SOAP error in synchronous scenario for ABAP Proxy with Oracle D/B

Dear Experts,
I am working in Sender ABAP Proxy <====>SAP PI 7.31 JAVA only <====> Oracle Database. My proxy configuration are working successfully.
Apart from that, I have maintained a SOAP sender communication channel under the ECC business system with
Transport Protocol as HTTP
Message Protocol as XI 3.0
Adapter Engine as Central Engine
When I am testing from ECC at Tx SPROXY, I am receiving following error.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface at com.sap.aii.adapter.soap.web.SOAPHandler.processSOAPtoXMB(SOAPHandler.java:746) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:505) at javax.servlet.http.HttpServlet.service(HttpServlet.java:754) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at
1. In XI3.0 protocol, I can not select BE but when selected HTTP 1.0 as Message protocol then I can find the BE.
2. No Response message is shown in ECC when testing the message.
3. How do Receiver JDBC adapter for Oracle Database is configured
4. What would be Message Protocol for Oracle Database i.e. XML SQL Format or Native SQL format for Select operation.
Please guide.. All your inputs will be appreciated......
Regards
Rebecca

Dear Indrajit,
Appreciate your inputs.. Yes I have configured all the ABAP proxy configurations and there no question of missing any thing as Tx SLDCHECK in ECC is working perfectly fine.
But still to go, some of the queries needs more input.
1.In ID, i have created a Sender SOAP communication channel with listed details.
Transport Protocol as HTTP
Message Protocol as XI 3.0
Adapter Engine as Central Engine
Is there any parameters which I may be missing from Module tab of Synchronous SOAP Cc ?
2. In the Cc monitoring, the JDBC receiver status shows "Database operation successfully completed" but I could not find any response data from database. The Message monitoring should have 2 messages for 1 trigger, but I could find only 1 message by SOAP only?
Sorry to bother experts...Please answer in sequence...
Regards
Rebecca

Similar Messages

Message flow in SAP PI 7.31 JAVA only for ABAP Proxy synchronous scenario with Oracle DB

Dear Experts,
I am working on a synchronous scenario Sender ABAP Proxy <===> SAP PI 7.31 JAVA only <===> Oracle Database.I have successfully
configured all the proxy configurations as well both Sender SOAP and JDBC receiver channels are showing no error when pinged from
Cc monitoring in NWA.
1.During testing at Tx SPROXY , I am triggering a message and after 5 minutes I receive an PARSING error message with 2 messages in ECC
local IE i.e. Tx SXMB_MONI.
Note : In NWA , I can see only 1 message that too in cancelled status.
2.Seeing the trace of the messages I assume that the messages have not moved from sender ECC system. I am still confused with flow of message
from the Message Audit log. Audit log of error messages.Could any one share the full Audit log of a successful message generated in SAP PI 7.31 JAVA only.
3.I observed that the QIN Scheduler status in ECC is in INACTIVE status. There is no queue id for 2 messages generated in ECC. Does
it should in ACTIVE status in Tx SMQR..
Regards
Rebecca

Hi Thomas,
Valuable inputs..
1. Since I don't have any audit log for successful message, would you be able to share referring to the
below screenshot whether the message was put into receiver JDBC adapter and JDBC adapter tried to retrieve the Select response from Oracle Database.
2.I have done some setting in Advance mode of the receiver JDBC to increase the time out and other parameters as per SAP note but still the issue is same. If you perhaps have some experience in such scenarios, please share some input so that I can ask the Oracle Database administrator exactly what is required from our side.
3.Regarding the slow response from Oracle , there was some suggestion that the datatype of the request and response should match the column name of the Oracle database. I did that.. Do you have any more suggestion that may be hampering the generation of the response message from the Oracle like SAP note or document.
Regards
Rebecca

Creation of package structure for ABAP proxy scenario

Hi All,
I have a doubt on package structure used for ABAP proxy scenario. What is the specific reason to create a four level package structure? Can some one please explain? Thanks in advance.
Regards,
Sudheer.

Hi Sudheer,
Can you pls clarify what do you mean by 'four level package structure' ?
Are you referring to the ABAP structures that get created during creating the proxy by SPROXY transaction ? These structures get automatically created. We simply have to write the code using these structures.
Or do you mean the 'package' which is mandatory to create a transportable ABAP object ? i.e. transport from Development to Staging and then Production.
Regards,

Getting error back to XI for Asyn Proxy scenario

Hi All,
I am working on proxy scenario. i am using fault message type for rising exception and scenario is asynchronous. if ther is any application is throwing some exception, now it is not coming to xi. we can monitor it in R3. but i need to rise alert if ther is any application error. is ther any way to get the error back to XI for async proxy scenario...?
Please help me
Regard
Pradeep P N

Hi
I will explain my scenario, suppose the message from xi reaches R3 succefully, but due to some back end configuration the data is not getting updated(eg for creating sale order ther should be some back end configuration), in that case the proxy will raise exception and message will get failed in R3, i can monitor that in SXI_MONITOR in R3 as failed. but for XI it is success, When ever a message is getting failed in R3, i need to rise one exception.
In XI sxi_monitor i can see it as success, but in message monitoring while monitoring Proxy Bussiness system i can show the status as Apllication error, if iam aable to get this proxy business system in Alert configuration then i think we can rise alert. is ther any way to get proxy business system with Adapter engine and Integration engine. Please help me....
Regards
Pradeep P N

Prerequisites to configuration for ABAP Proxy -???

My scenario is file->XI->R/3(abap server proxy).
Xi and R/3 are 2 seperate business systems
-Abap server proxy created on R/3 business system. R/3 client 550
-Xi client 400.
-SLD is common for both XI and R/3
My question is in reference to the below message thread:
1.I understand all the below configuartaion has to be done on R/3 business system, tell me am I correct
2. are these configuartion needed for client proxy as well as server proxy also?
HTTP_RESP_STATUS_CODE_NOT_OK
The prerequisites to configuration for ABAP Proxy include: (landscape dependent)
1. The business systems should be based on SAP Web AS 6.20 and SAP Web AS 6.20 kernel patch level above 1253
2. You have installed the XI Add-On in each of these business systems as described in the Installation Guide SAP Exchange Infrastructure 3.0
3. The business systems and your central Integration Server are maintained in the System Landscape Directory (SLD).
Configuration required on the Business System:
1. Create HTTP connection in the business system.
Configuration Details:
Technical Setting:
1. Following Inputs are required for technical setting
1 Connection Type: H
2 Target Host: System name
3 Service Number: HTTP Port name
4 Path Prefix: /sap/XI/engine/?type=entry
Logon Security
On the Logon/Security tab page, enter the following logon data:
1 User: XIAPPLUSER (for example); this user should represent the sending business system (see also the SAP XI Security Guide under Service Users for Message Exchange).
2 Password: the password you have specified for this user
3 Client: SAP XI Integration server
4 Language: Language required
2. Configuration Business system as local Integration Engine.
1. Goto Transaction SXMB_ADM
2. Choose Edit --> Change Global Configuration Data.
3. Select Role of Business System: Application system
4. Corresponding Integration server: dest://<HTTPDESTINATION>. Here <HTTPDESTINATION> SAPISU_XID created in step 1. Dest://SAPISU_XID.
5. Under Specific Configuration Data you can specify additional configuration data
1.Select the relevant category under Specific Configuration Data.
2.Choose Change Specific Configuration Data.
For ABAP Proxies, Add the following configuration:
1.Category RUNTIME
2.Parameters: IS_URL
3.Current Value: dest://SAPISU_XID
Configuration of the Integration Engine
3. Connection between Business System and System Landscape Directory
1. Create RFC destination (TCP/IP) LCRSAPRFC and SAPSLDAPI for the SLD connection.
1.Execute transaction SM59 in the business system.
2.Choose Create.
3.Enter at least the following:
1.RFC Destination: LCRSAPRFC
2.Connection Type: T
3.Description: <your description>
4.Choose ENTER.
5.Choose the Technical settings tab page and do the following:
6.In the Program ID field under Registered Server Program, enter LCRSAPRFC
7.This program ID must correspond to a program ID specified in the RFC engine settings of the SAP J2EE Engine on the Integration Server host.
RFC Destination
2. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
Program ID: LCRSAPRFC
Gateway Host: <Integration Server host>
Gateway Service: <Integration Server gateway service>
Number of process: 3
4. Under Repository specify the following:
Application Server: <Integration Server host>
5. Choose Set.
3. Maintain SLD access details in Transaction SLDAPICUST
1. You can reuse this program ID for all Business systems
2. If there is HTTP error during connection, first run transaction SLDCHECK in the Business system. Also check that HTTP connection is working fine.
3. In XI Adapter use HTTP connection rather then giving R/3 input details as this is easier to transport and maintenance
4. One receiver adapter can be used for all Interfaces connecting to a Business system.
Thanks for your reply in adavnce.
KK

2. are these configuartion needed for client proxy as well as server proxy also?
>>>>
the configuration is one time thing and your R3 will act as a server or client according to the data being sent or received.
In R3 a point to be noted is that in SXMB_ADM -> Intg. Engine Confg. -> Role of Business System sud be as a Application System.
Ref: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Message was edited by: Shabarish Vijayakumar

What are the pre-requisite for ABAP Proxy communication?

What are the pre-requisite for ABAP Proxy communication?

hi,
How to create proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
How to Activate Proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Server Proxies (Inbound Proxy)
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
OutBound Proxy (Client Proxy)
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Debug your inbound ABAP Proxy implementation
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
regards
srinivasreddy

SOAP to Abap Proxy with attachment

Hi Experts,
i am facing one problem while developing one interface from SOAP to ABAP Proxy with attachment.
the sender system is sending empty soap message but with all its content in the attachment.
we need to parse the attachment and send the data to ECC system through proxy.
we made some research on SDN and found out that in sender soap adapter PayloadSwapBean is not supported.
however in receiver XI adapter the module tab is not editable.
could you suggest any solution to handle this interface?
thanks in advance.

Hi Aditya,
Can you just try to use SOAP with Servlet(Axis) protocol, since standard SOAP sender does not allow modules to be used.
please refer http://help.sap.com/saphelp_nw04/helpdata/en/45/a39e244b030063e10000000a11466f/frameset.htm
The first attachment is put in the main payload; further attachments become attachments of the XI message.
http://help.sap.com/saphelp_nw70/helpdata/EN/45/a4f8bbdfdc0d36e10000000a114a6b/frameset.htm
Regards,
Srinivas

How to configure systems for ABAP Proxy use

Can somebody please point me to the documentation regarding the configuration settings for the use of ABAP proxies, on both the XI and client sides? I have performed readiness checks as specified by SAP, the ABAP Proxy tests all pass, yet when I write a program with a proxy, the message does not appear in the integration engine monitor.
I think I have missed something in configuration settings, but don't know for sure. hence the request.
Kind Regards,
Tony.

Hi,
Please follow the below configuration steps for ABAP proxy:
ABAP Proxy configuration:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Thnx
Chirag

What technlogy is good for ABAP developer with some littile knowdge of java

Hi Experts,
What technlogy is good for ABAP developer with some littile knowdge of java IN SAP NETWEAVER.
Can any one guide me for good technology for todays market.
Thanks
Edited by: sdnhelp on Jul 15, 2009 1:50 PM
Edited by: sdnhelp on Jul 15, 2009 1:51 PM
Edited by: sdnhelp on Jul 15, 2009 1:51 PM

Hi,
you can choose PI of netweaver.
Regards,
Muralidhar

Synchronous scenario for SOAP to PROXY

Dear Experts,
    I will be working on the following scenarios.
XI will expose the Outbound Interfaces as a Web Service Interface. Web Service Description (WSDL File) will be generated for the Interfaces in Integration directory. DSS (decision support system) will use this WSDL file to define the data types and develop the Web Application. The Web Application sender sends the request message (Start Date, End Date and Table name) synchronously to XI using SOAP Adapter as communication channel. XI sends the message to SAP R/3 via ABAP Proxy. The ABAP Proxy extracts the data from SAP R/3 and sends the data back to XI . XI further passes on the data to DSS.
Request
Sender Application:     DSS
Target Application:     SAP R/3
Sender XI Adapter:     SOAP
Receiver XI Adapter:     XI
Response
Sender Application:     SAP R/3
Target Application:     DSS
Sender XI Adapter:     XI
Receiver XI Adapter:     SOAP
It's a synchronous interface. Please help me out right from the SLD design. I just want an idea how to proceed with this.
How many mapping will have to do? also very important point , can any one help me out, how to write an ABAP proxy for the same. I will have rewards for every answer as time is very very less and work is more.
Thanks
Veeru

Viru ,
So the Business systems will Web as ABAP for ECC and other will be third party. I am right.
Yes
Can u suggest me how to proceed with the mapping. Any snap shots for this scenario?
Mapping will be simple using Mapping editor in IR .
If u have please provide me.
for your refernce :
Few proxy based scenarios :
http://help.sap.com/saphelp_nw04/helpdata/en/2b/f49b21674e8c44940bb3beafd83d5c/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/85/78af1bf407434796aaf8dbd6d4e7b7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a5/1b5342d8a7be30e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a5/1b5342d8a7be30e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
/people/prasad.ulagappan2/blog/2005/06/27/asynchronous-inbound-java-proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d4db211-0d01-0010-1e8e-9b07fc2113ab
http://help.sap.com/saphelp_bw30b/helpdata/en/64/30063c66171b3de10000000a11402f/content.htm
I am working on XI 3.0 for this scenario. how to handle the webservices here.
for Web service based scenarios :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
Regards ,

Pipeline error for abap proxy to IDoc scenario

hi experts,
i am getting the following system error in moni for my proxy to idoc scenario.
In error it shows :
"Receiver service cannot be converted into an ALE logical system"
but i have checked adapter specific attributes of both receiver
and sender sys and they both have logical systems ( SO this is not the problem)
TRACE
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
pls suggest .
Appropriate points will be awarded

Hi,
Copy the payload from moni and test the mapping.
The error may be due to XML file generated by sender channel is not proper.
and also look at this blog
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Please reward points if it helps
Thanks
Vikranth

[MESSAGE.GENERAL] How can take the actual error text for ABAP proxy error?

Hi...
I'm a ABAPer.
I got to create outbound abap proxy for synchronous server proxy and described below.
My problem is program can not catch the actual error message when occurred error during send data to XI.
The return message is just 'MESSAGE.GENERAL'.
But according to the XI part, 'Key error' is actual reason.
So... how can i take the actual error text like 'Key error'?
* Only MESSAGE.GENERAL is return message for all kind of errors.
Thanks.
Below----
TRY.
 CREATE OBJECT abap_proxy.
 CALL METHOD abap_proxy->execute_synchronous
 EXPORTING
 output = gs_out
 IMPORTING
 input = gs_in.
Exception Handling
 CATCH cx_ai_system_fault INTO go_sys_exception.
 g_sys_result = go_sys_exception->get_text( ).
 CATCH cx_ai_application_fault INTO go_app_exception.
 g_app_result = go_app_exception->get_text( ).
ENDTRY.
COMMIT WORK.
Return status 'D' is succeeded.
if gs_in-sales_group_rer_sap-xstat <> 'D'.
 WRITE:/ 'System Error Message :', g_sys_result.
 WRITE:/ 'Application Error Message :', g_app_result.
endif.
*--Result--
System Error Message : MESSAGE.GENERAL
Application Error Message :
Message was edited by: Miju cho
Message was edited by: Miju cho

Thanks guys, this was useful.
My scenario is for Asynchronous communication.
I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
Have i got this right?
I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
The following receivers support acknowledgments:
ABAP and Java proxies (XI 3.0 SP1 for the latter)
Integration processes
IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
Receiver adapters support system acknowledgments but not application acknowledgments
My Receiver is JDBC. So I guess I cannot use acknowledgements either.
Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
I'll tell you abt what happened earlier.
My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
I need to handle such errors...ie. If the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
Thanks and Regards,
Ashwin

Error Handling for ABAP Proxy sender

Hello Everyone,
I am trying out a scenario of SAP R/3 to Oracle database (ABAP Proxy to JDBC).
I have the following code and it works fine.
CALL METHOD prxy->execute_asynchronous
      EXPORTING
        output = it.
     commit work
CATCH cx_ai_system_fault .
    DATA fault TYPE REF TO cx_ai_system_fault .
    CREATE OBJECT fault.
    WRITE :/ fault->errortext.
I know that the above Catch block would be used to handle system errors on the sender side.
Please tell me what kind of errors could these be and what I can do to test these errors. ie. I want to create error situations explicitely and see how they are handled.
Thanks and Regards,
Ashwin

Thanks guys, this was useful.
My scenario is for Asynchronous communication.
I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
Have i got this right?
I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
The following receivers support acknowledgments:
ABAP and Java proxies (XI 3.0 SP1 for the latter)
Integration processes
IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
Receiver adapters support system acknowledgments but not application acknowledgments
My Receiver is JDBC. So I guess I cannot use acknowledgements either.
Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
I'll tell you abt what happened earlier.
My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
I need to handle such errors...ie. If the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
Thanks and Regards,
Ashwin

For R/3 to CRM Scenario ,creating ABAP Proxy for CRM which is in Target

In R/3 to CRM scenario it is ok creating ABAP Proxy for CRM which is Target system.if it is possible it is Client Proxy.it is correct or not

Hi,
Client Proxy. When you need to create Proxy for your Sender system then the proxy is generated on the client side and the Class created in Proxy generation is called in a report/FM etc.
Server proxy. The server proxy is created when you are sending the data from SAP XI to the receiving system.
The generation of proxy in both the cases happens on the sender or the receiver system.
Regards
Vijaya

Response message error in queue when using ABAP proxy

I am using an abap proxy for the first time, and some of the response messages are getting stuck in the sender's (R/3) inbound queue. To resolve them, I have to either reset the status or execute the LUW. Sometimes, this doesn't even work.
Here is my "asynchronous" scenario:
R/3 -> <proxy> -> PI -> <file adapter> -> File
The R/3 system that I'm using has not used PI before, so I'm thinking something is missing from the set-up on the R/3 side. On the errors I finally do get to process, I get the following error in the SXMB_MONI on the sender (R/3) side (the PI SXMB_MONI shows successful). Can someone help me understand what a response message is and how it is different from an acknowledgement? Also, help me to understand what could be causing the response messages to get stuck in the R/3 queue.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
 - <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
 <SAP:Context />
 <SAP:Code p1="MessageId"
 p2="4962B2EDB60A003BE1008000A2844D1A"
 p3="00000000000000000000000000000000"
 p4="">PROTOCOL.WRONG_HEADER_IN_RESPONSE</SAP:Code>
 <SAP:Text language="EN">Response message header contains the value 00000000000000000000000000000000 in element MessageId instead of the expected value 4962B2EDB60A003BE1008000A2844D1A</SAP:Text>
</SAP:ErrorHeader>

Ultimate testing tool for services is soapUI (Freeware)
http://www.soapui.org/
If you can invoke your service from soapUI and you receive a response, then PeopleSoft is working fine and the request handling in the calling system is incorrect.
Try downloading soapUI and try invoking your service (not that a fan of SendMaster).
Hakan

SOAP error in synchronous scenario for ABAP Proxy with Oracle D/B

Similar Messages

Maybe you are looking for