SOAP channels in rwb showing error "No Adapters registered for this channel

SOAP channels in rwb is showing error "No Adapters registered for this channel",
what is the problem?
i tried to locate and restart the SOAP adapter from Visual admin, but couldnt find it in visual admin, pls help in locating it in visual admin

Hi,
In Visual Admin, Cluster tab --> Server -> Services -> Deploy --> Radiobutton Application
--> sap.com/com.sap.aii.af.soapadapter --> Press start / stop
This way youmay restart the SOAP adapter.
Also Please check if there is any cahce problem, Try to refresh it. & SAP Note- 856597
Thanks
Swarup

Similar Messages

No adapter registered for this channel (JDBC)

Hi guys!
I want to create a JDBC adapter, but when I check it in the CC monitoring, I get following "error" No adapter registered for this channel. What is missing in this installation? Or, what is wrong?
Thank you!
Olain

Hi guys!
version Service pack:10 Release: NW04S
Sarvesh, I don't know, what's done, cos' these thing are done by our basis team. But all adapter metadata seem to be there, cos' I'm able to create JDBC channel.
But in Adapter monitoring I can't select JDBC while others I can.
If I switch the combobox (Adapter monitoring) to "Only installed and started adapters", JDBC disappears.
But why are then metadata of JDBC visible? Why I am able to create communication channel of JDBC type?
So, what to do now to make JDBC work?
Thank you!
Olian

SOAP : No adapter registered for this channel

hello everybody,
i'm working with a PI 7.1
i have a interface RFC - PI - SOAP.
when i look on Communication Channel Monitor i see this error on my soap CC
No adapter registered for this channel
i restart J2ee and applicate CPA cache refresh.
i tryed to create a new soap cc but no result. still to have this problem.
Any suggestion?
thanks
Alex

HI Alex,
Edit the channel and do some dummy changes and activate again. also go to ID -> Menu Environment -> Clear SLD Data Cache. Also check the cache notifications.
Then perform CPACache refresh using PIDIRUSER and this url.
http://XIHost:JavaPort/CPACache/refresh?mode=delta
http://XIHost:JavaPort/CPACache/refresh?mode=full
If this does not work then you may check Visual Admin -> Soap Adapter service and restart it....
Thanks,
Naveen

RWB - No adapter registered for this channel (JDBC)

Hi Experts,
All my JDBC communication channels have the following log in RWB:
No adapter registered for this channel
When executing an interface, SXMB_MONI shows:
Object not found in lookup of SapXIJDBCAdapterService
We have aready performed a CPACache refresh as mentioned on another threads but the problem persists.
I performed dummy changes in the CC and even created a new one but the log still remains the same.
Please advise what else can be done to solve the issue. We are using PI 7.1.
Regards,
Daniela

Hello,
Try checking in the Netweaver Administrator if the JDBC service is running?
There is also a dependency of modules in between the SapXIJDBCAdapterService and SapXIFileAdapterService. Please check that the File Adapter service is started also.
Regards,
Sarah

Communication channel not working -- No Adapter Registered for this channel

Hi Experts,
I see the status of one of my Communication Channels (In RWB Communication Channel Monitoring) as
"No Adapter Registered for this channel".
I saw one of the threads related to this but could not fins a suitable reason for it as our issue seems to be different here.
We have recently deployed the SFTP adapter and PI team is testing this communication channel and they got this error.
I checked and found that SFTP adapter (in the JAVA EE applications) was not working and when I tried to start ,its giving error
failed to start.
additional status message as
Status Details: Cannot load class "com.advantco.pi.af.adapter.sftp.SPIManagedConnectionFactory". Possible reasons: 1) class file cannot be found in the JARs located in the RAR file,
2) class file cannot be found in referenced loaders,
3) failed to initialize some static block(due to unhandled exception),
4) failed to load or there is incompatibility with some native parts, or
5) cannot load a class related to it, due to some reasons above.
Could you guys suggest from where exactly is it trying to pick up the files.
is it u201Cu2026/j2ee/cluster/apps/xxxxxxx/SFTP Adapteru201D ????
Can anyone suggest the possible reasons and the root cause of it
Regards,
Yogi

Hi Yogi,
i am glad you solved the problem.
If you have any issue with the Advantco SFTP adapter, best is to send an email to "support at advantco.com" directly.
Peter Ha * SAP NetWeaver PI Architect * Advantco International LLC
www.advantco.com

No Adapter Registered for this channel

Hi,
I see the status of one of my Communication Channels (In RWB Mail Communication Channel Monitoring) as
"No Adapter Registered for this channel". Below is the error log.
com.sap.aii.af.service.administration.api.AdminException: No adapter registered for channel 3ee106ca190c3e259e9d8c203a602fee
at com.sap.aii.af.service.administration.impl.AdminManagerImpl.notifyChannelActivationStateChanged(AdminManagerImpl.java:851)
at com.sap.aii.af.service.administration.impl.cluster.ClusterManager.eventReceivedSync(ClusterManager.java:426)
at com.sap.aii.af.service.event.impl.worker.sync.SyncLocalWorker.work(SyncLocalWorker.java:52)
at com.sap.aii.af.service.event.impl.worker.sync.AbstractSyncWorker.startWork(AbstractSyncWorker.java:40)
at com.sap.aii.af.service.event.impl.EventManagerImpl.sendEventAndWaitForAnswer(EventManagerImpl.java:484)
at com.sap.aii.af.service.event.impl.EventManagerImpl.sendEventAndWaitForAnswer(EventManagerImpl.java:348)
at com.sap.aii.af.service.administration.impl.cluster.ClusterManager.notifyChannelActivationStateChanged(ClusterManager.java:280)
at com.sap.aii.af.service.administration.impl.AdminManagerImpl.setChannelActivationState(AdminManagerImpl.java:699)
at com.sap.aii.af.service.administration.impl.AdminManagerImpl.setChannelActivationState(AdminManagerImpl.java:625)
at com.sap.aii.af.service.administration.impl.AdminManagerImpl.setChannelActivationState(AdminManagerImpl.java:618)
at com.sap.aii.mdt.amt.channelmonitoring.SummaryChannelList.setChannelsActivationState(SummaryChannelList.java:1041)
at com.sap.aii.mdt.amt.channelmonitoring.ChannelMonitoringDynPage.process_activate(ChannelMonitoringDynPage.java:1621)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:102)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Thanks
Vijaya

Hi,
First check if you have imported the ESR content according to the note below (Apply the one
that corresponds to your XI/PI version:
PI 7.1X:
#1152640 - SAP NetWeaver 7.1 including EHP 1: Importing ESR content
XI 7.0:
#836200 - SAP NetWeaver 7.0: Importing Process Integration Content
XI 3.0:
#705541 - XI 3.0 (SP1 and higher): Importing XI Content
You can check the components in your SLD for the correct associations.
Also, if not solved, please clarify which adapter are you using for that (JMS, JDBC, ...).
Regards,
Caio Cagnani

No adapter registered for this channel FOR JDBC COMM CHANNEL

Hi Friends,
We installed JDBC driver(for Oracle) and it works correctly from Visual Administrator.
We have created comm channel 'jdbc_receiver'.
However, when we check in "Adapter Monitoring", it is not active (Green color) and short text says 'No adapter registered for this channel'. Where should we look further to resolve the issue ? How do we test this comm channel from XI box ?
Thanks.
Niranjan

Hi Niranjan,
How you solved the problem?
I have deployed JDBC driver (sqljdbc4.jar) according tohttp://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also.

SuccessFactors adapter "No adapter registered for this channel" issue

Hi Experts,
Scenario - SAP PO 7.4
Success Factor -> (SFSF Adaptor) PO (File Adaptor) -> File Share on PO server (Folder Name: SFSF/SFReceiver)
I am getting "No adapter registered for this channel" in the communication channel monitor.
Appreciate your help.
Srinu

Hi Srinivasulu,
Please can you go to NWA and have a look under Application Resources: Overview.
Search for the SuccessFactors adapter and make sure that the status on it is green.
This will always tell you if it was installed successfully.
Regards,
Jannus Botha

HT4623 I tried to update my ipad air to IOS 7.1 but it shows error that "The software for the iphone was corrupted during download" How can I fix this problem ?

I tried to update my ipad air from IOS 7.0.4 to 7.1 on iTunes. I clicked download and update, it started to download normally but when download finished iTunes shows error that "The software for the iphone was corrupted during download".
How can I fix this error ?

I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
In the terminal (it kept failing to download in Safari):
curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
Quit and relaunch iTunes.
Should now work for you.

FBCJ Error - Enter a vendor for this accounting transaction

Dear Experts,
I am trying to enter expenses and I have mentioned Vendor Account No. in the Vendor field using splitting option with combination of Vendor Pay/Rec and All Expenses Business Transaction. But the document is not getting posted and giving the error - "Enter a vendor for this accounting transaction". But if I dont use split option it saves.
This problem I am facing for the last 2 days only. Can you suggest what could be the reason for this error.
Thanks,
Deb

Dear !!!
I have done everything as you suggested, but it is still showing the same message. Can you please look in to this again.
Thanks in advance !!!!
Deb

Bonjour64 error: "The configuration data for this product is corrupt. Contact your support personnel."

Have use WinRAR to pull out only Bonjour64 from iTunes 11.1.5 (and prior releases) to do an install of only Bonjour, as all other iTunes-related software loads fine (have used 11.1.4 and new 11.1.5). I get the error: "The configuration data for this product is corrupt. Contact your support personnel." Have tried everything suggested on net and this forum, including uninstalling everything, cleaning registry, disabling firewall, etc. Not worthwhile to reinstal Windows 7. What do I do?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Error 150:30, "Licensing for this product has stopped working"

I recently updated my Mac OS, and am getting error 150:30, "Licensing for this product has stopped working" on all my CS4 products. The license repair tool will not launch in Mavericks. Help?

CS4 is completely unsupported under Mavericks and using an upgraded
operating system is nothing short of a crapshoot.
Unfortunately, you are completely on your own here.

HT1926 Have you gotten the error "a program required for this install could not be run"

Whenever I try to install iTunes on my Windows 7 PC, I get the error" a program required for this install could not be run". Any ideas?

Burwood, that tip says to repair the Apple Software Update module. I went through the process of uninstalling all Apple programs from my computer first, so that's not the problem (and it's not installed, so it can't be repaired).
I tried installing iTunes with the "automatically update" box unchecked as well, to no avail. Any ideas?

SharePoint Error "The security validation for this page is invalid" when delete an item

Hi,
I have SharePoint 2010 setup and works fine until today all of a sudden it throws error "The security validation for this page is invalid" when delete a SharePoint document or list item.
There is no custom event handler deployed on library/list, and it should not be account issue as the same account works yesterday, and even after I turn off security validation from Central Admin, it still doesn't work.
The only change I did is turn off Dynamic Compression from IIS, after that I tried enable back Dynamic Compression but it still doesn't work.
Does anyone know what could be the possible reasons? Thanks in advance.

hi,
in the page just try to make this :
<SharePoint:FormDigest runat="server" />
PrasadWT

In perfdatasource querying for global snapshot failed with error 'the size limit for this '

I received scom alerts from two win 2k8 r2 servers , hosting exchange 2010 mailbox roles , the alerts came almost in same time from both servers ,
can I ignore those alerts
or can someone give a me a clue how can I troubleshoot those alert , please any help would be appreciated
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
from Ops-mgmt logs
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 1
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.OperatingSystem.PercentMemoryUsed.Collection
Instance name: Microsoft Windows Server 2008 R2 Enterprise
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 1
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.LogicalDisk.PercentIdle.Collection
Instance name: " edb file path "
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 2
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.NetworkAdapter.CurrentBandwidth.Collection
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 2
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.ForefrontProtection.FPE.Server.PerformanceCollection.RealtimeScanMessageRate

Hi Blake ,
Thanks for your reply , I appreciate your help ,
I didn't put the alert from scom console because they were same as the events ( same source )
Health Service Modules, I didn't want to spam
more :-)
also the two servers encountered the issue were mailbox servers and part of same DAG , it worth mention the alert were resolved
by Exchange 2010 Correlation Engine service
http://blogs.technet.com/b/kevinholman/archive/2010/10/15/clustering-the-exchange-2010-correlation-engine-service.aspx
http://support.microsoft.com/kb/2592561
also the Opsmgmt logs are full of waring and error event like 2023 , 21402 , 21403 , 1207 !!
Log Name: Operations Manager
Source: HealthService
Date:
Event ID: 2023
Task Category: Health Service
Level: Warning
Keywords: Classic
User: N/A
Computer: server 1
Description:
The health service has removed some items from the send queue for management group "SCOM" since it exceeded the maximum allowed size of 15 megabytes.
1- alert from console >>
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.OperatingSystem.PercentMemoryUsed.Collection
Instance name: Microsoft Windows Server 2008 R2 Enterprise
EventSourceName: Health Service Modules

SOAP channels in rwb showing error "No Adapters registered for this channel

Similar Messages

Maybe you are looking for