Socket problem accessing sever EE5
hi,
Has y see there is not many support on EE5 SDK.
I just install EE5 (full option) and i find out that when i start the server it look like it is succeful on the cmd windows.
But at the sema time i got hundreds socket opening port. And off course i cannot acces the port 8080 with my browser.
But when i look at the relle connection this my port scan tools. I find ou that the port 8080 it alocated to the localhost 0.0.0.0 and that all the pther port open are located to localhost 127.0.0.1
It look like the socket opened on port 8080 is not accessible but open.
And all this other socket try to make a connection with one of the
8080,4848 ecxt.. port who are allocated to 0.0.0.0
It is my windows wirewall how is responsible of that or i need to instruct the server that the ip addres must be 127.0.0.1 or whatever.
Regards
Herve Terrolle
I cannot acces the port 8080 with my browser.
when i look at the connections with my port
scan tools. I find that the port 8080 it allocated
to the localhost 0.0.0.0 and that all the other port
open are located to localhost 127.0.0.1If you bind a port to listen on the localhost interface, it only listens on localhost.
If you don't specify the interface, it listens on all interfaces - shown as 0.0.0.0
It look like the socket opened on port 8080 is not
accessible but open.
And all this other socket try to make a connection
with one of the
8080,4848 etc. port who are allocated to 0.0.0.0
It is my windows firewall how is responsible of thatYes, most likely.
Similar Messages
-
in use:
vRO 5.1
eclipse 3.7.2
vRo plug-sdk 5.1
steps:
1.create a plug-in project from samples(choose solar system)
2.find the dar package and upload it by vRo configuration
3.vRo configuration said upload successfully,but the solar system configuration is not properly configued..
problem:
Problem accessing /config_general/null/Default.action Reason:There is no Action mapped for namespace/ config_general and action name default
How to solve it??
Thanks so much!!There was problem from crm side...its working now..
-
Hi
I am very new to updating my iPod touch and this is the first time I've used the iCloud. However, I am having problems accessing any apps on my iCloud such as photos, reminders etc. I've set it up on my iPod touch successfully and I can sign in on my PC. However, when I try to access any of the apps it says there was a problem. It doesn't tell me how to fix it or what the problem is.
Is anyone able to help?It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
Problems accessing Music Files in Slideshow module in LR 2.6 and Windows 7 64 bit
Just got new computer 64 bit Windows 7. Installed LR 2.6 and am having problem with slideshow and music. Never had this problem before with my XP computer. When I open up slideshow module and go to Playback window and check soundtrack and try to choose a music folder, I have a new problem. It opens up "Browse for Files & Folders" dialog box as usual, but it only lets me browse on my desktop or my User name on the C drive. My music is in my F drive where my data is stored. I've never had a problem accessing my music in my F drive in my XP computer, but this setup limits where I can browse to. Interesetingly, this works OK in LR 3 beta on this WIndows 7 PC where it opens up a dialog box "Choose a music file to play" which gives me access to all my drives. In summary, I can't access music files stored on a drive other than my C drive using LR 2.6 on a Windows 7 64 bit computer.
I have attached a screen shot to compare the new Windows 7 Browse for Files & Folders dialog box to that in my XP computer.
Would appreciate any suggestions.
Thanks,
Matthew KrausThanks for the reply. I went through the process you suggested to change Ownership & grant permission to access files. When I get to the owner tab in Advanced Security Settings....I am already the current owner of this folder.
What do I do now?
Thanks,
Matthew Kraus -
Problems accessing Time Capsule on windows Vista
I have an iMac running Leopard and a laptop running Vista Home Edition. I'm having some problems accessing Time Capsule from the Vista machine. everytime I click to access the drive, a message appears in the menu bar of the window that says (not responding). I've tried leaving it. I've even changed my entire wireless network to bypass the original g router (belkin) to use TC, so I now have TC as my router, Belkin just setup as a wired broadband modem but I still get the same problem. The mac seems fine, although I have had quite a few issues with drop outs.
both machines have the latest version of Airport Utility and Bonjour.
The laptop is a recent purchase to replace a dead XP machine, this worked fine and I managed to get stuff backed up just before it died, thankgod.
Any help appreciated.No problem seeing Time Capsule with iMac, Dell desktop XP Home, Dell notebook XP Pro, and Fusion with XP Pro. All installed according to the installation guide. Installed AirPort Utility on all machines and updated firmware to 7.3.1. To see the other machines, make sure file sharing is on. Firewall on the PCs may need to be turned off. The printer plugged into the USB port also worked with all the XP systems and the iMac with a few missing features on iMac (I am assuming different driver issues). BTW, logging onto the created network and accessing the Time Capsule HD are separate. If you've entered different passwords for the HD and wireless networking when setting up Time Capsule initially (which I did through the iMac first), you'll need to enter them separately with the XP machines. You could also try resetting Time Capsule. Seems to work for others.
-
Problem accessing adobe camera raw in Bridge for CS6
I have a problem accessing adobe camera raw in Bridge (CS6) directly, I get the message: "Bridge's parent application is not active; Bridge requires that qualifying product has been launched at least once to enable in Bridge or Accessing Photoshop directly, I get the message: "Bridge's parent application is not active; Bridge requires that qualifying product has been launched at least once to enable this feature." My software is registered with Adobe. Any solutions?feature." My software is registered with Adobe. Any solutions?
Creative Suite Cleaner Tool laufen lassen, neu installieren. Und was auch immer für ein dämliches Update den Schaden verursacht haben mag einfach nicht aufspielen, wenn nicht unbedingt nötig...
Mylenium -
Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"
Close iTunes, delete iTunes Library Extras.itdb from your iTunes folder, start iTunes. iTunes should rebuild the file automatically.
tt2 -
Exchange setup error: "There was a problem accessing the registry on this computer"
Hi,
i am trying to install Exchange 2007 SP1 in a Windows 2003 Server standard 32 bits version.
During the "Readiness checks" i received the next error in "Hub transport role prerequisites":
Error:
There was a problem accessing the registry on this computer. This may happen if the Remote Registry service is not running; it may also indicate a network problem.
Remote Registry service is running. I've searched for the error in google and in some topics appears that the error is due to the "Client for Microsoft Networks" and "File and Printer Sharing" is not installed in the LAN properties. The server has 2 network cards and in both of them is checked. One of the connections is disabled.
I dont know what more to do, any help will be appreciated.
ThanksNo, firewall is disabled.
Setup Logs says:
10:50:04.890: Starting Collecting Data phase.
10:50:04.921: No mapping between account names and security IDs was done
10:50:04.984: Error (Unexpected error [0x674CBB7E] while executing command '[Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName)'.) trying to process object [Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName), skipping object.
10:50:06.093: Completed Collecting Data phase.
10:50:06.125: Error (Rule name 'PreReq_fPassiveUninstallNoCMSPresentKey' referenced by rule 'PreReq_fPassiveUninstallNoCMSPresent' in input file is not defined) in format of rules in configuration file.
10:50:06.171: Starting Postprocessing Rules phase.
10:50:06.187: Completed Postprocessing Rules phase.
Thanks for your help! -
Problem accessing R/3 with SSO ticket from the EP6.0
Hi all,
I have seen this thread: Problem accessing R/3 with SSO ticket from the EP6.0
I know that it is possible to read SSO ticket from the Cookie in WebDynpro application.
Now we are at the first step, we don't know how to read SSO ticket from the Cookie in WebDynpro application with java code.
So anyone can help us?Hi,
This has been discussed in a previous forum.Check this link.A code snippet is also there to read a cookie in webdynpro with this question
How to implement SSO between Portal, Webdypro and ABAP system?
I am not able to send the link exactly.
Regards,
Sowjanya.
Message was edited by: Sowjanya Chintala -
Problem accessing another public ip in same subnet
Hi,
I have searched around for a previous post regarding this but can't find an issue similar to mine (or I'm just too stupid to understand that it is )
I have a Cisco 5505 at a small business that I help. The problem is that the ISP are providing public IPs to multiple customers in a /24 subnet. The ASA has a single public IP configured 8.8.8.8 (not really, just for the examples sake) with a subnet mask of 255.255.255.0.
The webserver I have to access is not managed by me and is located in a different location (same town though) has 8.8.8.115, it is located in the same subnet as the ASA.
How would I make this work? I have tried to configure a static arp entry for the web server but it just won't work. If i place a computer directly on the outside interface I have no problem accessing the web server.
I am running ASA version 8.2, but I could upgrade if it would help me solve the problem.
Any help with this issue is much appreciated.The ISP only specify one gateway in that range and that is 8.8.8.1 so any other would not let me access internet.
Once again thank you for your time.
: Saved
ASA Version 8.2(1)
hostname ciscoasa
domain-name XXXXXXX
enable password XXXXXXX encrypted
passwd XXXXXXX encrypted
names
name 8.8.8.8 Outside_IP
name 192.168.20.2 Server
name 192.168.20.11 rav-dc01
name 192.168.20.12 rav-ms01
name 192.168.20.13 rav-rds01
interface Vlan1
nameif inside
security-level 100
ip address 192.168.20.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address Outside_IP 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa821-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name XXXXXXX
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list inside_nat0_outbound extended permit ip any 192.168.25.0 255.255.255.0
access-list RemoteVPNSplittunnel standard permit 192.168.20.0 255.255.255.0
access-list outside_access_in extended permit tcp host 100.100.100.228 interface outside eq 3389
access-list outside_access_in extended permit tcp any interface outside eq smtp
access-list outside_access_in extended permit udp any interface outside eq 4125
access-list outside_access_in extended permit tcp any interface outside eq 4125
access-list outside_access_in extended permit tcp any interface outside eq https
access-list outside_access_in extended permit tcp any interface outside eq pptp
access-list outside_access_in extended permit tcp any interface outside eq 444
access-list outside_access_in extended permit gre any interface outside
access-list outside_access_in extended permit udp any interface outside eq 444
access-list outside_access_in extended permit tcp any interface outside eq www
access-list inside_access_in extended permit tcp host rav-ms01 any eq smtp
access-list inside_access_in extended deny tcp any any eq smtp
access-list inside_access_in extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool RemoteVPNPool 192.168.25.100-192.168.25.200 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) udp interface 4125 Server 4125 netmask 255.255.255.255
static (inside,outside) tcp interface 4125 Server 4125 netmask 255.255.255.255
static (inside,outside) tcp interface https rav-ms01 https netmask 255.255.255.255 dns
static (inside,outside) tcp interface pptp Server pptp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 rav-rds01 3389 netmask 255.255.255.255 dns
static (inside,outside) tcp interface smtp rav-ms01 smtp netmask 255.255.255.255
static (inside,outside) udp interface 444 Server 444 netmask 255.255.255.255
static (inside,outside) tcp interface 444 Server 444 netmask 255.255.255.255
static (inside,outside) tcp interface www Server www netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 8.8.8.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server rav_Intern protocol radius
aaa-server rav_Intern (inside) host rav-dc01
key CiscoAsa5505RAV2012
radius-common-pw CiscoAsa5505RAV2012
http server enable 8080
http 192.168.20.0 255.255.255.0 inside
http 192.168.25.0 255.255.255.0 inside
http 100.100.101.128 255.255.255.192 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection timewait
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
telnet 192.168.20.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.20.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
management-access inside
dhcpd auto_config outside
dhcpd address 192.168.20.190-192.168.20.200 inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server rav-dc01 source inside
webvpn
group-policy RemoteVPN internal
group-policy RemoteVPN attributes
wins-server value 192.168.20.11
dns-server value 192.168.20.11
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value RemoteVPNSplittunnel
default-domain value rav.nu
split-dns value rav.nu
username SupportVPN password XXXXXXX encrypted privilege 0
username SupportVPN attributes
vpn-group-policy RemoteVPN
tunnel-group RemoteVPN type remote-access
tunnel-group RemoteVPN general-attributes
address-pool RemoteVPNPool
authentication-server-group rav_Intern
accounting-server-group rav_Intern
default-group-policy RemoteVPN
tunnel-group RemoteVPN ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect pptp
inspect icmp
inspect icmp error
service-policy global_policy global
prompt hostname context
Cryptochecksum:8481ab3aa01b23bad17bacb2aca7197a
: end
asdm image disk0:/asdm-621.bin
no asdm history enable -
[ETL]Could you please help with a problem accessing UML stereotype attributes ?
Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank youHi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana -
Equium A100-027 PSAAQ - having problems accessing Internet with WLan
Just installed WXP on my Equium A100-027 (PSAAQ) as Vista did not like. Now am having problems accessing Internet. What drivers do I need to download and how do I install them?
Thanks.Hi,
I would suggest you to check the driver site of toshiba
-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
search for your machine and download the wlan drivers. If you dont know which one you need just download all of them and install em, one of that drivers MUST work. ;)
Greets -
I have problem access ICloud with active pasword
I have problem access ICloud with active pasword
In the Iphone I don't have problem
TanksWelcome to the Apple Community.
Try restarting your browser or clearing its cache. -
Problem accessing variables from java file to JSP page
Hello Everyone,
I have small problem accessing my method variables from my java bean file to a JSP page. can some please take a look and tell me why I can't populate my JSP page, I've been trying all day to get this done!!!
This is my Java file
package dev;
import java.io.*;
import java.util.*;
public class RoundDetail2
public String string_gameID;
public int string_card1;
public String readDetail_topLayer;
public static final String SUITS[] = {" ", "Clubs", "Hearts", "Spades", "Diamonds", "Joker", "FaceDown"};
public static final String VALUES[] = {"Joker ","Ace", "Two", "Three", "Four", "Five", "Six", "Seven", "Eight", "Nine", "Ten", "Jack", "Queen", "King"};
public static final String SuitVALUES[] = {" ","1","2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14"};
public RoundDetail2() throws FileNotFoundException
DataInputStream inFile=
new DataInputStream(
new BufferedInputStream(
new FileInputStream("C:/apps/jakarta-tomcat-4.0.6/webapps/ROOT/WEB-INF/classes/dev/Data_452SY2.txt")));
try {
while((readDetail_topLayer = inFile.readLine()) != null)
StringTokenizer tokenizer_topLayer = new StringTokenizer(readDetail_topLayer,"\t", true);
while (tokenizer_topLayer.hasMoreTokens())
string_gameID = tokenizer_topLayer.nextToken();
catch(IOException e)
System.out.println(e.getMessage());
Thanks KT......How are you declaring the class in your JSP? ... are you instantiating it as a bean using the useBean tag, or just instantiating it in your code like normal.
Maybe you could post the relevant JSP code too?
Hello again,
Only the last string is populating after the file has be tokenized. What I'll like to accomplish is passing the very first string in the file. I did not get too far in the JSP file setup because the code is still in it's testing stage, but any help will be highly appreciated.
Here is the JSP code
<%@page import="dev.*" %>
<%@page session="true" language="java" import="java.io.*" %>
<jsp:useBean id="wagerhist" scope="request" class="dev.RoundDetail2" />
<html>
<head>
<title>Round Detail</title>
<body>
<table width="530" bordercolor="#000000" valign="top">
<tr>
<td align="left" width="19%">Game ID<%=wagerhist.string_gameID%></td>
<td align="left" width="30%"> </td>
<td align="left" width="20%">card1</td>
<td align="left" width="31%"> </td>
</tr>
</table>
</body>
</html> -
What is the easiest way to access the router from an iPad? I have no problems accessing it from my laptop. Even though I am entering the address in the left address box, not the Google search box, it wants to do either a search, or add www to the beginning of the IP address.
I usually can eventually access the router, but it is way to much trouble. However, I use my iPad hundreds of times more often than my laptop.Are you typing http:// in front of the IP address of the router? e.g. http://192.168.0.1
Sometimes, and with some routers it doesn't seem to like it if you miss off the http://
Maybe you are looking for
-
Web template with HTML framset not working after transport
Hi, I've built a frameset which consists of two web-templates (role-menu and content area) those two are combined together using plain HTML which does not acontain any web items (uploaded via WAD). This works fine in development. After transporting t
-
Mighty Mouse track ball button
I have been using Snow Leopard for a while and one of the things that I like the most is that I can choose what I want to see in my screen when I move my cursor to the lower right or left corner. I have it set up as to SHOW ALL WINDOWS if I move my c
-
HT2731 Change email address in the Apps store
I have changed my Apple ID, but when I go to the App Store, it still shows my old address. How do I fix this?
-
How can I play old Apple System 7 games on a new imac?
I would like to play some of the old games that I loved thirty years ago when I bought a Mac SE. My kids loved Cairo Shootout, Mille Bourne, Birds, and the old Rogue (still have the floppy!). Is there a straightforward way to do that, without violati
-
Publishing does not clear cache on secondary node on the cluster
Hello, I am publishing assets from Management to Delivery. Delivery consists of 2 nodes, one of which is the publish destination for the management. So, after a publish, I could see the updated content on Delivery 1 (cs/Satellite) but Delivery 2 (cs/