SOAP : Receiver Adapter Security Settings in VA

Hi,
In the RFC to Webservice, synchronus scenario, I am getting HTTP 401 Unauthorized error.
I would like to know, do I need any extra security settings for the receiver SOAP Adapter in the Visual Administartor?
I configured proxy and comm channel, they are fine. Like the sender adapter, if I need any extra security settings please let me know.
Thanks &
Raj.

Hi Raj,
Check this SAP note-856597
Verify the userid/password etc..
HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

Similar Messages

SOAP RECEIVER ADAPTER --Security settings

Hi All,
I have a scenario where I need to communicate with a synchronous webservice with receiver SOAP Adapter. The standard also recommends the use of certificates to authenticate the server (Target Webservice) to the client (XI). How do I proceed with this? The Recever Webservice provider has provided a ssl certificate to use.
Whats the standard approach to be followed at Visual admin and the steps at recever communication channel and receiver agreement?
Thx in advance
Rachit

Hi Ravi,
Could you please tell what certificates are required for my Receiver SOAP synchronous scenario and from whom do I get the certificates?
Is the Webservice provider who will provide me the certificate which I need to install on XI server and call it in Communication channel..Configure certificate authentication.? What exact certificates I need to ask him to provide?
Or from XI I need to generate the certificates and provide to the webservice provider to install on his webserver?
At present I am getting the following error:
<ExceptionDetail xmlns="http://schemas.datacontract.org/2004/07/System.ServiceModel" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<HelpLink i:nil="true" />
<InnerException i:nil="true" />
<Message>Object reference not set to an instance of an object.</Message>
<StackTrace>at ABC.SureSite.Integrator.Cardax.Messaging.MessageProcessor.ProcessMessage(Message message) at SyncInvokeProcessMessage(Object , Object[] , Object[] ) at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage3(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage2(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage1(MessageRpc& rpc) at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)</StackTrace>
<Type>System.NullReferenceException</Type>
</ExceptionDetail>
Thanks in advance,
Rachit
Edited by: Rachit Sharma on Apr 29, 2008 3:01 PM

SOAP Receiver Adapter Proxy Settings

Hi Guys,
I am trying to send a SOAP message to an external webservice. I was able to get the message to arrive at the webservice when I used a proxy without user authenication.
I now need to get the SOAP adapter to use a proxy with user authenication. I have added the username and password on the communication channel, but I keep getting the following response error:
com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML
Has anyone got a suggestion as to how I may go about fixing this problem? Is there somewhere else that I need to configure the proxy server and user to allow the SOAP Receiver to send a message out?
Thanks very much,
Miguel

Hi Abhy,
I have checked the settings and they appear to be correct according to the help files.
I know that it has something to do with the authenication in the proxy server because the only thing that I have changed is the proxy server from a server that required no authenication to one that requires authentication. I have added the username and password and am getting this error.
According to the sap help, it is either a wrong target URL or invalid authentication. But the url worked previously, so it is definitely something to do with the authenication.
I have added this info on the communication channel. Is there somewhere else that I should add the proxy settings?
Thanks,
Miguel

Soap receiver adapter payload with certficate signature

I have a requirement.. where XI calls external webservice using SOAP.
I have configured SOAP receiver adapter, but the webservice wants the certificate authentication.. From XI we sent the certficate to external webservice and then in the comm channel I did activate the 'certficate' check box. It did not work.
For test purpose now they have deactivated the certficate authentication in their end.. it works if they deactivate. It means there is no issue with request structure.. purely the issue is when I use the certficate.
External webservice sent me the copy of the soap request which works for them.. that has security signature inside the payload. ( I have atteched below).
If anybody has done it have an idea how to do it please let me know.
- <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <soapenv:Header>
- <wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:BinarySecurityToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" wsu:Id="CertId-62149565">MIIGOzCCBaSgAwIBAgIQIKVRaj76KNaG5Dl6P5X7wzANBgkqhkiG9w0BAQUFADCBnjEPMA0GA1UEChMGaHAuY29tMRowGAYDVQQLExFJVCBJbmZyYXN0cnVjdHVyZTELMAkGA1UEBhMCVVMxIDAeBgNVBAoTF0hld2xldHQtUGFja2FyZCBDb21wYW55MUAwPgYDVQQDEzdIZXdsZXR0LVBhY2thcmQgUHJpbWFyeSBDbGFzcyAyIENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTA3MDMyMzAwMDAwMFoXDTA4MDMyMjIzNTk1OVowUDEgMB4GA1UEChQXSGV3bGV0dC1QYWNrYXJkIENvbXBhbnkxEDAOBgNVBAsUB1NlcnZlcnMxGjAYBgNVBAMTEWl0Zy5lcHJpbWUuaHAuY29tMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDVGa1x5j/RJHHkqYzEb9NIQGChffTb1D0LiYAP5arbxz0trCp8ZeG4FCH71jc6x9Ks3gC4YdWgQbOCz64wnpM8NvEVCZBHuxvdnPZpziPWQqDr0yvwSoCXg8mkeJrHql0MSm7TNiyhzCAzlmB9JgmoHrRtArJdXMRpHjdZQK3QIDAQABo4IDxTCCA8EwDAYDVR0TAQH/BAIwADAOBgNVHQ8BAf8EBAMCBaAwHwYDVR0jBBgwFoAUSlYfvIpRj/SDE8naXHlUyAK6q58wHQYDVR0OBBYEFE99o7D6AITUcqWVmeYzu/2k66VEMIIBKAYDVR0fBIIBHzCCARswggEXoIIBE6CCAQGUWh0dHA6Ly9vbnNpdGVjcmwudmVyaXNpZ24uY29tL0hld2xldHRQYWNrYXJkQ29tcGFueUlUSW5mcmFzdHJ1Y3R1cmUvTGF0ZXN0Q1JMLmNybIaBuWxkYXA6Ly9sZGFwLmhwLmNvbS9DTj1IZXdsZXR0LVBhY2thcmQlMjBQcmltYXJ5JTIwQ2xhc3MlMjAyJTIwQ2VydGlmaWNhdGlvbiUyMEF1dGhvcml0eSxPPUhld2xldHQtUGFja2FyZCUyMENvbXBhbnksQz1VUyxPVT1JVCUyMEluZnJhc3RydWN0dXJlLE89aHAuY29tP2NlcnRpZmljYXRlcmV2b2NhdGlvbmxpc3Q7YmluYXJ5MCoGA1UdJQEB/wQgMB4GCCsGAQUFBwMBBggrBgEFBQcDAgYIKwYBBQUHAwQwggEWBgNVHSAEggENMIAwgAYKKwYBBAELBAMCATCAMCkGCCsGAQUFBwIBFh1odHRwOi8vZGlnaXRhbGJhZGdlLmhwLmNvbS9jcDCABggrBgEFBQcCAjCAMB4WF0hld2xldHQtUGFja2FyZCBDb21wYW55MAMCAQIagZVBdXRob3JpdHkgdG8gYmluZCBIZXdsZXR0LVBhY2thcmQgQ29tcGFueSBkb2VzIG5vdCBjb3JyZXNwb25kIHdpdGggdXNlIG9yIHBvc3Nlc3Npb24gb2YgdGhpcyBjZXJ0aWZpY2F0ZS4gSXNzdWVkIHRvIGZhY2lsaXRhdGUgY29tbXVuaWNhdGlvbiB3aXRoIEhQLgAAAAAAAAAAAAAwge4GCCsGAQUFBwEBBIHhMIHeMCsGCCsGAQUFBzABhh9odHRwOi8vb25zaXRlLW9jc3AudmVyaXNpZ24uY29tMIGuBggrBgEFBQcwAqSBoTCBnjEPMA0GA1UEChMGaHAuY29tMRowGAYDVQQLExFJVCBJbmZyYXN0cnVjdHVyZTELMAkGA1UEBhMCVVMxIDAeBgNVBAoTF0hld2xldHQtUGFja2FyZCBDb21wYW55MUAwPgYDVQQDEzdIZXdsZXR0LVBhY2thcmQgUHJpbWFyeSBDbGFzcyAyIENlcnRpZmljYXRpb24gQXV0aG9yaXR5MA0GCSqGSIb3DQEBBQUAA4GBAMB3vOFZYe26MaZ8mpnoZwhWbLBFV/lxtefZT1uT7mKZiaHjVqwu3tN1eAYAUXtJQHVJTnCnbDm9zFunlvuEzGMt9PwXS61MK6GwPmtjEsevRnGIA7arvpjSJ1/EQlD620I7icM9BNXbElYFfsnZjlWKFTZz3VX1OT2qmJtVWpD</wsse:BinarySecurityToken>
- <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
- <ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
<ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1" />
- <ds:Reference URI="#id-24819136">
- <ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</ds:Transforms>
<ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />
<ds:DigestValue>6Mzpm7P8k3f8UuxbBMP4ZTC83Yc=</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>HcqMChOzlHFXTRRAf7kyTSQ5Jd53Yiu7oFLjkh5P3vayo2G4sjFv/qFKHX0E6a5xkBMTIRrW+30t7IdB4X0x35FPO1dTulz37KM1/jpLSGVxnjnWWeFZvseVjJsk5NTPiSE6GAjO7rFW/Vled2djATTmZsIgJCIfhLYVp112Uis=</ds:SignatureValue>
- <ds:KeyInfo Id="KeyId-21369792">
- <wsse:SecurityTokenReference xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="STRId-29015968">
<wsse:Reference URI="#CertId-62149565" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" />
</wsse:SecurityTokenReference>
</ds:KeyInfo>
</ds:Signature>
</wsse:Security>

go through this webinar and follow the steps...It will solve your problem..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1b657d59-0c01-0010-4fa8-f792fa412823
Regards,
Ravi

Soap receiver adapter exception

Hi,
I am using SOAP receiver adapter to access a web service that is hosted on SAP Web AS (in this case it is the integration server Web AS). I use the web services navigator to test the web service and the web service works fine. The name of the web service is 'RemoteCrossReferenceProcessor' and it has one operation 'crossReference'.
But with the soap adapter, I am getting OperationNotFoundException in the logs and my web service is not getting accessed. Here is the server log:
An error occurred while processing the message security. Reason: . See trace entry .#3#com.sap.engine.interfaces.webservices.runtime.OperationNotFoundException#Found 0 operation definitions using keys: Key name:'first-body-element-ns' key value:'urn:RemoteCrossReferenceProcessor'; Key name:'SoapRequestWrapper' key value:'crossReference'; #[no trace for com.sap.security.core.server.ws.service.ServerSecurityProtocol (severity above PATH)]#
#1.5#0003BA0FF9EA0022000000840000688D0003F9349A3C2D61#1118429251382#com.sap.aii.af.ra.ms.impl.core.queue.SendConsumer##com.sap.aii.af.ra.ms.impl.core.queue.SendConsumer.onMessage(QueueMessage)######b40aca80d9be11d994360003ba0ff9ea#SAPEngine_System_Thread[impl:5]_47##0#0#Error##Java###Transmitting the message to endpoint using connection failed, due to: .#3#AFW#com.sap.aii.af.ra.ms.api.RecoverableException: NO_BACK_SYSTEM_IN_HOPLIST:#http://sapsand1:8000/sap/xi/engine?type=entry#
Here is adapter configuration:
Transport Protocol:HTTP
Message Protocol:SOAP 1.1
Adapter Engine:Integration Engine
Target URL: http://<server_name>>:50000/RemoteCrossReferenceProcessor/Config?style=document
User:
Password:
Default SOAP Action:
I imported the WSDL into the external definition and used the messages from the WSDL for defining my interface mappings.
I am using XI 3.0 SR1 (SP 09).
I am out of ideas as to why the SOAP adapter is not calling my web service. Please help me with your suggestions.
Thanks and Regards.

HI Dani,
I was looking for this error and I found this post AXIS SOAP Receiver. This post says about other errors, but sugests many ideas to found the soluction, like:
1- non-deployed all AXIS jars; (but in this case it deployed all)
2- Exists this note for one erro in AXIS: (https://service.sap.com/sap/support/notes/1028961).
3- this document (http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b092777b-ee47-2a10-17b3-c5f59380957f) that have sets for header parameters. This is interesting becouse one of this parameters is obligatory but isn't filled, can occur error like "null object".
By the way, you can check if have update to AXIS (http://ws.apache.org/axis/), becouse isn't a SAP application and in other systems can have this error.
I hope this helps,
Romerito Silva

Issue while passing Target URL dynamically in SOAP Receiver Adapter

Experts,
I am stuck with an issue while passing the Target URL dynamically.
The UDF required for this works just fine. I can see the Target URL in Dynamic Configuration header(The Key is TServerLocation) in SXMB_MONI but the request that I am sending is not reaching the web service.
Some posts have suggested to hard code the Target URL as http://.
Below is the error that I am getting when I hard the Target URL as http://:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>RecoverableException</code>
 <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML
 at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
 at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
 at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
 at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
 </s:SystemError>
 </detail>
 </SOAP:Fault>
 </SOAP:Body>
</SOAP:Envelope>
When I hard code the Target URL as Test (any dummy value), the error that I get is different. (Detailed error shown below)
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>RecoverableException</code>
 <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: no scheme
 at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
 at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
 at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
 at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
 </s:SystemError>
 </detail>
 </SOAP:Fault>
 </SOAP:Body>
</SOAP:Envelope>
I've referred the post [Dynamic URL for SOAP receiver adapter;.
I am on PI 7.0.
Any help in this regard is highly appreciated.
Best Regards,
Vijay

Issue resolved... by doing this:
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "TAuthKey");
conf.put (key2, "username");
In the advanced tab of the communication channel, set the flag "View Authorization keys", and then added "username" (user to access the dynamic target url) and the password (2 times).
That's it...

HTTPS config in SOAP receiver adapter ?

Hi Guys,
I have configured the soap receiver adapter with the URL
*https://xxxx.abcd.com/xyzv/bbbb.asmx with the user authentication *
I have tested the url and the user and pw in the browser and they are working fine but the messages are failing the soap receiver adapter with the 401 unautorized error as the message from the Audit log in the RWB.
Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized. Setting message to status failed.
Do i need to configure the Java Stack for HTTPS ? The communicaion is between the XI system and a third part system internally.
any help would be appreciated ?
Thanks,
Srini

Hi Guys,
I have solved the problem and NTLM works with PI 7.0 but we need to configure soap axis adapter
The Windows NTLM authentication is supported by Axis's CommonsHTTPSender handler and consequently it is supported by the Axis adapter's corresponding handler com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender. Read about How Can I use CommonsHTTPSender as the transport handler? if CommonsHTTPSender is not enabled on your system. Once it is enabled, you can use com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender instead of default com.sap.aii.adapter.axis.ra.transport.http.HTTPSender as the transport handler in the module configuration and set the authentication setting to NTLM and enter usename as domain\username in the channel configuration
To use CommonsHTTPHandler, the optional Jakarta-Commons-Net, Jakarta-Commons-HttpClient, Jakarta-Commons-Codec libraries are required. Make sure that these libraries are available for the Axis adapter at the deployment check page If these components are not available, you will need to include the corresponding jar files (commons-codec-1.3.jar, commons-httpclient-3.0.jar, and commons-net-1.0.0-dev.jar from the Axis 1.4 release) in aii_af_axisprovider.sda and deploy this archive (see How to prepare aii_af_axisprovider.sda?).
The provider.xml file must include the jar-name entries for these jar files, as shown in:
 <jars>
 <jar-name>commons-net-1.0.0-dev.jar</jar-name>
 <jar-name>commons-codec-1.3.jar</jar-name>
 <jar-name>commons-httpclient-3.0.jar</jar-name>
 </jars>
Once you do all the above settings, NTLM works fine
Thanks,
Srini

Enable communication HTTPS in SOAP Receiver Adapter

Hi gurus,
I have configured the soap receiver adapter with the URL:
"https://www.xxxx.com/yyyyyyyyyy.asmx" without the user authentication.
I have executed the webservice since SOAP-UI and works well. But if I run the webservice from SAP XI does not work. In the transaction SXMB_MONI shows the following error:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection closed by remote host.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>"
What is happening?
Thanks,
Jose.

Jose,
client certificate is the "top" authentication mechanism during SSL handshake, like this :
- XI authenticate the SSL certificate (server) issued by target server against a (trusted) list of known certification authority, then target will ask XI to present its own certificate (client) and it will make sure this client certificate can be trusted (verifying it has been certified by a known authority). Handshake is "done"
but you can also have
- "anonymous" mode (XI will make sure SSL cert provided by the target has been issued - and so can be trusted - by a (well)known certification authority), that's it. Target does not expected any other security feature
- user/pwd over a SSL connection (like above, but you'll also have to provide a user and pwd for authentication at target level)
Hope this helps
Chris

Can't create a new SOAP receiver adapter

Hi,
I configure a new SOAP receiver adapter in the integration directory and activate the adapter.
When I send trough XI a message to this communication adapter an error occurs in the defaultTrace.trc :
failed to set up the adapter for channel .....;caused by java.lang.NullPointerException
No stacktrace.
I try to set the communication channel inactive and active and also restart the adapter engine but nothing works.
Do someone solve this problem ?
Regards,
Gerald

Hi Gerald,
Check the below and see if anything is missing/wrong
( may not be the exact order as below, but you need to reach the last one 'your adapter')
runtime workbench->component monitoring -> Integration Server -> adapter engine ->adapter monitoring (in status tab)-> Soap -> your adapter.
Do the same for your 'sender adpater' also
This may help to identify whats wrong in your settings
Hope this helps to fix your issue
Regards
Vishnu

Usage of Module processor in SOAP Receiver Adapter

Hi,
I have scenario where I am calling an external Web Service via XI. Unfortunately I need Java Mapping to generate the complete SOAP Message (there are some special header elements required by the Web Service) and flag 'no soap' in the SOAP Receiver Adapter. This works fine, but I have additional Web Service Calls that have the same Header logic and I don't want to use Java Mapping all the time.
I was wondering if it is possible to use graphical User Mapping for the Business Data that goes to the SAOP Body as a payload and use Java code to generate the SOAP Message (actually the SOAP Wrapper and the Header).
Can I do this in XI using the Module processor in the SOAP Receiver adapter or do I have to use two mappigs, one based on the Graphical mapping and another using Java Mapping? Is it feasible at all in XI?
Thanks in advance.

Hi,
You can use Module Processor.
But,
1. If it is a synch call, in when the message is going from the SOAP adapter to the Webservice, you will need to manually Add the SOAP header as you want . ( you will need to create the entire SOAP mesage as the output of the Module ).
2. When the response comes back, the same module will need to remove the SOAP header etc and pass a valid , XML message to the Graphical mapping.
If you have a requirement that some fields of the SOAP header will be needed to be accesed in the Response mapping, then you would need to either add this field to some field in the response payload.
Better option would be to use, Either a Java or a XSL mapping that does all the required stuff for you.
Regards
Bhavesh

Dynamic URL in SOAP Receiver adapter

Hi all,
I have a scenario where I am using a SOAP receiver adapter to send a cXML document to some vendors. I need to change the URL based on the vendor number (passed by sender SRM system). So I have created a user-defined function and used in message mapping to assign the right URL to the variable TServerLocation. But the communication channel still prompts for a static URL which appears to be a mandatory field. Even though the DynamicConfiguration tab in Message Monitoring shows that the TServerLocation was correctly assigned, the scenario does not work when I put some dummy in the static URL field like 'dummy' or '*'. Any ideas on how to make the communication channel go for the dynamic URL field and ignore the static URL field? I have already selected the'Use Adapter Specific Message attributes' and 'Variable Transport Binding' check boxes. Am I referring to the correct variable that references the target URL? Also other than the two checkboxes that I mentioned, I am not displayed anything else under "Adapter Specific Message Attributes" section in the comm. channel.
Thanks

James,
I ve just been digging into SAP help, and have tried it too ... Looks like it doesnt work the way it is supposed to.
Anotheer point i found was, in the FILE ADAPTER, when we say ADAPTER SPECIFI ATTRIBUTES , we can select the attirbutes.. This is not possible in a SOAP adapter...
Maybe, we can only access the ADAPTER SPECIIFC ATTIRIBUTES of a SOAP adapter, but cannot set them dynamically.
Let me know if you find something on this issue.
Regards,
Bhavesh

SOAP receiver adapter digest authentization

Hallo,
I have scenario with SOAP receiver adapter configured as follow:
Adapter Type: SOAP
Transport Protocol: HTTP
Message Protocol: SOAP 1.1
Adapter Engine: Integration Serer
Target URL: http://localhost:8099/webservices/test_v1_1_2
Configure User Authentication
User: ****
Pasword:****
but WS need digest HTTP authentication and SOAP adapter send in header Authentication: Basic.
Hou can I change authentication method for SOAP protocol?
Thx

Hallo,
I solved this problem by using AXIS framework. I hope that this short instruction help to someone.
1. In SOAP receiver CC you have to set up Transport Protocol to HTTP(AXIS) and Message protocol to AXIS
2. Now you can switch Authentication to Digest (NOW adapter will still send Basic!!! Digest Authorization is Supported only by the following handler: com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender)
3. On Module tabs in section Module configuration change type HTTPSender to CommonHTTPSender:
(trp handler.type java:com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender)
4. Save and Activate
Before you start to use AXIS framefork you have to deploy necessary library.
This thread help:
Re: How to install SOAP Axis adapter and where is it available ??
Be carefull, for digest authorization you have to linked Optional library "Jakarta-Commons HttpClient" too.
Good luck.
JK

Soap Receiver Adapter Error. Pls advice urgent

Hi All,
While using Soap Receiver Adapter for synchronous communication
*My Soap Request is:*
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:SendMessage xmlns:ns1="urn:MMWebSrvService">
<strFrom>XI</strFrom>
</ns1:SendMessage>
*My Soap Response from server is:*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<tns:SendMessageResponse xmlns:tns="urn:MMWebSrvService" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<return xsi:type="xsd:int">-1</return>
<strErrorDescription xsi:type="xsd:string">String reference not set to an instance of a String. Parameter name: s</strErrorDescription>
</tns:SendMessageResponse>
How to resolve the error.
Regards

Henry,
Your xml message is not xsd compliant...see if you can generate a xml message using your wsdl with random values, compare that to your imcoming msg..and thats your issue..
Hope that helps
Regards
Ravi Raman
Reward points if helpful !

SOAP Receiver adapter error. SOAP CALL Failed

Hi ,
I am implementing scenario R/3->RFC adapter->XI->SOAP REceiver adapter->Web Service (Synchronous). I am getting the error.
SOAP: call failed
SOAP: error occured: java.net.ConnectException: Connection timed out
Message log is as below.
Any clue ?
Thanks & Regards,
Mathew
2005-10-31 18:59:58
Success
output
1130810398454
The message was successfully received by the messaging system. Profile: XI URL: http://host:Port/MessagingSystem/receive/AFW/XI
2005-10-31 18:59:58
Success
output
1130810398458
Using connection AFW. Trying to put the message into the request queue.
2005-10-31 18:59:58
Success
output
1130810398458
Message successfully put into the queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message was successfully retrieved from the request queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message status set to DLNG.
2005-10-31 18:59:58
Success
output
1130810398460
Delivering to channel: CC_CALCULATOR
2005-10-31 18:59:58
Success
output
1130810398564
SOAP: request message entering the adapter
2005-10-31 19:03:07
Success
output
1130810587497
SOAP: call failed
2005-10-31 19:03:07
Error
output
1130810587497
SOAP: error occured: java.net.ConnectException: Connection timed out
2005-10-31 19:03:07
Error
output
1130810587498
Exception caught by adapter framework: Connection timed out

Hi Mathew,
Check if the webservice is availble??? Based on the error below, it looks like the message is timing out at the Adapter Engine level waiting for the connection to make the webservice call...
Prasad

SOAP receiver adapter for Axis

Hi,
I used SOAP receiver adapter for Axis like below:
Transport Prorocol : HTTP
Message Protocol : Axis
Url: http://<IP>:<Port>/xxx/WebService/services/Head/yyy
Authentication : Basic
User: <user>
Password: <password>
SOAP Version : 1.1
SOAP Action: : <method>
Encapsulation Format : MIME
Payload Extraction : SOAP Body
When i drive PI message it generates error below.
What must i do to solve this problem?
Thanks.
Error message
com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.adapter.axis.modules.AFAdapterBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.adapter.axis.modules.AFAdapterBean@20715646 for bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: javax.ejb.CreateException: java.lang.NoClassDefFoundError: org/apache/axis/types/URI$MalformedURIException

*Url:* http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest
When i use Url with *?wsdl* it generates below (it'is very long. I give part of it)
wsdl
<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:intf="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:tns1="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" xmlns:tns2="http://schemas.hp.com/AssetManager/R51/ACMetaData" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- 
- <wsdl:types>
- <schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:AdministrationTypes="http://schemas.hp.com/AssetManager/Custom/Head/Administration/Types" xmlns:CableTypes="http://schemas.hp.com/AssetManager/Custom/Head/Cable/Types" xmlns:CatalogTypes="http://schemas.hp.com/AssetManager/Custom/Head/Catalog/Types" xmlns:ChargebackTypes="http://schemas.hp.com/AssetManager/Custom/Head/Chargeback/Types"
<import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" />
<import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" />
- <annotation>
<documentation>Auto-generated schema for AssetCenter web services for Head/SapTest Implementation</documentation>
</annotation>
<import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SAM/Types" schemaLocation="../../schema/Head/SAM/SAMTypes.xsd" />
<import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" ......
<wsdl:operation name="retrieveAllBusinessAPIListByName">
<wsdlsoap:operation soapAction="retrieveAllBusinessAPIListByName" />
<wsdl:input name="retrieveAllBusinessAPIListByNameRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="retrieveAllBusinessAPIListByNameResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SapTestService">
<wsdl:port binding="impl:SapTestSoapBinding" name="SapTest">
<wsdlsoap:address location="http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

SOAP : Receiver Adapter Security Settings in VA

Similar Messages

Maybe you are looking for