SOAP Implementation missing methods

Hello,
I am developing a document based SOAP web service and I wish to add a
DOM Document to the SOAP Body. Looking at the Java 2 Platform
Enterprise Edition 1.4 specification on the Sun web site I have found
the following method "public SOAPBodyElement addDocument(Document
document)", which does exactly what I require. Although when I attempt
to call this method I get the following exception:
java.lang.AbstractMethodError:
weblogic.webservice.core.soap.SOAPBodyImpl.addDocument(Lorg/w3c/dom/Document;)Ljavax/xml/soap/SOAPBodyElement;
Has this method not been implemented in Weblogic 8.1? Any suggestions
would be very much appreciated.
Thanks, Stuart

Hi Stuart,
The addDocument(org.w3c.dom.Document) method was introduced in SAAJ 1.2. The SAAJ
implementation in WLS 8.1 is version 1.1. SAAJ 1.2 will be supported in a future
service pack or release.
For now, you can still achieve what it sounds like you want to do (i.e. send the
XML contained in an org.w3c.dom.Document to a "document-style" web service, as
the immediate child element of the <SOAP-ENV:Body> element, in the SOAP request
message), using the javax.xml.rpc.Call object. You just need to call the setProperty(Call.OPERATION_STYLE,
"document") method, on the Call object you create in your web service consumer
code. You don't have to do this with a Stub model web service consumer, because
the WSDL will (or should) have a style="document" attribute, on the <soap:binding>
element :-)
Regards,
Mike Wooten
Stuart Williamson <[email protected]> wrote:
Hello,
I am developing a document based SOAP web service and I wish to add a
DOM Document to the SOAP Body. Looking at the Java 2 Platform
Enterprise Edition 1.4 specification on the Sun web site I have found
the following method "public SOAPBodyElement addDocument(Document
document)", which does exactly what I require. Although when I attempt
to call this method I get the following exception:
java.lang.AbstractMethodError:
weblogic.webservice.core.soap.SOAPBodyImpl.addDocument(Lorg/w3c/dom/Document;)Ljavax/xml/soap/SOAPBodyElement;
Has this method not been implemented in Weblogic 8.1? Any suggestions
would be very much appreciated.
Thanks, Stuart

Similar Messages

Implementation missing for method "%_ONLAYOUT". "%_ONLAYOUT".

Hi,
After transport, getting an a dump while executing BSP applicaiton in QA.
After looking at the dump I understand its because of syntax error in CL_O23Y5C5WOKYR0QODKI9XCZJLYKX.
Error: Implementation missing for method "%_ONLAYOUT".
I am not sure when this object is generated, while developing the BSP application. [I found this class/interface in DEV, QA environment; But there is no entry for this class in any of the transports].
To resolve the issue, Do I need to re-transport? If yes, which componant should be transported again.
Hints Please. I have to close this as early as possible.
Thanks,
Pramod.

Thanks for all your inputs.
Somehow the problem is resolved after activating the class.
btw, Class which I refered in my posting is related to a View in BSP application that we have devloped.
Regards,
reddy

Error : Implementation missing for method 'Constructor'

Hi all,
I have a class(Class Z_CL_A) with attribute 'G_myattribute' and with
1. constructor importing 'L_myattribute'.
2. method 'my_method' exporting table 'EXP_mytable' type 'mytable_type'
There are no syntax errors in 1 & 2.But when I try to activate the class,it says 'implementation missing for method "Constructor".
Here is my class:
class Z_CL_A definition
public
create public .
" public components of class Z_CL_A
" do not include other source files here!!!
public section.
data G_myattribute type myattribute_type .
methods CONSTRUCTOR
    importing
      L_myattribute type myattribute_type .
methods MY_METHOD
    exporting
      !EXP_mytable type mytable_type .
Please let me know what is missing in the class
Thanks
Kukku

You have defined a class with variables and methods but what about implementation. Every class should have a definition and an implementation part.
class Z_CL_A implementation
methods CONSTRUCTOR
importing L_myattribute type myattribute_type .
*Put your code here.*
end method.
methods MY_METHOD
exporting !EXP_mytable type mytable_type .
*Put your code here.*
End method.
Edited by: Naren K Someneni on Jul 16, 2008 3:52 PM

Missing method body or declare abstract error

Hi!
I have been working on this simple Java 1.3.1 program for three days now and cannot figure out what I am doing wrong. If anyone has done the "Building an Application" tutorial in the New to Java Programming Center, you might recognize the code. I am trying to set up a frame with panels first using the BorderLayout and then the FlowLayout within each section of the BorderLayout. It will have textfields and checkboxes. I am working on the code to retrieve the user input from the text boxes and also to determine which checkbox the user has checked. Here is my code: (ignore my irrelivent comments!)
import java.awt.*;
import javax.swing.*;
import java.io.*;
import java.awt.event.*;
import java.awt.Color.*;
import java.awt.Image.*;
//Header Comment for a Routine/Method
//This method gathers the input text supplied by the user from five text fields on the Current
//Purchase tab of the tabbed pane of the MPGLog.java program. The way it gathers the text
//depends on the current processing state, which it retrieves on its own. It saves the text to
//a text file called textinput.txt.
public class CollectTextInput extends JPanel implements ActionListener
{ // Begin class
     //Declare all the objects needed first.
     // These are the text fields
     private JTextField currentMileage;
     private JTextField numofGallonsBought;
     private JTextField dateofPurchase;
     private JTextField pricePerGallon;
     private JTextField gasBrand;
     // Declaring the Labels to go with each TextField
     private JLabel lblcurrentMileage;
     private JLabel lblnumofGallonsBought;
     private JLabel lbldateofPurchase;
     private JLabel lblpricePerGallon;
     private JLabel lblgasBrand;
     // Declaring the Checkboxes for the types of gas bought
     private JCheckBox chbxReg;
     private JCheckBox chbxSuper;
     private JCheckBox chbxUltra;
     private JCheckBox chbxOther;
     private JCheckBox chbxHigher;
     private JCheckBox chbxLower;
     // Declaring the Buttons and images needed
     private JButton enter;
     private JButton edit;
     //private JButton report; //Will be used later
     private JLabel bluecar;          //Used with the ImageIcon to create CRV image
     private JPanel carimage;     //Used in buildImagePanel method
     private JPanel datum;          //Used in buildDatumPanel method
     private JPanel gasgrade;     //Used in buildGasTypePanel method.
     //Declaring the Panels that need to be built and added
     //to the border layout of this panel.
     //private JPanel panlimages;
     //private JPanel panltextinputs;
     //private JPanel panlchkBoxes;
     // Class to handle functionality of checkboxes
     ItemListener handler = new CheckBoxHandler();
     // This is where you add the constructor for the class - I THINK!!
     public CollectTextInput()
     { // Opens collectTextInput constructor
          // Must set layout for collectTextInput here
          // Choosing a BorderLayout because we simply want to
          // add panels to the North, Center and South borders, which, by
          // default, will fill the layout with the three panels
          // we are creating
          setLayout(new BorderLayout());
          //Initialize the objects in the constructor of the class.
          //Initialize the textfields
          currentMileage = new JTextField();
          numofGallonsBought = new JTextField();
          dateofPurchase = new JTextField();
          pricePerGallon = new JTextField();
          gasBrand = new JTextField();
          // Initialize the labels that go with each TextField
          lblcurrentMileage = new JLabel("Enter the mileage at the time of gas purchase: ");
          lblnumofGallonsBought = new JLabel("Enter the number of gallons of gas bought: ");
          lbldateofPurchase = new JLabel("Enter the date of the purchase: ");
          lblpricePerGallon = new JLabel("Enter the price per gallon you paid for the gas: ");
          lblgasBrand = new JLabel("Enter the brand name of the gas: ");
          //Initialize the labels for the checkboxes.
          chbxReg = new JCheckBox("Regular ", true);
          chbxSuper = new JCheckBox("Super ");
          chbxUltra = new JCheckBox("Ultra ");
          chbxOther = new JCheckBox("Other: (Choose one from below) ");
          chbxHigher = new JCheckBox("Higher than Ultra ");
          chbxLower = new JCheckBox("Lower than Ultra ");
          //Initialize the buttons that go on the panel.
          enter = new JButton("Save Data");
          edit = new JButton("Edit Data");
          //Initialize the image that oges on the panel.
          bluecar = new JLabel("2002 Honda CR-V", new ImageIcon("CRVBlue.jpg"),JLabel.CENTER);
          // Now bring it all together by calling the other methods
          // that build the other panels and menu.
          buildImagePanel();
          buildDatumPanel();
          buildGasTypePanel();
          // Once the methods above build the panels, this call to add
          // them will add the panels to the main panel's border
          // layout manager.
          add(datum, BorderLayout.NORTH);
          add(carimage, BorderLayout.EAST);
          add(gasgrade, BorderLayout.CENTER);
     } // Ends the constructor.
        // This method creates a panel called images that holds the car image.
     public void buildImagePanel();
     { // Opens buildImagePanel.
          // First, create the Panel
          carimage = new JPanel();
          //Second, set the color and layout.
          carimage.setBackground(Color.white);
          carimage.setLayout(new FlowLayout());
          // Third, add the image to the panel.
          carimage.add(bluecar);
     }// Closes buildImagePanel
     //This method creates a panel called datum that holds the text input.
     public void buildDatumPanel();
     { //Opens buildDatumPanel
          // First, create the Panel.
          datum = new JPanel();
          //Second, set the background color and layout.
          datum.setBackground(Color.white);
          datum.setLayout(new GridLayout(2, 4, 20, 20));
          //Third, add the textfields and text labels to the panel.
          datum.add(lblcurrentMileage);
          datum.add(currentMileage);
          datum.add(lblnumofGallonsBought);
          datum.add(numofGallonsBought);
          datum.add(lbldateofPurchase);
          datum.add(dateofPurchase);
          datum.add(lblpricePerGallon);
          datum.add(pricePerGallon);
          datum.add(lblgasBrand);
          datum.add(gasBrand);
          //Optionally - Fourth -set a border around the panel, including
          // a title.
          datum.setBorder(BorderFactory.createTitledBorder("Per Purchase Information"));
          //Fifth - Add listeners to each text field to be able to
          // know when data is input into them.
          currentMileage.addActionListener(this);
          numofGallonsBought.addActionListener(this);
          dateofPurchase.addActionListener(this);
          pricePerGallon.addActionListener(this);
          gasBrand.addActionListener(this);
     }// Closes buildDatumPanel
     // This method builds a panel called gasTypePanel that holds the checkboxes.
     public void buildGasTypePanel()
     { // Opens buildGasTypePanel method
          // First, create the panel.
          gasgrade = new JPanel();
          // Second, set its background color and its layout.
          gasgrade.setBackground(Color.white);
          gasgrade.setLayout(new GridLayout(5, 1, 10, 20));
          // Third, add all the checkboxes to the panel.
          gasgrade.add(chbxReg);
          gasgrade.add(chbxSuper);
          gasgrade.add(chbxUltra);
          gasgrade.add(chbxOther);
          gasgrade.add(chbxHigher);
          gasgrade.add(chbxLower);
          //Optionally, - Fourth - set a border around the panel, including
          // a title.
          gasgrade.setBorder(BorderFactory.createTitledBorder("Gas Type Information"));
          // Fifth - CheckBoxes require a CheckBox Handler.
          // This is a method created separately
          // outside of the method where the checkboxes are added to
          // the panel or where the checkboxes are even created.
          // This method (CheckBox Handler) implements and ItemListener
          // and is a self-contained method all on its own. See
          // the CheckBox Handler methods following the
          // actionPerformed method which follows.-SLM
     } // Closes the buildGasTypePanel method
// Create the functionality to capture and react to an event
//   for the checkboxes when they are checked by the user and
//   the text fields to know when text is entered. Also to react to the
//   Enter button being pushed and the edit button being pushed.
public void actionPerformed(ActionEvent evt)
{ // Opens actionPerformed method.
     if((evt.getSource() == currentMileage) || (evt.getSource() == enter))
          { // Opens if statement.
            // Retrieves the text from the currentMileage text field
            // and assigns it to the variable currentMileageText of
            // type String.
            String currentMileageText = currentMileage.getText();
            lblcurrentMileage.setText("Current Mileage is:    " + currentMileageText);
            // After printing text to JLabel, hide the text field.
            currentMileage.setVisible(false);
       } // Ends if statement.
      if((evt.getSource() == numofGallonsBought) || (evt.getSource() == enter))
          { // Opens if statement.
            // Retrieves the text from the numofGallonsBought text field
            // and assigns it to the variable numofGallonsBoughtText of
            // type String.
            String numofGallonsBoughtText = numofGallonsBought.getText();
            lblnumofGallonsBought.setText("The number of gallons of gas bought is:    " + numofGallonsBoughtText);
            // After printing text to JLabel, hide the text field.
            numofGallonsBought.setVisible(false);
       } // Ends if statement.
       if((evt.getSource() == dateofPurchase) || (evt.getSource() == enter))
                 { // Opens if statement.
                   // Retrieves the text from the dateofPurchase text field
                   // and assigns it to the variable dateofPurchaseText of
                   // type String.
                   String dateofPurchaseText = dateofPurchase.getText();
                   lbldateofPurchase.setText("The date of this purchase is:    " + dateofPurchaseText);
                   // After printing text to JLabel, hide the text field.
                   dateofPurchase.setVisible(false);
       } // Ends if statement.
       if((evt.getSource() == pricePerGallon) || (evt.getSource() == enter))
                        { // Opens if statement.
                          // Retrieves the text from the pricePerGallon text field
                          // and assigns it to the variable pricePerGallonText of
                          // type String.
                          String pricePerGallonText = pricePerGallon.getText();
                          lblpricePerGallon.setText("The price per gallon of gas for this purchase is:    " + pricePerGallonText);
                          // After printing text to JLabel, hide the text field.
                          pricePerGallon.setVisible(false);
       } // Ends if statement.
       if((evt.getSource() == gasBrand) || (evt.getSource() == enter))
                   { // Opens if statement.
                     // Retrieves the text from the gasBrand text field
                     // and assigns it to the variable gasBrandText of
                     // type String.
                     String gasBrandText = gasBrand.getText();
                     lblgasBrand.setText("The Brand of gas for this purchase is:    " + gasBrandText);
                     // After printing text to JLabel, hide the text field.
                     gasBrand.setVisible(false);
       } // Ends if statement.
       // This provides control statements for the Edit button. If the
       // Edit button is clicked, then the text fields are visible again.
       if(evt.getSource() == edit)
       { // Opens if statement.
         // If the edit button is pressed, the following are set to
         // visible.
            currentMileage.setVisible(true);
            numofGallonsBought.setVisible(true);
            dateofPurchase.setVisible(true);
            pricePerGallon.setVisible(true);
            gasBrand.setVisible(true);
     }// Closes if statement.
} // Closes actionPerformed method.
     private class CheckBoxHandler implements ItemListener
     { // Opens inner class
          public void itemStateChanged (ItemEvent e)
          {// Opens the itemStateChanged method.
               JCheckBox source = (JCheckBox) e.getSource();
                    if(e.getStateChange() == ItemEvent.SELECTED)
                         source.setForeground(Color.blue);
                    else
                         source.setForeground(Color.black);
                    }// Closes the itemStateChanged method
               }// Closes the CheckBoxHandler class.
} //Ends the public class collectTextInput classThe error I keep receiving is as follows:
C:\jdk131\CollectTextInput.java:128: missing method body, or declare abstract
     public void buildImagePanel();
^
C:\jdk131\CollectTextInput.java:142: missing method body, or declare abstract
     public void buildDatumPanel();
^
2 errors
I have looked this error up in three different places but the solutions do not apply to what I am trying to accomplish.
Any help would be greatly appreciated!! Thanks!
Susan

C:\jdk131\CollectTextInput.java:128: missing methodbody, or declare ?abstract
public void buildImagePanel();^
C:\jdk131\CollectTextInput.java:142: missing methodbody, or declare abstract
public void buildDatumPanel();Just remove the semicolons.
Geesh! If I had a hammer I would be hitting myself over the head with it right now!!! What an obviously DUMB newbie mistake!!!
Thanks so much for not making me feel stupid! :-)
Susan

Java.lang.RuntimeException: Uncompilable source code - missing method body

Hi,
I am getting the following error at runtime
java.lang.RuntimeException: Uncompilable source code - missing method body, or declare abstractwhen I try to instantiate a class using reflexion as following:
MyInstance = MyClass.newInstance(); I have tried to find some explanation using Google, but could not find any that fit my case. MyClass's implementation has a public constructor with no parameter. There is no error at compile time when cleaning and building all code.
Anyone has tips about what could cause this error?
Thanks.

Jrm wrote:
It is not my code originally... You are making far too many unchecked assumptions about the reality of this situation to even get close to what that reality it is... Get over patronizing, it would improve your social/people skills... Thanks !It is your own problem that you perceive something as patronizing, while in fact it was only an honest and straight to the point attempt to help you. This forum does not deal in sensitivity, it gets in the way of helping people to see the error of their ways.

Exception "main" javax.xml.ws.soap.SOAPFaultException: Missing SOAP Header

Hi
I need to integrate E-Business Suite with ADF using JAX-WS proxy client. When I tried to invoke a method exposed in webservices, I am getting the below error
Exception in thread "main" javax.xml.ws.soap.SOAPFaultException: Missing in SOAP Header
how to pass password with SOAP header?
In a thread "https://forums.oracle.com/forums/thread.jspa?threadID=2125723", they mentioned to include "wss_username_token_client_policy" and to set override property to set user/pw from a csf key. I included that policy while generating the proxy client in "Step 7" and after then what should I do?
Is it the only way to invoke secured webservices? if not what are the ways to do it?
Can anyone give me good example or sample codes to invoke secured webservice through "JAX-WS Proxy client"
Thanks

I suppose that this is duplicate of How to pass username/password through WebService proxy client to E-BS.
For full example check: http://www.javadb.com/using-a-message-handler-to-alter-the-soap-header-in-a-web-service-client
Dario

XMLServer problem with Strings. SOAP implementation

hi,
I've tried to export a Service Objet with XMLServer.
The SO consists of a method that will be called by a JAVA client :
execute (String param) : String
There is no problem when this method returns a String with no special caracters. But when it contains some 'e', for example, the Java client is no more able to get the response.
The error deals with the SOAP envelop of the response,
the Java client crashes :
SOAP Fault; code=SOAP-ENV:Server string=XMLSvr.ProtocolSOAP.getResponseText: Internal Error - no response envelope
I use UDS 5.0 on NT
The Java client uses Apache.SOAP packages
Is this a problem of compatibility between the two SOAP implementations ??
Please help me ...
matt

Hi Matt,
UDS 5.0.1 is able to generate a SOAP Server and Java Proxies (Java clients) but there are some limitations in the current implementation (Does not have support for array of string for example...). I would suggest you to check http://knowledgebase.iplanet.com/ikb/kb/articles/7655.html for further info abou those limitations (by the way, all the questions and answers except one, are from an email I sent to the Iplanet guys last year... :-)

Implements interface method at the derived class

Hi all.
I have a class (Derived) that extends another class (Base).
In the base class (Base) there is a method f() with its implementation.
In the interface (C) there is also f() method exactlly like in the base class (Base).
The derived class (Derived) is implements the interface (C).
My question is:
Do i have to implement the method f() in the derived class (Derived) ?

My guess is that you probably have to, even if it's just to call the parent's method.
This all sounds pretty sketchy. Why don't you just make the BASE class implement your interface?

Error message "missing method body, or declare abstract"

This is my test driver. Does anyone know why it is not working?
public class TestInfo
   public static void main(String args[])
          Info results = new Info();
          printInfo();
     public static String printInfo();
          System.out.println(" The Diameter is: " + results.diam
          + " The Circumference is: " + results.circum
          + " The Area is: " + results.area);
}The error message I get is: missing method body, or declare abstract
The print block has to be a separate method. The print block works when I put it in main. When it is in a separate method and I call it in main it doesn't work

You have an extraneous semi-colon after printInfo. This tells the compiler that that's all there is for that method, which only makes sense if it's an abstract method. It sees the block after the semicolon, but it thinks it's an initializer. So it wants you to either declare it abstract, or give it a method body.
Just remove that semicolon and you're fine.

Getting missing method error - first attempt at arrays

I'm trying to work with arrays for the first time ever - I understand the concept, but can't quite get the syntax down. Here is the class which won't compile and is giving me a missing method body or declare abstract message - please help me understand what I'm doing wrong.
import java.util.Scanner;
import static java.lang.System.out;
public class Inventory
//declare and initialize variables
   private int itemNumber = 0;
   private String productName;
   private int stockAmount = 0;
   private double productCost = 0;
   private double totalValue = 0;
   private double totalInventory = 0;
   //initialize scanner
   Scanner input = new Scanner(System.in);
   public Inventory (int itemNumber, String productName, int stockAmount,
           double productCost, double totalValue);
   out.println("Please enter item number: "); //prompt for item number
      itemNumber = input.nextInt();
   out.println( "Enter product name/description: "); //prompt for product name
      productName = input.next();
   out.println("Quantity in stock: ");
      stockAmount = input.nextInt(); // prompt for stock quantity
   out.println("What is the product cost for each unit? ");
      productCost = input.nextDouble(); // prompt for product cost
        totalValue = stockAmount * productCost; //calculate stock value
      } // end calculate stock value
      { //request for inventory details
        out.printf("%s, which is item number %d, has %d pieces currently in " +
            "stock at a price of %.2f each. The total value of " +
            "inventory in stock is %.2f\n.", productName, itemNumber, +
            stockAmount, productCost, totalValue);
      } // end request
}// end classHere is my main method - I don't think I'm referencing things the way I'm supposed to.
public class Main {
public static void main(String[] args) { //start main method
        Inventory inventory = new Inventory(); //call Inventory class
        inventory.inventoryInput();
}

LOL - you are right, I don't really know what I'm doing. I don't understand this and am just trying to muddle my way through this whole thing...as you can tell I'm facing many challenges.
Here is how I've changed my main method and the Inventory class - still getting error messages though - any additional hints/suggestions?
Inventory class
import java.util.Scanner;
import static java.lang.System.out;
public class Inventory
//declare and initialize variables
   private int itemNumber = 0;
   private String productName;
   private int stockAmount = 0;
   private double productCost = 0;
   private double totalValue = 0;
   private double totalInventory = 0;
   //initialize scanner
   Scanner input = new Scanner(System.in);
   public Inventory (int itemNumber, String productName, int stockAmount,
           double productCost, double totalValue)
   out.println("Please enter item number: "); //prompt for item number
      itemNumber = input.nextInt();
   out.println( "Enter product name/description: "); //prompt for product name
      productName = input.next();
   out.println("Quantity in stock: ");
      stockAmount = input.nextInt(); // prompt for stock quantity
   out.println("What is the product cost for each unit? ");
      productCost = input.nextDouble(); // prompt for product cost
        totalValue = stockAmount * productCost; //calculate stock value
      } // end calculate stock value
      { //request for inventory details
        out.printf("%s, which is item number %d, has %d pieces currently in " +
            "stock at a price of %.2f each. The total value of " +
            "inventory in stock is %.2f\n.", productName, itemNumber, +
            stockAmount, productCost, totalValue);
      } // end request
}// end classMain method
public class TestInventory
    public static void main(String[] args)
    {Inventory[] inventoryArray = new Inventory[3];
     inventoryArray[0] = new Inventory(0, 2541, Radios, 14, 15.95);
     inventoryArray[1] = new Inventory(1, 1685, VCR, 10, 98.95);
     inventoryArray[2] = new Inventory(2, 5872, Clock, 8, 12.95);
     For (Inventory inventory : inventoryArray)
         System.out.println(Inventory);
}

Missing method body

class Board
    public static void main(String[] args)
        Board example = new Board();
    private Board();
        char array[][];
        array = new char[3][3];
        for (int i = 0; i < 3; i++)
            for (int j = 0; j < 3; j++)
                array[i][j] = '.';
                System.out.println(array[i][j]);
}compiler says missing method body, but i can't think where the error is? private Board has to be a constructor.

Are you using a text editor or an IDE? If you are already fairly familiar with the Java programming language and the java/javac and you understand how classpath works, then you might consider to step over from the text editor to an IDE, such as Eclipse. It will save time and effort in developing. I tried to reproduce your problem in Eclipse and it clearly understrikes the "Board();" part during typing and says "This method requires a body instead of a semicolon" which makes much more sense.

Missing method body and cannot resolve symbol

I keep getting these two errors when trying to compile. I know that I need to call my fibonacci and factorial functions from the main function. Is this why I am getting the missing method body error? How do I correct this?
Am I getting the cannot resolve symbol because I have to set the num and fact to equal something?
Thanks
public class Firstassignment
public static void main(String[]args)
     System.out.println();
public static void fibonacci(String[]args);
     int even=1;
     int odd=1;
     while (odd<=100);
     System.out.println(even);
     int temp = even;
     even = odd;
     odd = odd + temp;
public static void factorial (String[]args);
     for (int count=1;
     count<=num;
     count++);
     fact = fact * count;
     outputbox.printLine("Factorial of" + num + "is" + fact);

Hey... :o)
the problem is that you've put semicolons at the end of the function signature, like this:
public static void fibonacci(String[]args);
}that should happen only when the function is abstract... so ur function should actually look like this:
public static void fibonacci(String[]args)
}also, i think you've missed out on the declarations (like what are fact and num??)....

Missing method body or declare abstract...

Hi There,
Im working on an assignment that works with the math class and performs a bunch of mathematical functions. Im trying to declare the different fields in the math class and I keep getting error messages!!
This is what I have right now
public class Math
    // Returns the absolute value of a double value.
    double abs(double a);
    // Returns the absolute value of a int value.
    int abs(int a);
    //Returns the greater of two double values.
    double max(double a, double b);
    //Returns the greater of two int values.
    int max(int a, int b);
    // Returns the lesser of two double values.
    double min(double a, double b);
    // Returns the lesser of two double values.
    int min( int a, int b);
    // Returns the value of the first argument raised to the power of
    // the second argument.
    double pow(double a, double b);
    // Returns the remainder of division of two integers.
    int remainder(int a, int b);
    // Returns the closest long to the argument.
    long round(double a);
    // Returns the sum of all the elements in an array of doubles.
    double sum(double [] doubleArr);
    // Returns the sum of all the elements in an array of ints.
    int sum(int [] intArr);
    // Storage for the list of integers used for the int sum method.
    private int [] intArray = {5, 10, 15, 20};
    // Storage for the list of doubles to be used double sum method.
    private double [] doubleArray = {5.25, 10.00, 14.50, 21.90};
    }When I try and compile it tells me that Im missing method body or declare abstract.
I originally had this
   // Returns the absolute value of a double value.
    double abs;
    // Returns the absolute value of a int value.
    int abs;
    //Returns the greater of two double values.
    double max;
    //Returns the greater of two int values.
    int max;
    // Returns the lesser of two double values.
    double min;
    // Returns the lesser of two double values.
    int min;
    // Returns the value of the first argument raised to the power of
    // the second argument.
    double pow;
    // Returns the remainder of division of two integers.
    int remainder;
    // Returns the closest long to the argument.
    long round;
    // Returns the sum of all the elements in an array of doubles.
    double sum(double [] doubleArr);
    // Returns the sum of all the elements in an array of ints.
    int sum(int [] intArr);
    // Storage for the list of integers used for the int sum method.
    private int [] intArray = {5, 10, 15, 20};
    // Storage for the list of doubles to be used double sum method.
    private double [] doubleArray = {5.25, 10.00, 14.50, 21.90};When i tried doing this it told me that I had already declared the field previously when it got the the field with the same name and thats why I added the bit in brackets.....
Im so lost... can anybody hep????

hi,
here is your code...
modified by correcting my bad habit...
he..he...
public class Math
    // Returns the absolute value of a double value.
    double abs(double a){return 0.0;}
    // Returns the absolute value of a int value.
    int abs(int a){return 0;}
    //Returns the greater of two double values.
    double max(double a, double b){return 0.0;}
    //Returns the greater of two int values.
    int max(int a, int b){return 0;}
    // Returns the lesser of two double values.
    double min(double a, double b){return 0.0;}
    // Returns the lesser of two double values.
    int min( int a, int b){return 0;}
    // Returns the value of the first argument raised to the power of
    // the second argument.
    double pow(double a, double b){return 0.0;}
    // Returns the remainder of division of two integers.
    int remainder(int a, int b){return 0;}
    // Returns the closest long to the argument.
    long round(double a){return 0.0;}
    // Returns the sum of all the elements in an array of doubles.
    double sum(double [] doubleArr){return 0.0;}
    // Returns the sum of all the elements in an array of ints.
    int sum(int [] intArr){return 0;}
    // Storage for the list of integers used for the int sum method.
    private int [] intArray = {5, 10, 15, 20};
    // Storage for the list of doubles to be used double sum method.
    private double [] doubleArray = {5.25, 10.00, 14.50, 21.90};
    }if you want to extend Math class to any other class.. then make all the methods abstract
dhaval.
Edited by: Dhaval.Yoganandi on 1 Mar, 2008 3:48 PM

Evaluation of SOAP implementations

Hi,
I'm currently evaluating SOAP to implement a web-services-type application to front a existing system. The server is certainly Java-based, but the client can be anything. I'm a complete newbie with SOAP, so please bear with the idiotic-type questions.
1. Are there still interoperability issues with SOAP implementations between Sun/Apache and Microsoft? I've read several articles on this, but they are dated at least 1-2 years ago. Any glaring issues currently?
2. The AppServer is currently on Java1.4.0. Any known issues?
3. I've tried using the jwsdp to implement a simple (and raw) SOAP service. Anyone with a recommendation whether jwsdp will suffice or would Apache Axis be a better candidate? What does Axis provides that jwsdp doesn't if i already have a http-based MVC framework that I have to re-use?
4. A more general question: Must I deploy a WSDL for my SOAP serivces?
Many thanks in advance.

Hello,
Try to roll back the time of the computer to a few days back until you are able to perform an edition upgrade.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Implementation of method

hi Frnds,
i have got a class which is having a interface method. I want to implement that method in that class only. but when i Double Click on it then it is showing that it is implementated in a different class.
how can i implement it in that class only.
Thanks
Rohit

Hi ROHIT,
when i double click on the interface it shows me that it is implemented in the superclass
As interface is always implemented in public section of a class, it is already implemented in all its subclasses. Therefore you already have the implementation done. As my predecessors said you cannot control were it is implemented (besides your implementation), but you can redefine it. It will then have a different implementation than it has in superclass. Without this your class cannot impelemnt it once again as name conflict would arise. This is because you already have one implementation of that interface method in you public section (made in supperclass).
Hope this is clear
Marcin

SOAP Implementation missing methods

Similar Messages

Maybe you are looking for