SOAP vs. XML-RPC for synchronous Web Services applications

Hi everyone, I have to finish one project soon and I have to make a decision. Because I don't have much time I want to ask if anyone can answer me, what are the major differences bettween SOAP vs. XML-RPC for synchronous Web Services applications. I'll be very grateful if you help me!
Thanks in advance!

Come on guys i know you can help me, please don't hesitate to write some row

Similar Messages

Creating SOAP Receiver comm.channel for axis web service

Hi,
I created Soap Receiver comm. channel fro Axis web service like below:
*Target URL* : http://<IP>:<Port>/<x>/service
*User:* <user>
*Password :* <password>
*SOAP Action:* <target namespace>/method
when i drive PI Message that use Soap Receiver it get error below
I do same method for .Net web service, it runs properly.
How can i solve this problem?
Error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Mapping program is not available in runtime cache: Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I did all but nothing changed?
I have doubt about axis side. Because respose like below.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
May be Soap Receiver setting for axis web service must be different.
Thanks.

Mapping DTO to XML Schema for Worship Web Service

I have a number of DTOs that my application uses. This application
needs to consume a number of document style web services created in
workshop. When I generate the proxies for this web service, it creates
Java beans for the XML schema types defined in the web service.
Is there a way to get the workshop stubs to map my DTOs to XML schema?
If not, what is the best way to do this mapping? Thanks.
Mike

I have a number of DTOs that my application uses. This application
needs to consume a number of document style web services created in
workshop. When I generate the proxies for this web service, it creates
Java beans for the XML schema types defined in the web service.
Is there a way to get the workshop stubs to map my DTOs to XML schema?
If not, what is the best way to do this mapping? Thanks.
Mike

Mapping DTO to XML Schema for Workshop Web Service

I have a number of DTOs that my application uses. This application
needs to consume a number of document style web services created in
workshop. When I generate the proxies for this web service, it creates
Java beans for the XML schema types defined in the web service.
Is there a way to get the workshop stubs to map my DTOs to XML schema?
If not, what is the best way to do this mapping? Thanks.
Mike

I have a number of DTOs that my application uses. This application
needs to consume a number of document style web services created in
workshop. When I generate the proxies for this web service, it creates
Java beans for the XML schema types defined in the web service.
Is there a way to get the workshop stubs to map my DTOs to XML schema?
If not, what is the best way to do this mapping? Thanks.
Mike

The format of XML file returned from web service

Hi everyone,
My web service (build in asp.net 2.0 with C#) returns the
following xml file which is not what I want.
<Root>
<Root2>
<Person> .... </Person>
<Person> .... </Person>
<Person> .... </Person>
</Root2>
</Root>
But I want my web service to return the following xml file.
How can I get the following xml file instead of the above xml file
? Thanks.
<Root>
<Person> .... </Person>
<Person> .... </Person>
<Person> .... </Person>
</Root>

Thanks for everyone's reply!
Sorry, I don't know where to set resultFormat="e4x". Below is
my code. And LINE 111 gives error. And the error message is below.
And the xml returned from the web service is below.
Error: Error #2093: The Proxy class does not implement
getDescendants. It must be overridden by a subclass.
at Error$/throwError()
at flash.utils::Proxy/
http://www.adobe.com/2006/actionscript/flash/proxy::getDescendants()
at
LogIn/loginHandler()[P:\JIMMY-FLEX\Flex_LogIn\LogIn.mxml:58]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at
mx.rpc::AbstractService/dispatchEvent()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\A bstractService.as:232]
at mx.rpc::AbstractOperation/
http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()[E:\dev\3.0.x\frameworks\pro jects\rpc\src\mx\rpc\AbstractOperation.as:193
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::resultHandler()[E:\dev\3.0.x\frameworks\projec ts\rpc\src\mx\rpc\AbstractInvoker.as:191
at
mx.rpc::Responder/result()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\Responder.as:4 1]
at
mx.rpc::AsyncRequest/acknowledge()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AsyncR equest.as:74]
at
DirectHTTPMessageResponder/completeHandler()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\ messaging\channels\DirectHTTPChannel.as:381]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
width="100%" height="100%" xmlns:ns1="*">
<mx:Script>
<![CDATA[
import mx.rpc.events.ResultEvent;
namespace FaciNS = "
http://FaciNet.com/";
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
import mx.rpc.soap.WebService;
//public var __xmlResult:XML;
public var ws:WebService;
public function Log_In(UN:String, PW:String):void
ws.Login(UN, PW);
public function getLoginData():void {
loadWSDL();
Log_In(UN.text, PW.text);
public function loadWSDL():void
ws = new mx.rpc.soap.WebService();
ws.wsdl = "
http://localhost:50779/VS2008_LogIn/Service.asmx?wsdl"
ws.useProxy = false;
ws.addEventListener("fault", faultHandler);
ws.addEventListener("result", loginHandler);
ws.loadWSDL();
public function loginHandler(e:ResultEvent):void {
var wkSouID:String = e.result[0]..SouID; // LINE 111
trace(wkSouID);
public function faultHandler(event:FaultEvent):void
dispatchEvent(new Event("Error"));
public function checkUser(UName:String, PWord:String):void {
getLoginData();
]]>
</mx:Script>
<mx:Panel id="loginPanel" horizontalScrollPolicy="off"
verticalScrollPolicy="off" width="400" height="200" x="97"
y="66">
<mx:Form id="loginForm" width="100%" height="100%">
<mx:FormItem label="Username:" color="red">
<mx:TextInput id="UN" />
</mx:FormItem>
<mx:FormItem label="Password:" color="red">
<mx:TextInput id="PW"/>
</mx:FormItem>
</mx:Form>
<mx:ControlBar>
<mx:Spacer width="100%" id="spacer1"/>
<mx:Button label="Login" id="loginButton"
click="checkUser(UN.text, PW.text)" />
</mx:ControlBar>
</mx:Panel>
</mx:Canvas>
<?xml version="1.0" encoding="utf-8" ?>
- <ArrayOfLogIn xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="
http://www.w3.org/2001/XMLSchema"
xmlns="
http://tempuri.org/">
- <LogIn>
<SouID>2</SouID>
<LogInUserID>3</LogInUserID>
<LogInUserName>samlam</LogInUserName>
<Password>abc123</Password>
<DialectID>4</DialectID>
<CreatedByUserID>5</CreatedByUserID>
<UpdatedByUserID>5</UpdatedByUserID>
</LogIn>
- <LogIn>
<SouID>3</SouID>
<LogInUserID>4</LogInUserID>
<LogInUserName>samlam</LogInUserName>
<Password>abc123</Password>
<DialectID>4</DialectID>
<CreatedByUserID>5</CreatedByUserID>
<UpdatedByUserID>5</UpdatedByUserID>
</LogIn>
</ArrayOfLogIn>

Web-service client for legacy web service

I currently access a legacy server (Lotus Domino 7) via CORBA. I thought a web service (my second) would be faster, but a whole day's research has uncovered only obsolete or trivial examples.
The WSDL generated by the server is rpc/encoded so wsimport cannot generate the necessary "artifacts" for a web service client.
The web service is simple: it accepts two java.lang.Strings, and returns a java.lang.String of XML. The "dynamic proxy" approach from 1.4.2 seems to have disappeared; I was hoping that approach would let me just hand-code a single "artifact" - an SEI based on the method information in the WSDL.
1) What classes in JAX-WS will let my web service client communicate with rpc?
2) With such a simple signature, do I need any other "artifacts" beyond an SEI?
Thanks for any help!

In case anyone's search leads them here, I've posted the solution at:
*[http://www.pby.com/general.nsf/webarticles/dominowebservice01]*
It is an exhaustive article (not "Hello World"!) that goes through several versions of the web service and client - hopefully explaining all* pieces of the puzzle:
~ web service code,
~ WSDLs
~ schema
~ thoroughly-documented clients that do and do not use JAXB
~ ... that use generated artifacts
~ ... that customize existing POJOs
~ the SOAP messages generated in each direction
~ the necessary JAXB annotations
~ explanations of how the code works
~ explanations of how namespaces affect the code
~ on and on and on...
My constant goal was to write an uncomplicated solution that uses as few artifacts (two) and annotations as possible. The end result is a small, fast JAX-WS 2.0 client that uses JAXB to invoke and consume a secured Domino 7 (1.4.2 JVM + AXIS) web service, using RPC/literal SOAP messages.

SOAP and XML-RPC

Which are Oracle's plans for supporting SOAP and XML-RPC?

Oracle iAS 9i release 1.0.2.2 contains SOAP server support for Java programmers.
Oracle iAS 9i release 2.0 will feature more support, as will an upcoming version of JDeveloper to simplify the development and use of Web Services.

Invoking Synchronous Web Service from BAm alerts ( 11g)

I am invoking a synchronous web service for BAM Alerts ( defined in rules )
There r 2 actions Email and Call web service.
EMail works fine
But for calling a web service I get the following error in logs
Content-Type = text/html
Server = Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server
Date = Tue
Date = 29 Dec 2009 17:09:54 GMT
<html>
<head>
<title>Exceptional Event Occurred</title>
</head>
<body>
<br>
An exception occurred while processing your request, please contact your Manager or Supervisor.
<br>
</body>
</html>
Dec 29, 2009 11:09:54 AM oracle.bam.common.logging.Log writeLine
SEVERE: EventEngine: Action exception: EEInstEv60 EEInstAct21 Rule Id: 7 exception: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html
Dec 29, 2009 11:09:54 AM oracle.bam.common.logging.Log writeLine
WARNING: EventEngine: Exception stack trace:
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.call2(HttpSOAPConnection.java:209)
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:136)
at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:129)
at oracle.bam.eventengine.engine.event.action.TakeWSAction.invokeService(TakeWSAction.java:143)
at oracle.bam.eventengine.engine.event.action.ActionProcessor.callWebService(ActionProcessor.java:1023)
at oracle.bam.eventengine.engine.event.action.ActionProcessor.actionHandler(ActionProcessor.java:434)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.bam.system.Delegate$Sink.invoke(Delegate.java:80)
at oracle.bam.system.Delegate.dynamicInvoke(Delegate.java:186)
at oracle.bam.common.threading.threadpool.ThreadPoolController$PoolQueueItem.processWorkRequest(ThreadPoolController.java:154)
at oracle.bam.common.threading.threadpool.ThreadPoolController$PoolQueueItem.run(ThreadPoolController.java:128)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619)
The alert history shows both actions
And also one more question related to alerts:
Suppose we have selected rule as status =fail and flag =y , frequency 3 secs
Then until the status is fail and flag is y the action should occur every 3 secs
The behavior I see right now is
whenever I update the Data object and condition meets the action happens
but the rule i select was data field d meets criteria not data field update as criteria

I replied to you by email but for the benefit of others, I will paste email content here:
Let me take the questions one by one:
1. Regarding Webservice action issue, I am going to need little more information as:
a) Have you tested the webservice with some external tool like soapui using the same endpoint url and same payload to see if it works fine?
b) Is it a secure webservice?
c) Does it require any policy to be attached?
d) If response to a) is yes, and if it is okay with you, can you share the webservice wsdl url with us along with the operation to be selected and the payload?
2. On Alert behavior:
Alerts by design fire only for the runtime changes that happen to the dataobject and satisfy the condition you choose and not for the conditions that are satisfied by the data that exists before alert is created and activated. So, in your case, not only for update but even for insert and delete of data, alert will fire if condition is met but the requirement is those changes should be happening to the dataobject after alert has been activated.
Moreover, I would also like to make the behavior of Frequency Constraint clear here - I am copying the below text from official BAM Alerts doc, this will make it clear that frequency constraint doesn't mean that every x seconds, alert will evaluate the condition but rather that if within x seconds, condition gets met multiple times, alert will fire only once.
Frequency Constraint
The Frequency Constraint feature prevents a user's email inbox from being flooded with alerts by limiting the number of alert messages that can be sent out during a given time interval.
Frequency Constraint can be edited only if it is appropriate for the event selected. otherwise it is disabled. It can be set to a value of time which could be in seconds, minutes, or hours.
This limits the number of times the rule launches in a given time period. With real-time data, transactions can occur every millisecond, so alerting frequency must be controlled.

Good books for java web services

hi.. i want to learn java web services. can anyone pls tell me the good books or material if any to start with. I have exp in core java.

http://www.soabook.com/ The Good Book for modern web service development in Java.
http://www.amazon.com/J2EE-Web-Services-SOAP-JAX-RPC/dp/0321146182 The Bible about all things web services.
Get them both, use the first to learn and the second as a reference.

(268625273) Q WSI-29 Can you give any performance benchmarks for WLS web services?

Q<WSI-29> Can you give any performance benchmarks for WLS web services?
A<WSI-29>: It is very difficult to quantify performance aspects of web services
since they depend on so many variables including but not limited to: backend system
processing by stateless session beans and message driven beans, size of XML SOAP
message sent, system hardware (CPU speed, parallel processing, RAM speed) and
system software (JVM type and version of WebLogic server). However, let me point
out that the EJB backend processing of requests both have the best possible scalability
within the EJB2.0 specification (both stateless session and message driven beans
can be pooled) and servlets have a proven scalable track record. Thus it should
be possible to scale your web service deployment to meet demand. The overhead
in processing XML within the servlet can be significant depending on the size
of XML data (either as a parameter or a return type). While WLS6.1 does not have
any features to address this performance concern, WLS7.0 will feature Serializer
and Deserializer classes which can be dedicated to the XML to Java and Java to
XML translation (they can also be automatically be generated from a DTD, XML Schema
or regular JavaBean).
It is true that web services are not the fastest way to process client requests
but BEA is committed to making WebLogic server the fastest possible service provider.
Adam

see http://www.oracle.com/support/products/oas/sparc30/html/ows08811.html

Session management for a web service

I am building a web service where the user will need to login and the application will need to maintain a persistent session. I am using Apache Axis2 for client/server communication via SOAP/XML. What would the simplest and most common way of doing this? I know I could implement session management from scratch similarly to how a browser does it, using cookies, but I'd rather use standard Java libraries for this. Am I correct in assuming that even though I'm using Axis2, the solution doesn't really have anything to do with Axis2 since Axis2 is basically just a way for the client/server to send messages to each other?
I've read a lot of information online about this, but there's so much information that it's hard to know where to start. Basically I'm just looking for someone to point me in the right direction on what classes to use and so on. I just need a simple username password authentication and session management system for a web service.

Container Managed Authentication. Does everything you need.

Getting BPM response in a synchronous web service

We have a synchronous web service - an EJB whose methods are exposed as web service
methods. The EJB acts as a broker, and channels web service requests to the BPM.
Each web service request (i.e. each EJB method) needs to interact with a few AppView
services. We plan to use the BPM as an intermediate layer. Hence each EJB method
needs to start a BPM workflow, wait for its completion (as the web service is
synchronous) and get the output response XML to return to the web service client.
In this scenario, we have questions in two major areas -
1) How does the EJB get the response from the workflow? For e.g. If we use sendXMLToClient
in the workflow, how is it received by this EJB? Alternatively, is it better to
put all the response in workflow variables, and inspect it after the workflow
completes i.e. after WorkflowInstance.waitForCompletion() ? What would happen
in case of exceptions = where would they be caught?
2) There are various simultaneous tasks in the workflow, and we want to merge
the XML response of all of these. How is it best done?
Note that all of these are dynamic and need to be done in code i.e. Human intervention
through worklist / studio is not expected.
Please advise.
Regards,
Milind Prabhu
[mailto:[email protected]]

You can try the message driven bean.
It will slove your problem.
and you can use the database to save your run time xml response.
Good luck!
"Milind Prabhu" <[email protected]> wrote in message
news:3c55830c$[email protected]..
>
We have a synchronous web service - an EJB whose methods are exposed asweb service
methods. The EJB acts as a broker, and channels web service requests tothe BPM.
Each web service request (i.e. each EJB method) needs to interact with afew AppView
services. We plan to use the BPM as an intermediate layer. Hence each EJBmethod
needs to start a BPM workflow, wait for its completion (as the web serviceis
synchronous) and get the output response XML to return to the web serviceclient.
In this scenario, we have questions in two major areas -
1) How does the EJB get the response from the workflow? For e.g. If we usesendXMLToClient
in the workflow, how is it received by this EJB? Alternatively, is itbetter to
put all the response in workflow variables, and inspect it after theworkflow
completes i.e. after WorkflowInstance.waitForCompletion() ? What wouldhappen
in case of exceptions = where would they be caught?
2) There are various simultaneous tasks in the workflow, and we want tomerge
the XML response of all of these. How is it best done?
Note that all of these are dynamic and need to be done in code i.e. Humanintervention
through worklist / studio is not expected.
Please advise.
Regards,
Milind Prabhu
[mailto:[email protected]]

Need to auto-generate SDK for REST web service.

My company has developed a REST API for some web services, and we'd like to provide users with a Java SDK for consuming those services.
Our services are described by an XSD schema. On the backend, we are using JAXB to create Java classes corresponding to the schema. We create the request objects based on the parameters in the REST url, and JAXB converts our response objects from Java to XML.
We'd like to provide our users with similar Java classes on the client side. They should be able to create the object corresponding to the request, fill in various parameters, and submit it to our web service. The SDK should automatically convert the object into a REST URL, hit the URL with a Get, read the XML response, and convert that response into Java objects.
It seems like we should be able to auto-generate such an SDK based on our schema.
It seems like there are several tools for doing this for SOAP web services. For example, Apache Axis has Java2WSDL and WSDL2Java.
Can anyone recommend tools for creating client-side libraries for consuming RESTful web services? Does anyone have advice on products to avoid?

Replying to my own post here. The WADL2Java project on java.dev seems to be more like what I need. The only user-experience I've seen on the 'net is in this forum post:
http://forum.java.sun.com/thread.jspa?threadID=5239123&tstart=0
Anyone else used it?

Why i am I getting Error (5,8) TestCas for a Web Service Test File Generate

why i am I getting the following error for a Web Service Test File Generated by jdeveloper when i run it:
Error (5,8) TestCase not Found
Error(12,14):constructor Object(java.lang.String) not found in java.lang.Object

actually i removed that error by added the junit.jar to my libraries but i am getting a new error when accessing the webservice with a Jdev generated web service proxy:
WARNING: Unable to connect to URL: https://mytest.test.com/WebService/MyTest_1.0/soap.soap due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
java.rmi.RemoteException: ; nested exception is:
     HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
     at project7.proxy.runtime.MyTestSoapBinding_Stub.echoOfficeLocation(MyTestSoapBinding_Stub.java:11977)
     at project7.proxy.MyTestClient.echoOfficeLocation(MyTestClient.java:1276)
     at project7.proxy.MyTestClient.main(MyTestClient.java:38)
Caused by: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
     at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(HttpClientTransport.java:174)
     at oracle.j2ee.ws.client.http.HttpClientTransport.invoke(HttpClientTransport.java:150)
     at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:176)
     at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:113)
     at project7.proxy.runtime.MyTestSoapBinding_Stub.echoOfficeLocation(MyTestSoapBinding_Stub.java:11961)
     ... 2 more
Process exited with exit code 0.
looks like something to do with the certificate or keystore... how do you add the keystore to JDev.. i tried the JDK cacert but that doesnt work...

Details for 'Is Web service security available?'

Hi i am working on scenario rfc to webservice.Its as secued webserivce i need to do ssl configuration.
In component monitoring..for the integration engine its in yellow...
Details for 'Is Web service security available?'
Communication error Proxy calls on the sender or receiver side are not permitted on the IS (client)
can any one please help me out..
Thanks
sriram

I have already installed certificates on the j2ee engine & i have given the paramaters for keystore entry & keystore value.Still i have the same error
In component monitoring
For integration engine
Details for 'Is Web service security available?'
Communication error Proxy calls on the sender or receiver side are not permitted on the IS (client)
In message monitoring
Audit Log for Message: f614df00-e9e0-11da-95ef-0004ac577b32
Time Stamp Status Description
2006-05-22 15:18:58 Success The message was successfully received by the messaging system. Profile: XI URL: http://saptst01:51000/MessagingSystem/receive/AFW/XI
2006-05-22 15:18:58 Success Using connection AFW. Trying to put the message into the request queue.
2006-05-22 15:18:58 Success Message successfully put into the queue.
2006-05-22 15:18:58 Success The message was successfully retrieved from the request queue.
2006-05-22 15:18:58 Success The message status set to DLNG.
2006-05-22 15:18:58 Success Delivering to channel: ZCH_VERISIGNPPGR
2006-05-22 15:18:58 Success SOAP: request message entering the adapter
2006-05-22 15:18:58 Success SOAP: call failed
2006-05-22 15:18:58 Error SOAP: error occured: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: illegal parameter
2006-05-22 15:18:58 Error Exception caught by adapter framework: Peer sent alert: Alert Fatal: illegal parameter
Can any one please help me out.
Thanks
sriram

SOAP vs. XML-RPC for synchronous Web Services applications

Similar Messages

Maybe you are looking for