SOAP receiver monitoring

Hello,
I can't access the message monitoring availbale at the following URL
http://xxxxxxx:50000/MessagingSystem/monitor/monitor.jsp
I'm having the following excpetion :
java.lang.IllegalArgumentException: Illegal pattern character 'j'
     at java.text.SimpleDateFormat.compile(SimpleDateFormat.java:675)
     at java.text.SimpleDateFormat.initialize(SimpleDateFormat.java:494)
     at java.text.SimpleDateFormat.(SimpleDateFormat.java:443)
     at jsp_monitor1155826196479.initRB(jsp_monitor1155826196479.java:51)
     at jsp_monitor1155826196479._jspService(jsp_monitor1155826196479.java:83)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:541)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
Do you have any ideas what is wrong in our configuration?
Best regards,
Bela

Hi,
did anyone managed to solve this, we have exactly the same error.
thanks!

Similar Messages

No Payload in the soap receiver call adapter ?

Hi Guys,
configured Proxy-SOAP Asynchronus process and in the sxmb_moni, i am unable to see the payload under call adapter in sxmb_moni, but i am able to see the payload under RWB in MDT. The message is checked successful in monitor.
I am not understanding why i am unable to see the payload under call adapter in sxmb_moni. I am not getting the data into my receiver system.
Do i need to mention the QOS as EO in the soap url in the soap receiver adapter configuration ?
any help would be really appreciated
Thanks,
srini

Hi,
You can only see the Payload(both with and without transformation) in MONI. message that is handling by adapter can only seen in Adapter Framework using RWB-Message Monitoring or using Communication Channel Monitoring.
Regards,
Farooq.

Rewards points if you find it usefull.

Dynamic URL in SOAP Receiver adapter

Hi all,
I have a scenario where I am using a SOAP receiver adapter to send a cXML document to some vendors. I need to change the URL based on the vendor number (passed by sender SRM system). So I have created a user-defined function and used in message mapping to assign the right URL to the variable TServerLocation. But the communication channel still prompts for a static URL which appears to be a mandatory field. Even though the DynamicConfiguration tab in Message Monitoring shows that the TServerLocation was correctly assigned, the scenario does not work when I put some dummy in the static URL field like 'dummy' or '*'. Any ideas on how to make the communication channel go for the dynamic URL field and ignore the static URL field? I have already selected the'Use Adapter Specific Message attributes' and 'Variable Transport Binding' check boxes. Am I referring to the correct variable that references the target URL? Also other than the two checkboxes that I mentioned, I am not displayed anything else under "Adapter Specific Message Attributes" section in the comm. channel.
Thanks

James,
I ve just been digging into SAP help, and have tried it too ... Looks like it doesnt work the way it is supposed to.
Anotheer point i found was, in the FILE ADAPTER, when we say ADAPTER SPECIFI ATTRIBUTES , we can select the attirbutes.. This is not possible in a SOAP adapter...
Maybe, we can only access the ADAPTER SPECIIFC ATTIRIBUTES of a SOAP adapter, but cannot set them dynamically.
Let me know if you find something on this issue.
Regards,
Bhavesh

SOAP Receiver Adapter Always "Running"

I have a SOAP receiver adapter that is working fine. I call an MDM web service, which sends a response, but I do not need it. I have tried a synchronous and asyncronous interface. Both work fine.
But...with both, the communication channel monitor in RWB always shows a Short Log of "running".
Is this right? I expected that the Short Log value would reset to inactive or something.
Processing Details...
2009-01-28 10:13:29 Success Message successfully received by messaging system. Profile: XI URL: http://snadc80i:50000/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2009-01-28 10:13:29 Success Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2009-01-28 10:13:29 Success Message successfully put into the queue.
2009-01-28 10:13:29 Success The message was successfully retrieved from the receive queue.
2009-01-28 10:13:29 Success The message status set to DLNG.
2009-01-28 10:13:29 Success Delivering to channel: SOAP_MDMIn_MDMUpdateRecord
2009-01-28 10:13:29 Success MP: Entering module processor
2009-01-28 10:13:29 Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
2009-01-28 10:13:29 Success SOAP: request message entering the adapter with user J2EE_GUEST
2009-01-28 10:13:29 Success SOAP: completed the processing
2009-01-28 10:13:29 Success SOAP: sending a delivery ack ...
2009-01-28 10:13:29 Success SOAP: sent a delivery ack 2009-01-28 10:13:29 Success MP: Leaving module processor
2009-01-28 10:13:29 Success The message was successfully delivered to the application using connection SOAP_http://sap.com/xi/XI/System. 2009-01-28 10:13:29 Success The message status set to DLVD.
Thanks,
Keith

Short Log only displays the status of communication channel. So if it says running, then it would mean that the channel is in running status. When not in use, it doesn't get deactivated itself. I guess "running" is what people wait to see
Regards,
Prateek

Problem in testing SOAP receiver adapter using SOAP UI

Dear Experts,
I'm trying to test my SOAP receiver adapter as mentioned in the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/21844. [original link is broken] [original link is broken] [original link is broken] But, my request from ECC proxy keeps failing in XI communcation channel monitor. I've configured my receiver adapter http://ip:8080/mockSoapHTTPBinding and kept the authentication as NONE. Can any of you suggest?
ip - is my system ip shown in ipconfig.
mockSoapHTTPBinding - is the path.
Thanks.

What is the error of the messages? Are the messages leaving the SOAP adapter?
Please try both:
1. Go to Runtime Workbench -> Component Monitoring -> Adapter Engine -> Test message. Then, execute the message directly without the intermediate of the Proxy sender. This will allow you to check only the receiver SOAP.
2. Please use the TCPGateway tool attached from the note below. It will be a "man-in-the-middle" between the target WS and the Receiver SOAP channel, tracking the whole HTTP/SOAP message. Check if the message is well-formed.
[Note 856597 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=856597]
under question "Q: How can I trace the whole message?"

SOAP receiver: error HTTP 302 (Moved Temporarily)

Dear all,
I configured scenario where SOAP web service is consumed from SAP ABAP system via PI. The problem is in communication with the web service: the error observed in communication channels monitor for the configured SOAP receiver channel is:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 302 Moved Temporarily: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 302 Moved Temporarily
The consumed web service is based on the function module developed in SAP NetWeaver 7.00 system. Endpoint for the service was then created via SOAMANAGER, generated binding's address was used as a target URL in the SOAP receiver channel.
If the service is consumed not via PI, but tested directly from external SOAP client (I used soapUI) with the same WSDL and endpoint, the response is fine and error-free.
Please advise possible root cause of the issue.
My regards,
Vadim

Hi,
I am working on a similar scenario where I my consuming an external web service using https protocol from PI.
I have configured a soap receiver channel to call the target url of this web service as https://portal.xyz.org.uk/webservice_alt.
I am getting an error HTTP 302 suggesting that PI is not able to follow the re-direction to the target URL as the service resides not on that URL but on https://portal1.xyz.org.uk/webservice_alt or https://portal2.xyz.org.uk/webservice_alt.
This is their server fail over handling mechanism which is very common. But PI 7.0 is not able to handle this.
So if I change the target URL on the SOAP receiver channel to https://portal1.xyz.org.uk/web service or https://portal2.xyz.org.uk/webservice_alt , PI works fine without errors . But this is not the right approach because, every time the web service provider takes one of these systems down for upgrade/patching etc, they inform us and then I manually go and change the target URL to the available server on my production PI system config.
My problem is I want to resolve this redirection error in PI. I have tried raising a call with SAP itself and they pointed out to use Axis adapter which is still not working.
So I am here asking for help. any suggestions please from the experts?
Thanks
Jhansi.

No SOAP Envelope error in SOAP Receiver Adapter

Hello Friends,
Informaiton:-
I have configured one Synchronous scenarion for SAP R/3 to PI 7.1 to Java based web applicaiton.
On the Receiver/Outbound side, i have configured the SOAP Receiver Adapter with the Target URL and SOAP Action.
Outbound and Inbound service interfaces have Request/Response and Fault messages.
Issue:-
While sending the Message, Below error is noticed in ABAP stack SXMB_MONI during the Call Adapter Stage and also in RWB (Channel Monitoring) .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: No SOAP Envelope but 1 {}RESPONSES; HTTP 200 OK
I also found that Request message is not reaching to the Java Web server.
I am taking the Same message Payload (found at Call Adapter Stage) and ussing it in XML Altova SPY Web client tool. There it is running scuccessfully and getting the Response message.
please suggest.
Thanks & Regards
Jagesh

Hi,
Yesterday i consumed the same WSDL file in Altova XML SPY and there it is working, getting the Response.
Now comparing the SOAP Request message reaching to the Third party Web server (which fall within the same Lane network)
from SAP PI and Altova XML SPY tool. I used TCP Gateway for the below scenarios.
(1)First i sent the SOAP message from PI and observed the RESPONSE message without the SOAP Envelope in TCP Gatway Trace and hence i am getting the No SOAP Envelope Error in PI.
(2)I consumed the same WSDLfile in Altova XML SPY and sent the SOAP message, here i got the Proper SOAP Response message and hence success in this case. (Used the same Data Payload as used in point 1)
(3)Now to identify the issue in the SOAP Request message being sent from PI, i used the same SOAP message sent in step 1 here, that means copy the entire SOAP ENvelope from the TCP gateway Trace and pasted it in Alota Spy and sent, there it is found running (got the response message from Third Party server).
One difference i found in HTTP Protocol statements in SOAP Request message in Point no 1 and Point no 2 above.
HTTP Protocols in Point 1 (Through PI).
POST HTTP/1.0
Accept: /
Host: 172.24.138.142:4544
User-Agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
CallingType: SA
content-id: <soap-00306EEAC2051ED1839136CEE8564900 sap.com>
Content-Type: text/xml; charset=utf-8
Content-Length: 1195
SOAPACTION: "Action1"
HTTP Protocols in Point 2 (Through Altova).
POST / HTTP/1.1
Content-Type: text/xml
User-Agent: XML Spy
SOAPAction: "Action1"
Host: 172.24.138.142:4544
Content-Length: 1195
Connection: Keep-Alive
Cache-Control: no-cache
Thanks to Mr. Stefan Grube for writting such a nice blog.
Troubleshooting SOAP, HTTP and Mail Adapter Scenarios with TCPGateway
Experts, please suggest me further.
Thansk & Regards
Jagesh

SOAP receiver inactive problem

Hi Gurus,
I am using a SOAP receiver channel, I actived this SOAP CC in ID , but when I go to RWB and goto Communication Channel monitor, found the SOAP receiver channel status is "Channel started but inactive" with a yellow triangle.
Our XI version is PI7.0 SP11.

Hi,
send the first message with it and check again
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

SOAP receiver exception problem

Hi XI expert,
I am using scenario as following:
ABAP proxy -> xi -> soap receiver -> webservice
in sxmb_moni, the message runs ok. but in RWB, there are some error in CC monitor.
2007-07-07 11:33:54 Success SOAP: continuing to response message e305dd90-2c3a-11dc-95af-0015c5f7cd3b
2007-07-07 11:33:54 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:     Compilation Errors
2007-07-07 11:33:54 Success SOAP: sending a delivery error ack ...
2007-07-07 11:33:54 Success SOAP: sent a delivery error ack
2007-07-07 11:33:54 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:     Compilation Errors
2007-07-07 11:33:54 Error Exception caught by adapter framework: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:     Compilation Errors
2007-07-07 11:33:54 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:     Compilation Errors.
2007-07-07 11:33:54 Success The asynchronous message was successfully scheduled to be delivered at Sat Jul 07 11:38:54 CST 2007.
2007-07-07 11:33:54 Success The message status set to WAIT.
What is the problem? and how can I deal with to identify the problem?

hi
Go through this links
Check out these threads..
RFC -> XI -> External web service
How to resolve this RFC_adapter_sender to SOAP_adapter_receiver Exception?
Why getting "DeliveryExcetion" in SOAP->XI->RFC scenario?
You may refer these fallowing weblogs
/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
Thanks & Regards
Sridhar.Bommireddy

SOAP Receiver Channel 2 nodes inactive in Production system

Hi All,
We are facing an issue with the SOAP receiver channels in production system. There are 4 nodes which can be seen in the communication channel monitoring and out of which 2 have the status as inactive and the short log says "inactive or never used".
But the same nodes are active on the sender SOAP channel and all other channels.We have also checked the Status of the SOAP service that is also set to active.
Now when the server (App server5 in our case) is switched off, which has the 2 active nodes, the messages are not processed since the nodes on the other server are inactive.
Request you to please help us out in finding out why the nodes are in inactive status only for SOAP receiver channels. Do we need to change any settings at the adapter engine level.
Thank you.
Regards,
Sarvesh Desai
Edited by: Sarvesh Nispat Desai on Aug 25, 2010 5:25 PM

There is an error in reporting the status of SOAP channels. This error has already been fixed by SAP and is available as a fix in higher releases (PI 7.10 and above, latest SPs) .
The status "inactive or never used" is shown in channel monitoring at the following two times:
1. After creating a new SOAP channel (sender/receiver) till this channel processes any new message.
2. After the PI system is restarted, all the SOAP channels show this status, though they are ready to handle any incoming/outgoing messages. The channels continue to display this status till they process any new message.
In both these situations, the SOAP Channel can handle/process messages successfully. So, kindly ignore this channel status ("inactive or never used") reporting error in channel monitoring. This will not at all hamper the normal functioning of the SOAP channels.
Hope this answers your query.

Error in SOAP receiver

Hello All,
I am getting the below error in the sender communication channel for FILE - PI -SOAP scenario.
i am using integrated configuration in configuration.
"Transmitting the message using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: Could not determine mapping steps for message c24a403b-b048-11e0-9c28-00001e07abf4."
Specified operation mapping in the integrated configuration correctly. cache is also up to date.
Could you please let me know what could be the issue.

Hi ,
Pleas make sure your system is PI 7.1 EHP1 otherwise you cant do this.
also you cant use ABAP mapping or paremeterized mapping with AAE also dont able to see error message in SXMB_MONI
I will suggest you to go with classical approach. or Atleast first test the end to end interace with classical ID IR approach.
And then go with AAE for performance improvement
Your error may be for response mapping for SOAP.
Please set messaging.syncMessageRemover.removeBody" parameter to "false",in the SAP XI AF Messaging Service
refer this help.
http://help.sap.com/saphelp_nw04s/helpdata/EN/59/25ee41c334c717e10000000a155106/frameset.htm
This .property will allow you to error analysis soap response.
Do you have any fault message structure and mapping in SOAP receiver side?
Do a dummy change in the maaping and activate and then do complete cache refresh0
Delta Cache Refresh:
CPA-Cache and Mapping Runtime Cache are updated independently, i.e.
1.
Mappings objects per activation/change are transferred to ALL Mapping Runtime Caches of all Advanced Adapter Engines
2.
CPA-Cache-Refresh is usually carried out after activation/change of directory objects. Objects are just transferred to the Advanced Adapter Engine where configured to be used
Can be viewed in the Cache Monitoring of the RWB. (other monitoring is reused; no SXMB_MONI).
Refer this:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70b8adc3-728c-2a10-7fad-d43f29074ef8?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?quicklink=index&overridelayout=true

Webservices Security in SOAP Receiver Adapter

Hi All,
I am configuring web services security settings in my File To Webservice scenario.
The scneario is:
File -
asynch--XISynch-Webservice(X.509)
The webservice is using X.509 certificates for security.
I have configured SOAP receiver channel with webservices secuirty settings and same with Receiver agreement.
But when I run this scenario in the SOAP Receiver channel monitoring I get below error.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: java.security.PrivilegedActionException: com.sap.aii.af.security.impl.exception.MessageSecurityException: MessageSecurityException in Method: ApplyMessageLevelSecurity.run(). AccessControlException. Please check that your Code has the XiSecurityRuntimePermission.Context: com.sap.aii.af.security.impl.exception.MessageSecurityException: Exception in Method: apply( Message, CPALookupObject ). General exception, no further informations. Message: MessageSecurityContext in Method: apply( Message, CPALookupObject ). ApplyThread-Exception Message: ProcessException in Method: run(). Key: 0700; To-String: com.sap.aii.af.security.impl.exception.MessageSecurityException: ProcessException in Method: run(). Key: 0700. To-String: com.sap.aii.af.security.impl.exception.MessageSecurityException: MessageSecurityContext in Method: apply( Message, CPALookupObject ). ApplyThread-Exception Message: ProcessException in Method: run(). Key: 0700; To-String: com.sap.aii.af.security.impl.exception.MessageSecurityException: ProcessException in Method: run(). Key: 0700.
Does anybody have idea about this error?
Please help me to resolve this.
Thanks,
Shweta.

Hi,
I am doubtful if after add ing all the security realted settings you could be able to test it via RWB monitoring.
Its better to test this kind of scenario with either real time application where all security certificates and settings will on right place.
Thanks
Swarup

SOAP RECEIVER SSL Problems

Dear Community,
I have configured a SOAP Receiver to an external web service (https://server:7002/service). I have use IE to get the certificate of the server and have imported it into the keystore of the j2ee (using VA). I have imported it to the all current views available. We have SAP PI 7.0 SP18. The problem is that the SSL handshaking is not performed correctly. I have placed a tcp gateway monitor tool to see the messages pass through. As soon as the first message is send to the above URL and a response is received, I get a XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error. Also, in the default trace log I get a no private key found.... Do I need extra steps to configure SSL in the SOAP Receiver? The service does not required a Client authentication certificate and has a certificate with o CA root certificate (since this is only a test system and has issued its own certificate). Any ideas? Any help will be appreciated.
Regards,
S.Socratous

Hello,
Generally it's a connectivity behaviour. Check if you have setup the connection to
the receiver and also check the explanation regarding 500 Internal Server Errors:
*Description: The server encountered an unexpected condition which prevented it from fulfilling the request.
Possible Tips: Have a look into SAP Notes u2013 804124, 807000*
It may be also a problem with the SSL certificate. So, check if it's not expired;
The correct server certificate may be not present in the TrustedCA keystore view of NWA .
Please ensure you have done all the steps described in these url (this is for 7.11):
Security Configuration at Message Level
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/d1c7e690d75430e100000
00a42189b/frameset.htm
You may have not imported the certificate chain in the correct order (Own -> Intermediate -> Root);
Last, if the end point of the SOAP Call(Server) is configured to accept
a client certificate(mandatory), then make sure that it is configured
correctly in the SOAP channel and it is also within validity period.
(This certificate is the one which is sent to Server for Client
authentication)
Hope that helps.
With regards,
Caio Cagnani

Soap Receiver : how to convert application/xml of payload to text/xml?

I get a purchase order xml from SRM with payload as "MainDocument(application/xml)". The receiving system is a Webmethods service that can only accept text/xml. If I try using the testing facility of the runtime workbench (Testing tab under IE under Component monitoring) by pasting my required xml payload, it works because the payload is generated as "PayloadName(text/xml)".
Is there some easy way to change this to "MainDocument(text/xml)"? I am using SOAP receiver adapter and have selected/checked the 'Do not use SOAP envelope', 'Keep Headers' boxes. If I use '&nosoap=true' at the end of the URL, I am getting a 'Unknownservice' exception back from the receiving system.
Thanks

Hi Bhavesh,
thnks for u replies, i have tried this but facing some issues.
If i uncheck option Do not Use SOAP envelope the again it gives me the error "com.sap.aii.af.ra.ms.api.DeliveryException: java.io.IOException: invalid content type for SOAP: TEXT/HTML" in response msg id.
Also u said that there is no need to use bpm, but the flow of my data is first to R/3 where it creates a employee record and then the same data is passed to mdm.

Getting error in SOAP receiver in RWB

Hi Experts,
we have some problem in soap receiver.
scenario name is PROXY TO SOAP.
firewall is open already
WEB service team not able to get the message from PI. wHEN WE MONITOR Receiver soap communication channel we are getting the below error.
Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The message with Action '' cannot be processed at the receiver, due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender and receiver have the same contract and the same binding (including security requirements, e.g. Message, Transport, None)..
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The message with Action ' cannot be processed at the receiver, due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender and receiver have the same contract and the same binding (including security requirements, e.g. Message, Transport, None).
when we load the receiver url(webservice url) we are getting the the xml message.
please help us.
thanks
Elton
Edited by: eltonsaranya on Feb 23, 2012 12:47 PM

Hi Elton,
Most probably you need to type the SOAP Action in the receiver Communication Channel. You can find it in the .wsdl file for your scenario in the following tag:
<wsdl:operation name="SaveShipment">
<wsdl:input wsdl:Action="http://namespace.com/Integration/SomeAction" name="SomeAction"/>
</wsdl:operation>
In this case, you would use the following SOAP Action in your receiver channel: http://namespace.com/Integration/SomeAction.
Hope this helps,
Greg

SOAP receiver monitoring

Similar Messages

Maybe you are looking for