SOAP-XI-FILE

hello,everyone
i will configure the scenario either from soap to file or
from file to soap via XI, but i don't know how to creat the wsdl file and configure the mapping program.
help me,help me,
urgent,urgent.
i am waiting online.
msn:[email protected]
phonenumber: 05468819437
thank you everyone 
best wish
Amanda Cao

Thanks,Felix
would u like to give me more information or some references. I really know a little about how to use BPM
Thanks,thanks
urgent,urgent,
help,help.
regards
Amanda

Similar Messages

  • File to Web service (SOAP) to File scenario with out BPM in PI 7.1

    Hi All,
    I have scenario File to Web service (SOAP) to File scenario with out BPM.i am getting the below error:
    1) Error MP: unexpected exception caught com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
    2) Error ROB: error during processing: com.sap.aii.af.lib.mp.processor.ModuleProcessorException: Processing Error
    PI server is 7.1 with SP:8
    I have configured the scenario like this
    1) 2 File channels - Sender & Receiver ,1 RFC channel - Receiver. We need to note that, the additional Module parameters need to be added only for sender File channel
    2) Created Sender Agreement
    3)Created Receiver Determination
    4)Created Interface Determination
    5)Created Receiver Agreement
    Regards,
    Ramesh

    Hi,
    Thanks for your reply!!
    My Scenario is File to SOAP to File.
    Configred modules  in Sender channal below:
    Prcessing sequence:
    Number       Module Name                                        Module Key
    1..........       AF_Modules/RequestResponseBean.......1
    2..........       CallSapAdapter..........................................2
    3..........       AF_Modules/ResponseOnewayBean.......3
    Module Configuration:
    Module Key                                       Parameter Name                                       ParameterValue
    1                                                        passThrough                                            true
    3                                                        receiverChannel                                       receiverChannel name
    3                                                        receiverService                                        receiverService name
    please tell any more confiration requered.
    Regards,
    Ramesh

  • Error in SOAP to file scenario

    Hey guys
    i m doing a SOAP to File scenario and getting the following error.
    <SAP:Stack>&quot;COMMUNICATION FAILURE&quot; during JCo call. Error opening an RFC connection.</SAP:Stack>
    any idea where should i look ?
    thanx
    ahmad

    Hey
    i m still getting a red flag in MONI,the error is
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
      <SAP:P1>Error opening an RFC connection.</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>&quot;COMMUNICATION FAILURE&quot; during JCo call. Error opening an RFC connection.</SAP:Stack>
      <SAP:Retry>A</SAP:Retry>
      </SAP:Error>
    i checked my mapping by copyin payload from MONI,its working fine.
    thanx
    ahmad

  • JCO problem in SOAP to file scenario

    Hey guys
    i m doin a SOAP to file scenario and getting a JCO error in moni,the status of my queue in SMQ2 is SYSFAIL,when i check the TCP/IP connection in SM59 i find error in two places
    AI_DIRECTORY_JCOSERVER and AI_RUNTIME_JCOSERVER .when i test connection for both of them i get the followin error "Error opening and RFC connection".
    is this error dues to some server problem of something wrong in my scenario.?
    the SOAP adapter in RWB is green.
    i tried to unlock and delete the queue in SMQ2 but when i execute my scenario again,it gets SYSFAIL error.
    thanx
    ahmad

    Hi,
    If you restart the J2ee engine, it will work.
    But The error may because of many reasons
    -Might be because of lots of messages are to be processed simultaneously.
    -Increasing the number of processes in VisualAdmin (VisualAdmin>JCO RFC Provider>AI_RUNTIME_<SID>) and see if that helps.
    -This  SAP Note may help u -709140.
    Hope this helps,
    Regards,
    Moorthy

  • SOAP to File in PI 7.1

    Hi
    I am looking for the SOAP to file scenario, Can anyone send the scenario with the exaples in PI 7.1 version,
    Thanks
    RP

    Hi,
    Please Refer This links.
    Here You will get detailed Explanation.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0205c42-5e86-2b10-b183-afc655b07f3f
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/importantPI7.1OSSNotes
    Re: Using SOAP Sender adapter in PI 7.1
    Thanks.

  • No mapping program found - scenario soap to file

    Hi all,
    I'm developing a PI scenario Soap to file and I have a following problem.
    My source is a third party System and my target is a ECC 6.0.
    I have created two data type, only different in one value.
    When tried to check my scenario, I obtain this error:
    <code>ADAPTER.JAVA_EXCEPTION</code>
            <text><![CDATA[
                    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:NO_MAPPINGPROGRAM_FOUND:
                    at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1214)
                    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
                    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
                    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
                    at java.lang.reflect.Method.invoke(Method.java:592)
                    </text>
    I have checked my message in the SXI_MONITOR's transaction and i see in column "Detail state", the next information:
    "Mapping: Error in Resource Resolution or Initialization"
    When i enter in my Error log, i can see the next information:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
      <SAP:P1>Object ID 7FD3FFAD6DBD3BAC9E91883B24CAF1CA Software Component 47B2EEC1B0F111DF8A0CF473AC1D633C</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>Mapping program is not available in runtime cache: Object ID 7FD3FFAD6DBD3BAC9E91883B24CAF1CA Software Component 47B2EEC1B0F111DF8A0CF473AC1D633C</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    i need some file transformation in SOAP-FILE scenario?
    It may be that have a mistake in my develop?
    Could you help me please?
    Thanks & Best Reggards.

    Hi Monica,,
    The issue might be related to cache, please run the full cache refresh. also check the sap note1312182.
    regards,
    Harish

  • Business systems  for Soap to file scenario

    Hi Experts,
       I am working on a soap to file scenario.Which type of business systems shall i  create i.e Third party,As ABAP,As Java etc.Please suggest.
    Thanks
    Veeru

    Hi,
    Normally Business systems are created in SLD when you are provided with relevant system details. A business service is used in case of the system being an abstract unit.
    In your case, it is better to go for Business service because you generally don't  have such details for third party system.
    Just go through this link for more understanding...
    Difference between Business System and Business Service
    Regards,
    Chandra

  • Doubt Regarding SOAP to File Scenario

    Hi All,
    I am trying to create a SOAP to File scenario .These are the following things I have done so far :
    IR -  2 datatypes ( 1 for soap message and 1 for file message )
           2 message types for the corresponding messages
          2 Message interfaces, both are asynchronous
          1 message mapping
          1 interface mapping
    ID- 2 business systems (1 to send soap, 1 to recieve file )
        2 communiccation channel (soap sender, file receiver )
    soap sender adapter parameters - Interface Name  - Message interface for soap message
                                                      interface namespace - scenario namespace
    Then,  i generated a wsdl file to expose the outbound message interface for soap message as a web service, url for message interface : http://host:port.XISOAPAdapter/MessageServlet?:service:channel.
    After generating the wsdl file, i imported it in external definition
    Could anyone plz. tell me, is this the right approach to creat this scenario ? how can I test this scenario?using altova spy ?

    Hi,
    The URL you have mentioned to genarate WSDL is not a valid one
    http://host:port.XISOAPAdapter/MessageServlet?:service:channel.
    Check the below valid URL
    http://host:port/XISOAPAdapter/MessageServlet?channel=:service:channel.
    You no need to import this to the Eexternal Definition as you already have DT,MT and MI, Any way this dosn't make any difference.
    You can use SOAPGUI Tool to test:
    ->Create New Project -> provide WSDL you have genarated.
    ->Select Request and provide username and password and click the green button on top(Submit request to end URL).
    Using altova spy:
    Select SOAP Menu->Create New SOAP Request and provide your WSDL file and
    SOAPMenu->Send Request To Server
    Then you will get response..
    Regards,
    Prasanna

  • Testing of SOAP to FILE Scenario

    Hi all
    I have done with SOAP to FILE scenario.
    --> while defining web service what we need to give in the URL????
    --> How to test this SOAP to FILE scenario to see wheather it is working fine or not, what are the all options
    Thanks
    Dheeraj

    Hi Dheeraj,
    Definitely you can test it through the microsoft infopath tool.
    steps to follow:
    Executing wsdl File Using Microsoft Info Path
    1.>Click on the design a from template
    2.>Select the Web service icon and click ok
    3.>Select the radio button u2018receive and submit datau2019 and click on next.
    4.>Enter the path of the generated wsdl which u have saved and click next.
    5.>Select the interface and   click next
    6.>Select the interface and   click next. 
    7.>Double click on parameters.
    8.>Double click on the parameter (which you want to send as request). Then click on the query field and click ok.
    9.>Click next. And click Finish
    10.>Now drag the query fields on the data fields to the left side. And click preview.
    Please follow these steps I hope you will be able to test it.
    Thanks and regards,
    Nutan

  • Soap to File Scenario with BPM

    Hi Guys
    I have create my Soap to File Scenario using BPM to split the file on "Transformation step" into 7 files and it must save these files to my FTP Server, when testing on sxmb_moni I don't get any errors but when checking on the FTP server no files are created, and I understand that it should be showing all seven processing on the sxmb_moni, but that is not happening.
    I have used the ForEach mode on my Block.
    What could I be doing wrong.
    Thanks!!
    Yonela

    go to runtime work bench to see communication channel, especailly the receiver channel.
    To see what happened on it

  • Soap to file

    Hi All,
    I would like to work on Soap to File scenario(model).
    Soap message is availbale in XML file.that i need to send as file to target system.
    I'm unable to find any file picking option in soap adapter.
    If i'm doing wrong approach could any one suggests me to do this scenario.
    Thanks and regards,
    venu.

    Hi Venu,
    I think i will give you some more information about SOAP adapters,So Please go through the link below and follow the steps mentioned in it while defining the web service.Then you will get to know the actual use of a SOAP adapter.
    <a href="http://help.sap.com/saphelp_erp2004/helpdata/en/31/daa0404dd52b54e10000000a1550b0/content.htm">Defining Web Services</a>
    Sending a Simple SOAP envelope to XI via HTTP using ASP
    https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1442 [original link is broken]
    More links for SOAP Adapter:
    /people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/fdca3f01f33e1ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
    You can create SOAP Request from WSDL using the following tool.
    http://www.gotdotnet.com/Community/UserSamples/Details.aspx?SampleGuid=65a1d4ea-0f7a-41bd-8494-e916ebc4159c
    You've to expose your outbound message interface as a WSDL which can be used by say EP.
    Also go thru the following threads
    Re: WebService
    Re: SOAP Client for Synchronous Scenario
    Re: How to test a webservice as a standalone?
    Regards,
    abhy

  • Where do i get soap.jar file to download from ?

    I am writing a SOAP client class in java and am looking for a place where I can download soap.jar file.
    Can somebody inform where it is.
    Thanks

    Hi.
    You can download the SOAP stuff from http://xml.apache.org/soap/ under the 'Download' link.
    Regards,
    Lance
    Lance Walton - [email protected]
    Team In A Box - Software without Tragedy
    http://www.teaminabox.co.uk

  • How to proceed with File to SOAP to File

    Hi,
         I am going to do File to XI to SOAP to File scenario.....
    I want to send the response as is the request.... For this i think so mapping is not required, as request and response are same.
    Could you please guide me.....
    1) How many datatypes to create
    2) How many Message types to create
    3) How many Message interfaces to create, how many abstract interfaces required
    4) Is mapping required
    5) What are the step involved in creating BPM
    and regarding Integration Directory
    1) how many bussiness services requred
    2) how many communication channels required
    3) how many receiver determinations,interface determinations, receiver agreement s and sender agreements required....
    Regards,
    Pushparaju.B

    Hey
    its like a simple File to File scenario,u just need to generate webservice in ID and have to consume it somewhere(u can check it using ALTOVA XMl SPY),as its not possible to do a synchronous scenario wid file adapters,u have to use BPM ,refer ro this blog for BPM
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    i did the same scenaro yesterday,mine waz just asynchronous(without BPM).
    lemme know if u need any more help.
    you can have a look at the followin scenario as well
    /people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
    thanx
    ahmad
    Pl:Reward with points for helpful answers
    Message was edited by:
            Ahmad

  • To download SOAP/XML file at runtime....

    Hi,
      My porgram is consuming a web service, provided by an external party, by calling the method of the corresponding proxy class. The problem is I want to capture the SOAP/XML file that is generated at runtime when the proxy method is called.
    Could you please suggest me a way by which I can download the XML file. Is it possible?
    Regards,
    Vara

    Hi Vara,
    One solution is to activate logging and tracing and to see the payload in the log viewer. Consider that this could lower the performance of the system.
    Another solution could be to use some kind of [packet analyzer|http://en.wikipedia.org/wiki/Packet_sniff] ...
    Hope this helps,
    Rossen

  • File to SOAP and SOAP to File (Synchronous)

    Hi,
    Can anybody advice me how to do the File to SOAP and SOAP to File with Synchronous call.
    Thanks,
    Naidu.

    Hi,
    Use this blog
    RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
    and create an inbound synchronous interface for soap receiver structure. provide request and response structure in it.
    Thanks!

  • SOAP to FILE using BPM to catch exception and save error into the table

    Hi All
    My scenario SOAP to FILE using BPB is working fine but now I have a requirement to catch an exception if something wrong happened on a runtime and save it into the tracking table, is that possible, if it is please point me to the similar step by step scenario.
    Thanks in advince,
    Yonela

    Yonela:
    As your original requirement is to save the eorr data into your database table, however, you was mis-leaded to alerting field.
    You are using BPM now, then that is the reason that I suggested to use excpetion branch.
    It does not matter SOAP to File seneario, it does not have to be SAP - RFC scenario, your BPM willl interact with database system.
    First you have block which include all the steps that possible generate exception: like Transformation step, and your final Aync send step (which will send data to file).
    Secondly, define a exception handler for that block.
    3. Modify each steps that posssible generate exception: e.g. transformation step, send step, add exception handler to them.
    4. Create exception branch in side the block
    5. Add another send step inside your exception branch, which will call RFC, RFC will write data to your table.
    6. If you want, you can add a control step in exception branch to trigger a alert, or terminate current process.
    At run time, any steps that trigger exeption,will cause your exception branch executed, and RFC will be called to insert data into your database table.
    Regards
    Liang

Maybe you are looking for