SOCKS Server Authentication- Failed

I am trying to access server through putty,sockes is configured, i am able to access one server, but when i am trying to access other server, its ask for SOCKS Server Authentication , username box is filled with my windows username, when i give pw it give username/pw errer...any idea to fix this?

Please, please try to be much more precise about what you've done and what is configured. the question you are asking now this way can only be solved by the forum by either luck or clairvoyance.
please answer the following questions:
you've got a client with putty as an ssh client. is there any configuration done on putty? if yes, what?
there's one host you can access apparently. is that host on the same network, or is the socks proxy needed to access that host? is there any configuration been done in putty for this specific host? (click on the host specification in putty, then click 'load'; that way the settings for that host are loaded. next look in the properties if there's some configuration been done)
there's one host you can't access apparently. is that host on the same network,or is the socks proxy needed to access that host? is the configuration of this host different from the latter one?

Similar Messages

Running reports: "REP-0238: Security server authentication failed"

Good afternoon,
I installed Oracle9iAS Release 2 v.9.0.2 (Application Server) on Sun-Solaris as well as
Oracle 9iAS Reports Services module. I simply want to run a report from a command line
rwserver.sh. I constantly get the message "REP-0238: Security server authentication failed".
What is to be done to enable authentication?
Thanks.
GM.

hello,
a) rwserver.sh is the script to start a reports server. if you want to run a reports-job you should either use the command rwclient or use the servlet via a web-browser.
b) when installing iAS R2 the reports server is running in secure mode. this means when you run a report via the browser you will get a login-screen where you have to provide a vaild SSO username/password. if you are running from the commandline, you have to provide the paramter AUTHID passing a valid SSO username/password.
regards,
philipp

Discussion Server Authentication Failed From Inside FMW App

Hi Community,
My Env:
Webcenter 11.1.1.3.0
Weblogic 10.3.3
The discussion server shipped with webcenter suite is Jive Forums Silver 5.5.20 .2-oracle.
I wired the discussion server to embedded LDAP server of my weblogic server, and deployed an app that utilize the discussion service.
But when accessing the app page, I got an exception "failure to authenticate the user pbrown, due to: Authentication Failed".
The users do exist in LDAP server and I can login to http://server:8890/owc_discussions page with that users, I also granted all privileges to the users in jive console, but it doesn't work inside the app.
My Jive server log:
[2010-09-05T23:21:22.816-07:00] [WLS_Services] [ERROR] [] [org.codehaus.xfire.handler.DefaultFaultHandler] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000If_hC7s5e_Vau1q2UH1CWBaI0000E_,0] [APP: owc_discussions#11.1.1.2.0] [dcid: bafcaeab2cd82008:-b3c6f44:12ad6d55fae:-8000-00000000000003c6] Fault occurred![[
com.jivesoftware.base.UnauthorizedException: Authentication Failed
at com.jivesoftware.forum.webservices.server.xfire.PermissionHandler.acquireAuthToken(PermissionHandler.java:194)
at com.jivesoftware.forum.webservices.server.xfire.PermissionHandler.invoke(PermissionHandler.java:98)
at org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
at org.codehaus.xfire.transport.DefaultEndpoint.onReceive(DefaultEndpoint.java:64)
at org.codehaus.xfire.transport.AbstractChannel.receive(AbstractChannel.java:39)
at org.codehaus.xfire.transport.http.XFireServletController.invoke(XFireServletController.java:287)
at org.codehaus.xfire.transport.http.XFireServletController.doService(XFireServletController.java:130)
at org.codehaus.xfire.transport.http.XFireServlet.doPost(XFireServlet.java:117)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.opensymphony.webwork.dispatcher.FilterDispatcher.doFilter(FilterDispatcher.java:189)
at com.jivesoftware.base.action.util.JiveFilterDispatcher.doFilter(JiveFilterDispatcher.java:69)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.jivesoftware.base.util.webwork.JiveActionContextCleanUp.doFilter(JiveActionContextCleanUp.java:38)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Log of the server that hosts the app:
[2010-09-05T23:21:08.184-07:00] [AdminServer] [WARNING] [] [oracle.adf.controller.internal.metadata.MetadataService] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000If_h8YC5e_Vau1q2UH1CWBIO0001Nc,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-0000000000001665] ADFc: /WEB-INF/adfc-config.xml:
[2010-09-05T23:21:08.185-07:00] [AdminServer] [WARNING] [ADFC-52024] [oracle.adf.controller.internal.metadata.MetadataService] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000If_h8YC5e_Vau1q2UH1CWBIO0001Nc,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-0000000000001665] [arg: shoppingCartBean] ADFc: Duplicate managed bean definition for 'shoppingCartBean' detected.
[2010-09-05T23:21:08.190-07:00] [AdminServer] [ERROR] [] [org.apache.myfaces.trinidadinternal.application.StateManagerImpl] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000If_h8YC5e_Vau1q2UH1CWBIO0001Nc,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-0000000000001665] Could not find saved view state for token uutg3hslp
[2010-09-05T23:21:11.851-07:00] [AdminServer] [WARNING] [] [oracle.adfinternal.view.faces.renderkit.rich.NavigationPaneRenderer] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000If_h9SE5e_Vau1q2UH1CWBIO0001Ni,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-000000000000166f] Warning: There are no items to render for this level
[2010-09-05T23:21:22.821-07:00] [AdminServer] [WARNING] [WCS-04013] [oracle.webcenter.collab.forum.internal.view.backing] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: pbrown] [ecid: 0000If_hC765e_Vau1q2UH1CWBIO0001Nm,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-0000000000001673] [arg: pbrown] [arg: Authentication Failed] failure to authenticate the user pbrown, due to: Authentication Failed[[
oracle.webcenter.collab.share.LoginFailedException: failure to authenticate the user pbrown, due to: Authentication Failed
at oracle.webcenter.collab.forum.internal.jive.JiveAuthenticator.handleException(JiveAuthenticator.java:304)
at oracle.webcenter.collab.forum.internal.jive.JiveAuthenticator.login(JiveAuthenticator.java:247)
at oracle.webcenter.collab.forum.internal.jive.JiveForumSession.login(JiveForumSession.java:128)
at oracle.webcenter.collab.share.Session$1.call(Session.java:353)
at oracle.webcenter.collab.share.Session$1.call(Session.java:347)
at oracle.webcenter.concurrent.Submission$2.run(Submission.java:406)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.webcenter.concurrent.Submission.runAsPrivileged(Submission.java:420)
at oracle.webcenter.concurrent.Submission.run(Submission.java:347)
at oracle.webcenter.concurrent.Submission$SubmissionFutureTask.run(Submission.java:737)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:442)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:139)
at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.runTask(ModifiedThreadPoolExecutor.java:657)
at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.run(ModifiedThreadPoolExecutor.java:683)
at java.lang.Thread.run(Thread.java:619)
Caused by: Authentication Failed
Thanks,
Todd

I have same problem here. used weblogic admin but still doesnt works. Thats amazing or not?
oracle.webcenter.collab.share.LoginFailedException: failure to authenticate the user Weblogic, due to: Authentication Failed
Edited by: José Carlos on 06/09/2010 06:56

REP-0238: Security server authentication failed.

when I tried to call report(s) from java swing application using rwclient I am getting the following error:
REP-0238: Security server authenticatin failed.
Looks like Single server sign-on is on and I am using orace9ias(9.0.2) on windows 2000.
Could some one help me...
Thanks,
Raju

Hi Raju,
Looks like Single server sign-on is on Single Sign-on is applicable when you authenticate yourself using a browser, and not applicable in your case (you are using rwclient). The meaning of single sign-on is that if you authenticate yourself once (eg, while accessing your application or a portal page or another report), in the same browser session you should not be asked for authentication again. As I said, this is not applicable for rwclient requests. For rwclient requests, you have to authenticate yourself in every request.
However, though single sign-on is not applicable, server security is still enforced while you are using rwclient. That is, only authorized users can access the secure reports server and secure reports. So what you should do is provide the credentials for accessing the reports server in your request like this:
rwclient report=.... server=... authid=username/password
The usernbame password above are for those users who have permission on the reports server and the report. You can set and view these permissions using Oracle Portal.
Let me now if you have further questions.
Navneet.

Wiki-Server, authentication fails with iPad

Hello everybody,
I have made a clean installation of OS X Server.
I see a strange behavior with Wiki. When I try to authenticate with the iPad it says: "Failed to log in sucessfully" ?? I can, however access the Wikis that are "publicly" available without any issue, but what about the "hidden" ones?!
When I use the Macbook, Firefox on a PC, or the iPhone then it's all fine. Authentication works as expected.
Am I missing here something?

I have this exact issue in my school, massively annoying being as we have a 1:1 rollout of over a thousand iPads and had invested considerable time developing resources on the wiki, and now, the only device it doesn't work on, is the same device that we have given to all our pupils.
Charles

Lion client OD bind to Lion server - Authentication Failed

Authenticated bind enabed via terminal command. Client and server are up to date. I've been able to bind Leopard, Snow Leopard, and Lion clients over the last few weeks before this MacBook Air but for some reason it keeps failing with an authentication error. I can log into WGM on the server using my Diradmin account without issue. This is the same account I'm attempting to bind with. I have a non-admin account that can bind clients and it too is failing on the client side. I've been Googling for hours and haven't identified a source or solution. Anyone have any thoughts? I'm just shy of demoting my OD master, promoting it, and re-importing my OD config. I don't want to though.

Hello michaelhoch,
could you find any solution?
I have the same setup: OS X Leopard Server 10.5.8, and Snow Leopard Clients. Everything worked fine. But now I get the first OS X Lion Client, and I can not use Mail, iChat, iCal and so on. I found the same errormessage in Console, and I think I also have a problem with the user directories on the server.
Tanhks
Michael

'authentication failed' using Microsoft ADSI version LDAP server

Hi All,
Now days i am facing some problem in authentication (i am using microsoft ADSI version LDAP Server) but am not able to authenticate the LDAP users.
I have configured my LDAP server in the same manner as u mentioned in this blog.
when I am trying to authenticate the user from the RPD itself i m gettig the following error:
“authentication failed” (actually i forgot the exact message but it mean is same as i referred here)
though i am able authenticate the bind user ( which i used to configure the LDAP Server)
Please help me in this as i already wasted a lot of time in doing R&D to make it work..
I have an urgent requirement to do the same..
Your help will highly appreciated…
thanks in advance
PS: I have checked the 'ADSI' box in advance tab:

Hi,
Please have a look at the below link:
Unknown certificate error when testing LDAP SSL connection
Not sure whether it will help you. But have a look at it.
Regards,
Jithin

Ical "authentication failed. your username and password were rejected by the server"

i've a pretty busy server, fully configured with correct DNS.
running 10.6.8, uptodate. i've stopped the ical service, and removed it from the server settings.
then i created a folder on my RAID /volumes/raid/ical, set its ownership to _calendar:_calendar (uid 93), rwx,rx,-
then added the iCal service back, and set the data store to this new folder.
authentication is set to digest (to reduce potential kerberos errors), with SSL on.
i then started the service
an existing user CANNOT connect to the caldav server. i get the error: ical "authentication failed. your username and password were rejected by the server".
if i create a NEW user, that user can correctly connect to the Caldav server. On first joining, an entry is created in the __uids__ folder and the calender works.
SO. WHAT IS GOING ON?
this is 10.6, so i do not have an option in WGM to 'enable calendering'. i've used the inspector to check for differences, but i can't see any.
help. please. and no comments about DNS. the fact i can get a new user to function means that is excluded. no comments about SSL. ditto. no comments about kerberos, its turned off. thanks.

I often think of things in terms of time it takes to figure out the solution to the problem vs time it takes to nuke and pave.
Dare I ask... How many users would you have to remake?
150 users would probably take 2 hours to recreate?
...Have you spent 2 hours on this problem yet? How about 4 or 6?
Perhaps you could have typed up 450 remade users so far!
I have a great idea as to how to change ownership of home folders to users after they're created.
Thoughts on the problem... (but don't spend too much time on it!)
What about crypt vs open directory password?
In WGM, select the user, click the advanced tab, and ensure that your users have OD based passwords?
...sometimes that pull-down menu displays OD, but it's not really. Try selecting OD, retype the password there, and save.
See if it works.
What about in server admin.... Select the server in question, click the access button at the top.
Ensure that your services are allowed for all users to use the iCal service.
In the iCal service in Server Admin...
Host name setting? It's a stretch as new users seem to work. Ensure it's correct?
For the sake of argument... Change authentication type to Any Method... If you're running OD on the server, Kerberos is running. I know that certain services require it even though you have the option. Perhaps iCal is being finiky without it?
I apologize if you've tried all these, but as a user forum, you'll typically get users that don't believe that you've tried the basics. It's honestly the best place to start. Seeing as we don't know what you've done, it's the best advice you'll get.
HTH
-Graham

EAP-TLS or PEAP authentication failed during SSL handshake to the ACS serve

We are running the LWAPP (2006 wlc's and 1242 AP's) and using the ACS 4.0 for authentication. Our users are
experiencing an issue, where they are successfully authenticated the first time, however as the number of them is increasing, they're starting to drop the connections and being prompted to re-authenticate. At this point, they are not being able to authenticate again.
We're using PEAP for the authentication and Win XP SP2 clients as the supplicants. The error message that we are seeing on the ACS for that controller is "EAP-TLS or PEAP authentication failed during SSL handshake to the ACS server"...Not sure if this error msg is relevant since we have other WLC's that are working OK and still generating the same error msg on the ACS...
Thanks..

Here are some configs you can try:
config advanced eap identity-request-timeout 120
config advanced eap identity-request-retries 20
config advanced eap request-timeout 120
config advanced eap request-retries 20
save config

Authentication failed binding to mac server 2.2.1

I have setup a new Mac Mini Server running Mountain Lion 10.8.2 and OS X Server 2.2.1. I am trying to join my Macbook Pro to Open Directory however it continues to fail. It does prompt with the SSL warning which I select continue on, however when I enter the diradmin username and password I get an Authentication Failed message when binding. I can access the directory via workgroup manager ok and I have also been able to join my Synology NAS to the Directory Service first time.
Baffled and scratching my head. Any ideas?

Server Version is 2.2.1 and it's installed on a Mac Mini Server running 10.8.2. Just a single OD server at present.
Future project: Can we make a Synology NAS which can also a be a Open Directory Server act as a Domain Replica?

Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user denied

Hi,
when I want to start managed server :
<Sep 5, 2014 4:56:12 PM GST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user denied
weblogic.security.SecurityInitializationException: Authentication for user denied
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:966)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
        at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
        at weblogic.security.SecurityService.start(SecurityService.java:141)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User javax.security.auth.login.LoginException: [Security:090301]Password Not Supplied
        at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
        at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        Truncated. see log file for complete stacktrace
>
<Sep 5, 2014 4:56:12 PM GST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Sep 5, 2014 4:56:12 PM GST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Sep 5, 2014 4:56:12 PM GST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Thanks

Never mind, the correct command is:
wls:/nm/IDMDomain> pr=makePropertiesObject("username=weblogic;password=weblogic0");
wls:/nm/IDMDomain> nmStart('AdminServer',props=pr);
It would be interesting however to have a list of all names of environmental variables that we can possibly set.
Cheers.

Remote PowerShell Connection to Lync Server With Kerberos authentication Fails

Hi everyone ,
Remote PowerShell to Lync Server With Kerberos authentication Fails .. Is there any reason for not being able to connect when authentication specified as Kerberos . But exactly same code works when Authentication is specified as "Negotiate"
E.g :
Error -
$session=New-PSSession -ConfigurationName Microsoft.Powershell -ConnectionUri https://serverName.lync.com/ocspowershell/ -Credential $cred -Authentication Kerberos
[serverName.lync.com] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. The authentication mechanism requested by the client is not supported by the server or unencrypted traffic is disabled in
the service configuration. Verify the unencrypted traffic setting in the service configuration or specify one of the authentication mechanisms supported by the server. To use Kerberos, specify the computer name as the remote destination. Also verify
that the client computer and the destination computer are joined to a domain.To use Basic, specify the computer name as the remote destination, specify Basic authentication and provide user name and password. Possible authentication mechanisms reported by
server:   Digest Negotiate For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
   eption
    + FullyQualifiedErrorId : PSSessionOpenFailed
Works -
$session=New-PSSession -ConfigurationName Microsoft.Powershell -ConnectionUri https://serverName.lync.com/ocspowershell/ -Credential $cred -Authentication Negotiate

Hi,
Please double check if Windows Update is the latest version, if not, please update and then test again.
Please also ensure that the workstation you are using has network access to the Certificate Authority that signed the certificate.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Server log having multiple Kerberos Authentication failed events

I my windows server log i can see so many Kerberos Authentication failure Events, Could you please explain why this is happening and how to resolve this?

Hello Friend,
here is the log
Time of Day
Name
Source Country
Destination IP
Destination Country
Destination Port
Event Count
2014-12-10 09
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
2
2014-12-10 08
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
6
2014-12-10 08
4768: A Kerberos Authentication Ticket (tgt) Was Requested
N/A
Not Reported
N/A
Not Reported
2
2014-12-10 08
4771: Kerberos Pre-authentication Failed
N/A
Not Reported
N/A
Not Reported
2
2014-12-10 07
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
14
2014-12-10 07
4768: A Kerberos Authentication Ticket (tgt) Was Requested
N/A
Not Reported
N/A
Not Reported
1
2014-12-10 06
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
12
2014-12-10 06
4768: A Kerberos Authentication Ticket (tgt) Was Requested
N/A
Not Reported
N/A
Not Reported
2
2014-12-10 05
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
16
2014-12-10 05
4768: A Kerberos Authentication Ticket (tgt) Was Requested
N/A
Not Reported
N/A
Not Reported
1
2014-12-10 04
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
22
2014-12-10 03
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
8
2014-12-10 03
4768: A Kerberos Authentication Ticket (tgt) Was Requested
N/A
Not Reported
N/A
Not Reported
1
2014-12-10 02
4624: An Account Was Successfully Logged On
N/A
0.0.0.0
N/A
Not Reported
11
2014-12-10 02
4768: A Kerberos Authentication Ticket (tgt) Was Requested
N/A
Not Reported
N/A
Not Reported
4

NetworkManager lead to WPA association/authentication failed

Hey, guys.
I cann't connect to WIFI using NetworkManager in Gnome 3 since a few days ago. Neither can I in the terminal using netctl.
And journalctl -xe says 'WPA association/authentication failed'.
I searched and found some people met the same problem, but I couldn't find a solution that worked for me.
Accidentally, I fount that after stoping NetworkManager (systemctl stop NetworkManager), I could connect to WIFI using netctl.
I found this solution when I did a first fresh installation of Arch on my office computer (I first met the problem on my personal computer).
So, it's the problem of NetworkManager? But it seems there isn't any people reporting this problem.
I wonder why does this problem arise and how could I get rid of it?
And have you met the same problem with NetworkManager?

Head_on_a_Stick wrote:
I have just recently switched away from NetworkManager in my GNOME setup and gone back to dhcpcd.service (it seems more in keeping with the Arch Way).
I had no problems with NetworkManager, but as JWR says you have to make sure all other network-related services are `disable`d (as well as `stop`ped)...
What is the output of:
systemctl --all --no-pager
The output is as follows:
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File
dev-cdrom.device loaded active plugged TSSTcorp_CDDVDW_TS-L633F
dev-disk-by\x2did-ata\x2dTSSTcorp_CDDVDW_TS\x2dL633F_R82E6GEB714119.device loaded active plugged TSSTcorp_CDDVDW_TS-L633F
dev-disk-by\x2did-ata\x2dWDC_WD7500BPVT\x2d24HXZT1_WD\x2dWXL1A6131290.device loaded active plugged WDC_WD7500BPVT-24HXZT1
dev-disk-by\x2did-ata\x2dWDC_WD7500BPVT\x2d24HXZT1_WD\x2dWXL1A6131290\x2dpart1.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Win
dev-disk-by\x2did-ata\x2dWDC_WD7500BPVT\x2d24HXZT1_WD\x2dWXL1A6131290\x2dpart2.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Arc
dev-disk-by\x2did-ata\x2dWDC_WD7500BPVT\x2d24HXZT1_WD\x2dWXL1A6131290\x2dpart3.device loaded active plugged WDC_WD7500BPVT-24HXZT1 3
dev-disk-by\x2did-ata\x2dWDC_WD7500BPVT\x2d24HXZT1_WD\x2dWXL1A6131290\x2dpart5.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Sof
dev-disk-by\x2did-ata\x2dWDC_WD7500BPVT\x2d24HXZT1_WD\x2dWXL1A6131290\x2dpart6.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Stu
dev-disk-by\x2did-ata\x2dWDC_WD7500BPVT\x2d24HXZT1_WD\x2dWXL1A6131290\x2dpart7.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Ent
dev-disk-by\x2did-ata\x2dWDC_WD7500BPVT\x2d24HXZT1_WD\x2dWXL1A6131290\x2dpart8.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Sto
dev-disk-by\x2did-wwn\x2d0x50014ee6ac298cc1.device loaded active plugged WDC_WD7500BPVT-24HXZT1
dev-disk-by\x2did-wwn\x2d0x50014ee6ac298cc1\x2dpart1.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Win
dev-disk-by\x2did-wwn\x2d0x50014ee6ac298cc1\x2dpart2.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Arc
dev-disk-by\x2did-wwn\x2d0x50014ee6ac298cc1\x2dpart3.device loaded active plugged WDC_WD7500BPVT-24HXZT1 3
dev-disk-by\x2did-wwn\x2d0x50014ee6ac298cc1\x2dpart5.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Sof
dev-disk-by\x2did-wwn\x2d0x50014ee6ac298cc1\x2dpart6.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Stu
dev-disk-by\x2did-wwn\x2d0x50014ee6ac298cc1\x2dpart7.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Ent
dev-disk-by\x2did-wwn\x2d0x50014ee6ac298cc1\x2dpart8.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Sto
dev-disk-by\x2dlabel-Arch.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Arc
dev-disk-by\x2dlabel-Entertainment.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Ent
dev-disk-by\x2dlabel-Software.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Sof
dev-disk-by\x2dlabel-Storage.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Sto
dev-disk-by\x2dlabel-Study.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Stu
dev-disk-by\x2dlabel-Windows7.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Win
dev-disk-by\x2duuid-06F8BE17F8BE0549.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Ent
dev-disk-by\x2duuid-16E807CFE807ABD5.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Win
dev-disk-by\x2duuid-6E64C85464C820A7.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Sto
dev-disk-by\x2duuid-824AAC0F4AAC0251.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Stu
dev-disk-by\x2duuid-933247f4\x2d9fa0\x2d4789\x2d8291\x2dbfde1dc9dce8.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Arc
dev-disk-by\x2duuid-A630853630850F0D.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Sof
dev-sda.device loaded active plugged WDC_WD7500BPVT-24HXZT1
dev-sda1.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Win
dev-sda2.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Arc
dev-sda3.device loaded active plugged WDC_WD7500BPVT-24HXZT1 3
dev-sda5.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Sof
dev-sda6.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Stu
dev-sda7.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Ent
dev-sda8.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Sto
dev-sr0.device loaded active plugged TSSTcorp_CDDVDW_TS-L633F
dev-ttyS0.device loaded active plugged /dev/ttyS0
dev-ttyS1.device loaded active plugged /dev/ttyS1
dev-ttyS2.device loaded active plugged /dev/ttyS2
dev-ttyS3.device loaded active plugged /dev/ttyS3
sys-devices-pci0000:00-0000:00:01.0-0000:01:00.0-backlight-acpi_video0.device loaded active plugged /sys/devices/pci0000:00/00
sys-devices-pci0000:00-0000:00:02.0-backlight-acpi_video1.device loaded active plugged /sys/devices/pci0000:00/00
sys-devices-pci0000:00-0000:00:02.0-drm-card0-card0\x2dLVDS\x2d1-intel_backlight.device loaded active plugged /sys/devices/pci0000:00/00
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 6 Series/C200 Series Chips
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-ieee80211-phy0-rfkill2.device loaded active plugged /sys/devices/pci0000:00/00
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-net-wlp3s0.device loaded active plugged Centrino Wireless-N 1000 [
sys-devices-pci0000:00-0000:00:1c.3-0000:04:00.0-net-enp4s0.device loaded active plugged RTL8111/8168/8411 PCI Expr
sys-devices-pci0000:00-0000:00:1f.0-PNP0C09:00-VPC2004:00-rfkill-rfkill0.device loaded active plugged /sys/devices/pci0000:00/00
sys-devices-pci0000:00-0000:00:1f.0-PNP0C09:00-VPC2004:00-rfkill-rfkill1.device loaded active plugged /sys/devices/pci0000:00/00
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Win
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Arc
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda3.device loaded active plugged WDC_WD7500BPVT-24HXZT1 3
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda5.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Sof
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda6.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Stu
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda7.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Ent
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda8.device loaded active plugged WDC_WD7500BPVT-24HXZT1 Sto
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged WDC_WD7500BPVT-24HXZT1
sys-devices-pci0000:00-0000:00:1f.2-ata5-host4-target4:0:0-4:0:0:0-block-sr0.device loaded active plugged TSSTcorp_CDDVDW_TS-L633F
sys-devices-platform-serial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/seri
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/seri
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/seri
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/seri
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-net-devices-enp4s0.device loaded active plugged RTL8111/8168/8411 PCI Expr
sys-subsystem-net-devices-wlp3s0.device loaded active plugged Centrino Wireless-N 1000 [
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File S
media-Entertainment.mount loaded active mounted /media/Entertainment
media-Software.mount loaded active mounted /media/Software
media-Storage.mount loaded active mounted /media/Storage
media-Study.mount loaded active mounted /media/Study
media-Windows7.mount loaded active mounted /media/Windows7
proc-sys-fs-binfmt_misc.mount loaded inactive dead Arbitrary Executable File
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
run-user-1000.mount loaded active mounted /run/user/1000
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests
systemd-ask-password-wall.path loaded active waiting Forward Password Requests
session-c2.scope loaded active running Session c2 of user vanitas
accounts-daemon.service loaded active running Accounts Service
atd.service loaded active running ATD daemon
● auditd.service not-found inactive dead auditd.service
bumblebeed.service loaded active running Bumblebee C Daemon
colord.service loaded active running Manage, Install and Genera
cronie.service loaded active running Periodic Command Scheduler
dbus.service loaded active running D-Bus System Message Bus
dhcpcd.service loaded active running dhcpcd on all interfaces
dm-event.service loaded inactive dead Device-mapper event daemon
emergency.service loaded inactive dead Emergency Shell
gdm.service loaded active running GNOME Display Manager
geoclue.service loaded active running Location Lookup Service
[email protected] loaded inactive dead Getty on tty1
goagent.service loaded active running GoAgent Service
httpd.service loaded active running Apache Web Server
kmod-static-nodes.service loaded active exited Create list of required st
ldconfig.service loaded inactive dead Rebuild Dynamic Linker Cac
logrotate.service loaded inactive dead Rotate log files
lvm2-lvmetad.service loaded inactive dead LVM2 metadata daemon
man-db.service loaded inactive dead Update man-db cache
mkinitcpio-generate-shutdown-ramfs.service loaded inactive dead Generate shutdown-ramfs
netctl.service loaded inactive dead (Re)store the netctl profi
netctl@wlp3s0\x2dPandoraBox.service loaded active exited Networking for netctl prof
● plymouth-quit-wait.service not-found inactive dead plymouth-quit-wait.service
● plymouth-quit.service not-found inactive dead plymouth-quit.service
● plymouth-start.service not-found inactive dead plymouth-start.service
polkit.service loaded active running Authorization Manager
rescue.service loaded inactive dead Rescue Shell
rtkit-daemon.service loaded active running RealtimeKit Scheduling Pol
shadow.service loaded inactive dead Verify integrity of passwo
● syslog.service not-found inactive dead syslog.service
systemd-ask-password-console.service loaded inactive dead Dispatch Password Requests
systemd-ask-password-wall.service loaded inactive dead Forward Password Requests
systemd-backlight@backlight:acpi_video0.service loaded active exited Load/Save Screen Backlight
systemd-backlight@backlight:acpi_video1.service loaded active exited Load/Save Screen Backlight
systemd-backlight@backlight:intel_backlight.service loaded active exited Load/Save Screen Backlight
systemd-binfmt.service loaded inactive dead Set Up Additional Binary F
systemd-firstboot.service loaded inactive dead First Boot Wizard
systemd-fsck-root.service loaded inactive dead File System Check on Root
systemd-initctl.service loaded inactive dead /dev/initctl Compatibility
systemd-journal-catalog-update.service loaded inactive dead Rebuild Journal Catalog
systemd-journal-flush.service loaded active exited Trigger Flushing of Journa
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-networkd.service loaded active running Network Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel Fi
[email protected] loaded active exited Load/Save RF Kill Switch S
[email protected] loaded active exited Load/Save RF Kill Switch S
[email protected] loaded active exited Load/Save RF Kill Switch S
systemd-shutdownd.service loaded inactive dead Delayed Shutdown Service
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-sysusers.service loaded inactive dead Create System Users
systemd-timesyncd.service loaded active running Network Time Synchronizati
systemd-tmpfiles-clean.service loaded inactive dead Cleanup of Temporary Direc
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and
systemd-udev-hwdb-update.service loaded inactive dead Rebuild Hardware Database
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-done.service loaded inactive dead Update is Completed
systemd-update-utmp.service loaded active exited Update UTMP about System B
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power managemen
[email protected] loaded active running User Manager for UID 1000
wpa_supplicant.service loaded active running WPA supplicant
-.slice loaded active active Root Slice
system-getty.slice loaded active active system-getty.slice
system-netctl.slice loaded active active system-netctl.slice
system-systemd\x2dbacklight.slice loaded active active system-systemd\x2dbackligh
system-systemd\x2drfkill.slice loaded active active system-systemd\x2drfkill.s
system.slice loaded active active System Slice
user-1000.slice loaded active active user-1000.slice
user.slice loaded active active User and Session Slice
dbus.socket loaded active running D-Bus System Message Bus S
dm-event.socket loaded active listening Device-mapper event daemon
lvm2-lvmetad.socket loaded active listening LVM2 metadata daemon socke
syslog.socket loaded inactive dead Syslog Socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility
systemd-journald-dev-log.socket loaded active running Journal Socket (/dev/log)
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active running udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
swapfile.swap loaded active active /swapfile
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
emergency.target loaded inactive dead Emergency Mode
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User System
network-pre.target loaded inactive dead Network (Pre)
network.target loaded active active Network
nss-lookup.target loaded inactive dead Host and Network Name Look
nss-user-lookup.target loaded inactive dead User and Group Name Lookup
paths.target loaded active active Paths
remote-fs-pre.target loaded inactive dead Remote File Systems (Pre)
remote-fs.target loaded active active Remote File Systems
rescue.target loaded inactive dead Rescue Mode
shutdown.target loaded inactive dead Shutdown
slices.target loaded active active Slices
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
time-sync.target loaded active active System Time Synchronized
timers.target loaded active active Timers
umount.target loaded inactive dead Unmount All Filesystems
logrotate.timer loaded active waiting Daily rotation of log file
man-db.timer loaded active waiting Daily man-db cache update
shadow.timer loaded active waiting Daily verification of pass
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
205 loaded units listed.
Should I disable dhcpcd.service to use NewworkManager?
Last edited by vanitas (2014-12-07 12:55:23)

SAP Business One Integration Services Authentication Failed

Dear ,
ALL SAP forum members,
Iam Using SAP Business One 8.81 PL 06, Micorsoft SQL 2008 R2
In SLD B1DI and JDBC, the connections were tested successfully.
Whenever I log into SBO, I am getting "SAP Business One Integration Services Authentication Failed" error message. I did extensive research on all possible SBO documents dating 1 year back especially in B1ic Troubleshooting Document (New and Old) and searched the length of the SBO forums, but I could not a solution.
I uninstalled and reinstalled the B1f package many a time. The integration services we re also restarted many times and the connections were all tested successfully. Firewall, AntiVirus also checked.
In the B1f, in the Monitoring Window, the login is "Ok" but the AuthCheck is "Failed". I checked Authent.Monitor->Authentic Info and I found the following message under Action message "Wrong Usrname and Password".
I debugged and i found again "/com.sap.b1i.vplatform.scenarios.authen/sap.Xcelsius/Authenticate_Check.bfd
But could not understand much of it.
But i could go no further. The experts are requested to suggest their solutions, If any, to me as Iam stuck in this phase for the last 3 week
I hope some experts will guide me over this issue
Thanks and regards
Ashish Gupte

Hi Konstantin Ryahovsky
Thanks for your reply. My problem is solved.
And frankly speaking i dont know how it was solved. I have not uninstall, install ,not even i had restarted the server also.
only change i did in SLD >> Maintainance >>> cfg Runtime >>>> Put server IP address instead of server Name and restarted the services.
Thanks & regards
Ashish Gupte

SOCKS Server Authentication- Failed

Similar Messages

Maybe you are looking for