SOAP REC ADAPTER PROBLEM

Hi Experts,
we are receiving following message from SOAP receiver adapter. Can anyone asisst me? 
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--  Inbound Message
  -->
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
  <SAP:Category>XIAdapterFramework</SAP:Category>
  <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
  <SAP:P1 />
  <SAP:P2 />
  <SAP:P3 />
  <SAP:P4 />
  <SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: Missing faultcode; HTTP 200 OK</SAP:AdditionalText>
  <SAP:Stack />
  <SAP:Retry>M</SAP:Retry>
  </SAP:Error>
Kind Regards,
PM

Hi,
have you seen below thread,
xi adapter framework
please go through below blog,
Http* Errors in XI
regards,
ganesh.

Similar Messages

  • SOAP Axis adapter - problem with XML formatting

    Hello All,
    We are using SOAP Axis adapter on our scenario (because of NTLM authenticatiom) and faced a problem that some module in a module chain is pretty-formatting XML message (inserting newlines and spaces).
    Receiving WebService is REALLY strict on format and doesn't allow spaces and newlines between XML elements.
    Formatting is for sure done already in adapter as in sxmb_moni message is still one-liner.
    After different tests this formatting is most likely done by XI30OutboundHandler.
    Are there any parameters to prevent this formatting?
    If there are no parameters, than maybe there is a standard module to remove this XML indentation?
    Where I can found source code for XI30OutboundHandler to check how it is extracting payload from XI message?
    Thanks in advance for your answers!
    Best Regards,
    Artsiom Anichenka

    Hi, have you find a solution for this problem?
    I've tried set the parameter “disablePrettyXML”, as mentioned in SAP note 1039369 (search for “disabling pretty XML”), but apparently it didn’t work too. Have you tried that?
    I still get linefeeds and carriage return in the post requisition to the WebService.
    Regards,
    Ronaldo Schork.

  • SOAP reciever adapter problem

    Hi,
    I am getting below error in the adapter monitor for my SOAP recv adapter.
    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException
    This is using external definition. I ported my PI 7.0 content to PI 7.1. I am wondering how external definitions and interfaces will effect with the setting of software component verion " use of interface objects"
    Do I need to put as SAP netweaver 7.0 since it is PI 7.0 content.
    Can I change this setting any time. How this will effect.
    I could not see this adapter error in my 7.0 env. And not in 7.1 SP04.
    is there anything i should check here to avoid this error.
    Thanks,
    Srinivasa

    Hey,
    > I am wondering how external definitions and interfaces will effect with the setting of software component verion " use of >interface objects"
    No, If so Mapping might have failed,
    >Do I need to put as SAP netweaver 7.0 since it is PI 7.0 content.
    It is good to have latest one
    >Can I change this setting any time. How this will effect.
    Sure, You can, After  upgrade do a Regression Testing.
    Cheers
    Agasthuri

  • SOAP Receiver Adapter problem (client certificate required)

    My Scenario is similar to described in https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3721. [original link is broken] [original link is broken] [original link is broken] I have two PI servers running on one machine. I am trying to post message HTTPS with Client authentication via SOAP adapter from one PI system to SOAP adapter of other PI server. I have done the following configuration.
    PI Server AXD - (Client) - Receiver SOAP adapter
    PI Server AXQ - (Server) - Sender SOAP Adapter.
    Steps in AXD
    1. I have created a certificate of AXD in the service_ssl view of key storage.
    2. I have imported the AXQ public certificate in to AXD in the TrustedCAs of Key storage
    Steps in AXQ
    1. I have created a certificate of AXQ in the service_ssl view of key storage.
    2. I have imported the AXD public certificate in to AXQ in the TrustedCAs of Key storage.
    3. I have created a user in AXQ and assigned the certificate of AXD under usermangement in Security provider to this user.
    4. I have added the AXD certificate under Client Authentication tab with require client certificate option checked in the SSL Provider.
    5. I have assigned the user created in AXQ in the step above to the Sender Agreement.
    Now when I post message from AXD with Configure Client Authentication checked (Here I have selected the certificate of AXD and view as service_ssl) I am getting the following error.
    Exception caught by adapter framework: SOAP: response message contains an error XIServer/UNKNOWN/ADAPTER.JAVA_EXCEPTION - java.security.AccessControlException: client certificate required at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:884) at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_3
    Any pointer to solve this problem is highly appreciated.
    Thanks
    Abinash

    Hi Hemant,
    I have couple of questions. Why do we need to import certificate for SOAP WS-Security and from where I can get it?
    As far as my scenario goes I am not using message level security.
    Secondly what do you mean by TRUSTED/WebServiceSecurity? I don't see any such view inside the Key Storage.  I can see a view named just WebServiceSecuity though.
    Also I don't have a decentralized adapter installation rather I have two separate PI instances having their own central adapter engine.
    Abinash

  • SOAP Receiver Adapter problem

    Hi guys,
    I have problem with ABAP Proxy->XI->SOAP scenario. I send data from R/3 via Proxy. I see in the monitor, that message has been processed successfully, however, the SOAP adapter does not send this message to the target. I tried to run a listener on on my local machine on port 80 and sent data from SAP. Again, in monitor successful, but no action in the listener - the message did not arrive. (the adapter was set up to send data to ma local PC). The scenario is async.
    Any idea, what could be wrong?
    In the receiver SOAP adapter - hoe to set up Target URL? http://<machine>:<port> or w/o port and it is automatically sent to port 80?
    Thanx for answers!
    Olain.

    Hi guys, thanx for answers..
    All the systems are in the local network, so no proxy is there. However, in the communication channel monitoring I get error: connection timed out , can be due to invalid adress.. However, If i try to reach the WS from the SOAPui tool, this web service works...
    Any other idea?
    Olian

  • Soap Receiver Adapter problem. very urgent..

    Hi,
    When I am sending data from XI to CRM through soap receiver communication channel I am getting error:
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Authority check failed
    Pls advice urgent.
    Regards

    Hi Rick,
    At fist did  you create SOAP fault message mapping in your scenario?
    If not then plz do that.
    Some links for ur help:
    Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 *** - have a look into this to troubleshoot your SOAP
    Fault Message Types - A Demo (Part 1)
    Receiver SOAP adapter scenarios:
    RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
    RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
    Regards,
    Vinod.

  • SOAP REC Adapter....Configure User Authentication

    Hi
    I have a Receiver Soap Adapter parmater called "Configure User Authentication". If I check this option again we have two fileds which are to be filled with "User" and "passowrd". These user and password are used as authentication to access webservice. My webservice team claims XI is not sending those credentials to webservice during request. How can I check whether XI is sending the user and password information to webservice during requesst ??
    Regards
    Kumar

    Hi Kumar,
    there is an option :Check OSS Note no 856597
    Download the tcpgw.zip ...extract...open the aiitcpgw.jar file..and follow as expalined in the blog
    /people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
    you will get the xml payload and there you can check the username and password is passing into the webservice.
    Cheers,
    Sunil.

  • Problem with Dynamic Configuration in SOAP-AXIS adapter..!!!

    Hi ,
    Idoc> XI>SOAP-AXIS
    I am doing a scenario where I need to pass the URL dynamically in SOAP-AXIS adapter by taking the SNDPRN of Idoc.
    If SNDPRN = 100 , message has to go to  http://10.190.25.16:8210/file/receiver
       SNDPRN = 200 , message has to go to  http://20.180.26.16:8210/file/receiver
    It is working correctly when I tried for single receiver. When I' tried to use DynamicConfiguration, it is coming in SOAP document but it is not working and not passing to correct channel.  According to this note 1039369, I mentioned the following modules.
    AF_Adapters/axis/AFAdapterBean  --->                 afreq
    AF_Adapters/axis/HandlerBean      --->                  xireq 
    AF_Adapters/axis/HandlerBean      --->                  dc
    AF_Adapters/axis/HandlerBean       --->                 remover        
    AF_Adapters/axis/HandlerBean       --->                 trp
    AF_Adapters/axis/HandlerBean        --->                xires       
    AF_Adapters/axis/AFAdapterBean    --->               afres
    xireq ->  handler.type-> java:com.sap.aii.axis.xi.XI30OutboundHandler
    dc    ->  handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
    dc   --->   key.1 --->      write http://sap.com/xi/XI/System/SOAP TServerLocation
    dc    --->          location.1  --->         context
    dc     --->         value.1      --->        transport.url
    remover    --->  handler.type    --->   java:com.sap.aii.axis.soap.HeaderRemovalHandler
    remover     ---> namespace    --->      http://sap.com/xi/XI/Message/30
    trp         --->     handler.type   --->    java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
    trp           --->  module.pivot  --->     true
    xires     --->    handler.type   --->    java:com.sap.aii.axis.xi.XI30OutboundHandler
    and I am getting the below error in SOAP-AXIS channel
    Error Axis:    error in invocation: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
    Error MP:     Exception caught with cause java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
    Error           Exception caught by adapter framework: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
    Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
    Kindly let me know if anyone has any idea what might be wrong?
    Thanks
    Deepthi

    I have a similar problem. I also like to add some header fields to my message und that's way I'm trying to use the AXIS adapter. (Axis adapter FAQ question 30) Unfortunately I'm getting exactly the same error message:
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
    Deepthi, you wrote that you have missed one jar file. Can you remember which file it was?

  • Problem to invoke SOAP Sender Adapter

    Hi,
    i've got a problem to invoke the SOAP sender adapter. The returned exception says:
    "Some of the IS access information is not available. SLDAcess property may be set to true, but SLD is not available."
    I can access the SLD web client and I have also refreshed the SLD runtime cache. The J2EE engine had a shutdown due to an "out of memory error", could it be that some things have become upside down there?
    Regards,
    Heiko

    hi,
    restart your j2ee server and try again.
    naveen

  • Problem in testing SOAP receiver adapter using SOAP UI

    Dear Experts,
    I'm trying to test my SOAP receiver adapter as mentioned in the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/21844. [original link is broken] [original link is broken] [original link is broken] But, my request from ECC proxy keeps failing in XI communcation channel monitor.  I've configured my receiver adapter http://ip:8080/mockSoapHTTPBinding and kept the authentication as NONE.  Can any of you suggest?
    ip - is my system ip shown in ipconfig.
    mockSoapHTTPBinding - is the path.
    Thanks.

    What is the error of the messages? Are the messages leaving the SOAP adapter?
    Please try both:
    1. Go to Runtime Workbench -> Component Monitoring -> Adapter Engine -> Test message. Then, execute the message directly without the intermediate of the Proxy sender. This will allow you to check only the receiver SOAP.
    2. Please use the TCPGateway tool attached from the note below. It will be a "man-in-the-middle" between the target WS and the Receiver SOAP channel, tracking the whole HTTP/SOAP message. Check if the message is well-formed.
    [Note 856597 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=856597]
    under question "Q: How can I trace the whole message?"

  • Receiver SOAP adapter problem

    Hi,
    I am getting the following error in moni when i try to consume a webservice. Even SOAP scenarios that were working fine before also are throwing the same error.I have checked some threads regarding the same error and did as mentioned in the same, but of no use. I executed that webservice alone and it is working fine. Any help on this will be appreciated.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/PLAIN</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Regards,
    Sudheer.

    Hi Sudheer,
    Let me confirm again...From XI , you are making a SOAP call using the SOAP receiver adapter..right ?
    If that is the case and you are telling sometimes it works and sometimes it doesnot, it indicates the SOAP service you are invoking from XI due to some reason is sending back non-soap response...
    we had encountered scenarios couple of time like this because the user we were using to execute the SOAP call had expired and the SOAP service was returning and HTTP-UNauthorized message back and then in MONI it would show up as the same error as what your are getting.
    To check this, (the request/response going back and forth), in my earlier post i suggested using the TCP gateway...
    Thanks.

  • SOAP receiver adapter digest authentization

    Hallo,
    I have scenario with SOAP receiver adapter configured as follow:
    Adapter Type: SOAP
    Transport Protocol: HTTP
    Message Protocol: SOAP 1.1
    Adapter Engine: Integration Serer
    Target URL: http://localhost:8099/webservices/test_v1_1_2
    Configure User Authentication
    User: ****
    Pasword:****
    but WS need digest HTTP authentication and SOAP adapter send in header Authentication: Basic.
    Hou can I change authentication method for SOAP protocol?
    Thx

    Hallo,
    I solved this problem by using AXIS framework. I hope that this short instruction help to someone.
    1. In SOAP receiver CC you have to set up Transport Protocol to HTTP(AXIS) and Message protocol to AXIS
    2. Now you can switch Authentication to Digest (NOW adapter will still send Basic!!!  Digest Authorization is Supported only by the following handler: com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender)
    3. On Module tabs in section Module configuration change type HTTPSender to CommonHTTPSender:
         (trp  handler.type  java:com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender)
    4. Save and Activate
    Before you start to use AXIS framefork you have to deploy necessary library.
    This thread help:
    Re: How to install SOAP Axis adapter and where is it available  ??
    Be carefull, for digest authorization you have to linked Optional library "Jakarta-Commons HttpClient" too.
    Good luck.
    JK

  • SOAP receiver adapter for Axis

    Hi,
    I used SOAP receiver adapter for Axis  like below:
    Transport Prorocol : HTTP
    Message Protocol : Axis
    Url: http://<IP>:<Port>/xxx/WebService/services/Head/yyy
    Authentication : Basic
    User: <user>
    Password: <password>
    SOAP Version : 1.1
    SOAP Action: : <method>
    Encapsulation Format : MIME
    Payload Extraction : SOAP Body
    When i drive PI message it generates error below.
    What must i do to solve this problem?
    Thanks.
    Error message
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.adapter.axis.modules.AFAdapterBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.adapter.axis.modules.AFAdapterBean@20715646 for bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: javax.ejb.CreateException: java.lang.NoClassDefFoundError: org/apache/axis/types/URI$MalformedURIException

    *Url:*  http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest
    When i use Url with *?wsdl* it generates below (it'is very long. I give part of it)
    wsdl
    <?xml version="1.0" encoding="UTF-8" ?>
    - <wsdl:definitions targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:intf="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:tns1="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" xmlns:tns2="http://schemas.hp.com/AssetManager/R51/ACMetaData" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    - <!--
    WSDL created by Apache Axis version: 1.2.1
    Built on Jun 14, 2005 (09:15:57 EDT)
      -->
    - <wsdl:types>
    - <schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:AdministrationTypes="http://schemas.hp.com/AssetManager/Custom/Head/Administration/Types" xmlns:CableTypes="http://schemas.hp.com/AssetManager/Custom/Head/Cable/Types" xmlns:CatalogTypes="http://schemas.hp.com/AssetManager/Custom/Head/Catalog/Types" xmlns:ChargebackTypes="http://schemas.hp.com/AssetManager/Custom/Head/Chargeback/Types"
      <import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" />
      <import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" />
    - <annotation>
      <documentation>Auto-generated schema for AssetCenter web services for Head/SapTest Implementation</documentation>
      </annotation>
      <import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SAM/Types" schemaLocation="../../schema/Head/SAM/SAMTypes.xsd" />
      <import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" ......
    <wsdl:operation name="retrieveAllBusinessAPIListByName">
      <wsdlsoap:operation soapAction="retrieveAllBusinessAPIListByName" />
    <wsdl:input name="retrieveAllBusinessAPIListByNameRequest">
      <wsdlsoap:body use="literal" />
      </wsdl:input>
    <wsdl:output name="retrieveAllBusinessAPIListByNameResponse">
      <wsdlsoap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    <wsdl:service name="SapTestService">
    <wsdl:port binding="impl:SapTestSoapBinding" name="SapTest">
      <wsdlsoap:address location="http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>

  • SOAP Receiver Adapter / Scenario calling WebServices

    Hi Experts,
    I am trying to call a web service.  Configured a SOAP Receiver adapter. Message to Web Service goes fine but not shown with Checkered flag, but with icon with description "Log Version".
    In response message for the request Error Category - MAPPING and Error ID "Cannot Read Payload".
    Any ideas to clear this problem. I do have response mapping assigned to Message Interface.  Message Interface is Synchronous.
    Thanks in advance for any solutions.

    can you verify that you are getting a response..try re-routing that to tcpgw and check if content is in line with expected response.
    Regards
    Ravi Raman

  • Soap receiver adapter payload with certficate signature

    I have a requirement.. where XI calls external webservice using SOAP.
    I have configured SOAP receiver adapter, but the webservice wants the certificate authentication.. From XI we sent the certficate to external webservice and then in the comm channel I did activate the 'certficate' check box. It did not work.
    For test purpose now they have deactivated the certficate authentication in their end.. it works if they deactivate. It means there is no issue with request structure.. purely the issue is when I use the certficate.
    External webservice sent me the copy of the soap request which works for them.. <b>that has security signature inside the payload.</b>  ( I have atteched below).
    If anybody has done it have an idea how to do it please let me know.
    - <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    - <soapenv:Header>
    - <wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
      <wsse:BinarySecurityToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" wsu:Id="CertId-62149565">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</wsse:BinarySecurityToken>
    - <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
    - <ds:SignedInfo>
      <ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
      <ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1" />
    - <ds:Reference URI="#id-24819136">
    - <ds:Transforms>
      <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
      </ds:Transforms>
      <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />
      <ds:DigestValue>6Mzpm7P8k3f8UuxbBMP4ZTC83Yc=</ds:DigestValue>
      </ds:Reference>
      </ds:SignedInfo>
      <ds:SignatureValue>HcqMChOzlHFXTRRAf7kyTSQ5Jd53Yiu7oFLjkh5P3vayo2G4sjFv/qFKHX0E6a5xkBMTIRrW+30t7IdB4X0x35FPO1dTulz37KM1/jpLSGVxnjnWWeFZvseVjJsk5NTPiSE6GAjO7rFW/Vled2djATTmZsIgJCIfhLYVp112Uis=</ds:SignatureValue>
    - <ds:KeyInfo Id="KeyId-21369792">
    - <wsse:SecurityTokenReference xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="STRId-29015968">
      <wsse:Reference URI="#CertId-62149565" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" />
      </wsse:SecurityTokenReference>
      </ds:KeyInfo>
      </ds:Signature>
      </wsse:Security>

    go through this webinar and follow the steps...It will solve your problem..
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1b657d59-0c01-0010-4fa8-f792fa412823
    Regards,
    Ravi

Maybe you are looking for

  • How do i move information from one Ipod to another?

    I am planning to get a new Ipod touch, and I was wondering how to bring my memory from my old Ipod touch to my new one, such as purchased apps, songs, movies, and so forth.

  • Photoshop Elements 10 - Error 400

    Please help.  When I try to sign onto Photoshop Elements 10, I get a 400 error that states "Photoshop.com services are currentlly unavailable.  Please try again later or check your network connections.  Error 400.  Does anyone know what the issue cou

  • Vertical Lines!! Kernal Panics !!!! Please Help

    Hi this is my first post to the forums. I thank you all in advance for answers. I have an IMAC 24'' 3.06 GHZ 4GB RAM that is displaying some weird characteristics. The first is the lines from left to right that are vertical. The first set is 4 lines

  • Music collection in digital format no cd storage playable in car and iMac?

    I have many cassettes I'd like to transfer into the mp3 format which works on the Sony MEX-1GP Giga Panel car radio. I also want to have them play on my iMac G5 10.4.11. Will this work or am I out of luck on the compatibility front? Would I need to m

  • Difference between At new and on change statement?

    What is the difference between at new and on change statement? Please explain with an example.