SOAP receiver adapter error

Hi all.
I have create a FM ZRFC_FILENUMBER on R/3 side. Then i created webservice in the R/3 itself for this RFC. It gave me WSDL file. I have loaded this WSDL file in XI external definitions.
In the receiver adpater configuration i am using the URL as specified in the file.
e.g.: http://erpdevmil.xyz.in:8001/sap/bc/srt/rfc/sap/ZRFC_FILENUMBER?sap-client=200&wsdl=1.1
I have tried using XML spy. It works fine,communicates with R/3 and sends data back. All well. But doesn't work in actuall scenario.
Acutal scenario is : Created Proxy in R/3 side and sending data to this webservice and expects data back from webservice. Here it fails.
In audit log it shows as follows :
Success SOAP: request message entering the adapter with user J2EE_GUEST
Error SOAP: call failed: java.net.ConnectException: Connection timed out: connect
I have gone through lots of blogs and threads. As per experts, checked the URL and operation name N number of times. Now want something which can solve my problem . Please it's urgent.
Thanks in advance.
Regards,
Kavan Shah

U can trace ur SOAP call with the tool TCPGateway.
/people/stefan.grube/blog/2007/03/29/troubleshooting-soap-http-and-mail-adapter-scenarios-with-tcpgateway
In the request and response section of the TCPGateway trace, u ll view the appropriate error.
Also make sure that ur webservice is accessible in the network from XI.
Regards,
Prateek

Similar Messages

Soap Receiver Adapter Error. Pls advice urgent

Hi All,
While using Soap Receiver Adapter for synchronous communication
*My Soap Request is:*
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:SendMessage xmlns:ns1="urn:MMWebSrvService">
<strFrom>XI</strFrom>
</ns1:SendMessage>
*My Soap Response from server is:*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<tns:SendMessageResponse xmlns:tns="urn:MMWebSrvService" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<return xsi:type="xsd:int">-1</return>
<strErrorDescription xsi:type="xsd:string">String reference not set to an instance of a String. Parameter name: s</strErrorDescription>
</tns:SendMessageResponse>
How to resolve the error.
Regards

Henry,
Your xml message is not xsd compliant...see if you can generate a xml message using your wsdl with random values, compare that to your imcoming msg..and thats your issue..
Hope that helps
Regards
Ravi Raman
Reward points if helpful !

SOAP Receiver adapter error. SOAP CALL Failed

Hi ,
I am implementing scenario R/3->RFC adapter->XI->SOAP REceiver adapter->Web Service (Synchronous). I am getting the error.
SOAP: call failed
SOAP: error occured: java.net.ConnectException: Connection timed out
Message log is as below.
Any clue ?
Thanks & Regards,
Mathew
2005-10-31 18:59:58
Success
output
1130810398454
The message was successfully received by the messaging system. Profile: XI URL: http://host:Port/MessagingSystem/receive/AFW/XI
2005-10-31 18:59:58
Success
output
1130810398458
Using connection AFW. Trying to put the message into the request queue.
2005-10-31 18:59:58
Success
output
1130810398458
Message successfully put into the queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message was successfully retrieved from the request queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message status set to DLNG.
2005-10-31 18:59:58
Success
output
1130810398460
Delivering to channel: CC_CALCULATOR
2005-10-31 18:59:58
Success
output
1130810398564
SOAP: request message entering the adapter
2005-10-31 19:03:07
Success
output
1130810587497
SOAP: call failed
2005-10-31 19:03:07
Error
output
1130810587497
SOAP: error occured: java.net.ConnectException: Connection timed out
2005-10-31 19:03:07
Error
output
1130810587498
Exception caught by adapter framework: Connection timed out

Hi Mathew,
Check if the webservice is availble??? Based on the error below, it looks like the message is timing out at the Adapter Engine level waiting for the connection to make the webservice call...
Prasad

SOAP receiver adapter error using Google Search web service

Hi all,
I'm trying to connect and old 4.5b system to XI SP16 to make it receive information from external Web Services.
My scenario is made up of a sender RFC adapter and a SOAP receiver which is sending the message to the Google web service (http://api.google.com/GoogleSearch.wsdl) and then awaiting a response from it.
I'm stuck with this error: "No Deserializer found to deserialize a ':key'". The problem is that XI is sending this kind of message:
          <m:doGoogleSearch xmlns:m="urn:GoogleSearch" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
               <key>mykey</key>
               <q>testing</q>
               <start>0</start>
               <maxResults>1</maxResults>
               <filter>true</filter>
               <restrict>String</restrict>
               <safeSearch>true</safeSearch>
               <lr>String</lr>
               <ie>String</ie>
               <oe>String</oe>
          </m:doGoogleSearch>
while Google is expecting this:
          <m:doGoogleSearch xmlns:m="urn:GoogleSearch" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
               <key xsi:type="xsd:string">mykey</key>
               <q xsi:type="xsd:string">testing</q>
               <start xsi:type="xsd:int">0</start>
               <maxResults xsi:type="xsd:int">1</maxResults>
               <filter xsi:type="xsd:boolean">true</filter>
               <restrict xsi:type="xsd:string">String</restrict>
               <safeSearch xsi:type="xsd:boolean">true</safeSearch>
               <lr xsi:type="xsd:string">String</lr>
               <ie xsi:type="xsd:string">String</ie>
               <oe xsi:type="xsd:string">String</oe>
          </m:doGoogleSearch>
with explicitly declared xsi:type.
I've tested both messages with XMLSpy and the first one is always returning the same error.
Is there a way to make XI send an XML message with written xsi:type?
Many thanks in advance!
Max

Hi Ricardo!
I followed your suggestion to create a simple XSLT mapping program (in the ABAP stack) and I added it to the Interface Mapping in the Integration Repository. The result is exactly the soap message that the Google web-service is expecting.
I'm attaching the XSLT code below in case somebody has the same problem... thanks again for your hint!!
Regards!
Max
<xsl:transform version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:sap="http://www.sap.com/sapxsl"
>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
<ns1:doGoogleSearch xmlns:ns1="urn:GoogleSearch" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
      <key xsi:type="xsd:string"> <xsl:value-of select= "//key"/> </key>
      <q xsi:type="xsd:string"> <xsl:value-of select= "//q"/> </q>
      <start xsi:type="xsd:int"> <xsl:value-of select= "//start"/> </start>
      <maxResults xsi:type="xsd:int"> <xsl:value-of select= "//maxResults"/> </maxResults>
      <filter xsi:type="xsd:boolean"> <xsl:value-of select= "//filter"/> </filter>
      <restrict xsi:type="xsd:string"> <xsl:value-of select= "//restrict"/> </restrict>
      <safeSearch xsi:type="xsd:boolean"> <xsl:value-of select= "//safeSearch"/> </safeSearch>
      <lr xsi:type="xsd:string"> <xsl:value-of select= "//lr"/> </lr>
      <ie xsi:type="xsd:string"> <xsl:value-of select= "//ie"/> </ie>
      <oe xsi:type="xsd:string"> <xsl:value-of select= "//oe"/> </oe>
   </ns1:doGoogleSearch>
</xsl:template>
</xsl:transform>

SOAP Receiver Adapter Error in XI RWB - java.lang.NULLPointerException

Hi,
We have a asynchronous scenario in SAP-XI, where we are sending the PO data from SRM to third party (Hubspan / TNT). Proxy is being used at Sender side and SOAP Adapter is used for Receiver Communication Channel.
u2022SRM is sending around 1000 messages through background job and around 995 or 996 messages are being processed successfully and showing the proper XML payload as well in RWB. But 4-5 messages are getting failed in XI RWB for u2018java.lang.NullPointerExceptionu2019. For these failed messages we are not able to see the XML payload as well in XI RWB while these messages are showing successful status in MONI in SRM and XI and we are able to see the payload as well in MONI. The webservice is restarting and trying to send the payload three times in RWB, but it is getting the same Nullexception error.
04.11.2011 16:45:49.715 Success Delivering to channel: CC_B2B_HUBSPAN_RCV
04.11.2011 16:45:49.715 Success MP: Entering module processor
04.11.2011 16:45:49.715 Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
04.11.2011 16:45:49.716 Success SOAP: request message entering the adapter with user J2EE_GUEST
04.11.2011 16:45:49.716 Success SOAP: Target url: https://connect.hubspan.net/mh/server/tp=NMHG/ssid=DAA6F0E9AC1000BD03A41B363BBFD676
04.11.2011 16:45:49.999 Error SOAP: call failed: java.lang.NullPointerException
04.11.2011 16:45:49.999 Success SOAP: sending a delivery error ack ...
04.11.2011 16:45:49.999 Success SOAP: sent a delivery error ack
04.11.2011 16:45:49.999 Error SOAP: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException
04.11.2011 16:45:49.999 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException
04.11.2011 16:45:50.000 Error Exception caught by adapter framework: null
04.11.2011 16:45:50.022 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException.
04.11.2011 16:45:50.037 Success The message status set to WAIT.
u2022If we are resending the failed message from XI RWB, it is getting failed again with the same error. On the other hand if we are initiating the message again from SRM to Hubspan for the same PO, it is getting processed successfully in RWB but still not showing XML payload in RWB.
u2022If we are getting the payload from XI MONI for the failed message and doing a test with component monitoring in RWB, it is working fine.
Please help me to solve this issue.
Thanks
Sumit

Hi Sumit,
From my experience, when you transfer SAP POs through PI to external webservice, there should be some validation happens at the webservice layer of the target system before the web service passes the original information to their application layer. The validation can be anything like checking the Vendor address, Checking the correctness of the order ...etc etc . So i would suggest to ask your external web service folks to check if they have any validation in place before they pass the data to their application layer.
As you said only some POs/XMLs are failing, i strongly feel that this could be the issue.
Please note if you receive response code other than 200 from webservice, SOAP adapter treats that as error and send the same message back to AE.
Normally webservices won't send 200 code for any validation error
PS: you can still try to use XMLSpy to post the failed message to the web service to know the exact cause.

SOAP receiver adapter message: PI payload in parameter or body

Hi,
We tried to send messages via the following way to an external partner: SAP --> IDoc > XI (7.1)> HTTP(s) --> external partner.
We tried 2 techniques:
1. using a HTTP receiver communication channel with HTTP destination (using certificate).
As the path prefix in the destination, including parameters, exceeds 256 characters, we had to search for another solution
2. using the SOAP receiver communication channel with a target URL (https string) and indicator 'Do not use SOAP envelope' set
When sending the message, the body of the message, the IDoc XML payload doesn't seem to be read by the partner, probably related to the fact that they do not use the right software to do so, as decribed in forum:
SOAP receiver adapter error (SOAP receiver adapter error.)
Is this the right interpretation and is there no other solution than try to append the payload to the parameterlist ?
Regards,
Jan Macken

The partner found a way to read the body correctly

No SOAP Envelope error in SOAP Receiver Adapter

Hello Friends,
Informaiton:-
I have configured one Synchronous scenarion for SAP R/3 to PI 7.1 to Java based web applicaiton.
On the Receiver/Outbound side, i have configured the SOAP Receiver Adapter with the Target URL and SOAP Action.
Outbound and Inbound service interfaces have Request/Response and Fault messages.
Issue:-
While sending the Message, Below error is noticed in ABAP stack SXMB_MONI during the Call Adapter Stage and also in RWB (Channel Monitoring) .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: No SOAP Envelope but 1 {}RESPONSES; HTTP 200 OK
I also found that Request message is not reaching to the Java Web server.
I am taking the Same message Payload (found at Call Adapter Stage) and ussing it in XML Altova SPY Web client tool. There it is running scuccessfully and getting the Response message.
please suggest.
Thanks & Regards
Jagesh

Hi,
Yesterday i consumed the same WSDL file in Altova XML SPY and there it is working, getting the Response.
Now comparing the SOAP Request message reaching to the Third party Web server (which fall within the same Lane network)
from SAP PI and Altova XML SPY tool. I used TCP Gateway for the below scenarios.
(1)First i sent the SOAP message from PI and observed the RESPONSE message without the SOAP Envelope in TCP Gatway Trace and hence i am getting the No SOAP Envelope Error in PI.
(2)I consumed the same WSDLfile in Altova XML SPY and sent the SOAP message, here i got the Proper SOAP Response message and hence success in this case. (Used the same Data Payload as used in point 1)
(3)Now to identify the issue in the SOAP Request message being sent from PI, i used the same SOAP message sent in step 1 here, that means copy the entire SOAP ENvelope from the TCP gateway Trace and pasted it in Alota Spy and sent, there it is found running (got the response message from Third Party server).
One difference i found in HTTP Protocol statements in SOAP Request message in Point no 1 and Point no 2 above.
HTTP Protocols in Point 1 (Through PI).
POST HTTP/1.0
Accept: /
Host: 172.24.138.142:4544
User-Agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
CallingType: SA
content-id: <soap-00306EEAC2051ED1839136CEE8564900 sap.com>
Content-Type: text/xml; charset=utf-8
Content-Length: 1195
SOAPACTION: "Action1"
HTTP Protocols in Point 2 (Through Altova).
POST / HTTP/1.1
Content-Type: text/xml
User-Agent: XML Spy
SOAPAction: "Action1"
Host: 172.24.138.142:4544
Content-Length: 1195
Connection: Keep-Alive
Cache-Control: no-cache
Thanks to Mr. Stefan Grube for writting such a nice blog.
Troubleshooting SOAP, HTTP and Mail Adapter Scenarios with TCPGateway
Experts, please suggest me further.
Thansk & Regards
Jagesh

Payload at Adapter for System Errors - SOAP receiver adapter

Hi Everybody,
I am working on an Idoc to SOAP asynchronous scenario.
There are connection issues between SOAP adaper and the target webservice.
I need to capture the Idoc number from the message payload for the Erroneous messages at the adapter for the System errors.
Is there any way of capturing field values from the payload (Say, Idoc number) at the SOAP receiver Adapter level.
Helpful answers will be rewarded points.
Thanks & Regards,
Zabiulla

Hey,
I think you need to implement a module inorder to get the payload at receiver adapter module.
As far i concern you can not directly refer the payload in adapter in receiveer communication channel unless you have your own module, which gets the payload. Check the Modules tab in the communication channel and also regarding how to get the payload for error information, follow the steps mentioned in the below link, which gets the payload in file. hop it will resolve your issue.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/writepayloadtoafilefromAdapter+Module
Regards..
Prasanna..

SOAP receiver adapter for Axis

Hi,
I used SOAP receiver adapter for Axis like below:
Transport Prorocol : HTTP
Message Protocol : Axis
Url: http://<IP>:<Port>/xxx/WebService/services/Head/yyy
Authentication : Basic
User: <user>
Password: <password>
SOAP Version : 1.1
SOAP Action: : <method>
Encapsulation Format : MIME
Payload Extraction : SOAP Body
When i drive PI message it generates error below.
What must i do to solve this problem?
Thanks.
Error message
com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.adapter.axis.modules.AFAdapterBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.adapter.axis.modules.AFAdapterBean@20715646 for bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: javax.ejb.CreateException: java.lang.NoClassDefFoundError: org/apache/axis/types/URI$MalformedURIException

*Url:* http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest
When i use Url with *?wsdl* it generates below (it'is very long. I give part of it)
wsdl
<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:intf="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:tns1="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" xmlns:tns2="http://schemas.hp.com/AssetManager/R51/ACMetaData" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- 
- <wsdl:types>
- <schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:AdministrationTypes="http://schemas.hp.com/AssetManager/Custom/Head/Administration/Types" xmlns:CableTypes="http://schemas.hp.com/AssetManager/Custom/Head/Cable/Types" xmlns:CatalogTypes="http://schemas.hp.com/AssetManager/Custom/Head/Catalog/Types" xmlns:ChargebackTypes="http://schemas.hp.com/AssetManager/Custom/Head/Chargeback/Types"
<import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" />
<import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" />
- <annotation>
<documentation>Auto-generated schema for AssetCenter web services for Head/SapTest Implementation</documentation>
</annotation>
<import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SAM/Types" schemaLocation="../../schema/Head/SAM/SAMTypes.xsd" />
<import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" ......
<wsdl:operation name="retrieveAllBusinessAPIListByName">
<wsdlsoap:operation soapAction="retrieveAllBusinessAPIListByName" />
<wsdl:input name="retrieveAllBusinessAPIListByNameRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="retrieveAllBusinessAPIListByNameResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SapTestService">
<wsdl:port binding="impl:SapTestSoapBinding" name="SapTest">
<wsdlsoap:address location="http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

SOAP Receiver Adapter / Scenario calling WebServices

Hi Experts,
I am trying to call a web service. Configured a SOAP Receiver adapter. Message to Web Service goes fine but not shown with Checkered flag, but with icon with description "Log Version".
In response message for the request Error Category - MAPPING and Error ID "Cannot Read Payload".
Any ideas to clear this problem. I do have response mapping assigned to Message Interface. Message Interface is Synchronous.
Thanks in advance for any solutions.

can you verify that you are getting a response..try re-routing that to tcpgw and check if content is in line with expected response.
Regards
Ravi Raman

Soap Receiver Adapter - No Response Message

Hi, I've got the following scenario: Idoc - XI - Webservice. I've imported the WSDL from the .NET webservice and used the input and output messages in a syncronous interface. I've setup a SOAP Receiver adapter with the Webservice details. Everything is working fine when I call the webservice and the data is received 100% at the target system, but I am not getting ANY response back on XI.
RECEIVER SOAP ADAPTER Audit LOG:
2008-01-24 16:41:57 Success SOAP: request message entering the adapter with user J2EE_GUEST
2008-01-24 16:41:57 Success MP_LEAVE1
2008-01-24 16:41:57 Success The message was successfully delivered to the application using connection SOAP_http://sap.com/xi/XI/System.
2008-01-24 16:41:57 Success Acknowledgement creation triggered for type: AckNotSupported
2008-01-24 16:41:57 Success SOAP: completed the processing
2008-01-24 16:41:57 Success SOAP: continuing to response message 83638fb0-ca8a-11dc-b36c-00145eed9500
2008-01-24 16:41:57 Success SOAP: sending a delivery ack ...
2008-01-24 16:41:57 Success SOAP: sent a delivery ack
2008-01-24 16:41:57 Success The message status set to DLVD.
2008-01-24 16:41:57 Success Acknowledgement sent successfully for type: AckNotSupported
Has it got anything to do with the "AckNotSupported" type? Is "AckNotSupported" the default setting for the receiver SOAP adapter? If so, where do I change this setting?
When I call the webservice with the exact same input using a standalone tool, I get the response message back 100%. Any help will be appreciated.
Thanks
Rudi

Hey
you are confusing between a response and an acknowledgement.
response and acknowledgement and not one and the same thing.
response is basically used when you send some query to the receiver system and expect a set of value(s) for your query.for e.g sending a query to a Database(JDBC) or SAP system(RFC)
and acknowledgement is just a notification that the message was receiver by the receiver correctly,it does not returns you a set of value(s).
now coming to your question,ALEAUDIT IDOC is generated when an IDOC is posted,since in your case you are not posting and IDOC,instead your are sending it ,i m not sure if ALEAUDIT will be generated or not,one thing that will come to your rescue is that every receiver SOAP adapter expects a HTTP response(irrespective of you explicitly asking it or not).
a HTTP 200 means that messages were posted successfully,and HTTP 500 means application error,get this HTTP response and send it back to the SAP system,most probably you would need to use BPM for this.
Thanx
Aamir
Edited by: Aamir Suhail on Jan 24, 2008 11:26 AM

Soap receiver adapter exception

Hi,
I am using SOAP receiver adapter to access a web service that is hosted on SAP Web AS (in this case it is the integration server Web AS). I use the web services navigator to test the web service and the web service works fine. The name of the web service is 'RemoteCrossReferenceProcessor' and it has one operation 'crossReference'.
But with the soap adapter, I am getting OperationNotFoundException in the logs and my web service is not getting accessed. Here is the server log:
<u><i>An error occurred while processing the message security. Reason: . See trace entry .#3#com.sap.engine.interfaces.webservices.runtime.OperationNotFoundException#Found 0 operation definitions using keys: Key name:'first-body-element-ns' key value:'urn:RemoteCrossReferenceProcessor'; Key name:'SoapRequestWrapper' key value:'crossReference'; #[no trace for com.sap.security.core.server.ws.service.ServerSecurityProtocol (severity above PATH)]#
#1.5#0003BA0FF9EA0022000000840000688D0003F9349A3C2D61#1118429251382#com.sap.aii.af.ra.ms.impl.core.queue.SendConsumer##com.sap.aii.af.ra.ms.impl.core.queue.SendConsumer.onMessage(QueueMessage)######b40aca80d9be11d994360003ba0ff9ea#SAPEngine_System_Thread[impl:5]_47##0#0#Error##Java###Transmitting the message to endpoint using connection failed, due to: .#3#AFW#com.sap.aii.af.ra.ms.api.RecoverableException: NO_BACK_SYSTEM_IN_HOPLIST:#http://sapsand1:8000/sap/xi/engine?type=entry#</i></u>
Here is adapter configuration:
Transport Protocol:HTTP
Message Protocol:SOAP 1.1
Adapter Engine:Integration Engine
Target URL: http://<server_name>>:50000/RemoteCrossReferenceProcessor/Config?style=document
User:
Password:
Default SOAP Action:
I imported the WSDL into the external definition and used the messages from the WSDL for defining my interface mappings.
I am using XI 3.0 SR1 (SP 09).
I am out of ideas as to why the SOAP adapter is not calling my web service. Please help me with your suggestions.
Thanks and Regards.

HI Dani,
I was looking for this error and I found this post AXIS SOAP Receiver. This post says about other errors, but sugests many ideas to found the soluction, like:
1- non-deployed all AXIS jars; (but in this case it deployed all)
2- Exists this note for one erro in AXIS: (https://service.sap.com/sap/support/notes/1028961).
3- this document (http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b092777b-ee47-2a10-17b3-c5f59380957f) that have sets for header parameters. This is interesting becouse one of this parameters is obligatory but isn't filled, can occur error like "null object".
By the way, you can check if have update to AXIS (http://ws.apache.org/axis/), becouse isn't a SAP application and in other systems can have this error.
I hope this helps,
Romerito Silva

SOAP Receiver Adapter Target system down

Hi All,
My scenario is SOAP Receiver adapter --- > Portal system (Target system.).
Now team is taking restart of target system. It will take around 1 hr. So my question what will happen to the messages which is received by SOAP Receiver adapter in this time frame. ?

Hi Rajhans ,
All the messages during that period of time will fail with System Error ,We have to re-send these messages manually once the target system is up. In stead of selecting one by one you can set Multiple Selection On option to select the messages in RWB
.Please refer the weblog will give you some idea about the standard reports which can also be used to reprocess the messages.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID1051765250DB10924207601714756238End?blog=/pub/wlg/2728
do you have synchronous soap receiver or async?
Regards,
Srinivas

SOAP Receiver adapter with attachments not working

Hello,
I have a simple synchronous scenario like this; ABAP proxy with attachments to SOAP with attachments.
The SOAP receiver adapter has been configured with the parameters 'Do not Use SOAP envelope' and 'Keep attachments'. We create our own SOAP envelope with custom SOAP headers, so that's the reason for the 'Do not use SOAP envelope' setting.
When we test the scenario with an attachment then we get a timeout from PI. However, when we test the same scenario without any attachment then no errors occur.
The external webservice has also been tested with SOAP UI and it works fine.
Do you have any clues what the problem can be? What are we still missing in the configuration?
We did try with the adapter modules such as PayloadSwapBean and the Message TransformBean, so far without success...
Many thanks.
Roberto

Hi Stefan,
The attachments are not really big, around 150KB.
According to the other party (Oracle Service Bus) no messages with attachments have been received. In fact it seems like those messages never leave the PI server. SOAP requests without attachments are processed successfully.
Thanks
Roberto

SOAP Receiver Adapter - Read Header data on Synchronous Response

I have a scenario - flat file to SOAP. The web service provider sends a response that contains data in the Header that I need to access. I have tried to use the "Do Not Use SOAP envelope" option on my receiver SOAP adapter, and I have configured my request message type to include the soap envelope elements. However I'm getting the following error from the web service
com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Cannot process the message because the content type 'application/xml' was not the expected type 'text/xml; charset=utf-8'.
I've read some inputs on this error that say to use the Transform bean to adjust the content to text/xml. However I'm not sure how to do that. If that is the correct resolution to my problem, can someone provide detailed steps on how to add the Transform bean to the adapter module. I have no experience with adding items to the module tab.
If there are other ways to tackle this scenario to get access to the SOAP Header from the SOAP receiver adapter, please share those as well.
Thanks in advance.
Chris

Resolved with the following blog
/people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi

SOAP receiver adapter error

Similar Messages

Maybe you are looking for