SOAP Monitor unable to communicate with server

We're getting started with a few RisPort SOAP Service requests and we're trying to leverage the built-in SOAPMonitor at (:8443/realtimeservice/SOAPMonitor).
We can't seem to get the monitor to connect - the exact error is "The SOAP Monitor is unable to communicate with the server." Any pointers to help troubleshoot this issue? We're struggling to find any CUCM related info on this one.
Thanks!

Have you tried to restart the soap service in CUCM? We had this error with Prime Collaboration once and that was able to resolve it. Good luck.
-Ryan

Similar Messages

HT1430 I am getting a message asking me to enter my Facebook password in the Settings. However, when I enter it, I get the message "unable to communicate with server." It's driving me crazy!

I can't connect with the Facebook server. When I tried to connect with Facebook when playing Candy Crush, I got the message to "enter password for "" in Settings. When I go to Settings, it says "There was a problem accessing your account. Please reenter the password for [my name]." Then, when I type in my password, I get the message "unable to communicate with server."
I tried deleting my Facebook account and then reinstalling it, but the problem continues. Any ideas?

Dear Tomarshe
I had the same problem a couple of weeks back.
What I did was that I restarted that Ipad of mine and voila!
Problem solved!
hope this helped!
- DASHdotDASHdot

HELP, i am unable to get Facebook to run. I keep getting the following error: Error signing in, unable to communicate with server.

HELP, i am unable to get Facebook to run. I keep getting the following error: Error signing in, unable to communicate with server.

>tutorial on learning PE
Here are some links I've saved
Saving & Sharing http://forums.adobe.com/thread/1051093
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
-v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/
-All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/1451529724/
-and http://forums.adobe.com/thread/498626
-and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-premiere-elements-7-and- 8.html
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/
User Guide PDF http://help.adobe.com/en_US/premiereelements/using/index.html
Right click PDF link in the upper right corner and select to save to your hard drive
-the page also has links to help pages for previous versions

"Unable to communicate with server error" when pasting data in in list via edit

Hi Guys, I imported data into a SharePoint site and it seems that it made the fields in to multiline, so I had to edit each colum and make it single, but when I did that it seems that the html font code also detached and views in the record as you can see.
So I went into edit list so I can copy and past the same data back in without having the font color html code in, but once I did that I am getting a error which isn't letting me save
Does anyone know how to pass this error or another way to remove all these font codes in my fields names?
Thank you.

Hi,
For your issue, try to do IIS Reset, compare the results.
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also use Internet Explorer 8,9,10 to check whether it works.
Also, please check the SharePoint ULS log located at : C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS to get a detailed error description.
meanwhile check the following, may help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/8142d297-d8f7-4b7a-8faa-052ecb9ae74a/custom-item-updating-throws-unable-to-communicate-with-the-server-error?forum=sharepointgeneral
http://sharepoint.stackexchange.com/questions/94087/give-users-edit-permission-to-a-list-but-no-access-to-the-site
https://social.technet.microsoft.com/Forums/sharepoint/en-US/d7845547-e0f1-40de-badd-c66a34c0cfb4/the-server-was-unable-to-save-the-form-at-this-time-please-try-again
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Sgd applet unable to communicate with server on upgrade to 5.0

Hi
I have upgraded from sgd 4.6 to sgd 5.0 and couldn't able to open sgd due to below issue
Java Console log
Java Plug-in 10.45.2.18
Using JRE version 1.7.0_45-b18 Java HotSpot(TM) 64-Bit Server VM
User home directory = /home/sbolloju
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
Missing Application-Name: manifest attribute for: http://localhost/sgd/tcc/java/ttalwH-jps.jar
Missing Permissions manifest attribute for: http://localhost/sgd/tcc/java/ttalwH-jps.jar
Missing Codebase manifest attribute for: http://localhost/sgd/tcc/java/ttalwH-jps.jar
Missing Application-Name: manifest attribute for: http://localhost/sgd/tcc/java/ttalwH-jps.jar
Missing Permissions manifest attribute for: http://localhost/sgd/tcc/java/ttalwH-jps.jar
Missing Codebase manifest attribute for: http://localhost/sgd/tcc/java/ttalwH-jps.jar
Missing Application-Name: manifest attribute for: http://localhost/sgd/tcc/java/ttalwH-jps.jar
Missing Permissions manifest attribute for: http://localhost/sgd/tcc/java/ttalwH-jps.jar
Missing Codebase manifest attribute for: http://localhost/sgd/tcc/java/ttalwH-jps.jar
Missing Application-Name: manifest attribute for: http://localhost/sgd/tcc/java/ttalwi3liH-jps.jar
Missing Permissions manifest attribute for: http://localhost/sgd/tcc/java/ttalwi3liH-jps.jar
Missing Codebase manifest attribute for: http://localhost/sgd/tcc/java/ttalwi3liH-jps.jar
Oct 30, 2013 12:19:04 PM com.tarantella.tta.client.tcc.lwplugin.qH.i a
WARNING: Wait for port file failed
Oct 30, 2013 12:19:04 PM com.tarantella.tta.client.tcc.lwplugin.qH.i a
WARNING: An error occured. Terminating
Server logs
with default english locale
127.0.0.1 - - [30/Oct/2013:11:57:22 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/pluginH/m_en.class HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:57:22 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/pluginH/m_en.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:57:22 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/pluginH/m_en.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:57:22 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/pluginH/m_en_US.class HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:57:22 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/pluginH/m_en_US.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:57:22 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/pluginH/m_en_US.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:57:22 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/qH/m_en.class HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:57:22 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/qH/m_en.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:57:22 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/qH/m_en.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:57:22 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/qH/m_en_US.class HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:57:22 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/qH/m_en_US.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:57:22 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/qH/m_en_US.properties HTTP/1.1" 404 561
::1 - - [30/Oct/2013:11:57:50 +0530] "GET /sgd/index.jsp?langSelected=de HTTP/1.1" 302 -
with Deutsch Locale
127.0.0.1 - - [30/Oct/2013:11:59:07 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/pluginH/m_de_en.class HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:59:07 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/pluginH/m_de_en.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:59:07 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/pluginH/m_de_en.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:59:07 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/pluginH/m_de_en_US.class HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:59:07 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/pluginH/m_de_en_US.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:59:07 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/pluginH/m_de_en_US.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:59:07 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/qH/m_de_en.class HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:59:07 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/qH/m_de_en.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:59:07 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/qH/m_de_en.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:59:07 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/qH/m_de_en_US.class HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:59:07 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/qH/m_de_en_US.properties HTTP/1.1" 404 561
127.0.0.1 - - [30/Oct/2013:11:59:07 +0530] "GET /sgd/tcc/java/com/tarantella/tta/client/tcc/lwplugin/qH/m_de_en_US.properties HTTP/1.1" 404 561
The library files under /opt/tarantella/webserver/tomcat/7.0.37_axis1.4/webapps/sgd/tcc/java are not containing any files with the above names which could be the reason why SGD is not working.
Could you help me in getting the resolution for the issue
Regards,
Srinivas Bolloju
<moderator removed email address>
Message was edited by: Nicolas.Gasparotto

Make sure your deployment is using a supported network configuration, we do not support running under localhost. Your SGD server needs a valid DNS name configured.
See
2.1. SGD Server Requirements and Support
for more details

IPhone gets error Unable to Communicate with Server (503)

Shortly after i enter the passcode from my iPhone into my PC, the error message comes up on my iPhone.

We had some minor outtages yesterday. 503 is an error about not finding the server. Try again and let me know if it doesn't work.
Does the PC synchronize properly without any error?

Error: Unable to communicate with the Reports Server

The configuration I am working with is:
* Oracle 8.1.6 DB on a Unix machine
* Oracle Reports 6i on an NT machine
* Microsoft IIS web server
I have successfully tested my reports during the development phase of my project. Unfortunately, now that it is considered production and is available to upwards of 30 people, I am getting the following error message after verifying the server is up and after a numerous reports have been served:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Unable to communicate with the Reports Server.
After receiving this message I noticed that the Report Server service is down and the log only indicates that it "shut down immediately". (no ORA messages) I tried restarting the service, but after serving one report, it would shut down again with the same message.
I am wondering if it is a problem related to the cache. I used the default of 50M in the config file, but when the cache directory reaches 50M, the problem seems to appear. I then deleted approx. 30M of files from the cache directory and the Report Server service appeared stable. I changed the cache limit to 1M to see if there was a problem with the cache being so big. All appeared well for the first few hours of operation but then the Report Server service shut down again and upon restart crashed within a minute or two (usually as someone tests a report, it crashes again).
Do I have a configuration problem? Has anyone seen this problem? Thanks in advance.

Hi,
I just found out that if i give
http://localhost/cgi-bin/rwcgi60.exe?key1
where key1 is a key mapping file that contains the report name,username and pwd for the database and desformat...etc..
the report pulls out fine with the correct data..
i am stunned...
while none of the other commands like
http://.../rwcgi60.exe
or
http://..../showenv?server=repserver
or any other usual command doesnt work...
anybody faced this before??
Thanks.

Oracle reports 6i error unable to communicate with the reports server

Hi,
I have followed the steps for running oracle reports server 6i..i am using win2k3 and IIS6.0
i have checked tnsnames.ora and sqlnet.ora and everything looks good..
when i try
http://localhost/cgi-bin/rwcgi60.exe
i get a page called User Database Authentication and asks for username,password and database..instead of the help page that should be displayed..
when i enter those values nothing happens for the first time and the same page is displayed again..when i enter it again i am getting this error
url requested not found or cannot be served at this time
oracle reports cgi: unable to communicate with the reports server
any help would be grateful..
Thanks.

Hi,
I just found out that if i give
http://localhost/cgi-bin/rwcgi60.exe?key1
where key1 is a key mapping file that contains the report name,username and pwd for the database and desformat...etc..
the report pulls out fine with the correct data..
i am stunned...
while none of the other commands like
http://.../rwcgi60.exe
or
http://..../showenv?server=repserver
or any other usual command doesnt work...
anybody faced this before??
Thanks.

Outboung Campaing: Error Unable to communicate with Enterprise Server. outbound Option not available

Hi everyone,
I'm running UCCX 8.01 + CUCM 7.1+ Cisco 7942 just for learning purpose. After creating the Outbound Campaign and imported the Contact List the call is received by the agent (call is state is received as Offering) but after press the Accept, Reject or any othe action button is received the error:
Error Unable to communicate with Enterprise Server. outbound Option not available (attached to post).
What does this mean?
Regards
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

Any idea?
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

The updater has been unable to communicate with the update server for at least 1h.

Hi All,
there is a warning message on one of my IronPort C300V
Version: 8.0.1-023
The error message is mention below
"The updater has been unable to communicate with the update server for at least 1h."
please suggest the issue and steps to resolve the problem or suggest that it is very critical so can i open the cisco tac call.
Thanks ,
Madhuraj

If you continue to receive this error please check that the virtual appliance is configured to use the dynamichost for updating:
myesa_2.local> updateconfig
Service (images): Update URL:
<ommitted for brevity>
[]> dynamichost
Enter new manifest hostname : port
[update-manifests.sco.cisco.com:443]>
Once 'dynamichost' is entered, the current dynamic host in use will be displayed in the prompt [ ]>, as seen above.
You will need to verify that the appliance - escpecially if a virtual (VESA) - is using the correct host.
Steve
Cisco Content Security - Email Security

CLI104 Unable to communicate with the administration server:

i am doing a glass fish clustering with load balancer plugins using SJWS7.0 as the loadbalancer.
i installed glassfish v2.1 and set up a cluster with a single node and single instance
and i did all the steps as per this document
https://glassfish.dev.java.net/javaee5/build/GlassFish_LB_Cluster.html
i did all the steps with out any errors.
but when i am trying to run the commad <websrvr_install_dir>/bin/wadm deploy-config --user=<websrvr_admin_user> <websrvr_instance_config>
i am getting following errors
CLI104 Unable to communicate with the administration server: Unable to connect t
o admin-server. Please check if the server is up and running and that the host
and port provided are correct.
i don't how to fix this error , i search a whole day for fixing this errors.now i am waiting for help .please help me to fix this one
Thanks and Regards

The glassfish document that you mentioned does not provide any instructions to start the web server's administration server.
Could you verify that the web server's administration server is indeed running? Do the following to start web server's administration server:
$ <websrvr_instance_dir>/admin-server/bin/startservAfter that step try out the deploy-config command as described in the document.
HTH.

Custom Item updating throws Unable to Communicate with the server Error.

Hi Team,
I am trying to Implement Form based authentication in SharePoint 2013. When trying to update membership list (A Custom List) item it throws "Unable to Communicate with the Server" error. As shown in below image.
Please let me know how to resolve this issue.
Thanks in advance.

Hi Murali,
I'm having a similiar problem with one of my customers. We haven't been able to resolve it but we have found a way around it, I'd like to do more testing but my customer justs wants to get on with it now that we have a workaround. Logging a call with Microsoft
can be expensive, most businesses have a finite amount of support hours so you really have to do your homework before you starting chewing those hours up.
Problem Description:
Customer created a custom list with two calculated columns and various choice, string and multi-string columns. Customer was attempting to copy and paste 128 rows of data into each column from a spreadsheet. The first (title) column successfully pasted
128 values.
Subsequent columns would paste the values but not allow the values to be committed as every row displayed the "Unable to Communicate with the Server" message, preventing the list from being saved.
Workaround:
The problem appears to be related to the number of items the customer is trying to paste during each operation and the relationship this has with the calculated columns. We found that when we pasted 70 or less items in one operation we did not receive the
error. I attempted pasting 128 rows of data into a seperate list with the same columns excluding the calculated columns, and was successfully able to paste all 128 rows.
For the problem list I suggested to the customer to copy the formula's from the calculated columns, delete these columns and then trying pasting again, he didn't like the idea as he's happy to paste in 50% chunks. Based on the fact I was able to paste
without any problems on a list without calculated columns I would suggest it's related.
So my questions for you are:
Are you trying to paste/add multiple values at once?
Do you have any special column types, i.e. calculated or lookup columns?
What columns do you have in your list?
Have you tried adding the entries in using form entry instead of grid entry?
Unforunately I don't know how generic this error message is, there is absolutely nothing in my ULS logs or event viewer. If this error is specific to submitting data to a list in grid view it would make it easier to diagnose, but if the error is generic
in nature your problem could be as obscure as the FBA configuration.
I hope this information helps you, I will try and do some more testing.

DCOM was unable to communicate with the computer xyz using any of the configured protocols; requested by PID 7b28 (C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeHMWorker.exe).

Hi,
Previously I've two exchange server 2013 named : ABC and XYZ. After is decomm XYZ, i got this error :
DCOM was unable to communicate with the computer XYZ using any of the configured protocols; requested by PID 7b28 (C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeHMWorker.exe).
EventID:10028
Source:DistributedCOM
May I know the reason why the server keep looking for the non-exist server and how to terminate this process?
Thanks in advance.

Hello,
It seems that error message occurs on the same machine with the previous Exchange Server you have decommissioned. Have you reinstall the Windows System after uninstall the Exchange
Server?
You need to check the registry keys but this is not efficient solution. The most efficient way is to reinstall the Windows if it is convenient.
Thanks,
Simon Wu
TechNet Community Support

The "welcome to Thunderbird" pop-up keeps on saying "sorry were unable to communicate with our sign-up server", how do you get past the step and create a new em

I tried to turn off the firewalls to no avail and have, on multiple occasions tried to complete the setup for a Thunderbird email account and continue to get the same message, the pop up flashes in red "sorry we are unable to communicate with our sign-up server"
any ideas how you result this issue?

If it works, the sign up page will connect you to a 3rd party email account provider such as hover or gandi who will require payment. Is this really what you want to do, given that your ISP and other providers (gmail, gmx, hotmail, yahoo) will be happy to give you an account for free?
To connect an existing email address to Thunderbird, use the route '''File|New|Existing Email Account'''.

Unable to communicate with "ImporterProcessServer"

Hi there,
I searched the forum, but only found one entry, which didn't help.
I re-installed Premiere CS4 due to a OS crash. Before that, everything worked smoothly, but now I get an error message saying: unable to communicate with the ImporterProcessServer, and Premiere won't start. The ImporterProcessServer is running in the task manager. Any ideas?
Thanks in advance!
Premiere Pro
CS4
English
no updates
no project
Operating System
Windows XP 64
SP2
English
2560 x 1024 (Dual Monitor Setup, switching to one monitor also didn't help)
Core 2 Quad Q9300 @ 2,50 GHz
4 Gb
Video card
NVidia
Geforce 260 GTX
185.85
2 Monitors
Audio card
Realtek
OnBoard Audio
5.10.0.5793
Each hard drive's capacity and space remaining 1Tb, 2 Partitions C: 234 Gb, D: 697 Gb
Hardware capture device No hardware capture device
Capture software I use Premiere for capturing
No Plug-Ins installed
Adobe Premiere was unable to comminucate with the process "ImporterProcessServer". Restarting your computer may fix this problem.
I just want to start Premiere CS4.
Starting Premire CS4 was no problem before the new installation of the OS
I already tried disabling the 2 Monitor Setup.

Welcome to the forums.
1.c is not good. Start Adobe Bridge, click on the Help menu and select Updates. When the update manager starts, close Bridge. Select all available updates in the update manager and let it do its thing. Restart your computer and you should be good to go.
Cheers
Eddie

SOAP Monitor unable to communicate with server

Similar Messages

Maybe you are looking for