SOAP to IDOC needs Response
Hi Team,
We had a scenario SOAP to IDoc using some XSLT MAppings.
We configured teh scenario, but where as client needs response, since IDOC does not have response, client needs the response from PI to the same SOAP Application as response.
for this do we need to use ccBPM Sync u2013 Async bridge. Can any one guide how to achive this using ccBPM Sync u2013 Async bridge, Is there any other way to achive this with out BPM.
Thanks & Regards,
Sriram
Hi Sriram,
Soap to IDOc, it's really an interesting scenario.Please try it once like this:
Once I have worked with RFC to JDBC were RFC needs response but through JDBC we were not giving any response.So did an EOIO processing:
Step 1>
RFC to JDBC
RFC to FILE
Here,if RFC to JDBC is successful then generate a File.
Step 2>
FILE to RFC
After File generation send the response to RFC.
But here both RFC's were different.
I am not sure, how in SOAP it can be done because not worked in such scenario.But I hope it can be one of the approach.Just try once and let me know.
Regards,
Nutan
Similar Messages
-
SOAP to IDoc scenario without BPM
Hi,
I have 2 scenario's
1) IDoc-SOAP - -response -- IDoc scenario -- (have found some links to do it without BPM)
2) SOAP -- RFC request -- RFC response -- e-mail (no links found)
how can i achive both these scenario's without BPM. Currently i have these 2 scenarios in our 7.1 version with BPM. but our requirement is to migrate this scenario into 7.4 without BPM(No PO).
please help us to achive this scenario without BPM.
Your help is highly appreciated.
thanks,
PraveenHi Kiran,
Could you please let us know the exact requirement. How do you want to send the response back to IDOC?
ASync - Sync Bridge with IDOC sender is not possible in PI 7.0.
If It is something like IDOC --> SOAP --> IDOC , And If the SOAP request is small then you can use SOAP Lookup in IDOC to IDOC Scenario.
In The mapping You can do a lookup and get the response from SOAP(Webservice) and map that to your Target IDOC.
This is one possible way for you without BPM in PI7.0.
Please let me know if you need more details about this.
Thanks
Jyothi A -
BMP Correlations (SOAP-XI-IDOC)
Hi,
I have a scenario like this, SOAP-XI-IDOC. I'm using a BMP to:
1- Receive the SOAP request and I'm using a S/A Bridge,
2- Map SAOP request to an Idoc
3- Send the Idoc to SAP
4- Close S/A Bridge
So step 1,2 and 3 are working.
Now, In my SOAP message I get "Pipeline timeout condition satisfied". I did increase the "CHECK_FOR_ASYNC_RESPONSE_TIMEOUT" setting but still getting it.
I think the problem is that the BMP is never ending the process and I'm not to sure why. I'm not using any correlations in my scenario, would this solve my problem? Is it required? What else could be the problem?
How can I debug this to see where is it broken?
My next step, if I can get the first part working, I would like to have my BMP wait for a ALEAUD back from R/3 and mapping this to the SOAP request. ANy idea how to do this part?
Rgds,
YvesHi,
I'm sure somebody did this.
Still not able to read the Ack back from R/3 to my BPM. I get the ALEAUD back to XI but I get:
No object type found for this message; check the activation of the corresponding process
When I look at SXMB_MONI_BPE I can see that my workflow is waiting for the response back from R/3.
How can I read the ALEAUD back in my BPM?
I still think I need some correlations but not sure. I did create a correlation between the outbound Idoc from Xi to R/3 (/MBGMCR02/IDOC/EDI_DC40/DOCNUM) to my Inbound Idoc (/ALEAUD01/IDOC/E1ADHDR/E1STATE/DOCNUM) but it's not working. So, is it possible to get back the ALEAUD in a BPM?
And if yes, is it possible to map the ALEAUD to the response back of my SOAP message (response)?
I did look at some forums about looking at table IDXRCVPOR to get the original IDoc number back but I'm not to sure how this would help me. For me, the Idoc number in (/MBGMCR02/IDOC/EDI_DC40/DOCNUM) and (/ALEAUD01/IDOC/E1ADHDR/E1STATE/DOCNUM) should be the same. Right?
Rgds,
Yves -
SOAP to IDOC with or with out BPM
Hello All,
I am doing a SOAP to IDOC scenario for which I want to know if I need to create anything in SLD(like products, software components etc). Also can any one brief me on what all steps I need to do in SLD, IR, & ID.
For this scenario do I need to use BPM or not. And do I need to use 'with party' or 'with out party' to create a business service.
I need this urgently so can anyone throw some light on this.
Regards,
NeelimaHi ,
Posting IDOCS in SAP application system follwing are the steps you have to take.
Steps (for idoc reciever part)
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
In Transaction SALE
Define and Assign the logical system name.
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
For SOAP sender part :
You have to import ...WSDL as external defintion ...in repository ..
you have to select appropriate actions for ...request and response. -
Hi All,
My requirement is SOAP to IDOC Async scenario.SOAP is sender Legacy system.
Is it possible to send a response back to sender after reaching the data to SAP PI server without BPM?
If possible , please give me a step by step guide link.
Thanks,
ArthitaHi Arthita
If you do a search on SCN, you should be able to find some blogs on Sync-Async bridge without BPM. Below are a few examples:
This is an official SAP guide
AsyncSync & SyncAsync Bridge without BPM
This is part 1 of a series of blogs related to bridges.
Bridges Construction Site (1/3): Asynchronous - synchronous bridge.
For your case, because the receiver is IDoc which is asynchronous, you will need to design an asynchronous response back from the ECC system which you can then channel back to your SOAP response.
Rgds
Eng Swee -
How to send status message in SOAP to IDOC scenerio without BPM
Hi,
I have a SOAP to IDOC scenerio in which we require to send the status message back to user from XI that " IDOC has been sent successfully to SAP system"
We do not want to use BPM bacause of performance issues.
Can you please help me how to achieve this synchronous response without BPM.
Note: We require the status message from XI that the IDOC has been successfully posted to WESAP systemIdoc only support async behaviour. U can't get the Idoc response as per ur requirement without BPM.
Better to go for abap proxy or RFC.
Or u may get the ack till XI.
Regards,
Prateek -
Problem in SOAP to IDOC & File scenario
Hi,
My scenario is SOAP ->IDOC and FILE,when I run the scenario IDOc was processed and File was not created at the target system.I maintained LS name for sender SOAP and IDOC business service.Nothing was maintained in adapter spec identifiers for Recer business service(i.e For target File CC).This was working fine in Dev.After Importing another scenario which uses same business service,this didnt stp working?
what could be the reason?
Thanks,
RP
Edited by: RP@261 on Oct 21, 2008 10:59 PM> my imported scenario and existing scenario in QA using same sender business service.After importing the other scenario,existing scenario is failed to create files at target system even though it shows successful in MONI.
>
Check the target dir permission once again from your BASIS team. Reconfirm the the target dir name in receiver CC also.
> Should we maintain Logical system in adapter specific identifiers for Recr File CC also??? I create a file in BI application server from recr File CC.
>
No, for creating a file you don't require this. This is required only in case of IDOC.
> my scenario is
> (SOAP sender) --> TO IDOC & FILE ..i maintained LS name in sender BS where SOAP CC is created and also at Recr BS where IDoc CC is created. The other Recr BS for File where I didn't.IS it required ?
>
For File recever BS, No need. -
BAPI to SOAP scenario - query for response as table
This is for BAPI to SOAP scenario. We need response as TABLE(multiple values,like arraylist/resultset in java) , not as single valued items.
.net method is ->Y_Vct(string CoCode,string Role, ref A_BTable) -
Request:
CoCode -Optional, if empty string is passed all companies will be fetched by the function
Role - Optional, if empty string is passed all the roles will be fetched by the function
Response:
A_B- returns set of records(Multiple) based on the parameters passed
BAPI is - Y_Vct
How to get response from table of multiple values .
like 10 records as response for 1 request.
thanks.Hi Jha,
Which version of PI you are using? If you are uisng 7.1 then you can return the multiple values.
Regards,
---Satish -
Hello All,
I have a scenario where the sender system is outside our landscape and I need to post the PO data to SAP system using XI. I know its a SOAP to IDOC scenario but I am not given a wsdl but am given only a xsd and one XML as input. Can I use this XSD to create a sender message interface or is there any way I can convert the XSD to WSDL? Also, where should I give the path of the XML file in sender SOAP adapter?
And also I have to create a value mapping table where I have almost 4000 entries. Can any one let me know on how to create this?
I have browsed thru the SDN but havent found any information that I am looking for. Can anyone please help me on this.
I will be greatful if anyone can help me with Step by Step to SOAP to IDOC scenario.
Thanks and regards,
NeelimaI think what is this person asked to do is build an integration scenario using two business system
1. A business system understand web service technologies and also have a data definition they would like to use to communicate data with their business partner.
2. A business system which like to accept DATA in the format of IDOC.
So As long as we use XI as an integration framework, this is called SOAP to IDOC scenario.
I recomend to use the following steps to implement the integration need.
1. Understand the XSD data structure from the external service provider.
2. Using the external data definition create and outbound interface either SYNC or ASYNC format ( You have to discuss this with service provider for confirmation) in XI.
3. External service provider can use this outbound interface definition and associated data structure to send their data in their provided XML format to XI integration server.
4. Create an inbound service definition by using the XSD structure created for the IDOC you like to use.
5. XI integration server can use the inbound interface definition to pass the outbound interface message received once the outbound and inbound interface are connected using a configured scenario.
6. Using the outbound message type and inbound message type create a message mapping.
7. Using the message mapping create an interface mapping between outbound and inbound interface.
8. Create a WSDL from the outbound interface so that the service provider can use the service contract defined by the outbound interface in a web service enabled business system (Note: you have provided the data requirement in XSD format indicate that your business system is web service enabled). Make sure you are not getting fooled by the concept propose URL for the WSDL. You must provide the URL end point in created WSDL according to the following format.
http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet?
channel=<party>:<service>:<channel>
If the SOAP adapter channel belongs to a service without party, the address is as
follows:
http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet?
channel=:<service>:<channel>
9. Provide the WSDL to the service provider, ask them to use that WSDL to send data to your integration framework.
10. Configure the SOAP adaptor in sender mode, so that it can act as a end point to receive the XML data based on the XSD defined in the WSDL and convert the same to an XI document.
11. When u define the sender soap adaptor make sure you have selected the namespace and interface name same as the one you created for outbound interface.
Also recomend to read two How to guide related to web service and soap adaptor to complete your scenario.
Thanks -
SOAP to IDOC and then send back acknowledgement
Hi All
I have SOAP to IDOC scenario which is successfully working.
Now the requirement is SOAP needs an accknowledgement that IDOC is successfully posted.
What are the ways to achieve this, please help.
Regards
Dheeraj Kumarhi,
point no 1. as Grzegorz explanied with examples:
http://wiki.sdn.sap.com/wiki/display/ABAP/HandlingIdocAcknowledgements
but it's better to use a custom idoc in this case (approach No 2.)
why ?
as standard IDOC for ack can be used in PI for message acknowledgment and you may need it in the future
so it's better to copy the standard one into a custom on and use it for your SOAP scenario only
and not mix with the srandard one - at least that's what I'd do
in my book:
http://www.sap-press.com/products/Mastering-IDoc-Business-Scenarios-with-SAP-NetWeaver-PI.html
you can also find out with screenshots how to work with IDOCs and IDOC acknowledgments
Regards,
Michal Krawczyk -
Inbound SOAP for IDoc : Register Service
Hi ,
We have a requirement where we need to post an Inbound IDoc in the R3 from a Web Service that is called from a 3rd party application, I found something in the Transaction
SALE->Basic Settings-> Inbound SOAP for IDoc : Register Service in R3 , the documentation says "You execute the report SRT_REGISTER_SERVICE to activate Inbound SOAP for IDocs." But I'm confused what needs to be done after that.
Can anyone throw some more light on the following issues :
a) where does the WSDL get stored for the IDoc,
b) how to register a particular IDoc as a web service such that it can be called from third party system.
Thanking all the experts in advance for their valuable time and help.
Regards,
Advait.Hi Advait,
Did you get any further with this problem. I have the same issue and I don't know how to go further on this
Ron -
Soap -- XI -- IDOC/RFC scenario
Hello,
I have a jsp page that working in tomcat server.
I want to send values from jsp page to xi to r/3. I think it will have
soap-- xi -- IDOC/RFC scenario
Pls send me pdf /doc to implemet it
RegardsHi,
Please Refer the Following Links
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi - Invoke Webservices using SAPXI
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
Regards
Khanna -
i have scenario SOAP to IDOC
when i'm using business service in sender side it is getting an error as follows
sender message can not convert to ALE Logical system
in this i'm using altova spy as testing tool
my sender interface is asynchronous
but when i'm using business system everything is working fine
In sender side i'm using soap adapter,i checked the logical system everything is fine
mainly the problem is why it is working when i'm using business system rather than business service
my pi version is pi 7.0
thanks in advance
regards
satishHi Satish,
You are sending IDOC's to SAP system right. we should create Business system not business service.
so we should create the business system as web AS ABAP in SLD and import the same in ID.
When we create the business system in SLD the logical system name is assigned for the business system. like SAPCLNT100...It plays a key role in IDOC scenarios.
sender message can not convert to ALE Logical system
Reasons for this issue is
1) logical system name is unable to read from SLD for that corresponding business system.
Goto business system click on Adapter specific identifiers from the menu --> read from SLD.
it will automatically fetch the logical system name from the SLD.
2) Sometimes the logical system name will be deleted from the business system in SLD.
Delete the business system and re-create it, and follow the above procedure.it will resolve your issue.
Regards
Bhargava Krishna -
SOAP to IDOC scenario: java.lang.NullPointerException
Our trading partners currently post their xml files directly to our Integration Engine, where they are converted to idocs and posted to ECC. I am now trying to change this scenario to a SOAP to IDoc scenario so that we can process the files through the Adapter Engine using HTTPS. But I am running into an error when trying to post an xml file and I'm wondering what I am missing.
My SOAP communication channel is configured as follows:
Transport protocol: HTTP
Message protocol: SOAP 1.1
Adapter engine: Integration Server
HTTP Security Level: HTTP
Do Not Use Soap Envelope: *Checked*
Default interface and namespace have been specified
QoS: Exactly Once
If I post an xml file to this channel using the RWB test tool, I receive message java.lang.NullPointerException. However, I can find the message via the Message Monitoring in the RWB, with versions for both the AE and IE, each with status Successful. The idoc is created and successfully posted to ECC.
If I post this same file to the same URL using a third-party tool, I get the same error message along with more details (listed below). Futhermore, a message does *not* show up in the RWB and thus does not get converted to an idoc and posted to ECC.
Any ideas??? Thank you.
<?xml version="1.0" ?>
- <!-- see the documentation
-->
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP:Body>
- <SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
- <detail>
- <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
- <text>
- <![CDATA[
java.lang.NullPointerException
at com.sap.aii.messaging.net.MIMEInputSource.decodeContentType(MIMEInputSource.java:425)
at com.sap.aii.messaging.net.MIMEInputSource.readBody(MIMEInputSource.java:323)
at com.sap.aii.messaging.net.MIMEServletInputSource.parse(MIMEServletInputSource.java:58)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:381)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
]]>
</text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>Here's the message log found in End-to-End monitoring from RWB test post (different from third-party tool message):
java.lang.NullPointerException
at com.sap.plaf.frog.FrogScrollPaneUI$1.propertyChange(FrogScrollPaneUI.java:113)
at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
at java.awt.Component.firePropertyChange(Unknown Source)
at javax.swing.JScrollPane.setHorizontalScrollBar(Unknown Source)
at javax.swing.plaf.basic.BasicComboPopup.createScroller(Unknown Source)
at javax.swing.plaf.basic.BasicComboPopup.<init>(Unknown Source)
at com.sap.plaf.frog.FrogComboPopup.<init>(FrogComboPopup.java:21)
at com.sap.plaf.frog.FrogComboBoxUI.createPopup(FrogComboBoxUI.java:410)
at com.sap.plaf.frog.FrogComboBoxUI.installUI(FrogComboBoxUI.java:178)
at javax.swing.JComponent.setUI(Unknown Source)
at javax.swing.JComboBox.setUI(Unknown Source)
at javax.swing.JComboBox.updateUI(Unknown Source)
at javax.swing.JComboBox.init(Unknown Source)
at javax.swing.JComboBox.<init>(Unknown Source)
at com.sap.jnet.clib.JNcToolBar$ComboBox.<init>(JNcToolBar.java:64)
at com.sap.jnet.clib.JNcToolBar.addComboBox(JNcToolBar.java:192)
at com.sap.jnet.clib.JNcAppWindow.newUI(JNcAppWindow.java:607)
at com.sap.jnet.clib.JNcAppWindow.newData(JNcAppWindow.java:1097)
at com.sap.jnet.JNetData.createGraphFromDOM(JNetData.java:512)
at com.sap.jnet.JNetData.load(JNetData.java:709)
at com.sap.jnet.JNetApplet.initJNetApplet(JNetApplet.java:524)
at com.sap.jnet.JNetApplet.access$000(JNetApplet.java:40)
at com.sap.jnet.JNetApplet$1.run(JNetApplet.java:265)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source) -
Error in SOAP to IDoc scenario
Dear Experts,
I have one SOAP to IDoc scenario where I am sending the request through Altova XML spy.
But I am getting the error "Only asynchronous processing supported for IDoc adapter outbound processg". but I have configured the QoS of Sender Communication channel as "Exactly Once(EO)" and I have activated the same.
In SXMB_MONI the "Type" of this scenario is also "Sync".
The created SOAP request URL is :" http://server:host/sap/xi/engine?type=entry&version=3.0&Sender.Service=BS_XXX&Interface=http%3A%2F%2Fsoapadapter_SOAPtoIDoc%5EMI_XXX.
Here I am getting the error as "Only asynchronous processing supported for IDoc adapter outbound processg".
If I send the service usinng the URl "http://server:port/XISOAPAdapter/MessageServlet?channel=:BS_XXX:CC_SOPtoIDoc&version=3.0&Sender.Service=BS_EAN_DELE&Interface=http%3A%2F%2Fsoapadapter_SOAPtoIDoc%5EMI_XXX",then I am getting HTTP 500 error.
Can you please suggest me where I have to change the configuration so that the "Type" will be async and the IDoc will be posted properly.
Thanks in advance.
Regards,
Amit Mandalhi,
you can also do it like this:
http://server:host/sap/xi/engine?type=entry&version=3.0&ProcessindMode=Asynchronous&QualityOfService=ExactlyOnce
&Sender.Service=BS_XXX&Interface=http%3A%2F%2Fsoapadapter_SOAPtoIDoc%5EMI_XXX.
and set use query string parameter in soap sender adapter
Regards,
Michal Krawczyk
Maybe you are looking for
-
IPhoto '08 - can't drag images
Unable to drag folders of images from desktop or CD into an iPhoto album. Unable to drag images from iPhoto to Desktop.
-
Java web start and db connection problem
Hi I have an application that that connects to a db directly using jdbc . The problem i have is that when i start the app thru the web start it shows me this error java.sql.SQLException: Unable to connect to any hosts due to exception: java.security.
-
New ipod won't make a library on my Windows ME comp.
what should i do to get it to work?
-
Captivate movie as progressive download?
I've optimized my recorded movie as much as possible in Captivate but it's still over 3MB. It's going to take a user forever to download/play in their browser. Is there any possible way to generate a Captivate movie that will download progressively?
-
Offline dev licence not working
Have been struggling with this for weeks now. No choice but to ask for help! I can't get any kind of offline development setup working. Following the guide called: "Sideload Apps with DISM" http://technet.microsoft.com/en-GB/library/hh852635.aspx I s