SOAP over JMS Sender Communication Channel - How to?

Hello folks,
I have an async. scenario in which a SOAP message is posted to a JMS queue, then SAP PI picks up the SOAP message, extracts the payload and maps it into an IDOC to SAP.
Couple of questions...
1. Does the JMS adapter supports SOAP over JMS?
2. Can I get the entire SOAP envelope in SAP PI (just like the "do no use SOAP envelope" function works in the SOAP adapter) ?
3. Is the above scenario possible? Given the fact that my scenario (i.e. ccBPM, mappings, etc..) is expecting a SOAP envelope as input?
Thanks,
Rob

Ok, then I think I am on the right track, but still I cannot get this scenario to work.
JMS (SOAP)-> SAP PI(ccBPM) --> IDOC
I put SOAP messages on the sender queue, those messages dissapear from that queue, so I would expect that I can see them back in PI, but no trace is left behind in the monitoring area... It is like they've never been read from the input queue.
What is happenning with those messages? The definition of the SOAP envelope has been uploaded as an external definition and linked to a message interface in the repository.
JMS Communication channel checked but it is also fine.
Any clues where to look?
Thanks.

Similar Messages

JMS (Sender Communication Channel) and MQ in Mainframe (Legacy) System

Hi All,
Can we use JMS Sender Communication Channel in XI that runs on Windows 2003 server to DIRECTLY poll messages from MQ in Mainframe (Legacy) system??
I understand that we can install MQ on XI server and have mainframe push the messages to XI MQ so that JMS can poll but wanted to see if there is a way to do this without having MQ on XI server.
If you know of any documentation regarding this, can you please post it?
Thanks,
Jay

Jung,
Are you looking for this help:
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
Also check this sap help:
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
---Satish

JMS Sender Communication Channel problem

Hi XI gurus!!
I have a JMS Sender Communication Channel that cannot get information from JMS TIBCO queue.
In defaultTrace.XX.trc I see the following information and errors:
#1.#00144F249F1500C70000087D00002D8300044A22A193A198#1207412506993#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildConnection()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
#1.#00144F249F1500C70000087E00002D8300044A22A193A201#1207412506993#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildSessions()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
#1.#00144F249F1500C70000087F00002D8300044A22A193A552#1207412506993#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Error##Plain###2008-04-05 17:21:46 [161906789 SAPEngine_Application_Thread[impl:3]_52] [TIBCO EMS]: createQueueSession qsess=198151 qconn=45502 tran=true ackmode=1#
#1.#00144F249F1500C70000088000002D8300044A22A193A670#1207412506994#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildSessions()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Info##Java###Sucessfully created session {0} for profile {1}#2#com.tibco.tibjms.TibjmsQueueSession@3a5f233#
{GenericConnectionProfileImpl
{Description=ConnectionProfile of channel: JMS_Sender_loginCheckReq_001on node: 21291150 having object id: 7e7ee107bc2031d2bc79fa2fce15bbed,
JmsMessageSelector=,
ConnectionFactoryConstructor=null,
ConnectionFactoryFactoryInvocation=null,
ConnectionFactoryInvocations=[],
DestinationConstructor=
{ConstructorInvocation
{className=null,
invokeParams=[]
DestinationInvocations=[],
MessageInvocations=[],
DestinationName=null,
User=,
Password=,
isJmsSessionTransacted=true,
InitialContextEnvironment={java.naming.provider.url=190.10.0.133:9222, java.naming.factory.initial=com.tibco.tibjms.naming.TibjmsInitialContextFactory},
LookupConnectionFactory=QueueConnectionFactory,
LookupDestination=GALP.PRD.TIGERC.LOGIN.REQ,
SerializedConnectionFactoryPath=null,
SerializedDestinationPath=null,
Flags=0000000000000000000000000000000000000000000000000000100000000010
#1.#00144F249F1500C70000088100002D8300044A22A193A7EE#1207412506994#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildSessions()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
#1.#00144F249F1500C70000088200002D8300044A22A193A85F#1207412506994#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createDestination()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
#1.#00144F249F1500C70000088300002D8300044A22A193B153#1207412506997#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Error##Plain###2008-04-05 17:21:46 [161906789 SAPEngine_Application_Thread[impl:3]_52] [TIBCO EMS]: createQueueConnection qconn=45503 qconfac=QueueConnectionFactory[url=tcp://190.10.0.133:9222;clientID=null;Properties={}] user=null#
#1.#00144F249F1500C70000088400002D8300044A22A193E3CF#1207412507009#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createDestination()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
#1.#00144F249F1500C70000088500002D8300044A22A193E571#1207412507010#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.executeDestinationInvocations#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
#1.#00144F249F1500C70000088600002D8300044A22A193E64B#1207412507010#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.executeDestinationInvocations#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
#1.#00144F249F1500C70000088700002D8300044A22A193E714#1207412507010#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildMessageProducers()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
#1.#00144F249F1508770000000000002D8300044A22A83A6308#1207412618584#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#Thread[TIBCO EMS TCPLink Reader (45502),5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###2008-04-05 17:23:38 [2092826462 TIBCO EMS TCPLink Reader (45502)] [TIBCO EMS]: received msg from daemon conn=45502 seqid=40664365 msgid=ID:EMS-SERVER.91446ECB042B480:12545#
#1.#00144F249F1508770000000100002D8300044A22A83A650C#1207412618585#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#Thread[TIBCO EMS TCPLink Reader (45502),5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###2008-04-05 17:23:38 [2092826462 TIBCO EMS TCPLink Reader (45502)] [TIBCO EMS]: post msg to session sess=198151 cons=261547 seqid=40664365 msgid=ID:EMS-SERVER.91446ECB042B480:12545#
In the last two lines we can see that SAP XI do a connection to TIBCO and is getting an unknown error, even in debug (note 856346) I cannot get any information.
Actually we are running SAP XI 3.0 SP21, but this was working fine in SAP XI 3.0 SP17. We have more than 100 Communication Channels working fine and only is having this strange behavior.
BTW if we put manually information in TIBCO QUEUE it works fine, but automatically doesn't pick the message.
Thanks

HI,
As per the trace details given please consider few of the below options....
What do u see in adapter monitoring tool for JMS adapter?
http://hostname:5XX00/mdt/amtServlet
Did you follow the document on correlation of JMS messages?
In communication channel You have to set
Correlation ID -> XI conversationID
XI message ID->GUID
XI Conversation ID -> JMS correlation ID.
Now in the custom J2EE application you should set
jmscorrelationid of message before sending in to queue to jms correlation id of message before receiving from the queue.
This thread deals with the issue..
JMS Queue monitoring
Check if the JMS Sender adapter EOIO is with serialized messages
Thanks
Swarup

JMS sender communication channel content conversion

Hi,
I struck with the content conversion in the JMS Sender communication channel.
I have configured the communication channel with the filed fixed lengths. (Simple type)
The field fixed lengths i have given are 10,2,3,11
The contents in the file 1000000072 230 111
but, in the input xml after conversion iam getting 100000007 in the first field and 2 in the second field 23 in the third field.
I have configured the sender communication channel as in the document in SDN.
Even, i configured several communication channels. I didn't get this strange error any time.
I have gone through SDN to fix this issue, but i didn't get solution.
If anyone got rectified this kind of error, please answer your solution to me
Thanking you,
Regards,
Krishnaraju.

Hi,
Thanks for all your support. The issue got resolved.
The issue is due to the file, In the file the special characters are appearing. We are not able to see these characters in the notepad, wordpad, text editor.
But, these characters are appearing in th syn text editor. So, we removed those characters and processessed the file. Now, it is successfull.
Regards,
Krishnaraju.

Sharing JMS sender communication channels

Hi all,
We have flatfile interfaces to XI JMS where we would like to share the JMS sender communication channel.
This is normally not possible since you cannot have two sender agreements with the same comm channel.
Are there workarounds for sharing JMS comm channels (we cannot make use of content fields, we do no conversion). is there a way with variables perhaps?
Thanks for any help
Tom

Tom
There is an otption of send a file to multiple receivers.
Therefore use your receiver determination to have multiple receivers and set there some condition.Thus making conditional receivers. Or have two receiver determinations.
This might help you.
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
/people/prasadbabu.nemalikanti3/blog/2006/03/10/bpmsingle-sender-and-multiple-receivers-based-on-synchronous-exchangeswitch-part-1
/people/prasadbabu.nemalikanti3/blog/2006/02/27/collecting-and-bundling-vendor-records-from-different-multiple-interfaces-file-systempeoplesoft-and-sending-to-sap-r3-system-part-2
http://help.sap.com/saphelp_nw04/helpdata/en/7d/577941761b070de10000000a1550b0/content.htm
Pls : Reward points if helpful.
Vishal K

2 JMS Sender Communication Channels polling 1 MQ Queue

Hi Experts,
I have a situation where 2 JMS sender communication channels are polling 2 different message type data (via content conversion in JMS) from 1 MQ queue. However adapters are having problem polling the right message from the queue.
Is this something that is not possible?
I know that we can possibly use 2 MQ queues - one for JMS 1 with message type 1 and the other for JMS 2 with message type 2
OR
1 JMS with 1 common message type with 1 MQ queue.
But I want to confirm whether my current situation is suppose to work or not.
Thanks,
Jay

>
Jung Sun Ko wrote:
> Hi Experts,
>
> I have a situation where 2 JMS sender communication channels are polling 2 different message type data (via content conversion in JMS) from 1 MQ queue. However adapters are having problem polling the right message from the queue.
> Is this something that is not possible?
Maintain different queues for different message types.
The adapters else will just pick the message that comes to the queue first based on the polling time irrespective of the message type. It is not intelligent enough
>
> I know that we can possibly use 2 MQ queues - one for JMS 1 with message type 1 and the other for JMS 2 with message type 2
> OR
> 1 JMS with 1 common message type with 1 MQ queue.
>
> But I want to confirm whether my current situation is suppose to work or not.
>
> Thanks,
>
> Jay
Hope the above replies answers your question

Content conversion at JMS sender communication channel

Hi friends,
I have to convert fixed length flat structure to xml message.Therefor i have to do content conversion at the JMS sender comm channel.Can someone please explainthe procedure?
data in the queue would be like as follows.
9999000000124646q12233appej500rc11147822zord

Hi Manikandan,
The structure conversion can handle files containing rows with different structures. In
each row there is a key field to identify the structure. The rows with identical key fields of
course have identical structures.
Let us assume that we have a sample file with four rows. Each row has a two-byte key
field; the first row has a second field with ten bytes; the structure of the second and third
rows is the same and comprises two additional fields with three bytes each; the last row
has a second field with five bytes:
AA1234567890
BBABCABC
BBXYZXYZ
CC12345
The configuration for the conversion could look like this:
Module Configuration
Module Key Parameter Name Parameter Value
Plain2XML Transform.Class com.sap.aii.messaging.adapter.Conversion
Plain2XML Transform.ContentType text/xml;charset=utf-8
Plain2XML xml.conversionType StructPlain2XML
Plain2XML xml.processFieldNames fromConfiguration
Plain2XML xml.documentName MyDocument
Plain2XML xml.documentNamespace http://xi.com/test
Plain2XML xml.recordsetName MyRecordset
Plain2XML xml.recordsetStructure NameA,1,NameB,*,NameC,1
Plain2XML xml.keyFieldName MyKey
Plain2XML xml.keyFieldType CaseSensitiveString
Plain2XML xml.NameA.fieldNames MyKey,field-nameA
Plain2XML xml.NameA.fieldFixedLengths 2,10
Plain2XML xml.NameA.keyFieldValue AA
Plain2XML xml.NameB.fieldNames MyKey,field-nameB1,field-nameB2
Plain2XML xml.NameB.fieldFixedLengths 2,3,3
Plain2XML xml.NameB.keyFieldValue BB
Plain2XML xml.NameC.fieldNames MyKey,field-nameC
Plain2XML xml.NameC.fieldFixedLengths 2,5
Plain2XML xml.NameC.keyFieldValue CC
In xml.recordsetStructure, you add a name for each different structure followed by the
number of occurrences or an asterisk for unbounded occurrences. For each structure
name, you configure the structure separately in a separate namespace such as
xml.NameA.fieldNames and so on.
If your source file is a CSV file, replace each xml.XXX.fieldFixedLengths with
xml.XXX.fieldSeparator.
the result of this conversion looks like this:
<ns:MyDocument xmlns:ns="http://xi.com/test">
<MyRecordset>
<NameA>
<MyKey>AA</MyKey>
<field-nameA>1234567890</field-nameA>
</NameA>
<NameB>
<MyKey>BB</MyKey>
<field-nameB1>ABC</field-nameB1>
<field-nameB2>ABC</field-nameB2>
</NameB>
<NameB>
<MyKey>BB</MyKey>
<field-nameB1>XYZ</field-nameB1>
<field-nameB2>XYZ</field-nameB2>
</NameB>
<NameC>
<MyKey>CC</MyKey>
<field-nameC>12345</field-nameC>
</NameC>
</MyRecordset>
</ns:MyDocument>
Regards,
Vinod.

Issue with JMS sender Communication Channel

Hi All,
We are tying to connect to IBM WebSphere MQ system from SAP PI and pickup messages thru sender JMS adapter.
This is WebSphere MQ -> PI -> Proxy Async scenario. We deployed the required sda file in SDM. We could connect to MQ system message queue, and pick messages from PI development system.
But, when we are trying to do it from PI test system, we get the following error in Comm Channel monitoring:
Error while processing message 'b000f150-15cf-4484-24ec-d8ad10acb685'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Exception in method process.: BaseEJBException: Exception in method process. at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:105) ...
The patch levels (ABAP & Java) are the same for both the PI systems.
sda file is also deployed successfully for both systems. Comm Channel config is exactly the same for both the systems.
But, still we get the above error.
We did full cache refresh, CPA cache refresh, stopped/started comm channel, restarted the adapter, java stack, and whole PI system after deployment. But, still we get the same error.
Can you please tell me if i am missing something here?
Thanks,
Chandra

Hi,
>>>MessageFilterException
my exp with this error on JMS
a) delete the channel in ID
b) recreate it and active and it works ....
at least with activemq jms
Regards,
Michal Krawczyk

Sender communication channel

Hi..
We were doing File to File scenario. In that we have to give 2 physical files as input and one output.
InputFile1---Name,Place
InputFile2----Id,company
Outputfile----Name,Place.Id,company.
Can this scenario is possible without using bpm?
And in sender communication channel how to give the two input filenames in source directory?

Hi leelaratnam,
Try to follow the steps below and go through the blogs u will get a clear idea of merging technique using BPM:
1.Do the Message mapping and interface mapping with 2 source messages and 1 target msg.
2.FORK with "2" branches to receive the 2 files. Each fork will contain a RECEIVE STEP with correlation.
3.Transformation (call the N:1 interface mapping here which you had done)
Then you will have 2:1 mapping where you will cominbe the 2 files into single file and send step to send the data to the target file.
http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Regards,
Vinod.

JMS sender communicaton channel error

Hi,
The JMS sender communication channel throws the following error in Communication Channel monitoring in RWB.
<b>Channel started but Inactive</b>
<b>"Channel removed; check whether channel was deleted or moved to another Adapter Engine"</b>
But the channel is active and a copy object of the same channel works succesfully.
Has anyone faced such an issue?
Thanks,
Ambili

Hi Abhishek,
Thanks for ur reply.
1. Already tried it, but still the same status.
2. Yes, i can see the channel in sxi_cache.
3. Tried this several times, same message.
The issue is just for this channel and as I mentioned before, a copy object of the same channel works perfectly fine.
Thanks,
Ambili
Edited by: Ambili Jose on Jan 19, 2010 7:30 AM

How can One sender communication channel pick two file from two location

Hello
I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

>
Soumitra Sinha wrote:
> Hello Vijay
> I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
> i have two folder folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can pick file from two location and how one receiver channel can put in two location.please help me..
Ok now I get your requirement.
you cant achieve this - how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
easy way - involve IR mapping
else
have a adapter module to define your dynamic configuration.
Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Set the dynamic directory/file name etc for your receiver adapter.

How to get contents of Soap Over JMS web service's wsdl file

Hi,
Is there a way to get the soap over jms webservice's wsdl file in browser? if yes please provide me the details how to get it.
OR how can i get the contensts of WSDL file for soap over jms wsdl file.
thanks in advance.

I have the same question ("Assuming I can generate a wsdl file, can I recreate the SOAP request message from the WSDL file automatically (that matches the original request, which is hand build by me?)")
Have you already found an answer to this?

Sender JMS Synchronous communication channel not picking up files from JMS

Hello,
One of our Sender JMS synchronous communication channel (used Sync/Async bridge in the module section to make it Synchronous) is not picking up files from JMS system though the channel looks to be active (greeen).
When I am trying to stop the channel, it is giving error as "1 of 1 administered and selected channels have not been stopped", and after this when I start the cannel again it shows green but not picking up any files.
if anyone is haivng any solution for this, please reply back.
Thanks in advance.

Messages available in JMS system? please check queue's if message were there and it is not picking up then some thing wrong with cc.
simple solution create new communication channel with same details and try to use the same.

Using common SOAP Sender Communication Channel.

Hi,
Env: PI 7.1
Scenario: Same SOAP Sender communication channel is used in more than one scenario.
Properties "Use Encoded Headers" and "Use Query Strings" are checked.
Problem: SOAP channel is getting binded with the first interface/call. Subsequent calls from other interface proxies fails. It always shows the interface which used this channel for the first time.
My aim is to use the common channel in multiple scenarios and do not want to create separate channel for each.
This was working fine in PI 7.0.
Please help.

A workaround would be creating multiple sender agreements using the same channel. For this while creating the sender agreement, use the option "Sender uses virtual receiver". This was u may use same set of sender service and sender interface with same channel.
Regards,
Prateek

How to execute data base view in sender communication channel ?

hi experts
how execute data base view in sender communication channel.?
when i execute select * from data base . ( Its working)
When i execute select * from dbo.view (its showing error )
My Question is there any procedure or syntax execute the views in sender side . ?
Thanks and Regards
G.Praveen Kumar

The Error showing
Database-level error reported by JDBC driver while executing statement 'select * from View_abcMap'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'View_abcMap'.'. For details, contact your database server vendor

SOAP over JMS Sender Communication Channel - How to?

Similar Messages

Maybe you are looking for