SOAPUI to Oracle UCM error
Hi ,
When i try to check in a file using soapui to oracle ucm the file is successfully checked in but am not able to view the file in ucm . I get the below error
"Error in a subsystem. An error occurred when loading an image for translation.
To download and view locally, use the Download menu item from the File menu of the Viewer"
There must be a issue with file content value . Can some one help me with this
Hi FahdMirza ,
I have permission . I am able to check in the document . The issue is with the conversion . Oracle ucm is not able to convert the file . please find the soap message below .
can you help me with the value i have to put here "<chec:fileContent>cid:38514290048</chec:fileContent>"
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:chec="http://www.stellent.com/CheckIn/">
<soapenv:Header/>
<soapenv:Body>
<chec:CheckInUniversal>
<!--Optional:-->
<chec:dDocName>wms1</chec:dDocName>
<!--Optional:-->
<chec:dDocTitle>wms</chec:dDocTitle>
<!--Optional:-->
<chec:dDocType>Application</chec:dDocType>
<!--Optional:-->
<chec:dDocAuthor>weblogic</chec:dDocAuthor>
<!--Optional:-->
<chec:dSecurityGroup>IPMSYS_APP_1</chec:dSecurityGroup>
<!--Optional:-->
<chec:dDocAccount></chec:dDocAccount>
<!--Optional:-->
<chec:CustomDocMetaData>
<!--Zero or more repetitions:-->
<chec:property>
<!--Optional:-->
<chec:name>?</chec:name>
<!--Optional:-->
<chec:value>?</chec:value>
</chec:property>
</chec:CustomDocMetaData>
<!--Optional:-->
<chec:primaryFile>
<!--Optional:-->
<chec:fileName>E:\test\Jellyfish.jpg</chec:fileName>
<!--Optional:-->
<chec:fileContent>cid:38514290048</chec:fileContent>
</chec:primaryFile>
<!--Optional:-->
<chec:alternateFile>
<!--Optional:-->
<chec:fileName>?</chec:fileName>
<!--Optional:-->
<chec:fileContent>cid:424986047390</chec:fileContent>
</chec:alternateFile>
<!--Optional:-->
<chec:extraProps>
<!--Zero or more repetitions:-->
<chec:property>
<!--Optional:-->
<chec:name>?</chec:name>
<!--Optional:-->
<chec:value>?</chec:value>
</chec:property>
</chec:extraProps>
</chec:CheckInUniversal>
</soapenv:Body>
</soapenv:Envelope>
Similar Messages
-
Hi,
I am using oracle UCM repository for the content management and its inbuid web form editor for creating HTML content.
but when i am trying to insert image, it gives some 'server didn't send back a proper XML response' error.
can anybody please help me on the same.See if this helps:
http://cksource.com/forums/viewtopic.php?t=6642&f=5 -
Oracle UCM doesnot open after it is getting installed -- please help
Hi All,
I am getting a typical error in which the oracle - ucm content server fails to open after getting installed. I am using the DB2 database, what can be the cause for this issue am unable to understand. Please find below the logs corresponding to this process:-
Host url: localhost(since we are locally installing Oracle UCM in my system)
Port:50000(db2 port )
ERROR- LOGS
NOTICE: Install logging initialized at 10/12/12 4:36 PM.
NOTICE: Installing master server.
NOTICE: Installing with Java version 1.5.0_11.
NOTICE: Install logging initialized at 10/12/12 4:37 PM.
NOTICE: Finished install type QueryConfiguration at 10/12/12 4:37 PM.
NOTICE: Install logging initialized for C:/DB2/UCM/install/2012-10-12-new.txt at 10/12/12 4:49 PM.
NOTICE: Unable to connect to database. Installation will fail.
ERROR: Unable to initialize the database 'InstallerDatabase'. Unable to load driver com.ibm.db2.jcc.DB2Driver. com.ibm.db2.jcc.DB2Driver
NOTICE: Install logging initialized for C:/DB2/UCM/install/2012-10-12-new.txt at 10/12/12 4:50 PM.
ERROR: Unable to initialize the database 'InstallerDatabase'. Unable to load driver com.ibm.db2.jcc.DB2Driver. com.ibm.db2.jcc.DB2Driver
ERROR: Unable to create database tables. You will have to create them manually.
NOTICE: Successfully installed 'ActiveDirectoryLdapComponent' component
NOTICE: Successfully installed 'ArchiverReplicationExceptions' component
NOTICE: Successfully installed 'CheckoutAndOpenInNative' component
NOTICE: Successfully installed 'CheckSCSHealth' component
NOTICE: Successfully installed 'CIS_Helper' component
NOTICE: Successfully installed 'ConfigMigrationUtility' component
NOTICE: Successfully installed 'FileStoreProvider' component
NOTICE: Successfully installed 'FormEditor' component
NOTICE: Successfully installed 'InboundRefinerySupport' component
NOTICE: Successfully installed 'ProxyConnections8' component
NOTICE: Successfully installed 'CoreWebdav' component
NOTICE: Successfully installed 'WebUrlMapPlugin' component
NOTICE: Successfully installed 'WsdlGenerator' component
NOTICE: Successfully installed 'DBSearchContainsOpSupport' component
NOTICE: Successfully installed 'UserProfileSchemaLoader' component
NOTICE: Successfully installed 'FCKEditor' component
NOTICE: Successfully installed 'NativeOsUtils' component
NOTICE: Successfully installed 'ContentAccess-win32' component
NOTICE: Successfully installed 'ComponentTool' component
NOTICE: Successfully installed 'CoreUserInterfaceLibrary' component
NOTICE: Successfully installed 'Localization' component
NOTICE: Successfully installed 'SecurityProviders' component
NOTICE: Successfully installed 'PopUpCalendar' component
NOTICE: Successfully installed 'YahooUserInterfaceLibrary' component
NOTICE: Successfully installed 'iTextComponent' component
NOTICE: Installing shortcuts
WARNING: Unexpected exception: Unable to initialize the system provider 'SystemDatabase'. Unable to initialize the database 'SystemDatabase'. Unable to load driver com.ibm.db2.jcc.DB2Driver. com.ibm.db2.jcc.DB2Driver
WARNING: Unable to publish user database.
WARNING: Unable to register with Administration Server.
WARNING: Unable to start server at C:/DB2/UCM/.
WARNING: C:/DB2/UCM/shared/os/win32/bin/NtProcCtrl.exe start IdcContentService DB2
WARNING: Unable to open the service handle.
WARNING: The service does not exist on the specified computer.
WARNING: Unable to start server at C:/DB2/UCM/.
WARNING: C:/DB2/UCM/admin/bin/NtProcCtrl start IdcAdminService DB2_admin
WARNING: Unable to open the service handle.
WARNING: The service does not exist on the specified computer.
NOTICE: Finished install type Install with warnings and with errors at 10/12/12 4:56 PM.
Thanks and Regards
DebDownload iTunes 11 from the Apple site and reinstall. The error message was quite plain in telling you what to do to resolve the error.
-
Oracle UCM - Unable to get dynamic conversion.
Hi all,
I'm new with Oracle UCM 11g and I encountered problems trying to check in a word document into UCM for this dynamic converter feature.
I have tried creating a Classic HTML Conversion Template and HTML Conversion Template, but when I tried clicking on the HTML link, I got this error:
Unable to get dynamic conversion. The html export was not successful.
10:54 PM Event generated by user 'weblogic' at host '192.168.163.37:16200'. Referred to by http://192.168.163.37:16200/cs/idcplg?IdcService=DOC_INFO&dID=13606&dDocName=ECM010404.
User agent is Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; .NET4.0C) and request method is GET.
The html export was not successful. [ Details ]
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,weblogic,192.168.163.37:16200!csFileServiceReferredToBy,http://192.168.163.37:16200/cs/idcplg?IdcService=DOC_INFO&dID=13606&dDocName=ECM010404!csFileServiceUserAgent,Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; .NET4.0C),GET!csHtmlExportNotSuccessful
intradoc.common.ServiceException: !csHtmlExportNotSuccessful
*ScriptStack GET_DYNAMIC_CONVERSION_SUB
3:doSubService,dID=13606,dDocName=ECM010404GET_DYNAMIC_CONVERSION_SUB,dID=13606,dDocName=ECM0104043:runHtmlConversion,dID=13606,dDocName=ECM010404
at dynamicconverter.DynConverterHandler.doConversion(DynConverterHandler.java:1437)
at dynamicconverter.DynConverterHandler.runHtmlConversion(DynConverterHandler.java:1125)
at sun.reflect.GeneratedMethodAccessor12928.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:533)
at intradoc.server.Service.doCode(Service.java:505)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
at intradoc.server.Service.doAction(Service.java:477)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
at intradoc.server.Service.doActions(Service.java:472)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1322)
at intradoc.server.Service.executeSubServiceCode(Service.java:3866)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:1200)
at intradoc.server.Service.executeServiceEx(Service.java:3861)
at intradoc.server.Service.executeService(Service.java:3845)
at intradoc.server.Service.doSubService(Service.java:3760)
at sun.reflect.GeneratedMethodAccessor12923.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
at intradoc.server.Service.doCodeEx(Service.java:550)
at intradoc.server.Service.doCode(Service.java:505)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
at intradoc.server.Service.doAction(Service.java:477)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
at intradoc.server.Service.doActions(Service.java:472)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
at intradoc.server.Service.executeActions(Service.java:458)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
at intradoc.server.Service.doRequest(Service.java:1890)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1343)
at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1715)
at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:222)
at sun.reflect.GeneratedMethodAccessor210.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.executeContentServerIntegrateMethodOnConfig(ServletUtils.java:1600)
at idcservlet.IdcFilter.doFilter(IdcFilter.java:352)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Any help is much appreciated. Thank you.
Edited by: 885352 on Sep 15, 2011 2:40 AMHi,
I guess, during installation, you have provided as 127.0.0.1. Do you have entry in host file like (127.0.0.1 localhost).
Try by giving host name or IP address for HttpServerAddress in configuration file.
Gowtham J -
Oracle UCM/IPM Issue - Urgent Solution needed
Hi folks,
Solution needed for the below problem in oracle IPM/UCM cluster .
General Scenario :
The document checked in Oracle UCM can be viewed through IPM Viewer only if the security group of the document is set to a IPM Profile .
The IPM Profile is created in Oracle UCM Configuration Manager Component whenever a application is created in IPMServer .
Issue in Clustering :
IPMApplication created in host 1 is creating profile in UCM Component Manager of host 1 but not in UCM Host2 component manager (Vice Versa).
This affects url generations of checked in documents through proxy since the IPM profile is not available in cluster.
Scenario :
IPM MetaData UCM Component Manager(Profile)
Host1 Host2 Host1 Host2 Host1 Host2
IPM_APP_1 Visible Visible Visible Visible Not Visible
Visible IPM_APP_2 Visible Visible NotVisibe Visiblehi
Error Message is- "Invoiced quantity is greater than mother invoice quantity".
this error means your Depot invoice quantity is high, please check your mother invoice quantity, its means branch invoice quantity , and depot invoice quantity , is deferent so , please check both invoice quantity ,
and also check you migo,
ME21N-VL10B-VL02N-VF01-J1IIN-MIGO-VA01-VL01N-J1IJ-VF01, in this process you can do J1IG , Its process
me21n-vl10b-vl02n-vf01-j1iin-migo-j1ig-va01-vl01n-j1ij-vf01, this is process of depot sales, so please check this process -
Indexing problem in Oracle UCM
Hi,
I am using Oracle UCM repository with Weblogic portal.
When i do re-indexing through UCM console error comes 'Unable to index metadata only.This may indicate the collection is damaged.Indexing is aborted'.
Can anybody please tell any solution for this.Hi
I believe that you might have changed your indexer from metadata to fulltext or OTS and then rebuilding the index is giving you problems. See Metalink Note : Note.748186.1 for issue when one is changing indexer from Metadata to FullText .
In case you are moving to OTS then the only thing needed that needs to be changed in the Note is instead of using IdcColl2 put ots1/ots2 and then save it , restart the CS , rebuild the collection and see if the issue persists.
Hope this helps
Srinath -
Identity Plugin for ORACLE UCM is not getting activated
Hi Team,
I am trying to activate Identity Plugin for UCM with Native user (Oracle UCM user).I am using UCM identity plugin.
While creation of UCM source i have filled information for authorization and thats is given below
HTTP endpoint for authorization http://hddlntdsz11074.HCLT.CORP.HCL.IN:16200/cs/idcplg
Display URL prefix http://hddlntdsz11074.HCLT.CORP.HCL.IN:16200/cs
Administrator user weblogic
Administrator password *****
Display crawled version false
Authorization user ID format username
And security Attributes are
ACCOUNT Grant
DOCSECURITYGROUP Grant
COLLAB Grant
When i am trying to active NATIVE identity Plugin for UCM i have filled below infomartion
http://hddlntdsz11074.HCLT.CORP.HCL.IN:16200/cs/idcplg
Admin User weblogic
Password *****
Error that i m getting in SERVER log is
Loading class...
classname = oracle.search.plugin.security.auth.stellent.StellentAuthManager
classpath = file:///D:\oracle\product\10.1.8\ses1\search\lib\plugins\oracleapplications/StellentCrawler.jar
12/02/24 17:06:57 Loading class...
classname = oracle.search.plugin.security.auth.stellent.StellentAuthManager
classpath = file:///D:\oracle\product\10.1.8\ses1\search\lib\plugins\oracleapplications/StellentCrawler.jar
12/02/24 17:06:57 INFO HTTPThreadGroup-21 getQueryFilterPlugin:username=tempxxx
12/02/24 17:06:57 INFO FlexSecThread-1 StellentQueryFilter.getSecurityValues: secAttributeName=ACCOUNT
12/02/24 17:07:07 WARN HTTPThreadGroup-21 A security filter authorization timeout for dsid = 22 occurred after 10000 milliseconds. Start time: 17:06:57 263ms End time: 17:07:07 237ms
12/02/24 17:07:09 INFO FlexSecThread-1 Request to http://10.97.192.103:16200/cs/idcplg Succeded with status 200
12/02/24 17:07:09 INFO FlexSecThread-1 *** Stellent Message ***
12/02/24 17:07:09 INFO FlexSecThread-1 ServiceName = SES_GET_USER_ATTRIBUTES
12/02/24 17:07:09 INFO FlexSecThread-1 statusCode = 0
12/02/24 17:07:09 INFO FlexSecThread-1 ResultName = attributeValue
12/02/24 17:07:09 INFO FlexSecThread-1 ResultValue = #none
12/02/24 17:07:09 INFO FlexSecThread-1 statusMessage = null
12/02/24 17:07:09 INFO FlexSecThread-1 StellentQueryFilter.getSecurityValues: secAttributeName=DOCSECURITYGROUP
12/02/24 18:29:43 INFO HTTPThreadGroup-26 ENTERING_METHOD : LNIdentityPluginManager setLocale()
12/02/24 18:29:43 INFO HTTPThreadGroup-26 EXITING_METHOD : LNIdentityPluginManager setLocale()
12/02/24 18:29:43 INFO HTTPThreadGroup-26 ENTERING_METHOD : LNIdentityPluginManager setLocale()
12/02/24 18:29:43 INFO HTTPThreadGroup-26 EXITING_METHOD : LNIdentityPluginManager setLocale()
12/02/24 18:29:43 INFO HTTPThreadGroup-26 ENTERING_METHOD : LNIdentityPluginManager getPluginDescription()
12/02/24 18:29:43 INFO HTTPThreadGroup-26 EXITING_METHOD : LNIdentityPluginManager getPluginDescription()
12/02/24 18:29:43 INFO HTTPThreadGroup-26 ENTERING_METHOD : LNIdentityPluginManager getPluginVersion()
12/02/24 18:29:43 INFO HTTPThreadGroup-26 EXITING_METHOD : LNIdentityPluginManager getPluginVersion()
12/02/24 18:30:07 INFO HTTPThreadGroup-27 StellentIdentityPlugin.autheticate: username=weblogic
12/02/24 18:34:21 INFO HTTPThreadGroup-26 StellentIdentityPlugin.autheticate: username=weblogic
12/02/24 18:39:28 INFO HTTPThreadGroup-28 StellentIdentityPlugin.autheticate: username=weblogic
12/02/25 16:15:08 INFO HTTPThreadGroup-36 getQueryFilterPlugin:username=tempxxx
12/02/25 16:15:08 INFO HTTPThreadGroup-35 getQueryFilterPlugin:username=tempxxx
12/02/25 16:15:08 INFO FlexSecThread-4 StellentQueryFilter.getSecurityValues: secAttributeName=ACCOUNT
12/02/25 16:15:08 INFO FlexSecThread-2 StellentQueryFilter.getSecurityValues: secAttributeName=ACCOUNT
12/02/25 16:15:19 WARN HTTPThreadGroup-36 A security filter authorization timeout for dsid = 22 occurred after 10000 milliseconds. Start time: 16:15:08 743ms End time: 16:15:18 677ms
12/02/25 16:15:19 WARN HTTPThreadGroup-35 A security filter authorization timeout for dsid = 22 occurred after 10000 milliseconds. Start time: 16:15:08 758ms End time: 16:15:18 677ms
12/02/25 16:15:37 INFO HTTPThreadGroup-37 ENTERING_METHOD : LNIdentityPluginManager setLocale()
12/02/25 16:15:37 INFO HTTPThreadGroup-37 EXITING_METHOD : LNIdentityPluginManager setLocale()
12/02/25 16:15:37 INFO HTTPThreadGroup-37 ENTERING_METHOD : LNIdentityPluginManager setLocale()
12/02/25 16:15:37 INFO HTTPThreadGroup-37 EXITING_METHOD : LNIdentityPluginManager setLocale()
12/02/25 16:15:37 INFO HTTPThreadGroup-37 ENTERING_METHOD : LNIdentityPluginManager getPluginDescription()
12/02/25 16:15:37 INFO HTTPThreadGroup-37 EXITING_METHOD : LNIdentityPluginManager getPluginDescription()
12/02/25 16:15:37 INFO HTTPThreadGroup-37 ENTERING_METHOD : LNIdentityPluginManager getPluginVersion()
12/02/25 16:15:37 INFO HTTPThreadGroup-37 EXITING_METHOD : LNIdentityPluginManager getPluginVersion()
12/02/25 16:16:36 INFO HTTPThreadGroup-37 StellentIdentityPlugin.autheticate: username=weblogic
12/02/25 17:18:56 INFO HTTPThreadGroup-47 ENTERING_METHOD : LNIdentityPluginManager setLocale()
12/02/25 17:18:56 INFO HTTPThreadGroup-47 EXITING_METHOD : LNIdentityPluginManager setLocale()
12/02/25 17:18:56 INFO HTTPThreadGroup-47 ENTERING_METHOD : LNIdentityPluginManager setLocale()
12/02/25 17:18:56 INFO HTTPThreadGroup-47 EXITING_METHOD : LNIdentityPluginManager setLocale()
12/02/25 17:18:56 INFO HTTPThreadGroup-47 ENTERING_METHOD : LNIdentityPluginManager getPluginDescription()
12/02/25 17:18:56 INFO HTTPThreadGroup-47 EXITING_METHOD : LNIdentityPluginManager getPluginDescription()
12/02/25 17:18:56 INFO HTTPThreadGroup-47 ENTERING_METHOD : LNIdentityPluginManager getPluginVersion()
12/02/25 17:18:56 INFO HTTPThreadGroup-47 EXITING_METHOD : LNIdentityPluginManager getPluginVersion()
12/02/25 17:19:34 INFO HTTPThreadGroup-46 StellentIdentityPlugin.autheticate: username=weblogic
ORACLE SES Version :10.1.8.2 windows
UCM 11gR1-11.1.14.0
Both server are running same machine .without identiy pluging i m able to crawl the source with option"ACLs Controlled by the Source".but for "No Access Control List" i am facing error
EQG-31202: Security attribute not allowed in identity-based access control crawl
12:59:31:730 ERROR crawler_2 EQP-60307: Error when processing item idcplg?IdcService=GET_FILE&dDocName=UTILITYFOLIO1&allowInterrupt=1&Rendition=web&RevisionSelectionMethod=latestReleased: EQG-31202: Security attribute not allowed in identity-based access control crawl. Verify that the details of the item such as URL, ACL, etc. are correct.
12:59:31:730 ERROR crawler_2 EQG-31202: Security attribute not allowed in identity-based access control crawl oracle.search.sdk.crawler.ProcessingException oracle.search.crawler.AclHelper:addSecurityAttribute:454 oracle.search.plugin.rss.ItemUtil:convertItem:129 oracle.search.plugin.rss.RSSCrawler:crawl:200 oracle.search.crawler.CrawlingThread:run:1490
12:59:31:730 INFO crawler_2 Releasing lock on idcplg?IdcService=GET_FILE&dDocName=UTILITYFOLIO1&allowInterrupt=1&Rendition=web&RevisionSelectionMethod=latestReleased
12:59:31:730 ERROR crawler_2 EQP-60307: Error when processing item idcplg?IdcService=GET_FILE&dDocName=UTILITYFOLIO1&allowInterrupt=1&Rendition=web&RevisionSelectionMethod=latestReleased: EQP-60307: Error when processing item idcplg?IdcService=GET_FILE&dDocName=UTILITYFOLIO1&allowInterrupt=1&Rendition=web&RevisionSelectionMethod=latestReleased: EQG-31202: Security attribute not allowed in identity-based access control crawl. Verify that the details of the item such as URL, ACL, etc. are correct.
Error Stack:
java.lang.Exception: EQP-60307: Error when processing item idcplg?IdcService=GET_FILE&dDocName=UTILITYFOLIO1&allowInterrupt=1&Rendition=web&RevisionSelectionMethod=latestReleased: EQG-31202: Security attribute not allowed in identity-based access control crawl. Verify that the details of the item such as URL, ACL, etc. are correct.
at oracle.search.plugin.rss.RSSCrawler.crawl(RSSCrawler.java:253)
at oracle.search.crawler.CrawlingThread.run(CrawlingThread.java:1490)
Caused by: oracle.search.sdk.crawler.ProcessingException: EQG-31202: Security attribute not allowed in identity-based access control crawl
at oracle.search.crawler.AclHelper.addSecurityAttribute(AclHelper.java:454)
at oracle.search.plugin.rss.ItemUtil.convertItem(ItemUtil.java:129)
at oracle.search.plugin.rss.RSSCrawler.crawl(RSSCrawler.java:200)
... 1 more
. Verify that the details of the item such as URL, ACL, etc. are correct.
Please give me your inputs to resolve this issue.
Thanks
AjayHi ,
Its a bit urgent can someone give inputs on this.
Thanks
-Ajay -
Hi all
I'm completely new to this technology.
Could anyone please help me with the installation procedure of oracle UCM.
I have to integrate oracle UCM with OAM 10.1.4.0.1.
Thanks & Regards,
Swathi.Hi Ajay,
Thanks a lot for your reply.
It was very helpful.
Started the installation of oracle ucm but couldnt complete that.
When i looked in to the log files got the error message which says
NOTICE: Unable to connect to database. Installation will fail.
ERROR: Unable to create database connection for the database 'InstallerDatabase' with connection string 'jdbc:oracle:thin:@192.168.226.130:1521:ORACLE'. Please make sure that the connection string, user and password are correct. Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
192.168.226.130:1521:ORACLE
WARNING: Unexpected exception: Unable to initialize the system provider 'SystemDatabase'. Unable to create database connection for the database 'SystemDatabase' with connection string 'jdbc:oracle:thin:@192.168.226.130:1521:ORACLE'. Please make sure that the connection string, user and password are correct. Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
192.168.226.130:1521:ORACLE
WARNING: Unable to publish user database.
WARNING: Unable to register with Administration Server.
WARNING: Unable to start server at c:/oracle/ucm/server/.
WARNING: c:/oracle/ucm/server/shared/os/win32/bin/NtProcCtrl.exe start IdcContentService idc
WARNING: Unable to open the service handle.
WARNING: The service does not exist on the specified computer.
WARNING: Unable to start server at c:/oracle/ucm/server/.
WARNING: c:/oracle/ucm/server/admin/bin/NtProcCtrl start IdcAdminService idc_admin
WARNING: Unable to open the service handle.
WARNING: The service does not exist on the specified computer.
NOTICE: Finished install type Install with warnings at 3/26/10 10:10 AM.
can you please suggest a way to fix this issue.
Thanks & Regards,
Swathi.
Edited by: user9116523 on Mar 26, 2010 2:04 AM -
How to download a file from Oracle UCM using OSB
Hi,
How can I download a file from Oracle UCM and save it on a filesystem using OSB 11.1.1.5.
ThanksUCM supplies webservice interfaces which let you retrieve the filecontent by soap calls from UCM (http://ucmhost/_dav/cs/idcplg for example). (maybe you should enable some settings on ucm to have this webservice interface getting published).
This services for example has 2 operations getFileByID and getFileByName.
So you can just call these services from within OSB.
After that you need to do some tests if you eitherway need to create a file-transport business-service and call this one from your proxy service or create a messageType proxyservice (binary) which calls this file-transport business service to be able to write fo filesystem.
I think for the OSB book i used a jca file adapter generated in Jdeveloper and used that one to write to filesystem. -
ERROR: ORACLE prepare error: ORA-00936: missing expression
Hello,
I am required to run "pass-through" Oracle SQL, to extract data from tables into SAS for processing and manipulation. My code (attached) reads and writes (executes) but with zero records to test first. I cannot get past the Prepare Error.
The query is very much like other queries that seem to work, but I cannot get past this prepare error. I have no other access to individauls with adequate knowledge of PL SQL, and as a last stop hoped others in the forum could quickly spot the source of errror.
Thanks very much in advance for any assistance.
Jeff
1 ;*';*";*/;quit;run;
2 OPTIONS PAGENO=MIN;
3 %LET _CLIENTTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
4 %LET _EGTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
5 %LET _CLIENTPROJECTNAME=%NRBQUOTE();
6 %LET _SASPROGRAMFILE=;
7
8 ODS _ALL_ CLOSE;
NOTE: Some of your options or statements may not be supported with the Activex or Java series of devices. Graph defaults for these
drivers may be different from other SAS/GRAPH device drivers. For further information, please contact Technical Support.
9 OPTIONS DEV=ACTIVEX;
10 FILENAME EGHTML TEMP;
NOTE: Writing HTML(EGHTML) Body file: EGHTML
11 ODS HTML(ID=EGHTML) FILE=EGHTML ENCODING='utf-8' STYLE=EGDefault
11 ! STYLESHEET=(URL="file:///C:/Program%20Files/SAS/Shared%20Files/BIClientStyles/EGDefault.css")
11 ! ATTRIBUTES=("CODEBASE"="http://www2.sas.com/codebase/graph/v91/sasgraph.exe") NOGTITLE NOGFOOTNOTE GPATH=&sasworklocation
11 ! ;
12
13 %gaccessible;
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date Programmer Reviewed By WHAT WAS DONE;
24 *----- -------------- ------------ -----------------------------------------;
25 *2005 David Boyd Program creation for test population;
26 *;
27 *02/06/2006 Ivon Jones Modified to include total population;
28 *;
29 *07/20/2006 Ivon Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 Ivon Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data _null_ ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
2 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.01 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data _null_ step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data _null_ ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.01 seconds
3 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.00 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.03 seconds
cpu time 0.03 seconds
83
84 proc datasets
85 library = rosdwp nolist;
86 delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 3.74 seconds
cpu time 0.03 seconds
88
89 proc datasets
90 library=work nolist;
91 copy out = rosdwp move;
92 select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.32 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105 execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 pcp_spc,
110 rx_date,
4 The SAS System 11:44 Friday, October 30, 2009
111 brand,
112 generic,
113 ahfs_cd,
114 ahfs_dsc,
115 lbl,
116 strngth,
117 unt,
118 spc_tx_cls_cd,
119 spc_tx_cls_dsc,
120 gcn,
121 rx_num,
122 rx_ingrd,
123 rx_paid,
124 rx_cnt,
125 rx_qty,
126 rx_day
127 FROM connection to rosdwp
128 (SELECT
129 mid.UNIQ_MBR_ID as mrb_id,
130 pd.PRVDR_SPCLTY_DESC as pcp_spc,
131 pcf.LAST_SRVC_DT as rx_date,
132 dd.BRAND_NAME as brand,
133 dd.GNRC_NAME as generic,
134 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
135 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
136 dd.LABEL_NAME as lbl,
137 dd.STRNGTH_NUM as strngth,
138 dd.STRNGTH_UNIT_DESC as unt,
139 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
140 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
141 dd.GCN_NUM as gcn,
142 pcf.PRSCRPTN_NUM as rx_num,
143 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
144 SUM(pcf.PD_AMT) as rx_paid,
145 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
146 SUM(pcf.DSPNSD_QTY) as rx_qty,
147 SUM(pcf.DAY_SUPLY_CNT) as rx_day
148 FROM
149 PHRMCY_CLM_FACT pcf,
150 MBR_ID_DMNSN mid,
151 DRUG_DMNSN dd,
152 PRVDR_DMNSN pd,
153 biplr_up_v1
154 WHERE
155 (
156 (biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
157 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
158 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
159 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
160 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
161 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
162 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between &q.&fdos.&q and &q.&ldos.&q)
163 )
164 Group By
165 mid.UNIQ_MBR_ID ,
166 pd.PRVDR_SPCLTY_DESC ,
167 pcf.LAST_SRVC_DT ,
168 dd.BRAND_NAME ,
5 The SAS System 11:44 Friday, October 30, 2009
169 dd.GNRC_NAME ,
170 dd.AHFS_THRPTC_CLS_CD ,
171 dd.AHFS_THRPTC_CLS_DESC ,
172 dd.LABEL_NAME ,
173 dd.STRNGTH_NUM ,
174 dd.STRNGTH_UNIT_DESC ,
175 dd.SPECF_THRPTC_CLS_CD ,
176 dd.SPECF_THRPTC_CLS_DESC ,
177 dd.GCN_NUM ,
178 pcf.PRSCRPTN_NUM
179 );
ERROR: ORACLE prepare error: ORA-00936: missing expression. SQL statement: SELECT mid.UNIQ_MBR_ID as mrb_id,
pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic,
dd.AHFS_THRPTC_CLS_CD as ahfs_cd, dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as
strngth, dd.STRNGTH_UNIT_DESC as unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as
spc_tx_cls_dsc, dd.GCN_NUM as gcn, pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT)
as rx_paid, SUM(pcf.UNIT_SRVC_CNT) as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day
FROM PHRMCY_CLM_FACT pcf, MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, biplr_up_v1 WHERE (
(biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY =
PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
(PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
(PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between '01JUN2007'
and '30SEP2009') ) Group By mid.UNIQ_MBR_ID , pd.PRVDR_SPCLTY_DESC , pcf.LAST_SRVC_DT , dd.BRAND_NAME ,
dd.GNRC_NAME , dd.AHFS_THRPTC_CLS_CD , dd.AHFS_THRPTC_CLS_DESC , dd.LABEL_NAME , dd.STRNGTH_NUM ,
dd.STRNGTH_UNIT_DESC , dd.SPECF_THRPTC_CLS_CD , dd.SPECF_THRPTC_CLS_DESC , dd.GCN_NUM , pcf.PRSCRPTN_NUM.
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
180 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
181 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
182 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.14 seconds
cpu time 0.03 seconds
183
184Hello Again ,
Wish Oracle was a bit more informative. Am using a SAS Institute Product called Enterprise Guide. A "hot fix" was installed to address an issue that the product appears unable to save the latest version of edited code changes (hence " BETWEEN between" remaining even after a prior edit). In any case, with the change, am now receiving this error:
" ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier". (Log file appears below)
-The error remains, regardless of whether one uses "pass through" code to pass the date range to Oracle (which looks ok from the log output below I believe), or if I hard code the date range into the PL SQL query itself.
-The Prepare error always appears at end of the inner SELECT.
-The Prepare error remains, with or without the GROUP BY clause.
Is there anything else here I am missing? Someone suggested a reserve word - but from other ANSI SQL versions, I do not see that is the case. I have consulted SAS Tech Support and SAS List Serve at University of GA. but nothing definitive from these sources. Have requested facility to be able to run Oracle directly, outside this SAS Institute product - in process.
Any suggestions are greatly appreciated. Thanks to everyone very much.
Jeff
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date Programmer Reviewed By WHAT WAS DONE;
24 *----- -------------- ------------ -----------------------------------------;
25 *2005 D. Boyd Program creation for test population;
26 *;
27 *02/06/2006 I. Jones Modified to include total population;
28 *;
29 *07/20/2006 I. Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 I Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data null ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
2 The SAS System 12:46 Monday, November 2, 2009
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data null step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data null ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.02 seconds
cpu time 0.02 seconds
83
84 proc datasets
85 library = rosdwp nolist;
86 delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.61 seconds
cpu time 0.01 seconds
88
89 proc datasets
90 library=work nolist;
91 copy out = rosdwp move;
92 select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.15 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105 execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 uniq_mbr_id,
110 pcp_spc,
111 rx_date,
112 brand,
113 generic,
114 ahfs_cd,
115 ahfs_dsc,
116 lbl,
117 strngth,
118 unt,
119 spc_tx_cls_cd,
120 spc_tx_cls_dsc,
121 gcn,
122 rx_num,
123 rx_ingrd,
124 rx_paid,
125 rx_cnt,
126 rx_qty,
127 rx_day
128 FROM connection to rosdwp
129 (SELECT
130 mid.UNIQ_MBR_ID as uniq_mrb_id,
131 blpr.mrb_id.mbr_id,
132 pd.PRVDR_SPCLTY_DESC as pcp_spc,
133 pcf.LAST_SRVC_DT as rx_date,
134 dd.BRAND_NAME as brand,
135 dd.GNRC_NAME as generic,
136 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
137 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
138 dd.LABEL_NAME as lbl,
139 dd.STRNGTH_NUM as strngth,
140 dd.STRNGTH_UNIT_DESC as unt,
141 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
142 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
143 dd.GCN_NUM as gcn,
144 pcf.PRSCRPTN_NUM as rx_num,
145 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
146 SUM(pcf.PD_AMT) as rx_paid,
147 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
148 SUM(pcf.DSPNSD_QTY) as rx_qty,
149 SUM(pcf.DAY_SUPLY_CNT) as rx_day
150 FROM
151 PHRMCY_CLM_FACT pcf,
152 MBR_ID_DMNSN mid,
153 DRUG_DMNSN dd,
154 PRVDR_DMNSN pd,
155 BIPLR_UP_V1 blpr
156 WHERE
157 (BIPLR_UP_V1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
158 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
159 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
160 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
161 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
162 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
163 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN &q.&fdos.&q and &q.&ldos.&q)
164 );
ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier. SQL statement: SELECT
mid.UNIQ_MBR_ID as uniq_mrb_id, blpr.mrb_id.mbr_id, pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as
rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic, dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as strngth, dd.STRNGTH_UNIT_DESC as
unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc, dd.GCN_NUM as gcn,
pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT) as rx_paid, SUM(pcf.UNIT_SRVC_CNT)
as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day FROM PHRMCY_CLM_FACT pcf,
MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, BIPLR_UP_V1 blpr WHERE (BIPLR_UP_V1.mbr_id =
MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
(PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
(PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
(PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN '01JUN2007' and '30SEP2009').
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
165 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
166 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
167 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.24 seconds
cpu time 0.02 seconds
168
Edited by: user12142482 on Nov 2, 2009 4:02 PM -
Oracle bi error codes u9kp7q94 OBIEE 10g
Hi All,
I have created new user in RPD(Online Mode).
Then i have loged into Answer.It throws error
"oracle bi error codes u9kp7q94 OBIEE 10g"
How to fix.
Thanks
GramRaj wrote:
Hi All,
I have created new user in RPD(Online Mode).
Then i have loged into Answer.It throws error
"oracle bi error codes u9kp7q94 OBIEE 10g"
How to fix.
Thanks
GramAre you getting this error on the login screen? or when you are opening a report? -
Obiee oracle gateway error while updating row count
Hi ,
OBIEE server 11.1.1.5 ,oracle server11g installed in linux 64bit,
while updating row count in Admin tool i am getting the following error
[NQODBC][SQL_STATE:HY000][nQSError:10058] A general error has occured.
[nQSError: 43113]Message returned from OBIS.
[nQSError:43093]An error occured while processing the EXECUTE PHYSICAL statement.
[nQSError:17003]Oracle gateway error: OCIEnvNIsCreate or OCIEnvInit failed to initialize environment.Please check your Oracle Client installation and make sure the correct version of OCI libraries are in the library path.
i am able to check the database from sqlplus it is working fine.
Any suggestion highly appreciated plzzzMake sure your connection pool is valid and able to import or execute reports.
If everything good as above said, in Physical layer database properties-> general tab choose the database version and try it once.
If not
Check the doc id 1271486.1
Or
To resolve the issue create a softlink (ln -s) in the <OracleBI>/server/Bin folder to link to the 32-bit Oracle Client Driver file.
The example below shows how to perform a softlink from the 64 bit directory:
cd /u10/app/orcladmin/oracle/OracleBI/server/Bin
ln -s $ORACLE_HOME/lib32/libclntsh.so.10.1 libclntsh.so.10.1
If helps mark -
Oracle SSO error while trying to access a report
Hi All,
I am using Oracle 11g reports and forms.My adf application(using JDeveloper 11.1.1.4) will use oracle reports through url.
From adf application we form a url for the reports like https://<server>:<port>/reports/rwservlet?server=devstage11g&destype=cache&desformat=pdf&report=spore001…
we send the userid parameter as a hidden parameter in the request as we do not want the userid information to be visible in the URL. It works fine in one environment. But in another environment when we hit the url it always give a page with a single line saying "Oracle SSO". When we hit the same url with userid parameter appended to it directly, it works fine.
Checked the configuration difference, but not able to find any difference in the configuration. Please help me to find why it always gives "Oracle SSO" error.
Thanks,
Priya.Hi ;
pelase check below which could be similar error like yours
Troubleshooting of Runtime Errors of Customer Intelligence Reports [ID 284829.1]
Regard
Helios -
Oracle Internal error while executing sys objects
Hi,
I recently restored an oracle 9i database from datafiles I received from client.
I am consistently getting the following error whenever I try to open a new sqlplus session.
bash-2.03$ sqlplus $IQ_DBLOGON
SQL*Plus: Release 9.2.0.6.0 - Production on Thu Mar 27 20:30:09 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-06553: PLS-801: internal error [56319]
ERROR:
ORA-06553: PLS-801: internal error [56319]
Error accessing package DBMS_APPLICATION_INFO
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
SQL>
After search I found some references to recreate the sys objects by running standard sqls like CATALOG.SQL, CATPPROC.SQL etc. While running these SQLs as well I am getting oracle "Internal Errors".
I tries re-creating many sys packages and am consistently getting these errors. It looks to me I have problem while accessing procedures in all sys packages. I checked, all the packages are valid and have EXECUTE priviledge to PUBLIC.
See an example of the error below.
bash-2.03$ sqlplus /nolog
SQL*Plus: Release 9.2.0.6.0 - Production on Thu Mar 27 20:37:13 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> connect /as sysdba
Connected.
SQL>
SQL>
SQL> execute dbms_stats.delete_database_stats;
BEGIN dbms_stats.delete_database_stats; END;
ERROR at line 1:
ORA-06553: PLS-801: internal error [56319]
SQL>
Kindly let me know the solution for the problem. Please let me know in case you need any more details.
Regards,
UllhasORA-06553: PLS-801: internal error [56319] usually occurs,when there was a switch between bit sizes (source is 32 bit,target 64 bit and vice versa) . In such a case script utlirp.sql has to be run ($ORACLE_HOME/rdbms/admin).
Werner -
5213: Bad Oracle login error in OCISessionBegin() while running ttcacheuidp
Hi,
I am working on Oracle TimesTen Client: Oracle TimesTen 11.2.1.8.0
I am following this step: http://download.oracle.com/otn_hosted_doc/timesten/1121/quickstart/html/admin/cache_grid_create.html
I am in the step 4: 4. Associate the Oracle Cache Administration user with the Cache Database
And I got this error:
Command> connect "dsn=cachedsh_schema;uid=cacheadm;pwd=cacheadm;oraclepwd=oracle";
Connection successful: DSN=cachedsh_schema;UID=cacheadm;DataStore=/u03/TimesTenCache/datastore/cachedsh_schema;DatabaseCharacterSet=AL32UTF8;ConnectionCharacterSet=US7ASCII;DRIVER=/u01/app/oracle/product/TimesTen/ttscofield/TimesTen/ttscofield/lib/libtten.so;PermSize=768;TempSize=256;TypeMode=0;OracleNetServiceName=SCOFIELD;
(Default setting AutoCommit=1)
Command> call ttcacheuidpwdset ('cacheadm','cacheadm');
5213: Bad Oracle login error in OCISessionBegin(): ORA-01017: invalid username/password; logon denied rc = -1
5935: Could not validate Oracle login: uid = CACHEADM, pwd = HIDDEN, OracleNetServiceName = SCOFIELD, TNS_ADMIN = "", ORACLE_HOME= "/u01/app/oracle/product/11.2/db_1"
The command failed.
What seems to be the issue?
I referenced this link: http://download.oracle.com/otn_hosted_doc/timesten/1121/doc/timesten.1121/e13069/proced.htm#TTREF237
And on the notes it says:
Notes
This procedure cannot be called from a Client/Server connection.
This procedure is available only for IMDB Cache.
The cache administration user ID and password cannot be set while either the cache agent or the replication agent are running.
The cache administration user ID cannot be reset while there are ASYNCHRONOUS WRITETHROUGH cache groups or AUTOREFRESH cache groups (with a state that is not equal to OFF) on the database.
What does: This procedure cannot be called from a Client/Server connection mean?
Is this the root cause of the problem or I am missing a step?
Thanks!I still get the same error. But I have figured out what is wrong. Just in case other users encounter the same errors, here's what I did:
I created a tnsnames.ora file in my TIMESTEN_HOME/network/admin that has the connection info to testenv Oracle instance. +(i dont know if this is necessary)+. Then:
[oracle@testenv ~]$ ttmodinstall -tns_admin option
TNS_ADMIN for the instance 'testenv' is currently not set.
Would you like to change TNS_ADMIN for this instance? [ yes ]
Please enter a value for TNS_ADMIN (q=quit)? [ option ] /u01/app/oracle/product/TimesTen/testenv/TimesTen/testenv/network/admin
Do you want to restart the daemon using the new configuration? [ yes ]
Restarting the daemon ...
TimesTen Daemon stopped.
TimesTen Daemon startup OK.
Instance testenv is now configured with TNS_ADMIN=/u01/app/oracle/product/TimesTen/testenv/TimesTen/testenv/network/admin
[oracle@testenv ~]$ ttversion
TimesTen Release 11.2.1.8.0 (64 bit Linux/x86_64) (testenv:53388) 2011-02-02T02:20:46Z
Instance admin: oracle
Instance home directory: /u01/app/oracle/product/TimesTen/testenv/TimesTen/testenv
Group owner: oinstall
Daemon home directory: /u01/app/oracle/product/TimesTen/testenv/TimesTen/testenv/info
PL/SQL enabled.
[oracle@testenv ~]$ ttisql "dsn=cachedsh_schema;uid=cacheadm;pwd=cacheadm;oraclepwd=cacheadm"
Copyright (c) 1996-2011, Oracle. All rights reserved.
Type ? or "help" for help, type "exit" to quit ttIsql.
connect "dsn=cachedsh_schema;uid=cacheadm;pwd=cacheadm;oraclepwd=cacheadm";
Connection successful: DSN=cachedsh_schema;UID=cacheadm;DataStore=/u03/TimesTenCache/datastore/cachedsh_schema;DatabaseCharacterSet=AL32UTF8;ConnectionCharacterSet=US7ASCII;DRIVER=/u01/app/oracle/product/TimesTen/testenv/TimesTen/testenv/lib/libtten.so;PermSize=768;TempSize=256;TypeMode=0;OracleNetServiceName=SCOFIELD;
(Default setting AutoCommit=1)
Command> call ttgridcreate ('cachedshgrid');
Command> call ttgridinfo;
< CACHEDSHGRID, CACHEADM, Linux x86-64, 64-bit, 11, 2, 1 >
1 row found.
Command> call ttgridnameset ('cachedshgrid');
Command>
Thanks!
Maybe you are looking for
-
Pass value from report on skillbuilder modal page
I am using the skillbuilder modal dialog. I have a report that displays in the modal. I want to pass a value from the report back to the page that called the modal and then close the modal. I have tried several different things, but I have not been s
-
2.08.0002 Beta Drivers will not install on Audigy 2 Platinum
I am attempting to install the new beta drivers (SBA2_PCDrvBeta_LB_2_08_0002.exe) to gain OpenAL support and better Battlefield 2 performance but I have not been able to. Upon installing the drivers, the system will freeze. I have left it for over an
-
"folder on server" space???
when i want to upload to ftp host , what do i need to write in "folder on server" space???
-
Message error in Nokia 5800 XM
Hi, I'm using Nokia 5800 XM. In my phone, I am facing one issue with call summary. Even I set this option Settings->Calling->Call->Summary after Call -OFF It will display Balance and expiry date. (as I am using Pre-paid connection). I called Airtel,
-
Data flow error in workflow runtime
I have many workflow's (standard or not) that present error in runtime. The data flow between container task and container workflow doesn't work if one element is empty, but this element not is mandatory. List of errors: - ParForEach 000000 - Object