SOAP - RFC

hi friends,
i am doing a scenario sync soap sender to rfc receiver
i created DT,MT,MI,MM in IR and also configuration part,which is correct.
when execute this scenario i am getting mapping error..i think my message is not send by soap sender thatswhy i am geeting mapping error.
ho wto solve problems with SOAP sender....ho wwe can check.
Regards,SARAN

Hi SriNivas rao
Any How-to guides available for SOAP adapters setup ?
Check this, exactly what you want,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
Check this weblog for reference...
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
Check this thread discuss the same
SOAP Sender - XI - RFC
Thanks!!

Similar Messages

File Soap Rfc

In my scnario file soap rfc i have used BPM.Even though the file is not picking up & its not calling webservices.Basically my requirement is i need to send a file which has to call webservice and the response has to get back to rfc.i am tring to work on this weblogs
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
I am able to get response for rfc to soap,but i want to work on a scenario file-soap-rfc and the response has to come to file.
Can any one please help me out.
Thanks
sriram

Thanks moorthy for your response
I have already configured receiver determination from file to bpm,even i bpm after sync step i have taken asyn
step..
In adapter Framework
Channelscn8_OB Sender Adapter v2727 for Party '', Service 'DEV_Integration_Server':
Configured at 2006-05-11 10:56:36 GMT-07:00
History:
- 2006-05-11 11:08:37 GMT-07:00: Polling interval started. Length: 60.000 s
- 2006-05-11 11:08:37 GMT-07:00: Processing finished successfully
- 2006-05-11 11:08:36 GMT-07:00: Processing started
- 2006-05-11 11:07:37 GMT-07:00: Polling interval started. Length: 60.000 s
- 2006-05-11 11:07:37 GMT-07:00: Processing finished successfully
But the file is not picked from directory
But i could not see any response from soap adapter,
Thanks
sriram

ERROR During call of SOAP with a SOAP- RFC- SOAP Synchronous scenario

Hello Experts,
I've recently created a SOAP->RFC->SOAP synchronous scenario but every time I'm invoking the SOAP via XMLSpy then i will hang and send a timeout error. Also a log in XI was generated as shown below.
I hope you could help me on this one.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          28.09.2010 09:31:23
Short text
     SQL error in the database when accessing a table.
What happened?
     The database system detected a deadlock and avoided it by rolling back
     your transaction.
What can you do?
     If possible (and necessary), repeat the last database transaction in the
      hope that locking the object will not result in another deadlock.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in
     procedure "DELETE_LUW_PACKET" "(FORM)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The database system recognized that your last operation on the database
     would have led to a deadlock.
     Therefore, your transaction was rolled back
     to avoid this.
     ORACLE always terminates any transaction that would result in deadlock.
     The other transactions involved in this potential deadlock
     are not affected by the termination.
Regards,
Alfred

Normally such an error comes when the DB of SAP PI is full.
Contact your BASIS or ADMIN team and ask them to free the DB space.
Regards,
Abhishek.

Payload not visible in cc monitoring for SOAP-RFC synchronous AAE scenario

Hello consultants,
I have a synchronous SOAP-RFC scenario over the AAE (Java only). When I test the service in WSNAVIGATOR the response message contains an error that results in the error message:
"<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>ADAPTER.JAVA_EXCEPTION</code>
 <text><![CDATA[
java.io.IOException: Parsing Error: org.xml.sax.SAXParseException: The processing instruction target matching "[xX][mM][lL]" is not allowed." the same errror is present in communication channel monitoring for the SOAP adapter.
The status in message monitoring however is succesful.
Is it possible to check the payload for the response message of the RFC call. In CC monitoring I cannot access the payload, it is not there. It does not have to be in cc monitoring, anywhere would be fine.
Since this is an AAE scenario there are no messages in SXMB_MONI.
All tips are appreciated.
Peter Jonker

Hello!
Please set the "messaging.syncMessageRemover.removeBody" parameter to "false", on the SAP XI AF Messaging Service. Use the help page below for more information.
Properties Related to the Messaging System:
http://help.sap.com/saphelp_nw04s/helpdata/EN/59/25ee41c334c717e10000000a155106/frameset.htm
Best regards,
Lucas Santos

SOAP service /sap/bc/soap/rfc/sap does not exist

Hi!
I implement ABAP-Proxy to SOAP scenario.
For the receiver communication channel (SOAP Adapter) I need to put target-URL
http://<server>:8000/sap/bc/soap/rfc/sap/BAPI_MATERIAL_EXISTENCECHECK?sap-client=200.
Unfortunately the URL cannot be displayed in brwoser.
I also could not detect the appropriate SICF service sap/bc/soap/rfc/sap under tcode SICF.
Can some one help me to solve this problem?
Thank you very much!
regards
Holger

Hi!
What is the difference between the both URL's?
http://<server>:8000/sap/bc/soap/wsdl11?services=BAPI_NAME&sap-client=200
http://<server>:8000/sap/bc/soap/rfc/sap/BAPI_MATERIAL_EXISTENCECHECK?sap-client=200.
Thank you!
regards
Holger

SICF - HTTP 500 Error when testing SOAP RFC Service for XML load into BW

I am trying to load a XML file into BW w/o XI. So there is no source system as such. I followed the 'How to guide on loading XML to BW. I am on BW 3.5. I went to
transaction SICF>default_host/sap/bc/soap/rfc
I did a RMC and selected Test Service. A browser window open like it is trying to connect to the BW system, but I see the HTTP 500 - Internal Server Error.
What is causing this? All services are appearing as Active (grayed out). I am basically trying to put the XML file into the BW delta queue. The BW data source have been created and ther is a green entry in RSA7.
Thanks in advance.

Dinesh,
My question was more reagrding one of the steps that is not working i.e. testing for webservice. I am aware of the datasource etc.
Hence, still looking for help on what could be the causes of my error as described in the original message above.
Thanks!

SOAP - RFC possible with Direct Connection?

On our PI 7.1 system we have a RFC which we want to expose as a webservice with all the standard monitoring SAP PI provides. On PI 7.0 is used to create a configuration scenario in Integration Builder and generate a WSDL.
I have read the document 'Configuring Web Service Scenarios', but it is not clear to me if i can create a AS JAVA 7.1 -> AS ABAP 7.1 scenario and if the 'Direct Connection'-functionality of SAP PI 7.1 offers me a solution.
Please advise me...

Hi,
in PI7.1 direct connection uses WS adapter which works on WS-RM protocol.............your req is to expose RFC as web-service which do not work on WS-RM protocol and moreover you will require RFC adapter for configuration of your scenario.... So SOAP->RFC is not possible with Direct connection in PI7.1.
Regards,
Rajeev Gupta

SOAP- RFC- FTP Scenario

Hi experts,
Could you please show me the link which guides to create a scenario such as: request sent from SOAP client to XI server to get data from an ECC system, then the response will be sent to FTP server as file.
Thanks in advance

Hi,
RFC -> XI -> WebService - A Complete Walkthrough
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
SOAP-RFC-WEBSERVICE
SOAP-RFC-WEBSERVICE

SOAP-RFC-WEBSERVICE

Hai All,
Please tell me how to do the following scenario in xi.
SOAP-RFC
1. sending soap request
2.Mapping soap request to rfc request
3.Mapping rfc response to a webservice request.
4. Mapping webservice response to soap response.
>>> Is it necessary to use bpm in this case... If yes, please tell me how to do this scenario in bpm.
Message was edited by:
SRI KRISHNA CHARAN

Thanks for your reply.....,
Yes i am able to get the wsdl file as external def in IR...
But my problem is...
lets take the scenario...
SOAP(Sync)-RFC(Sync)-JDBC(Sync)
1. Receiving soap request.
2. Mapping soap request to rfc request.
3. Mapping rfc response to jdbc request.
4. Mapping jdbc response to soap response.
5. Sending soap response.
Please tell me how can i desing and configure this scenario.
Thanks & Regards,
Sri Krishna Charan

SOAP - RFC - SOAP

Hi,
I want to achieve the following:
Have a sender SOAP adapter configuration with the following functionality:
Expose a web method of the form
string Method( string request )
In other words, I want to receive a 'request' as a string using a sender SOAP adapter, call the 'Method' in the form of an RFC enabled Function module on R3 returning a string . The response I want to send back as response to the original request.
Is this possible without an elaborate integration process or will I have to do a Synchronous / Asynchronous bridge type interface ?.
Some guidelines / references will be greatly appreciated.
Thanks
Andre

Hi,
You can do it without BPM.
SOAP (sync) <-> XI <-> RFC(sync)
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Regards
Suraj
Message was edited by: S.R.Suraj

File- rfc- soap- rfc

Hi
I have a scenario File to rfc it has to update the rfc table & the same file request has to call soap after updating the rfc table & the response from soap has to update rfc again....
I have designed bpm
1)Receive step asyc to receive the file
2)Send step aschyronus to update the rfc
3)Send step sychronous to call the soap
4)Transformation step to convert soap response to rfc input.
5)Send step aschyronous to update the rfc..
Do i need to use S/A bridge in my scenario...
Can any one you please breif me what steps are going to involve in bpm & Coresponding Message mappings & the interfcae mapping.
Any responses would be greatly appreciated...
I have seen all the related weblogs...
Thanks
ram

Hi,
The step are good if you don't need to see whether the uopdate has happened in RFC and based on that you want to go ahead.
1)Receive step asyc to receive the file
MI- Oubound async
MI- Abstract async1
2)Send step aschyronus to update the rfc
MI-Abstract async1 (send step will be async)
The above is if the data structure requred to be sent to RFC is same as in Abstract async1 else do a transformation from MI-Abstract asyn1 to abstract async2
3)Send step sychronous to call the soap
Here also if the metadata is not same as that of MI abstract1 then transformation step to move data to abstract sync3 (you need to have two message Interface here request response
4)Transformation step to convert soap response to rfc input.
response of the soap will be the input and output would be another MI for file metadata
5)Send step aschyronous to update the rfc..
MI for file metadata in previous step.
6. MI -Inbound async to pass from IP to the service you are using.
Hope this helps.
Regards
Vijaya

Which is better XI 3.0 or PI 7.1 for SOAP- RFC scenario.

Hi All,
I have to Create SOAP to RFC Sync Scenario.
I know PI 7.1 is advance. So there must be a edge over XI3.0.
Is is better to use PI7.0 insted of Xi 3.0 for this?
then Why?

Hi,
this blog might be interesting:
http://www.sdn.sap.com/irj/scn/index;jsessionid=%28J2EE3417500%29ID0033175050DB10487845846410196322End?rid=/library/uuid/504da602-3bac-2c10-f5a3-bcfa6587d47b
For example it says:
> Further connectivity options are provided on the AAE, such as XI message protocol using the SOAP adapter: For example, this > permits fast access to ABAP backend systems based on the proxy technology.
Regards
Patrick

NO_MAPPINGPROGRAM_FOUND SOAP RFC Adapter

Folks...
Fun new problem.
Details Are:
--SOAP Sender Adapter to RFC Receiver Adapter
--Synchronous Call
--Appears to Complete all steps of the pipeline except the Response Message
--Mappings for both Request and Response Messages have been declared.
The error is as follows.
If anyone can point me to a log file to debug this problem that would be great.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>http://test.tsopetro.com SOAP_To_RFC</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to determine name of mapping program</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Many Thanks,
J-

More Info...
Here more info from the SOAP Message
It appears that it begins to try to Map the Response, and just dies....
I tried to update the cache, and I re-activated all objects to see if this cleared out the error to no avail.
Is there some way to tell what Mapping it is looking for?
Maybe my namespace is off...
SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="end" host="<servername>">20050511224747.81</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_RESPONSE</SAP:Name>
<SAP:Timestamp type="begin" host="<servername>">20050511224747.998</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="<servername>">20050511224748.202</SAP:Timestamp>
</SAP:RunTimeItem>
also I included <servername> in the message for security reasons.... This element is pointing to the right server...
Thanks,
J-

XI Webservice scenario SOAP - RFC Call

Hi,
i have the following scenario: Request --> XI RFC-call --> R/3
 XI --> Response
First I have test this scenario with the HTTP-request and it works (the result was correct). After this I changed the configuration and test the scenario with the SOAP-request. But when I try this scenario, the rfc call works also, but I get the response, that we send empty request parameter (I_EQUIPMENT).
SOAP Request:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
 <soapenv:Header/>
 <soapenv:Body>
 <ns0:RFC_GET_EQUIPMENT_DATA>
 <I_EQUIPMENT>xxxxx</I_EQUIPMENT>
 </ns0:RFC_GET_EQUIPMENT_DATA>
 </soapenv:Body>
</soapenv:Envelope>
HTTP Request:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:RFC_GET_EQUIPMENT_DATA xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
 <I_EQUIPMENT>xxxxx</I_EQUIPMENT>
</ns0:RFC_GET_EQUIPMENT_DATA>
Thanks for helping,
Markus

Hi,
I hope following docs will help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
Thanks,
Tuhin

Soap-rfc-file:how to start

hi frens,
I need to do a scenario in which the request will be coming from EP and the rfc response has to be posted as a file in FTP folder.this file will be an input to another system which is out of the scope of XI.This system will again post a file in FTP folder and another rfc will pick it and the response of rfc is given to EP.
do i need a BPM for this or can i do it in any other way??If BPM required what are the steps
thanks,
Nisheeta

Hi,
While all this is happening, the webservice that sent the request would need to wait until it gets its response right?
You wouldn't be able to achieve this without a bpm.
However, in case, the webservice request is asynchronous(which is most probably not the case) you could go ahead with the design you suggested, since the source, need not as such, wait for a response.. and you could create a new file-rfc-soap scenario which would send back a response to a webservice, with a separate sender agreement.
Regards,
Smitha.

SOAP--- RFC best design

Hi Experts,
I have developed SOAPu2014> RFC scenario synchronous and I have used sender side SOAP adapter receiver side RFC adapter, it is working fine.
But I am thinking to go with best design, I know if I replace RFC adapter with ABAP Proxy, performance will be good, but in my case due to some limitation I canu2019t go with ABAP proxy.
Nest alternative is;
1) Going with Advanced adapter engine, I am on PI7.1 EHP1, so I can go with that. But I canu2019t see messages in MONI, due to this, no AAE.
2) Sending message directly to IE using SOAP adapter XI3.0 as message protocol, but I am not sure about this concept, can any one put some light on this.like any chnages required in WSDL.
If any one has inputs pls share with me.
Regards,
Jam

1) Going with Advanced adapter engine, I am on PI7.1 EHP1, so I can go with that. But I canu2019t see messages in MONI, due to
this, no AAE.
using this you should be able to achieve a better level of monitoring/ logging: /people/michal.krawczyk2/blog/2010/04/28/pixi-target-message-logging-with-local-aae-not-possible-not-anymore (not for mapping errors)
2) Sending message directly to IE using SOAP adapter XI3.0 as message protocol, but I am not sure about this concept, can any one put some light on this.like any chnages required in WSDL.
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
Regards,
Abhishek.

SOAP - RFC

Similar Messages

Maybe you are looking for