Socket A Heatsink Cleaning Help!!!

whats the best way to clean a heatsink without removing it....eg can i use a spray gun or something simple?

yah every site says take it but with these amd sockets its a day a heck trying to put it back on and no break the chip....i just used a brush worked great my cpu is about 4*c cooler now.....thanks for the help people....one more question though...about how long do thermal pads last?

Similar Messages

I touched with my fingers my macbook's power socket, should I cleaned to remove the fingers oil on it? or it s safe?

I touched with my fingers my macbook's power socket, should I cleaned to remove the fingers oil on it? or it s safe?

It is safe. Do not have to worry about it.
Best.

Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box but no joy, i have tried resetting the iPad but still no joy, have tried different plug sockets, different plugs/cables, help

Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box that came with it but no joy, i have tried resetting the iPad but still no joy, have tried different mains plug sockets around the house with no joy, I have tried different USB mains plugs but again no joy, I tried using my new iPad cable into the USB port of my MacBook Pro laptop but still no joy, then, I tried using my old iPod classic cable into my MacBook Pro and that worked, so I have a way of charging my new iPad3 but its not practical as i have to take my MacBook Pro everywhere if I want to charge it which kind of defeats the object of having an iPad, has anybody experienced anything similar and how was it fixed? can anybody help me please...

Grumpy Gator,
Please note it did say at the store's discretion, but people have actually been able to return it to the on-line store. (I only saw a couple who tried.)
And given the outcry, I would think Apple might have other Apple stores join in. Just in case, though, if you can, you might bring it in today.
If it's an ARS, my guess is they can stick to their 14 day return. Apple cannot force them to do it. SO if it's not bought directly from Apple, and it's past the 14 day deal, I'd bring it in to the store today if you have one. When I gave people the cnet.com site, I gave it so people could read it and know only Apple had made the decision for Apple. And I suggested to some that an Apple reseller would probably stick with their own return policy.
Because Arnie had just bought his, he should be able to return it to Apple or an ARS because an ARS has to have some kind of full refund or at least return for credit within 7 or 14 days of purchase.
Hope this helps.

Tv aerial socket in another room - help!

I have set up my BT broadband Hub OK and have broadband........but now struggling with the TV vision box. I've realised it may be because my tv aerial socket is in another room!!! and my tv donated by a friend has no aeriel cable with it.
I assume i have to connect the vision box to this aerial socket, so i need to buy an aerial. Will i have to buy a really really long one and trail it through the house or is there a way to overcome this.
Any advice gratefully accepted - i am not technical and have no idea what to do or where to go
Thanks
Solved!
Go to Solution.

If you want to be able to watch and record Freeview TV channels then you are going to need a good external aerial to get a reliable signal. This will have to be connected to the aerial input of the BT Vision box.
If you just want to watch "on demand" content from BT Vision, then an aerial is not really needed.
Your TV will need to be connected to the BT Vision box via a SCART or HDMI connection.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Socket Connection - Character Set - Help

Hello:
I am creating a socket using UTL_TCP package. After making a successful connection, I have to send data in ISO-8859 format. The message should look something like this.
STX followed by data in ascii followed by ETX.
STX and ETX are ascii for 2 and 3.
I have the data in STRING. example 'DOWNLAOD ME TO THE SERVER'. This string is currently in VARCHAR2 variable.
I would like to know how can I convert the above data to ASCII string and then prefix it with STX and suffix with ETX before I send it down the socket. I think I have to use utl_encode package but am not sure where to start.
Please help.
Thanks.

Do not understand your problem. It seems to me that you simply need to create a varchar2 string that contains the ASCII text you want to transmit via TCP using the socket connection you have creared, using the API call UTL_TCP.WRITE_LINE (write string without a TCP linefeed char) or UTL_TCP.WRITE_LINE (with linefeed).

Memory cleaning help

hi i just whant to ask should i use memory cleaning and how many time a week and is clearing your event log good because it helps to make my blackberry faster

memory cleaning does not do what most think it does it acts only on empty memory areas wiping them over and over again to get them totally clean it does not function like a PC hard drive defrag for most people memory cleaning slows their system down rather than provide any benifit clearing event logs can be good but how often cannot be stated as "normal" since "normal" depends on the unique circumstances of the individual you must experiement with how frequent works best for you good luck
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

About the socket security problem,Plese help.

I use the port 843 server to send xml to swf.But not work. Please help. My Code is:
Server:
//HelloTest.java
import java.io.IOException;
import java.net.ServerSocket;
import java.net.Socket;
//让其继承线程类是为了更好控制其余的线程
public class HelloTest extends Thread {
* @param args
public static void main(String[] args) {
// TODO Auto-generated method stub
//发送策略的服务器
new HelloTest().start();
//这个是用的fuq
new Thread(new QtServer()).start();
@Override
public void run()
System.out.println("策略服务器启动");
boolean lising=true;
ServerSocket ss;
try {
ss = new ServerSocket(843);
while(lising)
try {
//得到socket服务器
Socket sc=ss.accept();
SendPolicyFile sp=new SendPolicyFile(sc);
System.out.println("为什么呢");
new Thread(sp).start();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
try {
Thread.sleep(1000);
} catch (InterruptedException e) {
// TODO Auto-generated catch block
e.printStackTrace();
ss.close();
} catch (IOException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.io.PrintWriter;
import java.net.Socket;
//SendPolicyFile.java
public class SendPolicyFile implements Runnable {
private Socket soc;
private OutputStream _socketOut;
private InputStream _socketIn;
public SendPolicyFile(Socket s) throws IOException
this.soc=s;
_socketOut=s.getOutputStream();
_socketIn=s.getInputStream();
//设置超时的限制
//soc.setSoTimeout(1000);
public void run() {
// TODO Auto-generated method stub
    try {
readRandSp();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
@SuppressWarnings("unused")
private void readRandSp() throws IOException
if(read().equals("<policy-file-request/>"))
System.out.println("write Policy to flash");
writePolicy();
        //close stream and socket
close();
//写策略文件的方法
private void writePolicy() throws IOException
   String string1="<?xml version=\"utf-8\" ?><cross-domain-policy><site-control permitted-cross-domain-policies=\"master-only\"/><allow-access-from domain=\"*\" to-ports=\"8001\"/></cross-domain-policy>"+"\u0000";
PrintWriter pw=new PrintWriter(_socketOut);
pw.println(string1+"\u0000");
pw.flush();
pw.close();
System.out.println(string1+"\u0000");
//关闭流
//关闭socket
public void close()
if(_socketOut!=null)
try {
_socketOut.close();
if(_socketIn!=null)
_socketIn.close();
if(soc!=null)
soc.close();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
_socketIn=null;
_socketOut=null;
soc=null;
//发送两个Socket
private String read() throws IOException
System.out.println("这里也执行吗");
StringBuffer buffer=new StringBuffer();
int codePoint;
boolean zeroByteRead=false;
do{
//这个地方阻塞了
codePoint=this._socketIn.read();
//如果接受到的codePoint为null那证明客户端与我们失去连接了
if(codePoint==0)
zeroByteRead=true;
else
buffer.appendCodePoint(codePoint);
while(!zeroByteRead && buffer.length()<30);
return buffer.toString();

I use the port 843 server to send xml to swf.But not work. Please help. My Code is:
Server:
//HelloTest.java
import java.io.IOException;
import java.net.ServerSocket;
import java.net.Socket;
//让其继承线程类是为了更好控制其余的线程
public class HelloTest extends Thread {
* @param args
public static void main(String[] args) {
// TODO Auto-generated method stub
//发送策略的服务器
new HelloTest().start();
//这个是用的fuq
new Thread(new QtServer()).start();
@Override
public void run()
System.out.println("策略服务器启动");
boolean lising=true;
ServerSocket ss;
try {
ss = new ServerSocket(843);
while(lising)
try {
//得到socket服务器
Socket sc=ss.accept();
SendPolicyFile sp=new SendPolicyFile(sc);
System.out.println("为什么呢");
new Thread(sp).start();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
try {
Thread.sleep(1000);
} catch (InterruptedException e) {
// TODO Auto-generated catch block
e.printStackTrace();
ss.close();
} catch (IOException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.io.PrintWriter;
import java.net.Socket;
//SendPolicyFile.java
public class SendPolicyFile implements Runnable {
private Socket soc;
private OutputStream _socketOut;
private InputStream _socketIn;
public SendPolicyFile(Socket s) throws IOException
this.soc=s;
_socketOut=s.getOutputStream();
_socketIn=s.getInputStream();
//设置超时的限制
//soc.setSoTimeout(1000);
public void run() {
// TODO Auto-generated method stub
    try {
readRandSp();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
@SuppressWarnings("unused")
private void readRandSp() throws IOException
if(read().equals("<policy-file-request/>"))
System.out.println("write Policy to flash");
writePolicy();
        //close stream and socket
close();
//写策略文件的方法
private void writePolicy() throws IOException
   String string1="<?xml version=\"utf-8\" ?><cross-domain-policy><site-control permitted-cross-domain-policies=\"master-only\"/><allow-access-from domain=\"*\" to-ports=\"8001\"/></cross-domain-policy>"+"\u0000";
PrintWriter pw=new PrintWriter(_socketOut);
pw.println(string1+"\u0000");
pw.flush();
pw.close();
System.out.println(string1+"\u0000");
//关闭流
//关闭socket
public void close()
if(_socketOut!=null)
try {
_socketOut.close();
if(_socketIn!=null)
_socketIn.close();
if(soc!=null)
soc.close();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
_socketIn=null;
_socketOut=null;
soc=null;
//发送两个Socket
private String read() throws IOException
System.out.println("这里也执行吗");
StringBuffer buffer=new StringBuffer();
int codePoint;
boolean zeroByteRead=false;
do{
//这个地方阻塞了
codePoint=this._socketIn.read();
//如果接受到的codePoint为null那证明客户端与我们失去连接了
if(codePoint==0)
zeroByteRead=true;
else
buffer.appendCodePoint(codePoint);
while(!zeroByteRead && buffer.length()<30);
return buffer.toString();

Socket Closed error please help us finding a fix for the same

Hi everyone,
I have a web application deployed on Weblogic 10.3.4.0. In the application there is hyperlink to download a resouce (say an PDF document). Upon clicking the link, IE shows the Open/Save/Cancel dialog box. If the Open/Save/Cancel dialog box is not acted upon by the user within 1 min after it pops up, Weblogic is closing the socket. This causes IE to only download a part of the file say 784 KB or something. Whereas the entire file maybe 1MB in size. Please help in fixing this issue ASAP.
Thanks in Advance
java.net.SocketException: Socket closed
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:99)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:249)
at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
at weblogic.servlet.internal.CharsetChunkOutput.implWrite(CharsetChunkOutput.java:396)
at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:198)
at weblogic.servlet.internal.ChunkOutputWrapper.write(ChunkOutputWrapper.java:139)
at weblogic.servlet.internal.ServletOutputStreamImpl.write(ServletOutputStreamImpl.java:169)
at com.teja.systemi.util.AroundData.copyStream(AroundData.java:311)
at com.teja.systemi.client.servlet.servant.Newdownloadsingle.producePageData(Newdownloadsingle.java:108)
at com.teja.systemi.client.servlet.servant.BaseViewController.serve(BaseViewController.java:542)
at com.teja.systemi.client.servlet.FrontController.doRequest(FrontController.java:226)
at com.teja.systemi.client.servlet.FrontController.doPost(FrontController.java:128)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Edited by: 910597 on Jan 27, 2012 2:15 AM

What do you mean by "moo" ?
Huh? You don't know about the moo? Are you livin' in a barn or sumthin'
Sorry, corny joke.
Seriously--if you haven't heard about the moo, then check out the MacBook forums. Nearly every third or fourth post is about the mooing problem.
My own MacBook moos, but it's not so bad that it makes me upset. I understand, though, that others have it much worse.
Black Macbook; Mini 1.5GHz (Late 2005); Mini 1.4GHz; PB G4 1GHz; PB Lombard; PB 2400; PMac G3; Blueberry iMac; iPod nano 4GB; and a talking Bill King bobblehead doll--Holy Toledo!

Sockets driving me insane.HELP PLZ stress..stress...stress

The problem I am havin is that the listener class i have to deal with connections will creates a new socket for each connection but it says it is using the same port as the listening ServerSocket is in the case 4444. Here is the code for my Listener. Any help is greatly appreciated.
import java.io.*;
import java.net.*;
import java.util.*;
public class Listener implements Runnable {
public void run () {
try{
listen();
}catch(Exception e){
System.out.println("Error in listener:"+e );
public static void listen() throws IOException{
    int port = 4444;
    ServerSocket server = new ServerSocket (port);
    try{
    System.out.println("Listening...");
         while (true) {
         System.out.println("Listening....");
         Socket client = server.accept ();
         System.out.println ("Accepted from " + client.getInetAddress ());
         System.out.println("Using port:"+ client.getLocalPort());
         System.out.println("server Socket listening on port:"+server.getLocalPort());
         ChatHandler handler = new ChatHandler (client);
         handler.start ();
}catch (IOException ex){
System.out.println("Error in listener"+ex);
}

I am under the impression that this is not true a
port cannot be used by more than one socket as this
woould cause an exception of some kind, No ??
(Although saying that i do not get any exceptions )Sir,
No. And you have the proof. You cannot bind for listening on more than one socket. But once a socket is created it is unique even though the one port on the server side is shared among multiple sockets.
Sincerely,
Slappy

Socket private chat coding help!!!

any one get the private chat coding in TCP/IP(socket connection). I have coding the chat program that can public chat but the private chat get problem.
anyone get the private chat tutorial and comment.....pls help me....
hong

Try searching around with Google. There are millions of chat programs all over the net with source.

MacBook bottom cleaning HELP??

Hi,
I have the new MacBook with the rubber bottom. A few days after buying it, I notice it gets very dirty often. Some of the stains just won't go. I need help on how to clean it properly. Anyone know how?

http://support.apple.com/kb/HT3226
"The bottom case of the MacBook uses a soft nonslip material. Use a 3M Gray Microfiber or soft dye-free, lint-free cloth to clean the bottom case.
It is safe to use isopropyl alcohol 70% or iKlear on the bottom case. Remove any surface dirt gently with your bare hand before proceeding with a cleaner and cloth. After cleaning, dry the bottom case with a soft, lint-free or micro fiber cloth."
Generally, just apply the same rules as to any other electronic item. Avoid water and avoid paper or cotton to clean it (the mini powder they generate can penetrate the case), use mini-cloth like the ones for glasses. For the product itself it depends if your case is alluminium or plastic but in any AppleStore or Eletronic retailer you'll find specific cleaning products.

Socket connection refused - please help!!!!

My socket programs dont work in linux it shows error -
ot@localhost winc]# java parser
Exception in thread "main" java.net.SocketException: Invalid argument or cannot assign requested address
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at java.net.Socket.<init>(Socket.java:309)
at java.net.Socket.<init>(Socket.java:124)
at parser.main(parser.java:10)
Even the basic client server programs show this kind of error in linux. what is the cause for it? And the same programs work perfectly when run in windows. i have removed the firewall settings etc and it still doesnot work in linux
Please help me solve the problem . it is very urgent.

Actually i don't know how the firewall can cause the problem, can u please explain me.
Here is the stack trace.
INFO: Thread-3::Wed Dec 03 11:27:00 EST 2008 : resetConnection-->Connection couldn't be established with the Outbound message receiver at: 157.21.29.121:4996
Dec 3, 2008 11:27:05 AM com.lsc.hl7.handler.THOutboundProperties log
INFO: Thread-3::Wed Dec 03 11:27:05 EST 2008 : resetConnection-->Trying to reconnect[in IOException]........
The Message is: Connection refused: connect
The exception trace is :
java.net.PlainSocketImpl.socketConnect(Native Method)
java.net.PlainSocketImpl.doConnect(Unknown Source)
java.net.PlainSocketImpl.connectToAddress(Unknown Source)
java.net.PlainSocketImpl.connect(Unknown Source)
java.net.SocksSocketImpl.connect(Unknown Source)
java.net.Socket.connect(Unknown Source)
java.net.Socket.connect(Unknown Source)
com.lsc.hl7.handler.THOutboundConnHandler.resetConnection(THOutboundConnHandler.java:129)
com.lsc.hl7.handler.THOBHandlerThread.sendMailAndLogAboutORUReceiverConnectionLoss(THOBHandlerThread.java:199)
com.lsc.hl7.handler.THOBHandlerThread.run(THOBHandlerThread.java:118)

Cleaning- HELP!

After cleaning a stain from my macbook there is the mark of where I have tried to rub it off ,which isn't coming of. How do I clean this?

Hi emz815,
If the mark is more of surface wear off, then you out of luck since the wear off surface cannot be cleaned anymore.
But if it only a hard to erase smudge you might have luck using apple recommended cleaning solvent.
Good Luck.

Normal sockets vs Datagram PLZ help

Everybody talks about packets when talking about protocols and standards. Like: Server send packet with this in it and then you send a packet with that in it.... Can I connect to such server with normal socket and not datagram one? Can I connect to HTML server with normal stram socket? I mean, I every description of how server and clients communicate that I've found so far developers are desribing packets. So can it connect with normal streaming socket to anything else than other Java applications running server?

With Java, you never have to worry about packets. The Socket and TCP/IP layer of the computer handles all of that stuff for you. The only thing you have to deal with is the input and output streams, which just send bytes back and forth. Most of the time, you can be sure that when you send a bunch of bytes with a socket, the computer on the other probably recieved them, and in the same order as you sent them. Thus is the magic of TCP.
You can use a Socket object to connect to any server, on any port, using any protocol, as long as it accepts TCP connections.
Datagrams are another thing entirely. They model discreet messages rather than the continuous communication of a TCP Socket. Think about the difference between a telephone call (Socket) and sending something in the mail (Datagram).

Diskpart Clean: help

I am installing Windows 8.1 Pro from a USB drive.
I am in the set up tool just past the product key, it then asks simple or advanced install and I selected install.
I enter Shift + f10 to go into the command prompt.
And I key in:
Select Disk 0 (that is the only disk)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS
ACTIVE
EXIT
Then I go back to the install setup GUI, and I select Disk 0 and when I click on next, the setup wizard gives me the error message "Cannot locate Partition"
Any idea on what commands I need to perform to prep my disk so that Windows can continue with the install?
Thank you

Hi Jwconk,
I did not find anything wrong from your command. Try using following sample.
Select Disk 0
Clean
Create Partition Primary Size=　
Active
Format fs=ntfs quick
assign letter=c:　　
Exit
Exit
Try assign letter after active your partition and make sure you run all commands successfully.
If the error still persists I don't think this error is caused by wrong command, try using GUI to create partition on your hard disk for good measure.
There is one possibility that your hard drive may be using a GPT table and you didn't boot your installation CD or USB from EFI mode. If the installation CD boots in the legacy mode, it is not able to handle the GPT table.
Regards
D. Wu

Socket A Heatsink Cleaning Help!!!

Similar Messages

Maybe you are looking for