SOAP ports with cluster setup and BES?

Okay, our cluster setup in NetWare (yes, still NetWare cluster) with Groupwise 7.0.3 we have unique TCP ports for the client/server (like 1677-something). Even though each clustered node has a unique IP and is running in protected memory.
That being said:
We'd like to enable SOAP for use with BES and GWArchive.
The issue/question:
Do either of these figure out the SOAP port for each PO? Or must the SOAP port be the same among all the PO's for BES to work properly?
If the SOAP port must be the same (I'm not the BES admin, so I don't know if the setup lets you specify just one port or if you can defined them per PO), can you run multiple POA on the same physical host (keep in mind, this is clustered with protected memory) and use the same TCP port # for SOAP?

kjhurni wrote:
> Okay, our cluster setup in NetWare (yes, still NetWare cluster) with
> Groupwise 7.0.3 we have unique TCP ports for the client/server (like
> 1677-something). Even though each clustered node has a unique IP and is
> running in protected memory.
>
> That being said:
>
> We'd like to enable SOAP for use with BES and GWArchive.
>
> The issue/question:
>
> Do either of these figure out the SOAP port for each PO? Or must the
> SOAP port be the same among all the PO's for BES to work properly?
>
> If the SOAP port must be the same (I'm not the BES admin, so I don't
> know if the setup lets you specify just one port or if you can defined
> them per PO), can you run multiple POA on the same physical host (keep
> in mind, this is clustered with protected memory) and use the same TCP
> port # for SOAP?
>
>
I haven't used BES, but in general there's no auto-discover method for
SOAP ports, so yes they'd probably have to be the same port.

Similar Messages

File to SOAP (Synchronous) with certificates Encryption and Descryption

Hi,
Can anybody advice me how can I develop the scenario file to SOAP (Synchronous Process) with certificates encryption and descryption.
Thanks,
Naidu.

For file to soap sync scenario without using BPM, you need to use the following adapter modules.
http://help.sap.com/saphelp_nw04/helpdata/en/45/20c210c20a0732e10000000a155369/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/45/20cc5dc2180733e10000000a155369/content.htm
For applying certificates, you need to configure SSL on java stack.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/197e6aec-0701-0010-4cbe-ad5ff6703c16
Regards,
Prateek

Can't forward ports with Cisco EPC3925 and Airport Express and Extreme!

Hello,
I have very big problem, I've been trying for whole day to forward ports for steam and I just can't I tried everything, I have Cisco EPC3925 ( Its main thing I think its router - right ? ) Then I have connected Airport Express to it with ethernet cable ( It's working as DHCP and NAT I have double nat issue in my airport program I don't know what is this ) also Airport Express is set to create a Wi-Fi network, then I have connected Airport Extreme with Wi-fi and set to exceed wi-fi network and can't change anything in it , can't open ports etc. etc. MY COMPUTER is connected to Airport Extreme ( 2nd device ) with cable ! So Im not connecting my computer to internet with wi-fi
Also I've been looking in Airport Express ( the 1st device ) and I saw that there I can open ports , but I opened them and nothing happend ... ports are still closed... Also I've set my computer ip to static , tried everything . And portforward.com site isn't helpfull . Also I tried to set Airport Express ( 1st device ) in bridge mode and nothing happend ( after I set it to bridge mode I can't open ports in airport program )
Please is there anyone that can Help me with this ????
Also I want to say that somehow I dont know how, but I managed to open ports in the past
I need to open all necessary ports because If I can't open them - I can't make a server and people can't join . I really really need help I've spent whole today's saturday to get it to work and this won't work !

Tesserax wrote:
I have Cisco EPC3925 ( Its main thing I think its router - right ? )
Yes, the Cisco EPC3925 is a combination modem and wireless router or gateway device. This is the device that you would need to configure for port forwarding/mapping.
Then I have connected Airport Express to it with ethernet cable ( It's working as DHCP and NAT I have double nat issue in my airport program I don't know what is this )
A "Double NAT" condition is when you have two or more routers in series where they all have NAT enabled. NAT is a service that is intended to allow you to share one Public IP address with multiple Private network clients. This is what allows you to have more than one computer on your local network have the ability to share an Internet access.
Since you have your AirPort Express connected to the Cisco by Ethernet AND the Express is configured to have NAT enabled is why you are getting a Double NAT warning.
Normally you would want all downstream routers to be reconfigured as bridges (NAT & DHCP disabled).
also Airport Express is set to create a Wi-Fi network, then I have connected Airport Extreme with Wi-fi and set to exceed wi-fi network and can't change anything in it , can't open ports etc. etc.
You will need to reconfigure the Express as a bridge. The fact that you have configured the Extreme to extend its wireless range is fine.
Also I've been looking in Airport Express ( the 1st device ) and I saw that there I can open ports , but I opened them and nothing happend ... ports are still closed
You do not want to open ports on the Express. Again, if you reconfigure it as a bridge you won't need to as all of its ports will be opened.
Ok I understand what u said, so I set my airport Express 1st device in bridge mode - if I do that I can surf internet without problems etc. Then when I set it to bridge mode my computer gets adress 192.168.1.X ( My computer gets 13 and I've set it to be static ) so my computer is 192.168.1.13 then -> I open ports for example 2700-27015 ( for steam ) in my router cisco website witch is 192.168.1.1 and in ip adress label I put my computer adress 192.168.1.13 after I do this I reset the router and turn it back on after all this everything should work fine and my ports should be open right?? Well..I've tried it.. after this I can surf internet without problems of course but my ports are still closed ... Im checking them on http://www.canyouseeme.org/ and it says they are closed I've tried with pultiple ports such as 80 .. and it just won't work I don't know why..
Also someone told me to use DMZ on and in ip adress put WAN ip of my airport express ( if its NOT set in bridge mode ) and open ports for my airport ( also I tried to open for my computer too ) - It doesn't work
Please friend tell me you can help me ..
Message was edited by: bolo822

Help with computer setup and PP settings for faster/better previews

I have been using Cyberlink PowerDirector software for video editing. It is very easy to use and can do quite a bit. It was also accelerated by Intel HD graphics built into my system, so I could see a lot of my work at a pretty high resolution in real time.
However, I wanted to see what PP was capable of, specifically the Warp Stabilizer.
So I downloaded PP and have been trying to use it, but it was just slow as heck to preview anything (chop stop chop stop...), with render times being insanely long (12 hours for five minutes of footage vs. about 30 minutes with PowerDirector).
Thinking it was a problem with my system and I needed to get a real graphics card, I got an EVGA GTX 670 (FTW) for $400, and popped it in. I modified the text file so PP would see it as a compatible card, opened up PP and changed the engine to the new card.
Things are faster, but I was expecting a lot more. Here's what I'm doing:
1. Shooting Canon 5D mark II (now III) clips 20-60 seconds long, 1080p.
2. Import to PP and sequence them.
3. Adding effects:
     A. Top adjustment layer for fast color correction (white balance)
     B. Next adjustment layer: 3-way color, shadow/highlight, unsharp mask, fast blur
     C. Video 1 layer has the clips with warp stabilizer applied to each, and dissolves.
My final output will be 720p. ( I shoot 1080p so the Warp Stabilizer will have more to work with, and I can crop without feeling like I'm degrading quality).
My system: i7 2600k, 16GB RAM, GTX 670 graphics, 120GB SSD "Max IOPS", 2TB 7200rpm internal, 2TB 7200rpm external (USB 2.0, backup drive).
I can currently preview at 1/4 res in realtime. I would really like to be able to get to 1/2 res (of course full would be great). One thing that worries me is that GPU-Z indicates that my GPU is only running at about 2% while previewing, while CPU usage is at around 50%. I was under the impression that the Mercury thing would use GPU/CUDA to process previews and effects that are supported (that includes Warp Stabilizer).
I've looked at Sequence Settings and fiddled with Preview File Format and size, but that doesn't seem to do anything. I'm currently looking around at codecs (Cineform, DNxHD), but don't know if those can help.
What settings should I alter to get better previews?

Well I'm still pretty clueless about this, but for anyone who is looking at this and wondering, here's what I've gleaned:
1. After Effects, especially CS6, makes much more and better use of graphics cards than does Premiere Pro. I'm guessing that PP will, in future versions, make better use of them. For now, no need to spend more than a couple hundred bucks on one.
2. Update the software. PP and AE both performed substantially better after installing the .01 update from adobe. After you install the update, be sure to re-do the CUDA hack, if necessary.
3. As it stands, money for a PP system is best spent on a processor, as in the newest Intel (currently Ivy Bridge), and overclocked. This is where performance happens. I'd say on a 2012 system, 16 GB RAM should be considered a minimum for video editing, and 24 or 32 if you can afford it. More than that probably won't be utilized. Hard disks can affect performance, but I don't think it's a bottleneck unless you're doing something that requires VERY fast/large reads and writes (4k source?). Most people who have high-end editing stations also have a bunch of drives in RAID, but if you look at the performance chart, the SECOND highest scoring tester did not use RAID (though did use a presumably fast and large SSD).
Keep in mind that all of this has to do with RENDER speeds. I still don't know what the bottleneck is for PREVIEWS, but I'm just going to assume it's the same.

Error with cluster setup: Java.lang.AssertionError

I am trying to setup a Weblogic 9.2 in a clustered Env in Windows 2003. My First machine comes up successfully but when I try to bring up the second server, I got the following error:
<May 30, 2011 9:31:53 PM EST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.reflect.InvocationTargetExceptionjava.lang.AssertionError: java.lang.reflect.InvocationTargetException
Any idea what went wrong? Thanks in advance.
Edited by: 862535 on May 31, 2011 2:51 AM

Hi,
I am using the startWeblogic.cmd file to start my admin server. The configurations are as follows:
<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://www.bea.com/ns/weblogic/920/domain" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xsi:schemaLocation="http://www.bea.com/ns/weblogic/90/security/xacml http://www.bea.com/ns/weblogic/90/security/xacml.xsd http://www.bea.com/ns/weblogic/90/security http://www.bea.com/ns/weblogic/90/security.xsd http://www.bea.com/ns/weblogic/920/domain http://www.bea.com/ns/weblogic/920/domain.xsd http://www.bea.com/ns/weblogic/90/security/wls http://www.bea.com/ns/weblogic/90/security/wls.xsd">
<name>AdobeClusterTest1</name>
<domain-version>9.2.2.0</domain-version>
<security-configuration>
<name>AdobeClusterTest1</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://www.bea.com/ns/weblogic/90/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://www.bea.com/ns/weblogic/90/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
</realm>
<default-realm>myrealm</default-realm>
<anonymous-admin-lookup-enabled>true</anonymous-admin-lookup-enabled>
<credential-encrypted>{3DES}X6flYzaSKVldhjc89aglUdABSB3zzVZsY9YI67ccMHrgZMaLCfNECt1V+JUIH076w2Sf7Iog+vZDHCpTplkDiHrZ/rnC6Frd</credential-encrypted>
<node-manager-username>weblogic</node-manager-username>
<node-manager-password-encrypted>{3DES}f472My412IbO+dkDSoutKA==</node-manager-password-encrypted>
<enforce-valid-basic-auth-credentials>false</enforce-valid-basic-auth-credentials>
</security-configuration>
<jta>
<abandon-timeout-seconds>600</abandon-timeout-seconds>
</jta>
<server>
<name>AdminServer</name>
<listen-address></listen-address>
</server>
<server>
<name>TestServer2</name>
<ssl>
<enabled>false</enabled>
</ssl>
<machine>AdobeMachine2</machine>
<listen-port>8002</listen-port>
<cluster>lc8_cluster</cluster>
<listen-address>20.2.4.52</listen-address>
<jta-migratable-target>
<user-preferred-server>TestServer2</user-preferred-server>
<cluster>lc8_cluster</cluster>
</jta-migratable-target>
</server>
<server>
<name>TestServer1</name>
<machine>AdobeMachine1</machine>
<listen-port>8002</listen-port>
<cluster>lc8_cluster</cluster>
<listen-address>20.2.4.51</listen-address>
<jta-migratable-target>
<user-preferred-server>TestServer1</user-preferred-server>
<cluster>lc8_cluster</cluster>
</jta-migratable-target>
</server>
<cluster>
<name>lc8_cluster</name>
<multicast-address>239.192.0.1</multicast-address>
<multicast-port>8011</multicast-port>
</cluster>
<production-mode-enabled>true</production-mode-enabled>
<embedded-ldap>
<name>AdobeClusterTest1</name>
<credential-encrypted>{3DES}E0x7cApYC85prQMGcqhWRW9x123x/hPp1BB2w1x7TI=</credential-encrypted>
</embedded-ldap>
<configuration-version>9.2.2.0</configuration-version>
<machine>
<name>AdobeMachine1</name>
<node-manager>
<listen-address>20.2.4.51</listen-address>
<debug-enabled>true</debug-enabled>
</node-manager>
</machine>
<machine>
<name>AdobeMachine2</name>
<node-manager>
<listen-address>20.2.4.52</listen-address>
<debug-enabled>true</debug-enabled>
</node-manager>
</machine>
<migratable-target>
<name>TestServer1 (migratable)</name>
<notes>This is a system generated default migratable target for a server. Do not delete manually.</notes>
<user-preferred-server>TestServer1</user-preferred-server>
<cluster>lc8_cluster</cluster>
</migratable-target>
<migratable-target>
<name>TestServer2 (migratable)</name>
<notes>This is a system generated default migratable target for a server. Do not delete manually.</notes>
<user-preferred-server>TestServer2</user-preferred-server>
<cluster>lc8_cluster</cluster>
</migratable-target>
<admin-server-name>AdminServer</admin-server-name>
</domain>
I have the same set of configurations on another machine. 1 works while the other did not. Any idea? Thanks again.

Problems with emails BIS and BES Enterprise

Hi everyone - I really hope someone can help me because i'm totally at the top of my stress levels with this phone!!!
I originally had trouble with my talkplan with my service provider and was planning to send the phone back so i removed my stuff from it and returned it to its original factory settings (as it was when I first received the phone). We agreed on a talkplan shortly after however before i sent the phone back so I went about returning the software onto the phone via blackberry desktop. I appear to have come across a problem however as I received several email messages from [email protected] etc with warnings to not delete move or respond to this message shortly after this. I am also having problems while receiving email - my emails come through but only arrive in my main inbox - I cannot get my emails to go to their own respective inbox. I have done a lot of research to find what the problem is and have found that what I may have done unintentionally is install BES instead of BIS, which I think means I have set up a business connection instead of a personal email? I've been advised to reinstall software and delete and service books with the word 'desktop' in; my problem being that none of my service books contain the word desktop and i have no idea what software I need to modify or install or where to find this?? Is there anyway I can find out for sure if i've connected to an enterprise software or if I've done something else. Im totally lost and would really appreciate any help anyone can give me! Gratitude in advance; in the words of a very famous princess, you are my only hope!! Thanks guys and girls,
Han

Issue 1 - no, BIS is associated with each account.
Issue 2 - no, you need to have an active Blackberry plan on your account even if you have the service books on the phone.

Help with our setup and output to Excel

OK, I work for the EPA Office of Research and Development (ORD) here in Cincinnati. We are working on this big project that is coming to an end. Basically, we have four different carts going. We have one ultra filtration cart (UF), one reservoir cart, one ion-exchange cart, and one RO cart. The UF, reservoir, and RO carts will all be hooked up to the computer via DASYlab.
Currently, we think that we have our DASYlab setup correctly. We want to graph everything over time and we want to export everything out to Excel so the data can be analysed later. I have been in contact with DASYlab help but this really isn't there job. I was wondering if someone could look at our DASYlab file (or give me idiot proof instuctions) into making sure that data is collected once every 2 seconds, the graphs are updated once every 2 seconds, and that the charts that will be output to Excel are updated once every 2 seconds. We are working on a P-M 1.8GHz notebook with a 100GB hard drive and 2GB of RAM so it can definately handle the flow of data.
No one in our project (or TTEB branch) has any experience with DASYlab. The last person to have this type of experience was working with Strawberry Tree back in the early 90's on a old 286 PC via DOS. It was actually the job of the contractors who built our equipment to get everything setup. However, they fell through as they didn't have any previous experience with DASYlab and they just didn't feal like reading through the 100's of pages of text. This assignment was handed over to me just last week and I think I have everything setup correctly. I just don't have to the time to fully read the manual.
I would appreciate any help. If someone can help then feal free to PM me and I can e-mail them the two necessary files.
Thanks

Well I'm still pretty clueless about this, but for anyone who is looking at this and wondering, here's what I've gleaned:
1. After Effects, especially CS6, makes much more and better use of graphics cards than does Premiere Pro. I'm guessing that PP will, in future versions, make better use of them. For now, no need to spend more than a couple hundred bucks on one.
2. Update the software. PP and AE both performed substantially better after installing the .01 update from adobe. After you install the update, be sure to re-do the CUDA hack, if necessary.
3. As it stands, money for a PP system is best spent on a processor, as in the newest Intel (currently Ivy Bridge), and overclocked. This is where performance happens. I'd say on a 2012 system, 16 GB RAM should be considered a minimum for video editing, and 24 or 32 if you can afford it. More than that probably won't be utilized. Hard disks can affect performance, but I don't think it's a bottleneck unless you're doing something that requires VERY fast/large reads and writes (4k source?). Most people who have high-end editing stations also have a bunch of drives in RAID, but if you look at the performance chart, the SECOND highest scoring tester did not use RAID (though did use a presumably fast and large SSD).
Keep in mind that all of this has to do with RENDER speeds. I still don't know what the bottleneck is for PREVIEWS, but I'm just going to assume it's the same.

Need help with cluster rs and rg status

Hello,
Many a times I found, when my resource is configured a little incorrectly, then when I enable the Resource (RG is already online)
then
resource status and status message becomes "*Starting*" " *Unknown Starting*" respectively and resource group Status becomes "*Pending Online*"
In this case it happens that Resource groups fails over from one node to other and then atttempts to restart the RG/RS but as the resource is configured incorrectly, it will never be online.
Is there any solution to stop cluster processes to stop doing this and just make everything offline immediately rather than waiting for cluster processes to give up after long long time.
If you need any other information from, please let me know.
Please help!
Thanks!!

That is a quite complex question. In a nutshell and this is only my understanding:
quiesce - stops the RG and prevents it from restarting and failover; afterwards it is still under cluster control
suspend - is more moving a RG out of cluster control, so that you can fiddle with the resources without the cluster interfering with this work. At the end you have to resume RG. The details from the man page - see the -k option, which i had forgotten in my original reply.
quiesce: This command stops a resource group from continuously
switching from one node or zone to another node or zone
if a START or STOP method fails.
Use the -k option to kill methods that are running on
behalf of resources in the affected resource groups. If
you do not specify the -k option, methods are allowed to
continue running until they exit or exceed their config-
ured timeout.
suspend:
Suspends the automatic recovery actions on and quiesces
the specified resource group....
A suspended resource group is not automatically res-
tarted or failed over until you explicitly issue the
command that resumes automatic recovery. Whether online
or offline, suspended data services remain in their
current state.
THere might be some subtleties that need to be explored.
Hartmut

How to read three parameters for exemple temperature,current and voltage from the same port with visa read and separate them in a table

Hi i want to read parameters with visa read, from three sensors related to pic16f877a, using module xbee ..but i want to make every one from those parameters (temperature, voltage and current) in a table ..it's the first time i use Labview so i don't know if ther is a solution for my problem so if any one have any idea please help me. thnx in advance.

[email protected] wrote:
Hi i want to read parameters with visa read, from three sensors related to pic16f877a, using module xbee ..but i want to make every one from those parameters (temperature, voltage and current) in a table ..it's the first time i use Labview so i don't know if ther is a solution for my problem so if any one have any idea please help me. thnx in advance.
The short answer is: "Yes, of course." But you are going to have to do the legwork and learn LabVIEW basics before we can offer meaningful help.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Cluster setup and APS sizing

Hi,
I have 2 windows servers here with BI 4.0 SP2 installed on each of them and I have clustered the two CMS. Now, in CMC, I see 18 servers each for each node - so total of 36 servers that are running and enabled. ( I am talking about APS, AJS, CMS, IFRS, OFRS, dashboard servers etc.....). My questions are:
1) Should I leave them all enabled and running at all times ? my understanding is that I should, because that is how the load balancing and failover will happen. But at a couple of forums, I have read that some people leave the servers of one node off.
2)I read in some forum that by clustering the two bobjs on two servers, basically only the CMS is being load balanced. Is that true ?? Does this mean that other servers like APS, AJS, Dashobard server, crystal server and the corresponding services within them are not really being load balanced even though both are running at the same time ?
3) My installation is default and we havent gone live yet. I havent really created or modified any of the servers like APS etc. but I am reading that in your production system, you should create multiple APS servers and distribute similiar services among them ? is this true ? Note # 1580280 and the sizing companion for BO 4.0 talks about it too.Should i really worry about this even if I am only going to have 100 users in production ?
Thanks,
Jason

1) Should I leave them all enabled and running at all times ? my understanding is that I should, because that is how the load balancing and failover will happen. But at a couple of forums, I have read that some people leave the servers of one node off.
You should stop and disable all default APS and AJS servers and then create Specific APS/AJS servers only with services that you need.
There are several KB's on APS issues in BI4 and most are resolved with splitting them up.
Non APS servers you should stop those that are not part of your reporting requirements.
2)I read in some forum that by clustering the two bobjs on two servers, basically only the CMS is being load balanced. Is that true ?? Does this mean that other servers like APS, AJS, Dashobard server, crystal server and the corresponding services within them are not really being load balanced even though both are running at the same time ?
That is not true. When 2 BI4 nodes are clustered , over time the load of each service is balanced.
3) My installation is default and we havent gone live yet. I havent really created or modified any of the servers like APS etc. but I am reading that in your production system, you should create multiple APS servers and distribute similiar services among them ? is this true ? Note # 1580280 and the sizing companion for BO 4.0 talks about it too.Should i really worry about this even if I am only going to have 100 users in production ?
Yes, the default APS are not good at all and should never be used in the production, even if you only have 5 users

Strange problem after share a port with My webserver and FMS

My webserver is running, and I want to use rtmpt(80 port) to player a video. So I did as same as:
http://help.adobe.com/en_US/flashmediaserver/configadmin/WS02f7d8d4857b167770a4686812a808b 6918-8000.html
If you want Flash Media Server and your web server to share a port, set up Flash Media Server as the proxy, put your web server on an unused port, and change the fms.ini HTTPPROXY_HOST setting to point to that port.
httpd.conf
Listen *:8080

Everything is ok except when a post a form.
When I submit a form, the website send me a “application/x-fcs” type empty file let me download file.

After I upgraded my iPhone to iOS5, I had an error with iCloud setup and all my contacts are gone. Is there a way to get it back?

My iPhone froze when it was doing the initial setup of iCloud on iOS5

I take it you didn't read the warning prior to updating the phone. It said that you need to backup before upgrading. You have two ways. 1) load apps off your old computer. 2) Download apps one at a time. Your apps are still tide to your account and you will not be charged.

Help two macs with identical setup and one does not receive phone calls using Yosemite and iOS 8.1 on iPhone 6. What is going on Apple?

Ive got an imac from 2008 and MBPr from 2013. the imac does indeed receive regular calls but the newer mac, the MBPr from 2013 does not.
what is going on apple?
MacBook Pro (Retina, 15-inch, Late 2013), iOS 8.1

i got it. I fixed it by setting Time Zone in automatically in both iphone and MBC
From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
Enable "Set Automatically".
Click the Time Zone tab and confirm the closest city is correct.
do the same in the iphone and it will work

How to retrieve a lost serial number for Photoshop Elements 13 with incomplete setup and not yet registered

Cant activate my new Photoshop software as no serial number. Used redemption card to download software. Set up Adobe account but no serial number listed and no email received to my email. What now??????

You are actually in the wrong forum
Elements Forum
But this might help
Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows

Kernel Upgrade of R/3 4.7 Enterprise in Cluster Setup

Hi Experts,
We have a cluster setup with SAP R/3 Enterpirse 4.7 with MSSQL in windows 2003 server with node A and node B. Presently the system is running on Node B.
We also have two application servers (Dialog Instance).
Now I want to upgrade kernel of R/3 system. Please let me know what is the procedure for upgrading the kernel in cluster setup.
Appreciate quick response.
Regards
Sharath

Hi All,
I have successfully upgraded the kernel patch from 640-43 to 640-201 for R/3 4.7 with cluster setup. Currently the system was in Node B.
The only problem which I faced after copying the files to run folder was that the system was not coming up. So we copied back the old kernel files and started the system and it was coming online.
Wen we anayzed the problem we came to know that after copying the latest kernel files the system was not coming up as some DLLs were missing. The Note 684106 - Microsoft runtime DLLs solved the issue. Downloaded the files R3DLLINSTZIP which was given in the note and installed the files and after that my system came up with the latest kernel files.
Hope this will be helpfull for someone in futue.
Regards
Sharath Babu

SOAP ports with cluster setup and BES?

Similar Messages

Maybe you are looking for