SoD rule set Download issue

Hi All,
While downloading the SoD rule set (Global), I am not getting the data for Function-Action and Function-Permission, except these, rest of the data are coming.
But, I can get to see these data under tables: GRACFUNCACT and GRACFUNCPRM.
so obviously we can't have these data exported from table and to get converted into .txt format to upload SoD.
GRCFND_A is at SP14.
Please help in getting this issue resolved.
Thanks,
Ameet

Hi Ameet,
You have to reactivate it each time you install a SP in order to get the updates.
If you develelop your own SoD ruleset you wont use the SAP standard functions and risk, so reactivate the BC Set wont cause any problem.
If you change the standard functions and risks (which is wrong) such changes will be overwritten when reactivate the BC Set.
After reactivating the BC set you'll be able to download SoD rules fom the logical system SAP_R3_LG.
Cheers,
Diego.

Similar Messages

Re: Virsa Compliance Calibrator & Pre-defined SOD Rule Set

Hi All,
We have installed the Virsa Compliance calibrator 5.1 in our sandbox environment. When we goto the "Rule Architect" tab under Compliance calibrator using tcode /virsa/zvrat it brings up the page with Rules information.
Per the Virsa documents that i read they have mentioned that there are pre-defined SOD Rules (Transaction codes and Tcode objects) that we can use in the Rule Architect.
My question is how do i enable and use those pre-set SOD Rules that Virsa provides by default. I do not see them under the Rule architect tab though. Can someone give some pointers to use these pre-set SOD rules.
Thanks & Regards
-Murali

Hi Laziz,
Thanks for your patience in replying to my CC 5.1 queries. I did follow your steps for the Generate Rule & Background Job-> Schedule Analysis and scheduled the job immediate.
However, when i looked up the status of the scheduled analysis Background Job-> Search pulls up the job i scheduled at the top it reads "Job scheduler Status: unknown error" . I clicked on "View Log" button and it shows some messages as shown below (Note: I am just posting some parts of the error msgs below. but it still goes for 1 page...)
May 16, 2007 1:09:07 PM com.virsa.cc.xsys.bg.BgJobDaemon init
INFO: *** BgJobDaemon loaded
May 16, 2007 1:11:09 PM com.virsa.cc.common.util.ConfigUtil setDefaultJ2EEParam
WARNING: Cannot get Application URL: null. PLEASE SET 'Background Daemon URL' IN CONFIGURATION TAB
java.lang.NullPointerException
     at com.virsa.cc.common.util.ConfigUtil.setDefaultJ2EEParam(ConfigUtil.java:203)
     at com.virsa.cc.common.util.ConfigUtil.getBgJobStartURL(ConfigUtil.java:192)
     at com.virsa.cc.xsys.bg.AnalysisDaemonThread.run(AnalysisDaemonThread.java:45)
     at java.lang.Thread.run(Thread.java:534)
May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
FINEST: class name: com.virsa.cc.extreport.ReportPack50SP1_01.ReportPack50SP1_01 class: com/virsa/cc/extreport/ReportPack50SP1_01/ReportPack50SP1_01.class
May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
FINEST: Jar Entry length=1568 compressed size=1568 actual read=1568
May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
FINEST: class name: com.virsa.cc.extreport.ReportPack50SP1_01.CrtActbyRsk_Act_RskLvl class: com/virsa/cc/extreport/ReportPack50SP1_01/CrtActbyRsk_Act_RskLvl.class
May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
FINEST: Jar Entry length=13210 compressed size=13210 actual read=13210
May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
FINEST: class name: com.virsa.cc.extreport.ReportPack50SP1_01.CrtRolbyRsk class: com/virsa/cc/extreport/ReportPack50SP1_01/CrtRolbyRsk.class
May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
FINEST: Jar Entry length=19287 compressed size=19287 actual read=19287
May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
FINEST: class name: com.virsa.cc.extreport.ReportPack50SP1_01.CrtProfbyRsk class: com/virsa/cc/extreport/ReportPack50SP1_01/CrtProfbyRsk.class
May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
FINEST: Jar Entry length=12807 compressed size=12807 actual read=12807
May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
FINEST: class name: com.virsa.cc.extreport.ReportPack50SP1_01.UsersbyOrgLevels class: com/virsa/cc/extreport/ReportPack50SP1_01/UsersbyOrgLevels.class
May 16, 2007 1:24:37 PM com.virsa.cc.extreport.JarClassLoader loadClassData
FINEST: Jar Entry length=18557 compressed size=18557 actual read=18557
May 16, 2007 1:24:59 PM com.virsa.cc.common.util.ConfigUtil setDefaultJ2EEParam
WARNING: Cannot get Application URL: null. PLEASE SET 'Background Daemon URL' IN CONFIGURATION TAB
java.lang.NullPointerException
I am not sure whats causing this and it's been 2hrs since i scheduled the user analysis but i don't see any data still appearing in the fron-end..Any pointers again???
Thanks
-Murali

SAP IS-Media SoD Rule Set

Hi Everyone
I would like to know if anyone have a rule set for the IS-Media SAP solution, specially for the M/SD and M/PS modules

Hi Ricardo,
A few years ago I was looking for IS specific rule sets also, but it seems that there is no SAP standard developed version openly available. I know some GRC implementing specialists (and audit companies) have built up so called "Starter" rule sets for IS solutions, but to get your hands on it, you would have to involve them in your project and allow them to devise a custom governance framework and rule set for your company (i.e. pay for their services and intellectual property).
From personal experience, if you have a confident understanding of the SAP standard rule set, you could relate IS specific t codes to the standard ECC tcodes and make custom functions and risks similar to the ones in the SAP standard rule set.
In addition, I would also get function specialists, Internal and External Audit involved and see if any risks have been reported in regards to your IS-Media transactions/processes and see if you can write your own rules up with the information at hand.
If you feel you have little confidence in trying to device your custom rules and instead need the professional help, it may be worth reaching out to your auditors or the GRC specialists to help you devise the ruleset.
Hope that helps.

GRC Upgrade 4.7 to 5.3 - Rule Set Upload

Questions about upgrade from 4.7 to 5.3
Work in corporate conglomerate that consists of 4 independent business units each with own SOD rule set:
u2022How do we upload each independent set of rule sets so they can coexist within GRC 5.3?
u20224.7 mapping of files to 5.3 naming conventions u2013 see 4.7 rule set download below
CONFIG
CR_PROFS
CR_PROFST
CR_ROLES
CR_ROLEST
CR_TRANS
CR_TRANST
SOD_OBECT01
SOD_OBECT02
SOD_OBECT03
SOD_OBECTT
SOD_TCODE
SOD_TCODET

Alpesh
We are trying to upload our existing SOD 4.7 rules using the 5.3 the configuration tab u2013 rule upload. We are having difficulties associating old 4.7 SOD files names to the 5.3 SOD file names. Is this the correct location within 5.3 to associate a physical system to a specific set of SOD rule sets? If not could you please point us to correct location within 5.3.
Thanks

FBL5N - in Rule set - It is a Display customer line items

Dear All,
We observed that FBL5N - Display customer line items in Standard SoD rule set under function AR07 addressing a risk of S022.
Unless there are t-codes of FD03 or FB02 this t-code does not allow to change the payment terms of the customer.
We are having a challenge from the client that FBL5N is a display t-code and why it is there in rule set.
Has anybody came across this scenario? If yes, what is the underlying risk for this FBL5N independently.
Is there any SAP Note for this t-code like ME23N from SAP.
Thanks and Best Regards,
Srihari.K

Hi Christian,
We checked the authorization objects as well enabled in GRC rule set as below:
F_BKPF_BUK - Docume t Authorization document for company codes - 01 or 02 - Enable.
Inspite of this access, FBL5N cannot be used to change the document for payment terms and assignments without FB02 t-code
assignment in the role.
Independently FBL5N cannot be used for any change or create activity except Display customer line items.
Please advise
Thanks and Best Regards,
Srihari.K

Rule set Updates

We started with Virsa CC 5.1 in 2006 now we are using CC 5.2
If I go to the SAP Note 1173980 u2013 Q2 2008. Do I find all the Rule
Updates from 2006 to 2008 or we need to implement all the below Virsa
Rule updates.
1061380 u2013 Q2 2006
1035070 u2013 Q1 2007
1083611 u2013 Q3 2007
1173980 u2013 Q2 2008

HI:
You need to review each set of updates, and determine if they are applicable for your system. Each subsequent rule set update issued does NOT include previous entries.
It is up to each client to customize entries in the updates per their own requirements, but just taking the last one, means that you may miss some of the important updates in previous updates.
Margaret

Downloading a single rule set out of N rule sets.

HI All,
We have defined 4 Rule sets for one particular system. Out of these one is the global rule set. Now, my requirement is to have oe more rule set, with 80% rules from global and then add the rest 20% myself. Would like to know if there is any way we can achieve this efficiently, other than creating manually all the 80% rules from GLOBAL rule set.
Thanks a lot in advance.
Regards,
Hersh

HI Jose,
Well what you guided was perfectly fine an true in case of making changes to GLOBAL rule set. But any idea how we can make a new rule set out of the custom rule set i have already made.
I have , in all 4 rule sets present at the moment in GRC - GLOBAL, CUST -1,2 and 3. Now, my requirement is to have a copy of CUST1 into new rule set CUST4, and I manually later on need to update CUST4 for some more risks in it. The problem i am facing is whenever i download the existing rule sets, it is not giving me an option to download just CUST1, but all of four rule sets get downloaded together. Whereas, i need just a copy of CUST1. Any ideas on this?
Regards,
Hersh.

Rules Set Issues and Information

Hi every one,
I am running a Rule Set.
In Job Console it still shows processing after a while, instead it should be showing completed status, when I expand the rule set in job console to watch the problem it shows that 1 rule is in still processing.
I ran the rule again and still the same issue, but this time when i expand the rule set, the order in which the business rule should execute is changed and a different rule is shown in processing which is being completed in the last attempt.
1)Does any one have any clue how to solve this issue? Or what is causing this Issue?
2)The rules in rule set runs in the same sequence as defined in rule set? or they just run randomly? why job console shows as if these rules are executed randomly??
Regards.

Hi Mehmet,
With due respect, I think the user11978217 might be facing the issue mentioned in Oracle doc. +Hyperion Planning Job Console Shows Incorrect Information About job completion. [ID 1429796.1]+, wherein planning job console shows running status but if we see the sessions in EAS console we don't find any for concerned request.
Hi user11978217,
If you see the last column in Sessions window which is "Request Status", you would see the status of one of the session as running/processing whenever you would execute the Rule Set or for that matter any calculation or request. If the Rule Set is executed completely, this session which was showing status as Running/Processing would disappear, on refresh.
Hope this helps.
Regards,
-SM

How to migrate Master Data (Rule set etc.) from GRC 5.3 to 10.1 without using the "Migration Tool"

Greetings,
We are currently on GRC 5.3 SP 18 (Java ONLY) and migrating to GRC 10.1. I referred the Migration Guide which outlines that GRC 5.3 needs to be upgraded to SP 20 as pre-requisite for using the "Migration Tool" . Our BASIS team is reluctant to perform this upgrade from SP 18 to SP 20.
Having said thus, I'm exploring options of migrating data from 5.3 to 10.1 without using the "Migration Tool:.
Rule set Migration:
I'm in the process of preparing the 9 different files (listed below) and later utilize the "Upload Rule" option for migrating the Rule set data from 5.3 to 10.1.
While I'm able to gather data for most of the files I'm not sure how can I obtain the data pertaining to the two files (Function Actions and Function Permissions) underlined and highlighted in Red below.
1. Business Process
2. Function
3. Function Business Process
4. Function Actions
5 .Function Permissions
6. Rule Set
7. Risk
8. Risk Description
9. Risk Rule Set Relationship
10. Risk Owner Relationship
Can someone please enlighten me and share their experience with regards to this exercise. Really appreciate your help !
- Janantik.

I have done this successfully before. Because you are having issues, I would NOT recommend using the migration tool to move the ruleset. Instead:
1. Download the ruleset files from 5.3
2. The 5.3 tcode-permission file, which defines which tcode permissions from SU24 need to be checked during risk analysis, needs to be split into the two files you mention above in red.
FUNCTION_ACTION : this file represents S_TCODE objects and TCD fields mapped to each function (Function to Tcode relationship). In the 5.3 file, you will filter on object S_TCODE and field TCD, and you will get a complete list that now represents "FUNCTION_ACTION". BUT instead of having all the jumbled permission info, you will just have 3 columns: Function - Tcode - Status.
3. The remaining permissions that are left over, after taking out the S_TCODE -TCD items, represent the "FUNCTION_PERMISSION" file in GRC 10.
4. Manually create the excel spreadsheets for each file.
5. Copy and past each sheet to a unique .txt file.
6. Upload the ruleset manually through SPRO-->GRC-->Access Control-->Access Risk Analysis-->SoD Rules-->Upload SoD Rules.
7. Select each file and then upload to the correct Logical Group.
This is a huge pain, but it works. Let me know how this goes and if you need any assistance.
-Ken

Mulltiple Rule Sets in GRC 10.0 for one System

Hi All,
We do have 2 different companies working on one system and by that 2 different rule sets that are applicable.
Due to that we are facing different problems we don't know how to solve yet but lets start with the first one dealing with the rule set that should be used in the access request.
We want to determin which rule set should be used over the requested role (e.g. if role name contains 0001 use rule set 0001, if role name contains 0002 use rule set 0002).
We have alerady tried several different senarios in BRF+ without success.
Does anybody have a solution or at least an idea for this topic?
Thank you all very much in advance!
Eva

Hi Ashish ,
Thanks for your time . Let me explain you my requirement and would really appreciate if you would have some inputs here which would help me to design this .
The actual client requirement is to design a CUP Workflow and If there are SOD issues identified, the workflow will need to go to a central team for them to address each issue. If this group decides to apply mitigating controls to the issues, the workflow must then go to the compliance group for them to review for appropriateness. Requirement is do a SoD analysis for every role change/add request , so that this group takes the appropriate action based on the SoD Analysis . For all my CUP request raised , i want system to do a SoD analysis and let this group know whenever there is a SoD found or just end the workflow if there is no risk.
I am aware of the Risk analysis process for GRC 10.0 , however i want it to happen as a part of this work flow requirement.
The requirement is to configure the access request work flow so that the end goal of work flow is just facilitation of an SOD review. I hope i was able to explain my requirement . Thanks again for your help.
Your valuable guidance would be really appreciated.
Vikas

GRC Risk analysis reports are not checking all possible risk conflicts set up in the rule set that lead to risks.

Dear All,
After running the risk analysis it shows only the first conflict for a risk in the rule set (Rule ID 0001). We have already Generated SOD ruleset. Also during migration from 5.3 to AC10.1 all the rulesets were imported properly.
What could be reason??
Thanks for your help.
Regards,
Abhisshek

Abhisshek,
there is already a thread with the same question: Dear all I only get result for one rule id and not with others what should be an issue?
Regards,
Alessandro

Updation of Rule-set in GRC10

Hi,
There is a requirement for us to update few risks(objects within the risk) for our non-business ruleset. What is the best suggested method to do this?
->Directly update from NWBC
->Download Rule-set and upload from SPRO
->Transport
If any body can share their suggestions and steps, it would be great.
Thanks,
Sabitha

Hello Sabitha,
This is because you haven't created the connectors in DEV. do you have that connectors in SM59?? I recoomend to create the connectors and associate the to the logical system just to keep all the systems with the same info. you can create the connectors but it's not neccesary to fill all the data in SM59. Just create the connector with the name would be fine.
If i modify the ruleset based on the connector group in development and transport the ruleset would all the physical systems still be listed in the drop down in Quality and Prod
Yes, this will be deleted only if you transport the logical system configuration from DEV and it's not related to SoD rules transport.
If we modify the ruleset based on connector group in development and transport , would it cause any inconsistency as it looks like the Quality and Prod the physical connectors are linked to the ruleset
No. if you are working with the logical system and you haven't uploaded rules to the physical ones it has no effect.
From your comment I understand that it does not matter about the physical systems as rule generation would take care of generating/linking the ruleset based on the systems assigned to the Connector Group/Logical Systems- If this is the case I am wondering why in development system even after the generation of rule-sets the physical systems are not available
This is because you haven't created the connector or you haven't linked the connectors to te connector groups or you haven't enabled the connectors for the auth scenario.
When generating rules the system generates the rules for the necessary logical systems. since you have none in DEV it wont generate rules for your scenario. So in the escenario you are describing in DEV with logical connectors but no physical ones you shouldn't be able to execute a risk analysis there.
Cheers,
Diego.

Mass RAR Rule Set Changes

My integrator is telling me that there is no way to complete a mass update to the authorizations/restrictions in our RAR rule set (AC 5.3.) That is, at the recommendation of our external auditor, we added additional transactions to existing rules but failed to activate the company code restrictions to ignore display only access and therefore, I am receiving a significant number of SODs which are false positives.
I find it hard to believe that there is no easy way to activate the company code authorization objects (and others) for the additional transactions in the rule set. The integrator is telling me that this has to be done one by one. Please tell me that there is an easier way.
Apologies if this is a repeat; if this topic is out there, could someone point me in the right direction?Thank you in advance!
Thank you in advance!

Is there any easy way? Depends on what you think is easy
For mass updates to function I will typically use the: Configuration -> Rule Upload feature. To perform an update to an authorization object, you would use the 'Function Authorization' selection.
To upload the function you'd want to use the file formats from the 9 upload files SAP provides for the ruleset. If I recall correctly, function uploads will overwrite the existing function so it is important that your upload file contains all existing function data + the additional auth objects you want to activiate.
As with any text file manipulation and download/upload or export/import features into GRC you want to be particulary careful with formatting and attention to detail. Probably a good idea to take a backup of the rules if this is your first time working with the ruleset files.

Com.bea.p13n.rules.manager.RuleSetNotFoundException: The rule set with URI /segments/GlobalClassifications.rls could not be located by the class named com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager

Hi,
I am getting below exceptions in weblogic portal 10.3.5 which is upgraded from 10.3.4 portal. I have a datasync project .when try to run from workshop(eclipse IDE) getting below error.
com.bea.p13n.servlets.jsp.JspException: DivTag: The retrieved advice is incomplete. See the processing error list for more information.
com.bea.p13n.advisor.internal.AdviceImpl@299d48
Identifier: 1377808035572
Complete: true
Last Result: null
ProcessingError List:
(1) com.bea.p13n.advisor.internal.ProcessingErrorImpl@1504ee
Description: Exception evaluating ruleset.
Source: com.bea.p13n.rules.advislets.RulesAdvisletImpl@e6d518
Advisor: com.bea.p13n.advisor.internal.AdvisorImpl@b04a4e
Metadata: com.bea.p13n.common.internal.MetadataImpl@1de62ee
Name: UnmappedRulesAdvislet
Description: Advislet that can evalaute a ruleset and return the instantiated objects.
Author: BEA Systems
Version: com.bea.p13n.common.internal.VersionImpl@13130a2 Description: WLP 9.2 Number: 9.2, Build Number 1.
Parameters: {ruleset-name=/segments/GlobalClassifications.rls, ignore-rule-name=false}
User data: null
Exception: com.bea.p13n.rules.manager.RuleSetNotFoundException: The rule set with URI /segments/GlobalClassifications.rls could not be located by the class named com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.
at com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.getRuleSet(RuleSetPersistenceManager.java:408)
at com.bea.p13n.rules.manager.internal.ContextPool.<init>(ContextPool.java:149)
at com.bea.p13n.rules.manager.internal.ContextPoolFactory.getContextPool(ContextPoolFactory.java:214)
at com.bea.p13n.rules.manager.internal.RulesManagerImpl.getContext(RulesManagerImpl.java:480)
at com.bea.p13n.rules.manager.internal.RulesManagerImpl.evaluate(RulesManagerImpl.java:353)
at com.bea.p13n.rules.manager.internal.RulesManagerImpl.evaluateRule(RulesManagerImpl.java:194)
at com.bea.p13n.rules.manager.internal.RulesManager_jswjkk_EOImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at com.bea.p13n.rules.manager.internal.RulesManager_jswjkk_EOImpl.evaluateRule(Unknown Source)
at com.bea.p13n.rules.advislets.RulesAdvisletImpl.getAdvice(RulesAdvisletImpl.java:190)
at com.bea.p13n.advisor.internal.AdvisorImpl.getAdvice(AdvisorImpl.java:74)
at com.bea.p13n.advisor.internal.CompoundAdvisletImpl.getAdvice(CompoundAdvisletImpl.java:88)
at com.bea.p13n.advisor.internal.AdvisorImpl.getAdvice(AdvisorImpl.java:74)
at com.bea.p13n.advisor.internal.EjbAdvisorImpl.getAdvice(EjbAdvisorImpl.java:62)
at com.bea.p13n.advisor.internal.EjbAdvisor_t707wa_EOImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at com.bea.p13n.advisor.internal.EjbAdvisor_t707wa_EOImpl.getAdvice(Unknown Source)
at com.bea.p13n.servlets.jsp.taglib.DivTag.includeBody(DivTag.java:103)
at com.bea.p13n.servlets.jsp.taglib.DivTag.doStartTag(DivTag.java:169)
at jsp_servlet._portlets._footerlinks.__footerlinks._jspService(__footerlinks.java:247)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at com.bea.netuix.servlets.filters.IncludeSecurityFilter.doFilter(IncludeSecurityFilter.java:103)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:558)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:485)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:399)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326)
at com.bea.netuix.nf.UIControl.render(UIControl.java:582)
at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:488)
at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:152)
at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62)
at jsp_servlet._framework._skeletons._ceoportal.__flowlayout._jspService(__flowlayout.java:139)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:148)
at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72)
at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:399)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326)
at com.bea.netuix.nf.UIControl.render(UIControl.java:582)
at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:488)
at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:152)
at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62)
at jsp_servlet._framework._skeletons._ceoportal.__gridlayout._jspService(__gridlayout.java:357)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:148)
at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72)
at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:399)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:465)
at com.bea.netuix.servlets.manager.UIServlet.processControlTree(UIServlet.java:373)
at com.bea.netuix.servlets.manager.PortalServlet.service(PortalServlet.java:993)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at com.bea.content.manager.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:178)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3729)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3695)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2285)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2184)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1459)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

The following document describes about how datasync data is deployed in various scenarios.
http://download.oracle.com/docs/cd/E13218_01/wlp/docs100/prodOps/preparing.html#wp1029497
Assuming you are making use of workshop for creating the user segment and deploying to a single server which is in development mode, I would recommend you check if you have hit any OOM issues on the server or not, and try restarting the server, and redeploying your app. Generally this should resolve the issue.
If the server to which you are deploying is running in production mode / deploying as an EAR then the above referred doc will guide you on the next steps.

I have messages in mail that are color-coded as if by a rule, but I have no rules set. How can I correct this?

The only rule that I ever had in Mail was the default one that color coded messages from Apple blue. I notice that some messages are color-coded brown and I have no rules set at al (hence no rule to turn off.) Some of the messages are related to viewing online magazine, but not all. How can I stop this?

Hi. Thanks for your message.
Well, I understand what you are trying to say but I thought it was easier to categorize in Apple Mail.
On Entourage I just click twice on a sender address, record it on Address book and give it a colour that I previously defined as "Work", "Personal", "Customers", "Suppliers", "Friends" or whatever.
As Apple Mail don't have Address Book as part of it but an outside feature it's very annoying. Of course I am used to use a software and I don't expect now Apple Mail do everything as Entourage but... as someone said it seems Apple Mail stopped in time. The recent version seems the first one ever issued. I hate the way Mail.app handles attachments by placing big chunky previews right in my email. I prefer them to be named attachments listed somewhere else, out of the content of my email. I don't if I can change this via terminal commands? Can you tell me if that is possible?
I don't understand why Apple Mail have lots of plugins instead of a great improvment from the backstage.
I use Apple computers since ever and I love this machines but sometimes I don't understand this lake of improvments.
Take a look at this link:
http://scottworldblog.wordpress.com/2009/10/12/microsoft-entourage-vs-apple-mail /
Of course I don't agree 100% with him but some things are true...

SoD rule set Download issue

Similar Messages

Maybe you are looking for