Socket extension or need Master moving?

Hi. Need advice before I finalise/speak to the engineer/bt about how I'm going to get FTTC working in my property. Property shaped like an L - has master socket positioned at approx the right angle of the L. Only access out (3 sides 3-5' thick solid stone wall) is to the right side of the L ->. Existing bb connection at the very top of the L via a standard phone extension (not bt) approx 25' from the master socket. This is I understand not going to work for a fibre modem. Realistically the existing cable is going to be very very hard to follow or retrace (its buried under plaster inside a 4' thick wall. What will Bt do at no cost or at cost if I am foolish enough to try to get down a very old property to the existing point as an extension or to enable it as the master?. What cost options are involved in doubling back out of the back door (location of master socket) and running outside the building to the existing secondary socket and drilling back inside? Or is there some practical alternative that anyone can suggest Wifi travels about 10' in the house and probably won't even leave the area 4' around the existing master socket so not practical I think.

pbwpu wrote:
ray_dorset wrote:
No, it just has to be copper and twisted-pair - which CAT5 is.
As standard phone cable its not twisted pair is it.
Well, yes it is but maybe your cable isn't. Only you know that.
If you found this post helpful, please click on the star on the left
If not, I'll try again

Similar Messages

  • Want to upgrade to Infinity but need master socket...

    Our master socket is under the stairs, which will mean that it will soon be at the back of a cupboard so we need it moved so that it is in the living room where our router is.  We have had problems for several months now with our Hub 3 constantly dropping the internet connection with BT and am hoping that once socket is moved, upgrading will be a worthwhile option.   We have been all round the website and can't find out if/how we can get somebody out to do this. 

    Hi Katzz,
    Thanks for posting. If you want to move the master socket it's called an internal shift which carries a charge of £130. You might want to consider powerline adaptors as an alternative. Let me know what you think.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Updating Material Master Moving Average Price using BAPI

    Hi,
    We need to create a program using which we can update material master moving average price for a specific material.
    For this we are using BAPI_MATERIAL_SAVEDATA.
    when we are executing this bapi with inputs, it is showing data updated or created but when we are checking it in MAterial Master the data (MOving Price ) is not getting updated.
    Please advise,
    Thanks.

    I am trying to use BAPI_MATVAL_PRICE_CHANGE to change the price of a material in material master
    (The moving average price [MAP] in Accounting View 1)
    Using the BAPI, I enter
    --> RFC target are
    -> Material No.
    -> Valuation Area
    --> Prices table (I enter the new price that i want)
    when I run the BAPI, i get error message (This can be seen in the returns table)
    ID --> CKMLSENDPRICE
    MESSAGE NUMBER --> 701
    DETAILS --> No customizing data for Valuation Area XXXX found
    PLease advise.

  • I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty  box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable?

    I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty  box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable? Any ideas

    Try dragging the image to the desktop, then drag the image to the slide you want it on

  • Material Master Moving Ave. price automatic in Purchase Order

    Hi Experts!
    Good day! Does anyone know how I can configure the Material Master Moving Ave. Price to be automatically reflected in a Purchase Order?
    Actually I am doing a Stock Transfer Order, and I want that the Moving Ave. Price maintained in the Material Master reflected in the order.
    Thank you!
    Mik

    take an abaper help , user exit
    table MBEW  filed VERPR  from  mat master to doc type( PO doc type) , MEPO1211,NETPR .
    rewds

  • How to get Material Master Moving average price into Purchase Order

    Hi,
    How to get Material master moving average price into purchase order instead of Purchase Info record.
    Thanks,
    Sridhar

    Hi,
            I  cannot understand whether it is necessary .
           How about as following step?
                 1. create Purcahse requisition
                                Price come form moving average price in material master.
                 2. Create Purchase order reference Purchase  requisition
                                There is a setting  from the unit price of P/R onto the unit price of P/O.
      Regards,
         Gaito

  • I need help moving my Photoshop 7 from my old laptop to my new laptop which is running Windows 7 Enterprise.  I've tried two routes unsuccessfully.  I install the CD, it does not autoplay.  I execute Autoplay.exe at the root directory, I am welcomed, I ch

    I need help moving my Photoshop 7 from my old laptop to my new laptop which is running Windows 7 Enterprise. I’ve tried two routes unsuccessfully. I install the CD, it does not autoplay. I execute Autoplay.exe at the root directory, I am welcomed, I choose English, I accept the EULA, I get the Install/Explore choices window, with the Install button already selected, I click the Photoshop button, the CD spins, and nothing happens.  In the 2nd attempt I execute Setup.exe in the Photoshop directory, and nothing happens at all.  I’m never even offered the opportunity to enter my product code. What should I do?

    There could is likely a compatibility problem between the old software and the newer operating system.

  • I am working on a program book in Pages...need help moving pages around...

    I am working on a program book in Pages...need help moving pages around...

    I think word procession mode but I used a magazine template to get started and then just kept adding blank pages to finish...I have done these before without any trouble moving the pages around...so very confused.  Thanks for any assistance. 

  • What extension is needed to enable video from the Cleveland Browns web site?

    What extension is needed to enable video from the Cleveland Browns web site? Video and movies play everywhere on the iMac OS 10.9.2 and my Safari 7.0.2  browser except on Cleve.Browns site. I had it working earlier but after a crash I must have made some changes and video is no longer available on that site?

    Thank you for the suggestion but my Safari uses 12.0.077 Flash PLayer and the video on the Browns' site still does not respond. Works OK on FireFox but not at all on Safari.

  • Need help moving videos/photos from Galaxy S4 to iMac

    need help moving videos/photos from Galaxy S4 to iMac
    Samsung's utility Kies is awful
    Hlpe please

    did this
    import photos from android to mac
    got this, try it
    http://www.phototransferapp.com/help/android/transfer_photos_from_your_android_t o_your_mac/
    or use the first link to try some of the google hits for ways to get photos from android devices into osx

  • I just bought and installed the Adobe Illustrator. I would like to know how long can I use the product before an extension is needed?

    I just bought and installed the Adobe Illustrator. I would like to know how long can I use the product before an extension is needed?  And on how many computers can I install this product? Thanks.

    What version exactly did you buy? If you bought CS6, then the license is perpetual and doesn't need any extension. If you bought CC, then you need to renew your plan every year. You can install each Adobe software on 2 machines with a single license for non-concurrent use.
    Mylenium

  • Java 8 Java Secure Socket Extension (JSSE)

    Will there any chnages in Java Secure Socket Extension (JSSE) implementation on JDK 8.

    See here. 10 seconds in Google.

  • Mass extension of material master to differnt sales area

    Hi,
    How can we extend material master to different sales area enmasse.?
    Regards
    Kantha

    A material master is not just linked to a sales area.
    you have to create sales views per sales org and distribution channel.
    there are many fields in there that need to be maintained, SAP stores this info in table KNVV
    if all data in the new sales area is equal to an existing sales area, then you can easily extend using MM17, if not, then you have to use LSMW.
    MMSC_MASS is for storage location extension, this is certainly not a transaction to create sales area data views.

  • Double electric socket next to BT master socket

    I want to upgrade to BT Infinity, however, I am told I must have a double electric socket next to the BT master socket. I don’t know why. Is it essential as currently I don’t have one in that place.
    Solved!
    Go to Solution.

    Actually it isn’t a requirement to have them “next to” the master socket.
    You will need a socket for the modem and another for the Home Hub (or a double adapter or a 4 way) but the installer can run a thin CAT 5 cable from the BT master to the modem (up to 30metres) and then the HH is connected by normal CAT 5 cable (up to 100 metres)
    In my case the modem is about 3 metres from the BT socket and the HH is about 8 metres from the modem.

  • Query re hard wired extension from double master s...

    I have a double master socket - old LJ5/1A type. From this is a hard wired extension. From this extension's socket I have run a "plug in" extension upstairs to a filtered ADSL and phone faceplate. I am experiencing very slow download speeds and I am wondering if my "extension to extension" is the wrong type of set up. Without taking the double socket master faceplate apart, which I am reluctant to do, I do not know if there is a bell wire anywhere in my set up causing interference. Any advice would be appreciated please.
    Regards
    John F
    “Dogs come when they're called; cats take a message and get back to you later.”
    Mary Bly

    Ooops sorry. Misunderstood. Good idea, but I don't know whether or not that will work in my set up. I understand they work due to the properties of the ring main. Problem is in my case, I have one ring main downstairs and a separate ring main upstairs., (two miniature circuit breakers in the consumer unit). Do you know if they would work on two separate ring mains?
    Updated reply:
    Went onto site where these devices are sold. Apparently they can be used on two separate ring mains.
    "Would HomePlugs work on different mains circuits (rings) in my house ?
    There is mis-information about this subject on the web - the answer is Yes - limitations are as follows - the rings or circuits (such as upstairs and downstairs) mains must be on the same fuse box / consumer box. - if you have other configurations just call and we will do our best to advise."
    Regards
    John F
    “Dogs come when they're called; cats take a message and get back to you later.”
    Mary Bly

Maybe you are looking for

  • Can no longer see my inbox or my other e-mail accounts

    I have 3 e-mail accounts on my iphone 4....I've got my work e-mail, my gmail and my icloud mail.  I used to be able to click on the Mail app and it would go straight into the list of mailboxes that I have.  I could click on a mailbox and it would go

  • Dynamic list of values in CR 2008 - request of login to database

    I am using CR2008 with VB2005. I created simple application which generate report on different SQL Server 2005 databases. Report uses OLE.DB connection to SQL Server, I pass logon information in VB using "SA" username and password. The same simple re

  • How do I create a group contact for imessage?

    Is there anyway to create a group contact for iMessage text messaging?

  • Multiple instances of reentrant VI in a modular way

    Is there a way to have a VI run multiple instances (in parallel) of the same reentrant subVI in a modular way, i.e. the VI needs to call n number of instances? Other than having n copies of the reentrant subVI hardwired in the calling VI (which is ob

  • Configuring the Adapter

    All, I configured the apps adapter by giving the IP address, user name & pwd in my BPEL process. Is there any file, can we set these parameters so that in later stage if I want to change some of the configuration, I need not touch the BPEL process ra