  • Sender SOAP Axis adapter

    Hello Experts,
    my scenario is to pick the data from web service and pass it to ECC side.
    as i need to pick XML file from web service i used SOAP Axis adapter. configured as given in michal's blog.
    the channel in running no errors in RWB, still its not picking the data.
    Michal's PI tips: Exchange Rates from an XML file on a web page - REST, AXIS
    your inputs on this...
    regards,
    chinna

    Hi ,
    I have confifured the same folw, it's working for me. please provide if you are getting any error.
    Regards
    srinivas

  • How to install SOAP Axis adapter and where is it available  ??

    Hi,
    I heard that SOAP Axis adapter was not initially available for PI 7.0 and was introduced in some later support pack.When I checked the below url I found that some of the components are missing.
    http://xi-dev.intranet.com:50000/XIAxisAdapter/MessageServlet
    Can anyone please suggest how I can get that pack and where it will be available?
    How to install it?
    Thanks
    Deepthi.

    Hi Sunil,
    Dont mind...one final question, they mentioned in the README file as below.. 
    // Open the SDA archive using some unzip tool and replace the following empty
    jar files with the those inclued in Axis 1.4 src package
    axis.jar
    commons-discovery-0.2.jar
    commons-logging-1.0.4.jar
    commons-net-1.0.0-dev.jar
    wsdl4j-1.5.1.jar
    When i checked in the Axis folder, I found so many files.
    Do I need to just add this Axis zip file into aii_af_axisprovider.sda Archive file.?
    If possible, It would be very helpful if you send the aii_af_axisprovider.sda file which you have deployed into your system?
    Thanks
    Deepthi

  • Problem with XML on Linux

    hi everybody,
    I've a big problem with XML on Linux, in details I see my program stopping on Linux at the instruction
    XMLReader xr = XMLReaderFactory.createXMLReader("org.apache.crimson.parser.XMLReaderImpl");
    and it's strange because on Windows it runs and there aren't problems about permissions on files, does anyone knows what to do?
    thanks in advance!
    Stefano

    What happens on that line? I'm assuming you get some kind of error or exception.
    Make sure the JAR file for Crimson is in your classpath.

  • Problem with XML in APEX ORA-06502

    i, I have a problem with XML generation, I developed an application in APEX, and in a html page I have this process:
    declare
    l_XML varchar2(32767);
    begin
    select xmlElement
    "iva",
    xmlElement("numeroRuc",J.RUC),
    xmlElement("razonSocial", J.RAZON_SOCIAL),
    xmlElement("idRepre", J.ID_REPRE),
    xmlElement("rucContador", J.RUC_CONTADOR),
    xmlElement("anio", J.ANIO),
    xmlElement("mes", J.MES),
    xmlElement
    "compras",
    select xmlAgg
    xmlElement
    "detalleCompra",
    --xmlAttributes(K.ID_COMPRA as "COMPRA"),
    xmlForest
    K.COD_SUSTENTO as "codSustento",
    K.TPLD_PROV as "tpldProv",
    K.ID_PROV as "idProv",
    K.TIPO_COMPROBANTE as "tipoComprobante",
    to_char(K.FECHA_REGISTRO, 'DD/MM/YYYY') as "fechaRegistro",
    K.ESTABLECIMIENTO as "establecimiento",
    K.PUNTO_EMISION as "puntoEmision",
    K.SECUENCIAL as "secuencial",
    to_char(K.FECHA_EMISION, 'DD/MM/YYYY') as "fechaEmision",
    K.AUTORIZACION as "autorizacion",
    to_char(K.BASE_NO_GRA_IVA, 9999999999.99) as "baseNoGraIva",
    to_char(K.BASE_IMPONIBLE, 9999999999.99) as "baseImponible",
    to_char(K.BASE_IMP_GRAV, 9999999999.99) as "baseImpGrav",
    to_char(K.MONTO_ICE, 9999999999.99) as "montoIce",
    to_char(K.MONTO_IVA, 9999999999.99) as "montoIva",
    to_char(K.VALOR_RET_BIENES, 9999999999.99) as "valorRetBienes",
    to_char(K.VALOR_RET_SERVICIOS, 9999999999.99) as "valorRetServicios",
    to_char(K.VALOR_RET_SERV_100, 9999999999.99) as "valorRetServ100"
    xmlElement
    "air",
    select xmlAgg
    xmlElement
    "detalleAir",
    xmlForest
    P.COD_RET_AIR as "codRetAir",
    to_char(P.BASE_IMP_AIR, 9999999999.99) as "baseImpAir",
    to_char(P.PORCENTAJE_AIR, 999.99) as "porcentajeAir",
    to_char(P.VAL_RET_AIR, 9999999999.99) as "valRetAir"
    from ANEXO_COMPRAS P
    where P.ID_COMPRA = K.ID_COMPRA
    AND P.ID_INFORMANTE_XML = K.ID_INFORMANTE_XML
    xmlElement("estabRetencion1", K.ESTAB_RETENCION_1),
    xmlElement("ptoEmiRetencion1", K.PTO_EMI_RETENCION_1),
    xmlElement("secRetencion1", K.SEC_RETENCION_1),
    xmlElement("autRetencion1", K.AUT_RETENCION_1),
    xmlElement("fechaEmiRet1", to_char(K.FECHA_EMI_RET_1,'DD/MM/YYYY')),
    xmlElement("docModificado", K.DOC_MODIFICADO),
    xmlElement("estabModificado", K.ESTAB_MODIFICADO),
    xmlElement("ptoEmiModificado", K.PTO_EMI_MODIFICADO),
    xmlElement("secModificado", K.SEC_MODIFICADO),
    xmlElement("autModificado", K.AUT_MODIFICADO)
    from SRI_COMPRAS K
    WHERE K.ID IS NOT NULL
    AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
    AND K.ID BETWEEN 1 AND 25
    ).getClobVal()
    into l_XML
    from ANEXO_INFORMANTE J
    where J.ID_INFORMANTE =:P3_MES
    and J.RUC =:P3_ID_RUC
    and J.ANIO =:P3_ANIO
    and J.MES =:P3_MES;
    --HTML
    sys.owa_util.mime_header('text/xml',FALSE);
    sys.htp.p('Content-Length: ' || length(l_XML));
    sys.owa_util.http_header_close;
    sys.htp.print(l_XML);
    end;
    Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
    I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
    declare
    l_XML CLOB;
    begin
    --Oculta XML
    sys.htp.init;
    wwv_flow.g_page_text_generated := true;
    wwv_flow.g_unrecoverable_error := true;
    --select XML
    select xmlElement
    from SRI_COMPRAS K
    WHERE K.ID IS NOT NULL
    AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
    ).getClobVal()
    into l_XML
    from ANEXO_INFORMANTE J
    where J.ID_INFORMANTE =:P3_MES
    and J.RUC =:P3_ID_RUC
    and J.ANIO =:P3_ANIO
    and J.MES =:P3_MES;
    --HTML
    sys.owa_util.mime_header('text/xml',FALSE);
    sys.htp.p('Content-Length: ' || length(l_XML));
    sys.owa_util.http_header_close;
    sys.htp.print(l_XML);
    end;
    The error generated is ORA-06502: PL/SQL: numeric or value error+_
    Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+

    JohannaCevallos07 wrote:
    Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
    I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
    The error generated is ORA-06502: PL/SQL: numeric or value error+_
    Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+The likeliest explanation for this is that length of the XML exceeds 32K, which is the maximum size that <tt>htp.p</tt> can output. A CLOB can store much more than this, so it's necessary to buffer the output as shown in +{message:id=4497571}+
    Help us to help you. When you have a problem include as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
    And always post code wrapped in <tt>\...\</tt> tags, as described in the FAQ.
    Thanks

  • Problem with date format when ask prompt web-intelligence

    Bo XIR2 with 5 SP. Instaled on Windows 2003 with support Russian.
    Inside BO every labels, buttons - use russian. But when invoke web-report and Prompt appear there is problem with date format.
    Looks like korean format of date 'jj.nn.aaa H:mm:ss'.  I see system settings of date in Win .. everything right
    What i have to do?
    Where i can change format date for bo?

    GK, try this...
    decode(instr(packagename.functionname(param1 ,param2),'2400'), 0, to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" hh24mi'),'mm/dd/yyyy hh24mi'),'mm/dd/yyyy hh24mi'),
                                                                      to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" "2400"')+1,'mm/dd/yyyy "0000"'),'mm/dd/yyyy "0000"'))-Marilyn

  • Problem with Date format

    Got one more problem Merilyn and Radhakrishnan...
    Regarding the soln y provided me earler with the thread "Problem with date format"...
    What is happening is....I am able to change the 2400 to 0000 but when it is changed from 2400 on jan 1st to 0000 the hour is changing but not the date....the date still remains as jan 1st instead of jan 2nd....
    Eg: Jan 1st 2400 -- changed to -- jan1st 0000
    instead of jan 2nd 0000
    Could you please help me in this issue...
    Thanks,
    GK

    GK, try this...
    decode(instr(packagename.functionname(param1 ,param2),'2400'), 0, to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" hh24mi'),'mm/dd/yyyy hh24mi'),'mm/dd/yyyy hh24mi'),
                                                                      to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" "2400"')+1,'mm/dd/yyyy "0000"'),'mm/dd/yyyy "0000"'))-Marilyn

  • Problem with date format dd/mm/yyyy. But I need to convert yyyy-mm-dd.

    Dear friends,
    I have the problem with date format. I receiving the date with the format dd/mm/yyyy. But I can upload to MySQL only in the format of yyyy-mm-dd.
    how should I handle this situation, for this I've created these code lines.But I have some problem with these line. please help me to solve this problem.
    String pattern = "yyyy-mm-dd";
    SimpleDateFormat format = new SimpleDateFormat(pattern);
    try {
    Date date = format.parse("2006-02-12");
    System.out.println(date);
    } catch (ParseException e) {
    e.printStackTrace();
    System.out.println(format.format(new Date()));
    this out put gives me Tue Apr 03 00:00:00 IST 2007
    But I need the date format in yyyy-mm-dd.
    regards,
    maza
    thanks in advance.

    Thanks Dear BalusC,
    I tried with this,
    rs.getString("DATA_SCAD1")// where the source from .xls files
    String pattern = "yyyy-MM-dd";
    SimpleDateFormat format = new SimpleDateFormat(pattern);
    try {
    Date date = format.parse("DATA_SCAD1");
    System.out.println(date);
    } catch (ParseException e) {
    e.printStackTrace();
    System.out.println(format.format(new Date()));
    this out put gives me Tue Apr 03 00:00:00 IST 2007
    But I want to display the date format in yyyy-mm-dd.
    regards,
    maza

  • Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

    I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
    it gives error as "Can't open this file. There's a problem with file format".
    The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

    This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
    My files have to be compatible not just across readers but across operating systems.
    To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
    I personally test my PDFs using a variety of readers and PDF editors including
    PDF XChange (my favorite)
    Foxit (runner up for me and I recommend for most people)
    Adobe (the bloated monster)
    Nitro 9 (great for moving graphical elements around)
    ABBYY
    And the Nuance PDF Create toolsets
    Those are off the top of my head. There are a bunch on Android that I test with too.
    I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
    Here is what I've learned for my situation
    The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
    all fail using the built-in Windows 8/10 PDF reader.
    When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
    what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
    If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
    A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
    In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
     The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
    I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

  • A Problem with Region Format Settings

    Hi!
    I have a peculiar problem with Region Format settings on my iPod touch (Settings > General > International > Region Format). It appears that iPod touch can support more region formats than it is stated on that list. Once I registered my iPod, I selected my location, Lithuania, and it automatically set (I think because of this action, and not another, like my PC settings) Region Format to Lithuanian. Although it is nonexistent on the menu list! Good news!
    However, the problem is that while I explored my iPod I accidentally checked another region, and there is no "cancel" option. So my region switched to another. And now I am not able to switch it back to Lithuanian again because there is no such selection (reset or restore didn't help).
    Has anybody any suggestions how could I return to my preferred region format (Lithuanian)? Thanks!

    thats interesting. I think the ipod took those settings from your computer/mac.
    anyway, shouldn't there be something near you that has the same region format settings? maybe you can just use something that's exactly the same.
    and btw: some of the regions have arrows next to them which brings you to subregions of that region. maybe you should check that out?
    otherwise ... well ... I think only a restore would bring back the original settings.

Maybe you are looking for

  • Problem while 're-posting' a cancelle Invoice with Exchange Rate Difference

    Hi Gurus, We are facing a problem while re-posting an Invoice with Exchange Rate Difference. I say re-posting because this invoice was previously posted and reversed on the same date. Here is the scenario along with the relevant postings: 1) G/R is p

  • Click boxes and buttons not working in Captivate 3 published projects

    I really, really, hope that someone can help me... we are migrating from Centra/Saba LMS to Connect Pro LMS and while taking our "old" SCORM projects and posting them to the Connect Pro server we have encountered an issue...and the reason it's very h

  • How to delete an email address in Mail

    A friend of mine has just changed his email address but I cannot remove his old one from Mail. I have added his new address and removed the old one from my Address book but his old address still comes up as the default when starting a new email to hi

  • Flex file upload more than 100 MB

    Hi, Is there possibly any method where I can upload file to the server which are more than 100 MB? I've gone through the nice piece of code demonstrated at here : http://www.zehnet.de/2009/02/23/flex-fileupload-component/ , where it shown how we can

  • Simple answer needed to complex question

    I said "simple" because, although a Mac user for many years, I have no knowledge of the tech angle (which gets me in trouble regularly.) In the last few days, my Safari started getting very slow on my iMac. I searched the forums and saw a suggestion