SoapFaultCode:1"Consume web service in ABAP proxy
Hi,
All while trying to execute the web service in ABAP i am getting the following error: SoapFaultCode:1".
When i used tcode ST11, i found it is giving the following error trace:
XRFC>
XRFC> E HTTP_TRANSPORT_BINDING 20091202120425.2099810 : CL_SOAP_HTTP
XRFC> TPBNDROOT ->HANDLE_STATUS_CODE Received return code 500 (
XRFC>
XRFC>
XRFC> E SOAP_RUNTIME 20091202120425.2897590 : CL_SOAP_RUNTIME_CLIENT
XRFC> ->EXEC_PROCESSING SOAP Fault Exception caught: : System.Web
XRFC> .Services.Protocols.SoapHeaderException: SOAP header To was not
XRFC> understood.#
Can anyone please help with this?
Hi
1.- check adding the host of the Service to your etc\hosts file unix case, or your DNS in case you have one.
2.- Add the SOAP Action in the Logical Port Config (Obtain it from the WSDL info).
Hope this help,
Greetings.
Similar Messages
-
Get error "SoapFaultCode:1"Consume web service in ABAP proxy
Hi All,
I created a proxy and logical port to consume a BOBJ Data Service' webservice, when I tested the proxy I get exception:
SoapFaultCode:1 without further more information.
the wsdl is @ http://nspad372.dmzpal.sap.corp:8080/DataServices/servlet/webservices?ver=2.1&wsdlxml
and the endpoint of that webservice is@ http://cnst50052835:8080/DataServices/servlet/webservices?ver=2.1
By using SOAPUI I can successful call that webservice, but with ABAP proxy not. Can someone give me a help?
thanks& bst regards,
BinHi
1.- check adding the host of the Service to your etc\hosts file unix case, or your DNS in case you have one.
2.- Add the SOAP Action in the Logical Port Config (Obtain it from the WSDL info).
Hope this help,
Greetings. -
Consume web service in ABAP proxy with SOAP header
Hi Thomas ,
I am trying to consume web service in ABAP . I have followed the procedure from one of your web blog <a href="/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap a Developer's Journal Part XIV - Consuming WebServices with ABAP</a> . (640 release).
I need to pass SOAP header along with SOAP body. As you mentioned I have used if_wsprotocol_ws_header interface to pass header but it is still failing.
Please see below code and please give some direction to fix the issue.
1.Create ABAP proxy for WSDL (http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL). It has created structures only for SOAP body.
2.Create Logical port
3.Create following program to call proxy
REPORT zproxy.
DATA: ref_stock TYPE REF TO zzco_stock_quotes_soap ,
ws_header TYPE REF TO if_wsprotocol_ws_header,
name TYPE string,
namespace TYPE string.
TRY.
CREATE OBJECT ref_stock
get WS_HEADER protocol
ws_header ?= ref_stock->get_protocol('IF_WSPROTOCOL_WS_HEADER').
set somehow header as iXML-DOM tree
DATA: ixml TYPE REF TO if_ixml,
xml_document TYPE REF TO if_ixml_document,
xml_root TYPE REF TO if_ixml_element,
xml_element TYPE REF TO if_ixml_element,
xml_node TYPE REF TO if_ixml_node.
DATA l_xstring TYPE xstring.
DATA l_string TYPE string.
FIELD-SYMBOLS <fs_xstring> TYPE xstring.
Additional Header:
CONCATENATE
'<soap:Header>'
'<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">'
'<s1:RegisteredUser>'
'<s1:UserID>[email protected]</s1:UserID>'
'<s1:Password>aaaaaaaa</s1:Password>'
'</s1:RegisteredUser></s1:LicenseInfo>'
'</soap:Header>' INTO l_string.
convert to xstring
l_xstring = cl_proxy_service=>cstring2xstring( l_string ).
IF NOT l_string IS INITIAL.
create iXML DOM document from XML xstring
CALL FUNCTION 'SDIXML_XML_TO_DOM'
EXPORTING
xml = l_xstring
IMPORTING
document = xml_document
EXCEPTIONS
invalid_input = 1
OTHERS = 2.
IF sy-subrc = 0 AND NOT xml_document IS INITIAL.
xml_root = xml_document->get_root_element( ).
xml_element ?= xml_root->get_first_child( ).
add header element by element to SOAP header
WHILE NOT xml_element IS INITIAL.
name = xml_element->get_name( ).
namespace = 'http://swanandmokashi.com' . "xml_element->get_namespace_uri( ).
IF NOT xml_element IS INITIAL.
ENDIF.
ws_header->set_request_header(
name = name
namespace = namespace
dom = xml_element ).
xml_element ?= xml_element->get_next( ).
ENDWHILE.
ENDIF.
ENDIF.
CATCH cx_ai_system_fault .
ENDTRY.
*Call soap body using abap proxy class.
DATA: get_quotes TYPE zzget_quotes_soap_out .
DATA: get_quotes1 TYPE zzget_quotes_soap_in .
get_quotes1-quote_ticker = 'GE'.
TRY.
CALL METHOD ref_stock->get_stock_quotes
EXPORTING
get_quotes1 = get_quotes1
IMPORTING
get_quotes = get_quotes.
CATCH cx_ai_system_fault .
CATCH cx_ai_application_fault .
ENDTRY.
4.It is throwing cx_ai_system_fault error.
SOAP details:
Input:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:enc="http://schemas.xmlsoap.org/soap/encoding" >
<soap:Header>
<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">
<s1:RegisteredUser>
<s1:UserID>[email protected]</s1:UserID>
<s1:Password>aaaaaaaa</s1:Password>
</s1:RegisteredUser>
</s1:LicenseInfo>
</soap:Header>
<soap:Body>
<tns:GetQuotes xmlns:tns="http://swanandmokashi.com">
<tns:QuoteTicker>GE</tns:QuoteTicker>
</tns:GetQuotes>
</soap:Body>
</soap:Envelope>
Thanks,
Kavitha.Hi ,
Thank you for the response. Did you passed user email and password ([email protected] /aaaaaaaa) part of licenseinfo->resisteredUser along with Quoteticker GE in analyzer?
<a href="http://www.strikeiron.com/Analyzer/OnlineAnalyzer.aspx?WSDL=http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL">ANALYZER</a>
Thanks,
Kavitha. -
Pros & Cons for consuming web services in ABAP using ABAP PROXY
Hi,
Other then performence is there any other disadvantages like security,etc for consuming web services in ABAP using ABAP proxy?
I really appreciate if some one provide the more details(Pros & Cons ) regarding cosuming web services and I also want to know is there any other way to consume web services in ABAP.
Thanks.<i> is there any other way to consume web services in ABAP</i>
you can use cl_http_client class to make your program to act as http client and post the soap message too webservice. This way you dont need to generate proxy, but you should know the soap message format.
Regards
Raja -
Windows authentification while consuming web service from ABAP
Hi All,
We are consuming web service from ABAP, we have created client proxy in SE80 and configured logical port in LPCONFIG.
This one was working fine. Now we have added windows user authentification to access this service.
Now when I'm trying to regenerate this proxy in R/3 it is asking for user and password. When I enter these details this one is not working.
If I access this service direcly from internet explorer and I enter same user and password then I would able to access this service.
Could you please let me know how to handle this.
Regards
VikramThe dialog that is produced by HTTP Destination object of the logical port is designed only for use within Classic Dynpro applications. There is no prompt produced when running in Web Dynpro. If possible assign a generic user within the logical port definition and this will be used automatically by all users.
-
Consuming Web Services with ABAP - WSDL
Hi All,
I Want to consume web service in abap, i found lot of documents,Here i am having data in the internal table i need to pass
it to wsdl file, The Web Service or Proxy generates a WSDL file. So this WSDL file can be consumed on ABAP Front and Encrypt the Data that is to be sent to the Banks.
I found the input and output, Where i can find the method generated or we need to create it
CALL METHOD io_clientproxy->XXXXXXXXXXXX
please let me have your valuable ideas
Thanks in advance,
Arun.Hi Miguel,
I have not heared about SPROXY, Here i found some code,which calls a web service method and where it is from.
when i double click on my proxy it shows me some method.IF_PROXY_BASIS_INTERNAL~CREATE_FRAMEWORK
this is the one web service method. and i meed to pass the internal table data to WSDL file.
*-- create web service proxy class instance
TRY.
CREATE OBJECT io_clientproxy
EXPORTING
logical_port_name = 'LP4'.
CATCH cx_ai_system_fault.
ENDTRY.
*-- call web service methods
TRY.
CALL METHOD io_clientproxy->get_airport_information_by_is
EXPORTING
input = input
IMPORTING
output = output.
CATCH cx_ai_system_fault.
CATCH cx_ai_application_fault.
ENDTRY.
*-- text processing
output_string = output-get_airport_information_by_is.
REPLACE ALL OCCURRENCES OF
'<' IN output_string WITH '<' .
REPLACE ALL OCCURRENCES OF
'>' IN output_string WITH '>' .
REPLACE ALL OCCURRENCES OF
'xmlns=' IN output_string WITH 'xmlns:xsl=' .
*-- parsing
TRY .
CALL TRANSFORMATION ('Y_AIRPORT_XML2ABAP')
SOURCE XML output_string
RESULT outtab = outtab.
CATCH cx_xslt_exception INTO xslt_err.
DATA: s TYPE string.
s = xslt_err->get_text( ).
WRITE: ': ', s.
STOP.
ENDTRY .
Regards,
Arun. -
Code for consuming web services in ABAP
*& Report ZVM_GET_CITY_TIME
REPORT zvm_get_city_time.
PARAMETERS:
p_city TYPE zget_city_time_soap_in-city.
DATA:
cl_proxy TYPE REF TO zco_time_service_soap,
input TYPE zget_city_time_soap_in,
output TYPE zget_city_time_soap_out,
systerr TYPE REF TO cx_ai_system_fault,
w_error TYPE c.
TRY.
CREATE OBJECT cl_proxy
EXPORTING
logical_port_name = 'ZCO_TIME_SERVICE_SOAP'.
CATCH cx_ai_system_fault.
CREATE OBJECT systerr.
WRITE:/ 'Error in creating object - ', systerr->errortext.
ENDTRY.
TRY.
input-city = p_city.
CALL METHOD cl_proxy->get_city_time
EXPORTING
input = input
IMPORTING
output = output.
CATCH cx_ai_system_fault.
CREATE OBJECT systerr.
WRITE:/ 'Error in calling the method - ', systerr->errortext.
w_error = 'X'.
ENDTRY.
CHECK w_error NE 'X'.
SKIP.
WRITE:/ 'The current time in ', p_city, ' is ',
output-get_city_time_result.<i> is there any other way to consume web services in ABAP</i>
you can use cl_http_client class to make your program to act as http client and post the soap message too webservice. This way you dont need to generate proxy, but you should know the soap message format.
Regards
Raja -
How to consume Web Services form ABAP ?
Hi,
Please advise how to consume web services from ABAP Code ? is there any automatic generating proxy class in order to consume web services ?
I am using NW 7.0 SP15
Thank You and Best Regards
Fernand LesmanaHi Fernand,
chk out for this link
Consume an ABAP Webservice (WAS 620) from .Net
Send SMS to India from ABAP
working web service from ABAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a4433436-0301-0010-f2a9-9281ad574054
Regards
Sampath -
How to consume WEB SERVICES from ABAP ??
Q: How to consume WEB SERVICES from ABAP program??
the point here is i am using SAP release 620 and the creation of proxy is out of scenario
and also no XI. Its only through ABAP program i need to consume one web service (its a HTTPS one ),
Using cl_http_client... i tried it but i am totally confused of whats happening ???
Req some senior ppl advice on the same/approach.
any hints will suffice my way of approach...!!!
Please do put in your valuable advices..!!
Thanks in advance..!!!!Hello Srinivas,
Following is the code for calling web service:
data: client type ref to if_http_client,
host type string value 'server url',
service type string value '8080',
path type string value '/sap/public/ping',
errortext type string,
proxy_service type string,
scheme type i value 1.
call method cl_http_client=>create
exporting host = host
service = service
proxy_host = host
proxy_service = service
scheme = scheme
importing client = client
exceptions
argument_not_found = 1
internal_error = 2
plugin_not_active = 3
others = 4.
case sy-subrc.
when 0.
write 'Server reached successfully'.
when others.
write: 'sy-subrc =', sy-subrc.
endcase.
Once you got the client object you can call following methods:
"Set the requrie URL for the web service you want to call. This is not WSDL anyway!!
cl_http_utility=>set_request_uri( request = client->request
uri =' url 2 be called ').
*Then you can call send method with proper inputs for sending request to WS
CALL METHOD client->send
Then you can use receive method for getting the response
CALL METHOD client->receive
*You can get last error in case of exceptions
CALL METHOD cl_http_client=>get_last_error
*Close the client object
CALL METHOD client->close
For more information on full code refer my link in previous replay.
Thanks,
Augustin.
Edited by: Augustarian on Aug 18, 2009 1:49 PM -
Unallowed RFC-XML Tag (SOAP_EINVALDOC) - Web Service using ABAP Proxy
Hi there
I am trying to consume a Web Service using ABAP Proxies. I have done the following in the system:
I configured the HTTP and HTTPS Proxy settings.
I created a package with package interfaces SAI_TOOLS and SAPPINT included under the Use Access tab.
I created the proxy classes by using the WSDL provided by the system I'm trying to interface with.
I created my HTTP destination RFC via SM59.
I configured a logical port for the proxy.
I developed the ABAP code for calling the proxy.
In the code the exception CX_AI_SYSTEM_FAULT gets raised with error message <b>"Unallowed RFC-XML Tag (SOAP_EINVALDOC)"</b> when I call the method for passing data to the destination system in the proxy class.
I had a look at SM21 and the following message was written in the log:
<b>"SOAP Runtime: SOAP Runtime exception: 111 occurred in method XP_READ_TAG of class CL_SOAP_XP at position 1
SOAP Runtime: Exception message: Unallowed RFC-XML Tag (SOAP_EINVALDOC)"</b>. I also looked at SAP Note 919886 which states that it can be dumps in the system, missing configuration or the path prefix of the RFC destination that is incorrect. I cannot find any ST22 entries. The trace file looks as follows:
SAP System ID: DGH
Client: 009
User: COLESKG
System time: 072910
System date: 20070531
SAP Release: 700
Host: hd307c
Operating system: AIX
DB System: ORACLE
Program: ZUK_IPA00003
Processing State: 0
Location: Client
Transport Binding: http://schemas.xmlsoap.org/soap/http
SOAP Application: urn:sap-com:soap:runtime:application:client
SOAP Runtime Protocol: http://www.sap.com/webas/630/soap
/runtime/protocol
SOAP Protocols: <initial>
Request Message: <initial>
Response Message: <initial>
Fault: <initial>
Registry: <initial>
SOAP Roles: <initial>
Trace Level: 3
Logging Level: 2
Monitoring Level: 0
Security Profile: <initial>
WS Security Protocol: <initial>
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Try to create client application for Proxyclass:
ZES_CO_PROCESS_EMPLOYEE_BATCH LP name: DEFAULT
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Client application created
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Try to initialize client application
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->IF_SOAP_APPLICATION_CS~INIT() Try to initialize application
urn:sap-com:soap:runtime:application:client
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Create new runtime CL_SOAP_RUNTIME_CLIENT
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->REGISTER_APPLICATION() Try to register application
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->REGISTER_APPLICATION() Application registered
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Read type of transport binding from
configuration
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Create new transport binding type
http://schemas.xmlsoap.org/soap/http
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~INIT() Try to initialize
http://schemas.xmlsoap.org/soap/http
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~INIT() http://schemas.xmlsoap
.org/soap/http initialized
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~REQUEST() Try to create request message
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~REQUEST() Request message created
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~RESPONSE() Try to create response message
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~RESPONSE() Response message
created
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Try to initialize
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Check transport binding
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Create runtime protocol
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Try to initialize SOAP Runtime-intrinsic
Protocol as SENDER with Priority 5
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Try to create trace header/part
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Trace header/part created
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Try to create logging header/part
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Logging header/part created
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Protocol initialized
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT()
Initialized
INFO 07:29:10: SOAP Protocol CL_SOAP_PROTOCOL_FACTORY->CREATE()
Try to create instance for http://www.sap.com/webas/630/soap
/runtime/session/protocol::http://www.sap.com/webas/630/soap
/runtime/session/protocol/srt640_impl
INFO 07:29:10: SOAP Protocol CL_SOAP_PROTOCOL_FACTORY->CREATE()
Instance of CL_SOAP_SESSION_PROTOCOL created for http://www.sap.com/webas/630/soap/runtime/session/protocol::http://www.sap.com/webas/630/soap/runtime/session/protocol/srt640_impl
INFO 07:29:10: SOAP SESSION Protocol CL_SOAP_SESSION_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Try to initialize SOAP Session Protocol
as SENDER with Priority 5
INFO 07:29:10: SOAP SESSION Protocol CL_SOAP_SESSION_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Protocol initialized
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT_GEN->CONFIGURE_FEATURES() Try to configure features
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_CLIENT_BY_DESTINATION() Try to
create ICF Client for DESTINATION = ALSB
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_CLIENT_BY_DESTINATION() ICF
Client created by DESTINATION
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_DESTINATION_URL_PATH() Set
DESTINATION PATH = /SapHRSmartIntegrationWeb/processes/ProcessEmployeeBatch.jpd
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT_GEN->CONFIGURE_FEATURES() Features configured
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->IF_SOAP_APPLICATION_CS~INIT() Application urn:sap-com:soap
:runtime:application:client initialized
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Client application initialized
Trace file opened at 20070531 073030 GMT SAP-REL 700,0,95
Error in module XMLParserGetNextElement:773
Id @(#) $Id: //bas/700_REL/src/krn/rfc/xrfcpars.c#2 $
Unallowed RFC-XML Tag
Error in module XMLConverterReadTag:3061
Id @(#) $Id: //bas/700_REL/src/krn/rfc/xrfccnvrt.c#5 $
Unallowed RFC-XML Tag(24)
Error in module ab_soap:4392
Id @(#) $Id: //bas/700_REL/src/krn/rfc/abxrfccal.c#2 $
failed with return code 1
It then must be something in the config. Has anyone got any idea why this message is encountered?
Kind Regards
Gustav Coleske
Message was edited by:
Gustav ColeskeHi,
I have the same problem as described.
Can you give me a little more information about the error you have solved in the proxy.
Thanks for help
John -
HI
I am consuming web service WSDL file in ABAP using client proxy concept. But every time i execute the program system is
asking for portal user name and pwd. where can i put user name an pwd so that system can take it directly from there
during run time.
Regards,
Shyam.Yes,
There is a place in SOAMANAGER to put userid and pwd for portal user. and this works.
Thanks,
Shyam -
Consuming Web Service from ABAP Web Dynpro
I have written program to consume KM Web Service through ABAP as well as ABAP Dynpro in SAP R/3 by calling Consumer Proxy.
When I run the program from SE38, it prompts me for user-id & password. If I pass KM Server user-id and password I am able to execute the web service successfully.
However, while I execute the same code through Web Dyn-pro , it does not ask for user-id and password & terminates with CX_AI_SYSTEM_FAULT : SOAP:1,007 SRT: Unsupported xstream found: ("HTTP Code 401 : Unauthorized")
I have created a Logical Port in R/3 & I am using this Logical Port while creating an Object of Consumer Proxy.
Kindly let me know how to resolve this issue.The dialog that is produced by HTTP Destination object of the logical port is designed only for use within Classic Dynpro applications. There is no prompt produced when running in Web Dynpro. If possible assign a generic user within the logical port definition and this will be used automatically by all users.
-
How to consume Web Service in ABAP WebDynpro
Hi
I want to know the entire details about how to consume Web Service in WebDynpro application.
regards
PiyushhI piyush,
Have a look at this Blog by Thomas Jung.
/people/thomas.jung/blog/2007/12/17/consuming-services-with-abap
on consuming webservies thru webdynpro ABAP
Cheers
Mary -
To consume web service in ABAP is it required that server should be XI.
Hi ,
I am trying to connect to a webservice from netweaver 7.0 systemand it gives an error " Not configured as integration engine". Is it required to have integration engine to consume web service.
SanjayHi Sanjay
You can consume webservices in ABAP but its better to use XI in mid to avoid point to point communication. Using XI you can have a central hub for all services you consume or publish
Check this link as well
BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
Thanks
Gaurav -
Problem at Consume WEB Service in ABAP
hello!!
I tell them my problem, is to create a web service from the SE80, which could be used properly.
Then there was a change of server, which migrated to the developments and the web service is recreation, but this can not be consumed.
now I need help, is where do I indicate that the basis so that they can return to consume web services, what services or settings should be activated.
any suggestion or help are welcome.
The ECC system is a 5 AS ABAP only.
from now, I appreciate any help or guidance I can get.What is the problem? Are all the services active in SICF for web services and how is the web service being consumed is it through a wsdl file ?
Maybe you are looking for
-
Session Time Out For UNLOGGED IN USER During Search -pls help SIR!
Hi, The problem lies in searchresultscontroller.java/searchcontroller.java file under search/web/handler of an application that supports educational note sharing. The problem is that - When I search with query strings in different fields(as you will
-
I have problems installing premier elements 12. can somebody help me?
can somebody help me?
-
Airport extreme not compatible with xbox live?
Hello, Ive had this problem for a long while now and are getting desperate. Basically when i go on xbox live the connection is really really bad. It's not all the time, rarely it will work fine but most of the time the connection is awful. I know the
-
Installing CFC Extension on CFBuilder 2
Hi, I'm trying to install the Adobe CFC Generator in my ColdFusion Builder 2... Scene: - Remote Server with ColdFusion 9 Currently I am following a Adobe tutorial but it still fails for me... Steps: - In extensions, I had clicked in "Insta
-
T530 Will not Boot and Locks up
Hello, I have a Lenovo T530 and have already had Lenovo replace the hard drive once in May of 2013. The machine has worked well since then. However, yesterday I closed my screen to put it into hibernation mode and upon startup my desktop icons all di