SOAP to RFC : Message visible in Message Monitoring , but not in SXMB_MONI

Hi Experts,
I'm doing a SOAP to BAPI scenario. The interface is a SYNCHRONOUS one . I'm using XML SPY as the soap client to test the interface. Even though i don't have the test for the BAPI after sending an empty request message i'm able to receive an empty response from the BAPI. I'm also able to see the message send in message monitoring .
But when i go inside SXMB_MONI its acting in a strange way . I'm not able to see the any of the messages. Any ideas??
Thanks & Regards,
Rahul.

Hi Rahul,
Synchronous messages are not persisted on the Integration server unless logging is switched on in SXMB_ADM Tcode(Specific Configuration->RUNTIME(Category)->LOGGING_SYNC(Parameters)).
That's the reason you couldn't find SYNCHRONOUS message in SXMB_MONI.
Thanks,
Jag

Similar Messages

Once I turn off the browser and then try to use it later, I get a message saying its already running but not responding. tells me to close it which I cant do since its already closed. Forces me to restart my computer

Each time I start, use and close Firefox, when I try to use it the 2nd time, I get a message saying its already running but not responding. It Isn't. I have to restart my computer everytime I want to use Firefox.
== This happened ==
Every time Firefox opened
== I downloaded the new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; Win64; x64; SV1; GTB6.4; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: '''[http://kb.mozillazine.org/Kill_application Kill Application]'''
'''Causes and solutions for Firefox hanging at exit:'''
'''[[Firefox hangs]]'''
'''[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit (Mozillazine article)]'''
'''[[Firefox is already running but is not responding]]'''
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox SafeMode is a diagnostic mode that disables extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes before starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. You have to close and restart Firefox after each change via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

HT201412 My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

They are not text messages, they are iMessages.
Turn on iMessage on the iPhone.

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats)?

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats
Happens isnce a week or four...

https://www.dropbox.com/s/h20hiaxiuynz6z5/Blendle%20week%2051%202014.pdf?dl=0
https://www.dropbox.com/s/eohk8an2rozwe5w/NatGeo2015.pdf?dl=0
Until a few weeks ago no problems with this kind of files

Report visible for one user but not for other user

Hi all,
We have a situation where a report is visible to one user but not to some other user. What could be the possible explanation for this? Please let me know.
I need quick responses.
Thanks in advance,
Sananda

Hi Sananda,
Just assign the saem roles as the other user who can view ..
You can inform the Auth/basis team and they shud be able to do this..
The T Code is RSECADMIN>user Tab>Assignment>user.Display and BView the roles here..
or goto SU01 and check for the Roles Tab.....
The New user must have the same roles as that of the other..
Rgds
SVU123
Edited by: svu123 on Sep 22, 2010 7:14 AM

Pictures I've taken are visible on my iPhone but not my camera roll. has happened twice.

Pictures I've taken are visible on my iPhone but not my camera roll. This has happened twice. On a set of pictures taken 11/2/13 and today 11/5/13. Is there a solution for this. This is unacceptable. Now it's not showing any new pictures taken at all.

SisterDee wrote:
I'm with you. It doesn't make any sense to me either. However, when I view my pictures as a collection and select it - nothing is there. It is a clear picture.
The problem is that what you originally said, "Pictures I've taken are visible on my iPhone but not my camera roll" , has nothing to do with your actual problem.
Define "clear picture". Do you mean blank image? Are you saying there are no pictures to view, only blank screen where the picture should be?
If so, restore the iOS in iTunes:
iTunes: Restoring iOS software

Messages are displyed in AE but not in IE

Hello All,
We are implementing the SAP PI interfaces for our new project.
And while testing we are facing the veered bhaviour of SAP PI functionality.
while testing we can't see all the messages in SXI_MONITOR.
For example Inbound interfaces JMS to IDoc,
I can see 10 successfull messages in adapter engine monitoring and also in ECC WE02 I can see 10 Idocs.
But in SXI_MONITOR I can see only 2 messages.
There is one to one scenario for one JMS message from queue we are generating one Idoc using XSLT mapping.
So can anybody help me to resolve this or point out if any setting is missing from basis side.
Thanks,
Anant

Hi Anant
May be the time frame that you are setting in the filter or IE is not in range of time that the message flowed.
1. Check in rwb-->IE-->message overview. Check if the count shows same as IE or not.
2. Get the messaged ID's from the AE and search in IE. See if you can find it.
3. I hope you are not using ICO's . As messages for ICO's cannot be found in IE
Regards
Osman

When I open Firefox I get the message "Firefox is already running but not responding . . .

I am using Firefox 3.6.9 with Windows XP SP3. Almost every time I try to open Firefox I get the message:
"Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."
I then must open Task Manager and find Firefox and stop the process.
I run Firefox on 4 Windows machines and this is the only machine that I have this problem on.
I have looked at the Mozilla Firefox KB and have tried to check on the items that could be causing the problem. I have update my Java in Firefox. I have un-installed Firefox leaving the Bookmark preferences, etc. on my machine, ran CCleaner to clean the Registry of remaining Firefox items and then re-installed Firefox - I still have the problem.
I have installed Google Chrome to fix this problem but now I find that several of the websites and companies I do business with are not compatible with Chrome.
How can I fix this problem? Why am I only having this issue on 1 of my 4 Windows machines?
Thanks!
Bill Artman

For possible causes see [[Firefox is already running but is not responding]].

SOAP TO RFC scenario (where the R/3 is not in same network)

Dear Friends,
I am trying to configure a SOAP to RFC (syn).where my SAP R/3 system is in our network .And we dont have all the details for creating a BUSINESS SYSTEM. I tried with BS.but every time I am getting "FAILED TO CALL ADAPTER ENGINE Error ,,,witha no_receiver_aggrement clause".
but i have done the same scenario where the R/3 system is in the same network.
I would like know ,what are the pre-requites for confeguring such a scenarion.And please give a detailed idea...
where what is required and why........
thanks,
jeevan.

Hai Raj,
Thanks for your reply.
My admin says.....the particular IP has full permissions...
One more thing when i am trying to import the BAPI request.I am able to get the data from the remote SAP.
So i believe everything is fine from NETWORK side.
And in the receiver RFC communication side I have seen just by changing the sap IP address to the public IP (Earlier the scenario was working fine with the local SAP system).
I doubt do I have to do in the SLD business system level.
thanks,
jeevan.

Can I stop the output of PO message on change of order but not on creating

Can I set customising so that the PO automatically creates a message on creation of the order, but not when it is changed. That way the purchaser can choose to recreate the message if necessary. Sometimes changes are made to the order for internal purposes, but the order does not need to be resent to the Vendor. Currently this happens automatically via an email.
Alternatively, is it possible to print the whole PO when changes are made rather than just the bits that have been changed? To avoid confusing the Vendor with half the order being resent.
Thank you
Karen

This is not possible on standard SAP. There is a workaround you can consider so user can reprint the entire PO. When users have made the changes and ready to print the PO, they can go to PO message screen and do the followings:
1. Delete the entry corresponds to change message (this is the row with yellow light and has check mark in the C column)
2. Select the row corresponds to the first printing of PO (this is the row with now check mark in the C column) and press on repeat output.
Once they've done these steps, the entire PO will be included in the output.
If you need to make this happened automatically, you will need to do custom development.
Hope this helps.

I want to send messages using my iPad Air but not as iMessages

I Don't want to use iMessages but do want to be able to send messages (they can stay green) because I sometimes want to do the message but not to another apple user. I am unable to send any messages using the text bubble icon, or receive them to look back at them, except on my phone. Do I need to sync those somehow or changes settings. I have disabled "iMessage" in my settings! I could do this for a while but have had several changes since then trying to get my iPad to be what I need it for.

To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

New message address shows the Name but not full email address

The email To: will show the name eg John Doe but not the full description [email protected] If I click on the tab by the name I will see the full email address referenced. If mail sees just the name it sometimes says John Doe does not appear to be a valid email. If I send an email to myself at other email accts I have (aol for example) the mail does arrive. I think this may be related to address book but not sure. If I enter a new email in the TO in a new message It keeps the entire email address, I think. Anyway just want some feedback about this since thee is a degree of uncertainty here

mail will indeed draw from address book's contacts. if you have in mail>preferences>viewing the option "use smart addresses" checked, then the name of the contact will be displayed in the to/from... fields and you can see the full email address when selecting the tab next to the name. so that is normal behavior. if you enter a new email address for which you do not have a contact card created in address book, then that will remain as an email address in the field you entered it to. you would have to create a card in address book, add that email address, and then the name of the contact would appear in an email field rather than only the email address.
hope this helps

Yosemite Mail copying messages to mailboxes scrolls down but not up

Hi all
I frequently move messages from the Inbox to mailboxes by dragging them to the sidebar. If the destination mailbox is off the screen, it scrolls to it when I hold the message over the top or bottom of the sidebar. In Yosemite it will do this downwards but not upwards! Very odd.
Any ideas?
Thanks, Paul

Curent problem for me - upgrade to 5.1 today causes my email accounts to be stuck in "checking for mail" mode -- no new email coming in - I have two accounts - gmail and an Exchange outlook - both stuck. I deleted my gmail account and reinstalled but it did not help - now I have none of the emails on their that I had before, and it is still stuck checking for mail. Since uninstalling and reinstalling gmail did not help, I have not tried that with my Exchange account for work.

Attachments visible with internet mail, but not with Mail.app

Others have written before about this question, but I don't find a satisfying answer (that would have to come from the Apple people themselves). I received emails that contained several attachments (pdf files), as visible from the size of the messages and the raw source, but only one or two of the attachments showed in the Mail application (version 4.5), and sometimes there was even no body text. I was puzzled and went to the web application of my provider to look at the same messages. EVERYTHING was there! so I decided to transfer the messages again to myself, and miraculously everything was there as well in Mail.app.
Now, is this a weakness of Mail.app, a wrong use of attachments by the sender or what else? Anyway, it is annoying, because I wonder how many attachments I have never seen.
Does anyone know of a solution, please?

Okay, I found the answer if anyone is having the same problem. The Mail POP settings on the Mac for the various Accounts I had were outdated. They were just for Dial-Up. Here is the link for the entire ATT page that deals with High Speed and iPhone connections, and the part in particular that helped me get it going.
http://help.att.net/docs/use/email/gen/prbxxx_xxx_mail-news-settings.htm?area=customeremail-osxmail&platform=OSMAC&faqcounter#isps
Note: Worldnet support is limited to providing the iPhone E-mail Configuration Settings. For all other iPhone technical support issues, refer the customer to: att.com/wireless
Note: If you are using Mac OS 10.x, set up Mac OS X Mail to access your AT&T Worldnet Service e-mail.
E-mail Settings:
Mail Server Type: POP3
Incoming Mail (POP): ipostoffice.worldnet.att.net
Outgoing Mail (SMTP): imailhost.worldnet.att.net
Note: If you are using Netscape Mail, enter your other ISP's outgoing e-mail server. If you are not sure what the SMTP server name is, contact your non-AT&T Worldnet Service ISP.
Ensure that the option My server requires authentication is checked.
User name or POP name: Enter the full e-mail address in the User Name field. For example: [email protected] or [email protected]
Ensure that the option Always connect to this account using is selected, and Local Area Network is chosen from the drop-down menu on the Connections tab.
Ensure that secure connection (SSL) is enabled and set to port number 465 for SMTP.
Ensure that secure connection (SSL) is enabled and set to port number 995 for POP3.
Cheers, Charlie

Cs5 opens fine with 2 monitors but not with one? (Macintosh)

Hi, I use a macbook pro with an external apple display.
When I open a file in CS5 and the second monitor is plugged in, everything opens perfectly. The tabs are in the 2nd monitor and the image opens in that same monitor.
However, when the monitor is NOT plugged in and I try to open a file on the laptop alone, the application opens fine, the tabs open (I can see the image I am trying to open as a thumbnail in the layers palatte) BUT the image itself does not appear. If I then plug in the apple display the image appears over there on the second monitor. I cannot explain what happened to make this change and now I cannot make it work so that I can work on files without a 2 monitor being plugged in....
Many thanks for any help
Thanks, Roger

Welcome to the forum.
This is just a guess, and does come from a PC-user, so might not apply, but if you have a dual-monitor setup, there is a likliehood, that some parts of PS are displayed only on your second monitor. Before deactivating your second monitor, I would check that NOTHING in PS is showing on the second monitor - no dialog boxs, etc., NOTHING.
To illustrate, friend brought his new MacBook Pro over to show me how well PS worked on it. He kept getting what appeared to be program hangs, with many operations - nothing would work, and he had to kill PS, as it became unresponsive. I watched the operations, that were seemingly hanging the program, and tested on my PC laptop. He allowed as how he normally had a dual monitor setup, back in Colorado, so I just grabbed a spare monitor, and we hooked it up.Viola, each of those operations had their dialog screen showing up on the second monitor. They were working fine, but without that second monitor, they were invisible, and waiting for input, hence the program seemed to hang. He moved all of those to the main monitor, we disconnected the second monitor, and all was good again.
Not sure if things like dialog boxes would be affected, but you might want to explore creating a Custom Workspace, that ONLY shows on the main monitor, and then, when the second monitor is unplugged, just choose THAT Workspace.
Good luck, and hope that helps,
Hunt

SOAP to RFC : Message visible in Message Monitoring , but not in SXMB_MONI

Similar Messages

Maybe you are looking for