SOAP Request to "XISOAPAdapter/MessageServlet" or"sap/xi/engine?type=entry"
Hi,
I created a webservice whichs creates an idoc from an orders05 xml file.
I created a wsdl file and try it out with xml spy. It works fine.
However I have a question.
If I send the SOAP Request to:
http://host:port/XISOAPAdapter/MessageServlet?channel=PARTY:PARTY_Application:CC_PARTY_Application_SOAP_SND
its working fine.
If I send the SOAP Request to:
http://host:port/sap/xi/engine?type=entry?channel=PARTY:PARTY_Application:CC_PARTY_Application_SOAP_SND
it is not working.
In the second case I can see my message in the monitor and I found my orders05 xml in the payload. However the message has no information about the sender, the application and the communication channel. So I got a lot of errors.
I thought that both are url are doing the same with soap requests, the first is the adapter engine j2ee port and the other the abap stack http port.
Could someone explain the differences to me and why the information is lost when using the abap port?
Many thanks,
Nils Kloth
Hi,
In the 2. case I think there shoudnt be two question marks.
"http://host:port/sap/xi/engine?type=entry?"
Shouldnt it be like this:
"http://host:port/sap/xi/engine?type=entry:"
Hope it helps (Please inform if it works)
Regards,
Arman
Similar Messages
-
Differences between /sap/xi/adapter_plain and /sap/xi/engine
Hello there,
Does anybody know the difference between requesting a webService to "/sap/xi/adapter_plain..." and "/sap/xi/engine..." ?
Thanks very much in advance, Raúl.Hi Raul,
>Does anybody know the difference between requesting >a webService to "/sap/xi/adapter_plain..." >and "/sap/xi/engine..." ?
You wont request a webservice to the above URLs.
sap/xi/adapter_plain, this URL stands for HTTPAdapter on Sender side. So you can send some HTTP request to this URL.
/sap/xi/engine, this is PIPELINE URL of XI server. You can also directly post data to this URL.
Adapters on sender mode post the data to this URL once it forms message in XI format.
Thanks
Gujjeti -
Error while sending a soap request from XML SPY to a webservice in XI
Hi ,
I published a webservice om the XI end and testing it with consuming the WSDL file in XML SPY and sending a soap request from there.
I am getting the following error .
<b>com.sap.aii.af.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name</b>, MessageServlet(Version $Id: //tc/xi/645_VAL_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#4 $)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:380)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Is this error due to the user authentication or due to some other issue .
Please do let me know soon .
Thanks a lot
NikhilHi Ricardo ,
I have the correct port now.
the url looks like
http://<host>:50000/XISOAPAdapter/MessageServlet?channel=:SIEBEL_DEV:SOAP_CUST
when I am testing it in the XML spy. and send a soap server request. I am getting the popup for user authentication . once i put my user id it gives me a error saying
<b>HTTP operation 'POST' could not be performed on URL
'/XISOAPAdapter/MessageServlet?channel=:SIEBEL_DEV:SOAP_CUST&version=3.0&Sender.Service=SIEBEL_DEV&Interface=http%3A%2F%2FOFCOM%2FUNIFY%2FCustomerMaster%5EMI_CUST' due to an error :
The connection to the server was terminated abnormally</b>
Any Idea as to why is such a error is coming
Thanks for the help
Nikhil -
Error when posting a SOAP request
Hi all,
Facing error when posting the SOAP request and after entering the Server Username and password giving error that http not found and url
The URL i follow is http://<hostname>:<port>/XISOAPAdapter/MessageServlet?version=7.0&channel=:BusinessSystem:PI_SOAP_CC
can any one of you tell me in place of XISOAPAdapter what should i place?
Please help me to post the SOAP request to PI server.
Thanks in advance ,
Manohar.Hi ,
copy the same URL (Endpoint that you had given while generating wsdl file) to the browser and chek the status. ( http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel)
See the below URL for the same i.e. SOAP adapter...http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
You should get response something like this '
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#15 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
ModuleProcessorRemote not instantiated
This is make sure that webservice endpoint is given correctly. Don't forget to give username and password for connecting to XI server. user should xiappluser .
Ranjeet Singh. -
SOAP- XI- RFC , while posting soap request thru SPY , getting exception,
Hello friends,
I am trying <b>SOAP->XI->RFC</b> scenario. would like to explain in brief about requirement then <b>let me know if this is correct approach</b>
<i>Our client wants a pull approach from R/3 , for example lets say he wants to get Material Master data from R/3.
So he will send a SOAP request with the material number and r/3 should return back the details.</i>
<b>So we have decided to go with SOAP->XI->RFC approach
That means a sender SOAP Adapter and a receiver RFC adapter,</b>
I have done all the designing, like creating my own DataType,MessagType all interfaces etc.
then i created a Bussiness system of type third party with host name as XI host name to use for sender, and a business system of type Web As ABAP and used one of the R/3 as receiver system.
Doubts: Once i created Soap channel in my sender businees system(where Interface name i gave my Message Interface name and its Namespace), and the receiver channel in my another bussiness system, i created the entire scenario using Configuration Wizard.
NOW THE PROBLEM STARTS.
After clicking Define Web Service , it asks for URL
i gave following url
http://ps3181:50000/XISOAPAdapter/MessageServlet?channel=TPBS_Rohit:soapChannel
TPBS_Rohit is my Sender (third party bussiness system name), and soapChannel is the channel under it.
<b>tell me if this is right</b>
Then in the Message Interface i selected my Message Interface name that i had created in Design for publishing.
<u><b>MAJOR DOUBT</b></u>
<b>It Asks for
Service :
Interface Name :
Interface NameSpace :
what do i give here.</b>
this is what i have given
Service : TPBS_Rohit, Sender (third party bussiness system name)
Interface Name : MI_SOAP <again the same message interface name that i have published earlier>
Interface NameSpace : same namespace.
AM i right ???
I am sure somthing is wrong since when i tried sending a SOAP request using XML SPY , this is what i get.
[code]<?xml version="1.0"?>
<!-- see the documentation -->
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>Exception</code>
<text><![CDATA[
java.lang.Exception: invalid channel (party:service:channel) = TPBS_Rohit:soapChannel
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:498)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>[/code]
Please Let me know where have i gone wrong ?hi manikandan,friends
i changed the url to http://ps3181:50000/XISOAPAdapter/MessageServlet?channel=:TPBS_Rohit:soapChannel
colon included.
but now i get the following error trace in SPY ..
[code]<?xml version="1.0"?>
<!-- see the documentation -->
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>failed to call the adapter engine</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>DeliveryException</code>
<text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:697)
at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process(ModuleLocalLocalObjectImpl3.java:103)
at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:221)
at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process(ModuleProcessorLocalLocalObjectImpl0.java:103)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:543)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: com.sap.aii.messaging.srt.BubbleException: failed to call the adapter engine [null "null"]; nested exception caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE:
at com.sap.aii.af.mp.soap.ejb.AFCallerApplication.perform(AFCallerApplication.java:122)
at com.sap.aii.messaging.srt.ApplicationBubble.onMessage(ApplicationBubble.java:29)
at com.sap.aii.messaging.srt.ExtensionBubble.onMessage(ExtensionBubble.java:56)
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:576)
... 20 more
Caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE:
at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:366)
at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:123)
at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:419)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>[/code] -
XML Spy Error while testing the SOAP request
Hi,
I have generated a webservice from an XI scenario, I am trying to test the webservice through XML Spy.
I am getting the following error when I am sending the SOAP request.
Where do we specify the authentication information (user/pwd) in XML Spy.
It is not even poping any screen to enter username and password.
<b><i>HTTP Error: Could not post the file.</i></b>
http://banglore:50100/XISOAPAdapter/MessageServlet?Version=3.0&Channel=:New_BP:New_BPFileSender&version=3.0&Sender.Service=New_BP&Interface=http%3A%2F%2Fgemsconsult.com%2Ffile2rfc%5EZBP_OUTPUT
Appreciate your quick response
SriniHi,
Try using SOAP client
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9b16d790-0201-0010-4e9b-baa5f42830d8
Thanks,
Prakash -
PI 7.0 - Error HTTP 401 when calling XISOAPAdapter/MessageServlet
Hi experts,
I am trying to call a web service, published from our XI system. (SAP PI 7.0 SP 15).
I generated the Web Service & saved the WSDL successfully from Integration Directory.
The whole scenario is well designed and configured, because it had been working well for some time.
I am using XMLSpy to send a request (something that have been working well) but now, we are unable to log on to the system.
It doesnt matter with which user we try to log on. Its simply not possible. It raises a HTTP 401 ERROR.
The configuration channel SOAP SENDER is configured like this.
- SOAP - SENDER
- Transport Protocol HTTP
- HTTP Security Level : HTTP
- QOF - BEST EFFORT.
Another symptom
when i call the service http://<host>:<50nn00>/XISOAPAdapter/MessageServlet (on DEV system) it doesnt work.
"401 Unauthorized
Cannot authenticate the user.
Details: No details available"
when i call the same service (but on QA system) it works well.
(the calls from XMLSpy work fine, and the interface executes well)
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/xi/NW04S_14_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#1 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
ModuleProcessorRemote not instantiated
I will appreciate if you could give me some advice, which configuration i need to check, or any usefull information.
Thanks!
Cristian.Hi Supriya, thanks for your reply.
I ve tryed with my user, which is not locked, and also with other users, none of them locke. With SAP_ALL and SAP_NEW profiles. And it didnt work.
The url is something like that.
for DEV:
http://myhost:50000/XISOAPAdapter/MessageServlet
for QA:
http://myhost:50200/XISOAPAdapter/MessageServlet
Since DEV and QA instances are on the same server.
Thanks.
Cristian. -
Problems accessing .../XISOAPAdapter/MessageServlet?channel=...
Hi all:
I'm unable to acces to the next URL of my XI server:
http://<server>:<port>/XISOAPAdapter/MessageServlet?channel=<party>:<service>:<channel>
Thank you very much,
Alejandro.Hi Stefan:
Meesage Monitor in XI shows this:
2008-04-08 14:14:12 Success SOAP: request message leaving the adapter (call)
2008-04-08 14:14:12 Success Application attempting to send an XI message synchronously using connection AFW.
2008-04-08 14:14:13 Success Trying to put the message into the call queue.
2008-04-08 14:14:13 Success Message successfully put into the queue.
2008-04-08 14:14:13 Success The message was successfully retrieved from the call queue.
2008-04-08 14:14:13 Success The message status set to DLNG.
2008-04-08 14:14:13 Error Returning synchronous error notification to calling application: Received HTTP response code 400 : bad http request.
2008-04-08 14:14:13 Error Transmitting the message using connection http://xidserver:8000/ sap/xi/engine?type=entry failed, due to: Received HTTP response code 400 : bad http request.
2008-04-08 14:14:13 Error The message status set to FAIL.
2008-04-08 14:14:13 Error Returning to application. Exception: Received HTTP response code 400 : bad http request
Message ID ae8886a1-056d-11dd-989b-001b7899027a
RefToMsg ID
Conversation ID
Sequence Number 0
Message Type Synchronously Sent Message (CALL)
From Party
From Service Name: DragoAP_Produccion
To Party
To Service
Action Namespace http://www.huc.es/xmlns/pruebaslaboratorio Name: OperacionSOAP
Connection Name AFW
Status Failed
Error Category XI_J2EE_MESSAGING_SYSTEM
Error Code CALL_CONSUMER_ERROR
Profile XI
Transport HTTP
Delivery Semantics Best Effort
Times Failed 1
Number of Retries 0
Sent / Received 04/08/2008 14:14:13
Transmitted / Delivered 04/08/2008 14:14:13
Next Delivery 04/08/2008 14:14:13
Persist Until 01/01/1970 01:00:00
Valid Until 04/08/2008 14:19:12
Retry Interval
Address http://xidserver:8000/ sap/xi/engine?type=entry
Credential SAPPasswordCredential(XIAFUSER):password=********:sapclient=100:saplang=
Transport Headers CONTENT-LENGTH=8904 CONTENT-TYPE=multipart/related; boundary=SAP_aea78052-056d-11dd-c00b-001b7899027a_END; type="text/xml"; start="" HTTP=POST
Node ID 1963550
Thanks,
Alejandro. -
There is no payload in Soap request
Hi Expert,
I am testing Soap to RFC scenario. I am firing the soap request using Altova xmlspy. I am getting the response as cannot read payload. I checked in the Moni, no payload is coming to xi. but i am sending data through soap request. Below the response wat i am getting
<?xml version="1.0"?>
<!-- see the documentation -->
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>RecoverableException</code>
<text><![CDATA[
com.sap.aii.af.ra.ms.api.RecoverableException: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:CANNOT_READ_PAYLOAD:
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:919)
at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process(ModuleLocalLocalObjectImpl3.java:103)
at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:258)
at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process(ModuleProcessorLocalLocalObjectImpl0.java:103)
at com.sap.aii.af.mp.soap.web.MessageServlet.callModuleProcessor(MessageServlet.java:167)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:424)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Please help me out in this issue
Thanks,
VenkyHi,
Check whether your payload message which you are passing in HTTP Client tool is correct or not, try to copy the payload from Integration Repository while testing your mapping program.
Also check the Integration Engine Configuration runtime parameters,
Open Transaction SXMB_ADM -> Integration Engine Configuration -> Change Specific Configuration
Check the values of below given parameters for runtime category, these values must be maintained:
LOGGING, LOGGING_SYNC, LOGGING_PROPAGATION, TRACE_LEVEL and TRACE_LEVEL_PROPAGATION.
Look into this thread ... it seems something similar with your problem.
Payload of SOAP-Message cannot be read Try these solutions.
Regards
Aashish Sinha -
Dear XI Expertise,
I am doing a scenario on SOAP>XI>System.....
First thing my SOAP Adapter is not enabled when I see in the RWB-->Adapter Monitoring
For this I searched the forum and followed almost all the blogs.......but could not find a solution......
Especially in one blog thread I found one person has faced & been solved the same problem which I am facing. But for me it is not working......
Here is the URL for that one...
how can i enable SOAP Adapter?
"In almost all the blogs, I found a solution given by some experts that when we send our first SOAP message, it will be automatically activated". But for me this is also not working.........
I designed and configured my scenario in IR & ID and created a WSDL file for my outbound interface. Actually I created outbound interface from external definition (WSDL) which I got from EP side.....
I used XML spy and created a "new SOAP request" from WSDL file which I generated from ID and given proper input in that message and sent the request.
When I sent the request I got the following error message(dialog box)....
HTTP error could not POST File
/XlSOAPAdapter/MessageServlet?channel=:LEGACYSYS_PRA_BS:WS_Sender&version=3.O&Sender.Service=LEGACYSYS_PRA_BS&lnterIace=ns%3%2F%2Ffx.com%2Farchana%2Fwstorfc%5EPR_Out_MI on server bcone-prd'(500).
when I click ok, In the next dialog box I got this message
"Error sending the SOAP data"
Please help me out............
Advance Thanks
Praveen GujjetiPraveen ,
May I suggest a workaround till your SOAP adapter issue is not reolved?
There are 2 URL's to which a SOAP message can be posted.
1. You post it to the Adaptee Engine and the SOAP adapter then sends it to the Integration Engine.
2. You post the message to the Integration Engine directly.
The url you are now using is pointing to 1.
Recreate the WSDL with the following URL-->
<b>http://<server>:<ABAP-port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=<YourService>&Interface=<YourNamespace>%5E<YourInterface></b>
Click on Propose URL while defining the WSDL. More is on this blog,
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
Let me know if it solves the problem partially?
Regards,
Bhavesh -
Error in using XI-SOAP adapter, but no error with SAP-BC
Hi,
I am working on RFC->XI->Webmethod (.asp) scenatio.
I am using SOAP adapter.
Whin I am not using "Do not use SOAP Envelop".
I am getting "com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML" Error in SXMB_MONI.
But when I am using "Do not use SOAP Envelop" then I am not getting any error. in SXMB_MONI status showing Successfully Processed. But the responce i am getting is "You are not authorized to view this page // HTTP 401.1 - Unauthorized: Logon Failed"
But same web-service is working fine while connected with SAP-BC.
Please Help why scenario is working with BC, but not with XI.
Thanks & RegardsHi Bhavesh,
Thanks for reply.
I am getting all success in message monitoring, but still web-services sying they are not getting any message.
I am attaching all 4 logs for one synchronous communication of message monitoring.
I am not able to understand where message going and why XI showing success every where.
********1st(Sent Messages)
Success SOAP: response message leaving the adapter
Success Application attempting to send an XI message asynchronously using connection AFW.
Success Trying to put the message into the send queue.
Success The response message for message cf4fd921-4a74-11db-9312-001279933263(INBOUND) was successfully transmitted to the calling application.
Success The message status set to DLVD.
Success The application sent the message asynchronously using connection AFW. Returning to application.
********2nd (Sent Messages)
Success RFC adapter received sRFC for Z_PA_SAP_TO_Webservice from D02/230. Attempting to send message synchronously
Success Application attempting to send an XI message synchronously using connection AFW.
Success Trying to put the message into the call queue.
Success Message successfully put into the queue.
Success The message was successfully retrieved from the call queue.
Success The message status set to DLNG.
Success The message was successfully transmitted to endpoint http://XYZ.com:8000/sap/xi/engine?type=entry using connection AFW.
Success The application sent the message synchronously using connection AFW. Returning to application.
Success The message status set to DLVD
**********3rd (Received Messages)
Success Using connection AFW. Trying to put the message into the receive queue.
Success The XI response message for message d0372be1-4a74-11db-91d7-001279933263(INBOUND) was successfully returned to the calling application.
Success The message status set to DLVD.
**********4th (Received Messages)
Success The message was successfully received by the messaging system. Profile: XI URL: http://XYZ.com:50000/MessagingSystem/receive/AFW/XI
Success Using connection AFW. Trying to put the message into the request queue.
Success Message successfully put into the queue.
Success The message was successfully retrieved from the request queue.
Success The message status set to DLNG.
Success Delivering to channel: IF_O_502_WebserviceBusService_SOAP_In_02
Success SOAP: request message entering the adapter
Success SOAP: completed the processing
Success SOAP: response message received d0372be1-4a74-11db-91d7-001279933263
Success The message status set to DLVD.
Success The message was successfully delivered to the application using connection AFW. -
Error while sending SOAP Request to server through XML Spy
i have created a webservice to jdbc scenario application and when i tried to check my webservice with XML Spy by giving inputs to wsdl file as SOAP Request to server, its showing the error like this:
<b><u>Http error : could not POST File</u></b>
It would be good if u explain step by step procedure how to solve the issue.
Thanks & Regards.,
Pushparaju.BThis is the error showing after clicking OK button after it showed the error
Http error : could not POST File
<b><?xml version="1.0"?>
<!-- see the documentation -->
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>DeliveryException</code>
<text><![CDATA[
com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:PL_TIMEOUT:
at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:451)
at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:125)
at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:831)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope></b>
yes i have the role of XIAPPLUSER
scenario has created by me and i have the authorization to enter into XI -
Sending SOAP request from XI and writing a scheduler for this
Dear XI Experts,
My scenario is as follows.
We have two landscapes
1) XI, R/3
2) Client System(Remote, Other than SAP)
Now we have to pull the data from client system using WSDL (There will be one method for pulling the data in the WSDL file). The WSDL is provided by the client. We are importing that WSDL as external definition in Integration Repository and implementing the scenario SOAP to XI to RFC and configuring it Integration Directory.
Remember the client will not send the data to XI. Only we have to pull the data as mentioned above.
Problems:-
(i) How to send SOAP request to the client using XI only?
(ii) How to write a scheduler for this?
please help us.
Thanks...
Praveen GujjetiUr Suggestion
"My proposition looks like that. in R/3 you have scheduled RFC call in some program. This RFC calls XI and XI is calling using SOAP adapter your client. Then response go back to your RFC and you can handle this data."
As you mentioned, I am not scheduling any RFC call in R/3. If you go through my first query u can find two points where I am having some doubts......
How to send SOAP request to the client using XI only? Is it possible to send a SOAP request from XI?
If so,
(ii) How to write a scheduler for this? So that it will invoke the webservice and get the data from client application(system) -
Error 401 while sending SOAP Request to XI
hi friend ..
i am getting Error 401 while sending SOAP Request to XI..
can u suggest me where may be the error?
thanks..Hi,
Refer these threads:
Testing XI SOAP scenario via XMLSpy
Re: SOAP Sender ADAPTER 401 No Authorisation
Re: XI Web Service - Code: (401) Unauthorized.
Try soap client https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9b16d790-0201-0010-4e9b-baa5f42830d8
Regards
Suraj -
Web Service posting via SOAP.request - Security settings prevent access...
I'm trying to call a web service via the SOAP.request object in javascript embedded into my Interactive Form. I've successfully done this with SAP NetWeaver 7.0 trial version however now I'm having this issue on a production setup. The PDF generates fine and I can fill out the form and everything. I checked the properties of both PDF documents (one that works from the trial and one that doesn't from the prod box) and they are the same, expect the one that works is PDF Version 1.6, and the one that doesn't is PDF Version 1.7.
Here's the client-side error:
Acrobat EScript Built-in Functions Version 8.0
Acrobat Annotations / Collaboration Built-in Functions Version 8.0
Acrobat Annotations / Collaboration Built-in Wizard Functions Version 8.0
Acrobat Multimedia Version 8.0
Acrobat SOAP 8.0
NotAllowedError: Security settings prevent access to this property or method.
SOAP.request:31:XFA:data[0]:mainform[0]:btnRelease[0]:click
Here's the snippet of JavaScript code:
var response = SOAP.request();
Here are the security properties of the malfunctioning PDF:
Security Method: No Security
Can be Opened By: All versions of Acrobat
Printing: Allowed
Document Assembly: Not Allowed
Content Copying: Allowed
Content Copying for Accessibility: Allowed
Page Extraction: Not Allowed
Commenting: Allowed
Filling of form fields: Allowed
Signing: Allowed
Creation of Template Pages: Allowed
How do I determine what the culprit is?Michael,
PDF Version 1.6 means Adobe Reader 7.0.x family and PDF version 1.7 means Adobe Reader 8.0.x or 9.0.x if I am not wrong.
Also if you check LiveCycle Designer Help (Using LiveCycle Designer ES > Working with Data Sources > About data sources > Working with data connections) it clearly says that with LiveCycle Designer 8.0 secured web services are not supported and there are additional security settings for Reader 8.0 onwards, that may be causing the issue.
Chintan
Maybe you are looking for
-
When I try to run iPhoto it doesn't start and all I get is the pinwheel. I am running lion and I notice that the window is not on my primary window (I can see a corner of the iPhoto window). When I force quit I get the following report (1st 50 or s
-
Global swap is not reflected in branded solaris 8 zone
I have 32 GB in my global zone root@Z21-AP-02 # swap -s total: 5753912k bytes allocated + 511136k reserved = 6265048k used, 32257984k available when I look in my branded solaris 8 zone I see a much smaller value root@txpwrsrv07-2:/ # swap -s total: 3
-
Hi all, I have a requirement where i need to modify the VF44 program to add additional fields for selection with ALV output and it has options to filter and sort, which can be used as information to process the transaction. Functionally,this requirem
-
Assigning the library to a report in report painter
Hi All, I have developed a new Z report in report painter by copying from an existing report called 3CST6. (Actual/Plan/Variances Proj + Responsible). But I would like to know to which library this report belongs to. (As this information is needed du
-
My MBP's got hiccups, but drank no w(h)ine
A strange hiccups sound comes out of my new MacBook Pro irregularly but it is not output by the speakers (I can hear it even when the sound settings are set to 'off'). The MBP has the hiccups running Mac OS as well as running Windows. The hiccups sou